Implications of query caching for JXTA peers

This dissertation studies the caching of queries and how to cache in an efficient way, so that retrieving previously accessed data does not need any intermediary nodes between the data-source peer and the querying peer in super-peer P2P network. A precise algorithm was devised that demonstrated how queries can be deconstructed to provide greater flexibility for reusing their constituent elements. It showed how subsequent queries can make use of more than one previous query and any part of those queries to reconstruct direct data communication with one or more source peers that have supplied data previously. In effect, a new query can search and exploit the entire cached list of queries to construct the list of the data locations it requires that might match any locations previously accessed. The new method increases the likelihood of repeat queries being able to reuse earlier queries and provides a viable way of by-passing shared data indexes in structured networks. It could also increase the efficiency of unstructured networks by reducing traffic and the propensity for network flooding. In addition, performance evaluation for predicting query routing performance by using a UML sequence diagram is introduced. This new method of performance evaluation provides designers with information about when it is most beneficial to use caching and how the peer connections can optimize its exploitation.

Provision of pharmaceutical care by community pharmacists:a comparison across Europe

Objective To investigate the provision of pharmaceutical care by community pharmacists across Europe and to examine the various factors that could affect its implementation. Methods A questionnaire-based survey of community pharmacies was conducted within 13 European countries. The questionnaire consisted of two sections. The first section focussed on demographic data and services provided in the pharmacy. The second section was a slightly adapted version of the Behavioral Pharmaceutical Care Scale (BPCS) which consists of three main dimensions (direct patient care activities, referral and consultation activities and instrumental activities). Results Response rates ranged from 10–71% between countries. The mean total score achieved by community pharmacists, expressed as a percentage of the total score achievable, ranged from 31.6 (Denmark) to 52.2% (Ireland). Even though different aspects of pharmaceutical care were implemented to different extents across Europe, it was noted that the lowest scores were consistently achieved in the direct patient care dimension (particularly those related to documentation, patient assessment and implementation of therapeutic objectives and monitoring plans) followed by performance evaluation and evaluation of patient satisfaction. Pharmacists who dispensed higher daily numbers of prescriptions in Ireland, Germany and Switzerland had significantly higher total BPCS scores. In addition, pharmacists in England and Ireland who were supported in their place of work by other pharmacists scored significantly higher on referral and consultation and had a higher overall provision of pharmaceutical care. Conclusion The present findings suggest that the provision of pharmaceutical care in community pharmacy is still limited within Europe. Pharmacists were routinely engaged in general activities such as patient record screening but were infrequently involved in patient centred professional activities such as the implementation of therapeutic objectives and monitoring plans, or in self-evaluation of performance.

Desalination of brackish water by a batch reverse osmosis desalink system for use with solar thermal energy

For remote, semi-arid areas, brackish groundwater (BW) desalination powered by solar energy may serve as the most technically and economically viable means to alleviate the water stresses. For such systems, high recovery ratio is desired because of the technical and economical difficulties of concentrate management. It has been demonstrated that the current, conventional solar reverse osmosis (RO) desalination can be improved by 40–200 times by eliminating unnecessary energy losses. In this work, a batch-RO system that can be powered by a thermal Rankine cycle has been developed. By directly recycling high pressure concentrates and by using a linkage connection to provide increasing feed pressures, the batch-RO has been shown to achieve a 70% saving in energy consumption compared to a continuous single-stage RO system. Theoretical investigations on the mass transfer phenomena, including dispersion and concentration polarization, have been carried out to complement and to guide experimental efforts. The performance evaluation of the batch-RO system, named DesaLink, has been based on extensive experimental tests performed upon it. Operating DesaLink using compressed air as power supply under laboratory conditions, a freshwater production of approximately 300 litres per day was recorded with a concentration of around 350 ppm, whilst the feed water had a concentration range of 2500–4500 ppm; the corresponding linkage efficiency was around 40%. In the computational aspect, simulation models have been developed and validated for each of the subsystems of DesaLink, upon which an integrated model has been realised for the whole system. The models, both the subsystem ones and the integrated one, have been demonstrated to predict accurately the system performance under specific operational conditions. A simulation case study has been performed using the developed model. Simulation results indicate that the system can be expected to achieve a water production of 200 m3 per year by using a widely available evacuated tube solar collector having an area of only 2 m2. This freshwater production would satisfy the drinking water needs of 163 habitants in the Rajasthan region, the area for which the case study was performed.

The B-Terminal Busy Probability Prediction

In the teletraffic engineering of all the telecommunication networks, parameters characterizing the terminal traffic are used. One of the most important of them is the probability of finding the called (B-terminal) busy. This parameter is studied in some of the first and last papers in Teletraffic Theory. We propose a solution in this topic in the case of (virtual) channel systems, such as PSTN and GSM. We propose a detailed conceptual traffic model and, based on it, an analytical macro-state model of the system in stationary state, with: Bernoulli– Poisson–Pascal input flow; repeated calls; limited number of homogeneous terminals; losses due to abandoned and interrupted dialling, blocked and interrupted switching, not available intent terminal, blocked and abandoned ringing and abandoned conversation. Proposed in this paper approach may help in determination of many network traffic characteristics at session level, in performance evaluation of the next generation mobile networks.

Bit error rate estimation methods for QPSK CO-OFDM transmission

Coherent optical orthogonal frequency division multiplexing (CO-OFDM) is an attractive transmission technique to virtually eliminate intersymbol interference caused by chromatic dispersion and polarization-mode dispersion. Design, development, and operation of CO-OFDM systems require simple, efficient, and reliable methods of their performance evaluation. In this paper, we demonstrate an accurate bit error rate estimation method for QPSK CO-OFDM transmission based on the probability density function of the received QPSK symbols. By comparing with other known approaches, including data-aided and nondata-aided error vector magnitude, we show that the proposed method offers the most accurate estimate of the system performance for both single channel and wavelength division multiplexing QPSK CO-OFDM transmission systems. © 2014 IEEE.

Cramer-Rao bound analysis of location estimation in multi-hop wireless sensor networks

Location estimation is important for wireless sensor network (WSN) applications. In this paper we propose a Cramer-Rao Bound (CRB) based analytical approach for two centralized multi-hop localization algorithms to get insights into the error performance and its sensitivity to the distance measurement error, anchor node density and placement. The location estimation performance is compared with four distributed multi-hop localization algorithms by simulation to evaluate the efficiency of the proposed analytical approach. The numerical results demonstrate the complex tradeoff between the centralized and distributed localization algorithms on accuracy, complexity and communication overhead. Based on this analysis, an efficient and scalable performance evaluation tool can be designed for localization algorithms in large scale WSNs, where simulation-based evaluation approaches are impractical. © 2013 IEEE.

A New Charging and Billing Model and Architecture for the Ubiquitous Consumer Wireless World

In a Ubiquitous Consumer Wireless World (UCWW) environment the provision, administration and management of the authentication, authorization and accounting (AAA) policies and business services are provided by third-party AAA service providers (3P-AAA-SPs) who are independent of the wireless access network providers (ANPs). In this environment the consumer can freely choose any suitable ANP, based on his/her own preferences. This new AAA infrastructural arrangement necessitates assessing the impact and re-thinking the design, structure and location of ‘charging and billing’ (C&B) functions and services. This paper addresses C&B issues in UCWW, proposing potential architectural solutions for C&B realization. Implementation approaches of these novel solutions together with a software testbed for validation and performance evaluation are addressed.

Phase noise tolerance study in coherent optical circular QAM transmissions with Viterbi- Viterbi carrier phase estimation

We present a performance evaluation of a non-conventional approach to implement phase noise tolerant optical systems with multilevel modulation formats. The performance of normalized Viterbi-Viterbi carrier phase estimation (V-V CPE) is investigated in detail for circular m-level quadrature amplitude modulation (C-mQAM) signals. The intrinsic property of C-mQAM constellation points with a uniform phase separation allows a straightforward employment of V-V CPE without the need to adapt constellation. Compared with conventional feed-forward CPE for square QAM signals, the simulated results show an enhanced tolerance of linewidth symbol duration product (ΔvTs) at a low sensitivity penalty by using feed-forward CPE structure with C-mQAM. This scheme can be easily upgraded to higher order modulations without inducing considerable complexity.

Real-time error compensation of a three-axis machine tool using a laser tracker

The concept of measurement-enabled production is based on integrating metrology systems into production processes and generated significant interest in industry, due to its potential to increase process capability and accuracy, which in turn reduces production times and eliminates defective parts. One of the most promising methods of integrating metrology into production is the usage of external metrology systems to compensate machine tool errors in real time. The development and experimental performance evaluation of a low-cost, prototype three-axis machine tool that is laser tracker assisted are described in this paper. Real-time corrections of the machine tool's absolute volumetric error have been achieved. As a result, significant increases in static repeatability and accuracy have been demonstrated, allowing the low-cost three-axis machine tool to reliably reach static positioning accuracies below 35 μm throughout its working volume without any prior calibration or error mapping. This is a significant technical development that demonstrated the feasibility of the proposed methods and can have wide-scale industrial applications by enabling low-cost and structural integrity machine tools that could be deployed flexibly as end-effectors of robotic automation, to achieve positional accuracies that were the preserve of large, high-precision machine tools.

On the impossibility of fair risk allocation

Measuring and allocating risk properly are crucial for performance evaluation and internal capital allocation of portfolios held by banks, insurance companies, investment funds and other entities subject to financial risk. We show that by using a coherent measure of risk it is impossible to allocate risk satisfying the natural requirements of (Solution) Core Compatibility, Equal Treatment Property and Strong Monotonicity. To obtain the result we characterize the Shapley value on the class of totally balanced games and also on the class of exact games.

Tőkeallokáció nem likvid portfóliók esetén (Risk capital allocation in case of illiquid portfolios)

A kockázat jó mérése és elosztása elengedhetetlen a bankok, biztosítók, befektetési alapok és egyéb pénzügyi vállalkozások belső tőkeallokációjához vagy teljesítményértékeléséhez. A cikkben bemutatjuk, hogy a koherens kockázati mértékek axiómáit nem likvid portfóliók esetén is el lehet várni. Így mérve a kockázatot, ismertetünk a kockázatelosztásra vonatkozó két kooperatív játékelméleti cikket. Az első optimista, eszerint mindig létezik stabil, az alegységek minden koalíciója által elfogadható, általános módszer a kockázat (tőke) elosztására. A második cikk pesszimista, mert azt mondja ki, hogy ha a stabilitás mellett igazságosak is szeretnénk lenni, akkor egy lehetetlenségi tételbe ütközünk. / === / Measuring and allocating risk properly are crucial for performance evaluation and internal capital allocation of portfolios held by banks, insurance companies, investment funds and other entities subject to fi nancial risk. We argue that the axioms of coherent measures of risk are valid for illiquid portfolios as well. Then, we present the results of two papers on allocating risk measured by a coherent measure of risk. Assume a bank has some divisions. According to the fi rst paper there is always a stable allocation of risk capital, which is not blocked by any coalition of the divisions, that is there is a core compatible allocation rule (we present some examples for risk allocation rules). The second paper considers two more natural requirements, Equal Treatment Property and Strong Monotonicity. Equal Treatment Property makes sure that similar divisions are treated symmetrically, that is if two divisions make the same marginal risk contribution to all the coalition of divisions not containing them, then the rule should allocate them the very same risk capital. Strong Monotonicity requires that if the risk environment changes in such a way that the marginal contribution of a division is not decreasing, then its allocated risk capital should not decrease either. However, if risk is evaluated by any coherent measure of risk, then there is no risk allocation rule satisfying Core Compatibility, Equal Treatment Property and Strong Monotonicity, we encounter an impossibility result.

On the impossibility of fair risk allocation

Measuring and allocating risk properly are crucial for performance evaluation and internal capital allocation of portfolios held by banks, insurance companies, investment funds and other entities subject to financial risk. We show that by using coherent measures of risk it is impossible to allocate risk satisfying simultaneously the natural requirements of Core Compatibility, Equal Treatment Property and Strong Monotonicity. To obtain the result we characterize the Shapley value on the class of totally balanced games and also on the class of exact games.

Civil service reform trends in public personnel management: Experiences from the Commonwealth of the Bahamas

This study has explored the potential for implementing a merit-based public personnel system in The Bahamas, a former British colony in The Commonwealth Caribbean. Specifically, the study evaluated the use of merit-based public personnel management practices in areas of recruitment, selection, promotion, training and employee development and performance evaluation. Driving forces and barriers which impact merit system successes and failures as well as strategies for institutionalizing merit system practices are identified. Finally the study attempted to apply the developmental model created by Klingner (1996) to describe the stage of public personnel management in The Bahamas. The data for the study was collected through in-depth interviews with expert observers. ^

Development of ``HealthServe'': A measure of customer service orientation in healthcare

An assessment tool designed to measure a customer service orientation among RN's and LPN's was developed using a content-oriented approach. Critical incidents were first developed by asking two samples of healthcare managers (n = 52 and 25) to identify various customer-contact situations. The critical incidents were then used to formulate a 121-item instrument. Patient-contact workers from 3 hospitals (n = 102) completed the instrument along with the NEO-FFI, a measure of the Big Five personality factors. Concurrently, managers completed a performance evaluation scale on the employees participating in the study in order to determine the predictive validity of the instrument.^ Through a criterion-keying approach, the instrument was scaled down to 38 items. The correlation between HealthServe and the supervisory ratings of performance evaluation data supported the instrument's criterion-related validity (r =.66, p $<$.0001). Incremental validity of HealthServe over the Big Five was found with HealthServe accounting for 46% of the variance.^ The NEO-FFI was used to assess the correlation between personality traits and HealthServe. A factor analysis of HealthServe suggested 4 factors which were correlated with the NEO-FFI scores. Results indicated that HealthServe was related to Extraversion, Openness to Experience, Agreeableness, Conscientiousness and negatively related to Neuroticism.^ The benefits of the test construction procedure used here over the use of broad-based measures of personality were discussed as well as the limitations of using a concurrent validation strategy. Recommendations for future studies were provided. ^

Development of prediction models for freeway incident durations using data mining techniques

The nation's freeway systems are becoming increasingly congested. A major contribution to traffic congestion on freeways is due to traffic incidents. Traffic incidents are non-recurring events such as accidents or stranded vehicles that cause a temporary roadway capacity reduction, and they can account for as much as 60 percent of all traffic congestion on freeways. One major freeway incident management strategy involves diverting traffic to avoid incident locations by relaying timely information through Intelligent Transportation Systems (ITS) devices such as dynamic message signs or real-time traveler information systems. The decision to divert traffic depends foremost on the expected duration of an incident, which is difficult to predict. In addition, the duration of an incident is affected by many contributing factors. Determining and understanding these factors can help the process of identifying and developing better strategies to reduce incident durations and alleviate traffic congestion. A number of research studies have attempted to develop models to predict incident durations, yet with limited success. ^ This dissertation research attempts to improve on this previous effort by applying data mining techniques to a comprehensive incident database maintained by the District 4 ITS Office of the Florida Department of Transportation (FDOT). Two categories of incident duration prediction models were developed: "offline" models designed for use in the performance evaluation of incident management programs, and "online" models for real-time prediction of incident duration to aid in the decision making of traffic diversion in the event of an ongoing incident. Multiple data mining analysis techniques were applied and evaluated in the research. The multiple linear regression analysis and decision tree based method were applied to develop the offline models, and the rule-based method and a tree algorithm called M5P were used to develop the online models. ^ The results show that the models in general can achieve high prediction accuracy within acceptable time intervals of the actual durations. The research also identifies some new contributing factors that have not been examined in past studies. As part of the research effort, software code was developed to implement the models in the existing software system of District 4 FDOT for actual applications. ^