Ferroelectric : CNTs structures fabrication for advanced functional nano devices

This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.

Does this case hold the answer to one of the worse types of pain in medicine--that of loin pain haematuria syndrome (LPHS)

A patient with loin pain haematuria syndrome suffering chronic throbbing pulsing pain overlaid with prolonged periods of incapacitating colic and overnight vomiting was presented 10 months following diagnosis. Ultrasound was normal. No renal or ureteral stones, or filling defects were seen on CT. At cytoscopy, bladder and urethra were normal, and bloody urine effluxed from the left ureteric orifice. The ureters were normal at diagnosis, and developed new abutting non‐penetrating calcifications by 8 months. Pain episodes of complete incapacitating intensity of 2–4 h duration were reduced to 10 min with 5 mg crushed tadalafil administered at onset. If tadalafil was delayed to after onset, the original course of agony resulted. Daily tadalafil reduced loin pain intensity, but not the exacerbations. Tadalafil efficacy may indicate that the pain exacerbations are due to spasm of ureter smooth muscle. 5 mg tadalafil taken at onset alleviated severe loin pain exacerbations in this case of loin pain haematuria syndrome.

A corpus-based translation study on english-persian verb phrase ellipsis

Dissertação de mest., Natural Language Processing & Human Language Technology, Faculdade de Ciências Humanas e Sociais, Univ. do Algarve, 2011

Electrical characterization of metal-oxide-polymer devices for non-volatile memory applications

The objective of this thesis is to study the properties of resistive switching effect based on bistable resistive memory which is fabricated in the form of Al2O3/polymer diodes and to contribute to the elucidation of resistive switching mechanisms. Resistive memories were characterized using a variety of electrical techniques, including current-voltage measurements, small-signal impedance, and electrical noise based techniques. All the measurements were carried out over a large temperature range. Fast voltage ramps were used to elucidate the dynamic response of the memory to rapid varying electric fields. The temperature dependence of the current provided insight into the role of trapped charges in resistive switching. The analysis of fast current fluctuations using electric noise techniques contributed to the elucidation of the kinetics involved in filament formation/rupture, the filament size and correspondent current capabilities. The results reported in this thesis provide insight into a number of issues namely: (i) The fundamental limitations on the speed of operation of a bi-layer resistive memory are the time and voltage dependences of the switch-on mechanism. (ii) The results explain the wide spread in switching times reported in the literature and the apparently anomalous behaviour of the high conductance state namely the disappearance of the negative differential resistance region at high voltage scan rates which is commonly attributed to a “dead time” phenomenon which had remained elusive since it was first reported in the ‘60s. (iii) Assuming that the current is filamentary, Comsol simulations were performed and used to explain the observed dynamic properties of the current-voltage characteristics. Furthermore, the simulations suggest that filaments can interact with each other. (iv) The current-voltage characteristics have been studied as a function of temperature. The findings indicate that creation and annihilation of filaments is controlled by filling and neutralizing traps localized at the oxide/polymer interface. (v) Resistive switching was also studied in small-molecule OLEDs. It was shown that the degradation that leads to a loss of light output during operation is caused by the presence of a resistive switching layer. A diagnostic tool that predicts premature failure of OLEDs was devised and proposed. Resistive switching is a property of oxides. These layers can grow in a number of devices including, organic light emitting diodes (OLEDs), spin-valve transistors and photovoltaic devices fabricated in different types of material. Under strong electric fields the oxides can undergo dielectric breakdown and become resistive switching layers. Resistive switching strongly modifies the charge injection causing a number of deleterious effects and eventually device failure. In this respect the findings in this thesis are relevant to understand reliability issues in devices across a very broad field.

Avaliação do impacto da formação profissional : aplicação da técnica cliente mistério

Relatório de estágio de mestrado, Ciências da Educação (Avaliação em Educação), Universidade de Lisboa, Instituto de Educação, 2011

Comportamentos autolesivos em adolescentes : características epidemiológicas e análise de fatores psicopatológicos, temperamento efetivo e estratégias de coping

Tese de doutoramento, Medicina (Psiquiatria e Saúde Mental), Universidade de Lisboa, Faculdade de Medicina, 2014

Senior Managers’ Perspectives of Leading and Managing Effective, Sustainable and Successful Partnerships

Formal and informal partnerships have become key features of education policy and practice in many countries and managing such collaborative arrangements is an important dimension of the role(s) of leaders of educational organizations. Recent research has shown both the tensions and conflict that can develop in partnerships as well as the opportunities and benefits of partnership working for organizations and individuals. This article focuses on the characteristics of partnerships that contribute to their effectiveness, sustainability and success, filling a gap in the literature on educational partnerships. The research data emanate from a qualitative study of partnership working in England. The study used a grounded approach and inductively linked characteristics of partnerships found in the partnership literature with empirical data from a case study of a subregional partnership of education and training organizations. This combined evidence is used to conceptualize partnership as a continuum of weak to strong forms of partnership and to develop a table of characteristics which underpin such partnerships. The findings reveal the extent to which trust, networks, norms and values support effective, sustained and successful partnerships. These characteristics are differentiated and may fluctuate during the lifecourse of a partnership but remain fundamental features of partnership working and significantly contribute to the strength and effectiveness of partnerships.

Compact dielectric-filled waveguide filters and diplexers

This paper presents electromagnetic simulations of dielectric-filled rectangular waveguide bandpass filter structures with microstrip to waveguide transitions as well as a diplexer based on such filters for modern wireless systems. The two bandpass filters have been designed and simulated at centre frequencies of 11.85 and 14.25 GHz, respectively. A significant size reduction is achieved through dielectric filling.

Does Cost-Effectiveness Analysis Have a Role in US Managed Care Drug Formularies? An Empirical Study of Utilization, Costs, Outcomes, and Elasticity of Demand of a Value-Based Formulary

Thesis (Ph.D.)--University of Washington, 2015

Choosing to be Jews: a Sociological Reflection on American Jews Since 1950, pt. 1

The second half of the twentieth century has been a time when American Jews have experienced a minimum of prejudice and almost all domains of life have been accessible to them, but it has also been a time of assimilation, of swelling rates of inter-marriage, and of large numbers ignoring their Jewishness completely. Jews have no trouble building synagogues, but they have all sorts of trouble filling them. The quality of Jewish education is perhaps higher than ever before, and the output of Jewish scholarship is overwhelming in its scope and quality, but most American Jews receive a minimum of religious education and can neither read nor comprehend the great corpus of Jewish literature in its Hebrew (or Aramaic) original. This is a time in America when there is no shame in being a Jew, and yet fewer American Jews seem to know what being a Jew means. This book is part of a stocktaking that has been occurring among Jews as the century in which their residence in America was firmly established comes to an end. Grounded in empirical detail, it provides a concise yet analytic evaluation of the meaning of the many studies and surveys of the last four and a half decades. All those who want to know what it means and has meant to be an American Jew will find this volume of interest.

Choosing to be Jews: a Sociological Reflection on American Jews Since 1950, pt. 2

The second half of the twentieth century has been a time when American Jews have experienced a minimum of prejudice and almost all domains of life have been accessible to them, but it has also been a time of assimilation, of swelling rates of inter-marriage, and of large numbers ignoring their Jewishness completely. Jews have no trouble building synagogues, but they have all sorts of trouble filling them. The quality of Jewish education is perhaps higher than ever before, and the output of Jewish scholarship is overwhelming in its scope and quality, but most American Jews receive a minimum of religious education and can neither read nor comprehend the great corpus of Jewish literature in its Hebrew (or Aramaic) original. This is a time in America when there is no shame in being a Jew, and yet fewer American Jews seem to know what being a Jew means. This book is part of a stocktaking that has been occurring among Jews as the century in which their residence in America was firmly established comes to an end. Grounded in empirical detail, it provides a concise yet analytic evaluation of the meaning of the many studies and surveys of the last four and a half decades. All those who want to know what it means and has meant to be an American Jew will find this volume of interest.

Choosing to be Jews: a Sociological Reflection on American Jews Since 1950, pt. 3

The second half of the twentieth century has been a time when American Jews have experienced a minimum of prejudice and almost all domains of life have been accessible to them, but it has also been a time of assimilation, of swelling rates of inter-marriage, and of large numbers ignoring their Jewishness completely. Jews have no trouble building synagogues, but they have all sorts of trouble filling them. The quality of Jewish education is perhaps higher than ever before, and the output of Jewish scholarship is overwhelming in its scope and quality, but most American Jews receive a minimum of religious education and can neither read nor comprehend the great corpus of Jewish literature in its Hebrew (or Aramaic) original. This is a time in America when there is no shame in being a Jew, and yet fewer American Jews seem to know what being a Jew means. This book is part of a stocktaking that has been occurring among Jews as the century in which their residence in America was firmly established comes to an end. Grounded in empirical detail, it provides a concise yet analytic evaluation of the meaning of the many studies and surveys of the last four and a half decades. All those who want to know what it means and has meant to be an American Jew will find this volume of interest.

Comunicação da marca Wines of Portugal: um estudo de caso

As perspectivas de um mercado cada vez mais global, impostas pela intensificação da concorrência, aumento da competitividade e surgimento de economias de escala, têm desafiado os países a construírem identidades nacionais cada vez mais fortes e diferenciadoras, procurando alcançar uma vantagem competitiva que permita, não só um desempenho positivo nas relações comerciais, mas, igualmente, a valorização dos produtos nos mercados internacionais. Procura-se com o presente trabalho analisar o modo como Portugal se tem vindo a posicionar no panorama internacional, no âmbito do sector vitivinícola. Este é um sector que tem vindo a dar provas do seu forte potencial estratégico e, com recurso à construção da marca Wines of Portugal, os vinhos portugueses usufruem, actualmente, de mecanismos para a expressão da sua identidade nos mercados externos, permitindo um reforço do seu posicionamento estratégico. As noções de “marca país” e “comunicação institucional” surgem como ponto de partida para a análise do plano de comunicação proposto pela ViniPortugal para a marca Wines of Portugal, procurando compreender quais os contributos das relações públicas na construção e expressão da identidade dos vinhos portugueses num contexto internacional.

Sistemas de informação ao público nos transportes públicos de passageiros: análise crítica

Dissertação para obtenção do grau de Mestre em Engenharia na Área de especialização em Vias de Comunicação e Transportes

Gestão de comportamentos sociais adequados à sala de aula no 1.º ciclo do ensino básico

Relatório de Estágio apresentado à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ensino do 1.º e 2.º Ciclo do Ensino Básico