Enhanced charge collection in polymer photovoltaic cells by using an ethanol-soluble conjugated polyfluorene as cathode buffer layer

We report enhanced polymer photovoltaic (PV) cells by utilizing ethanol-soluble conjugated poly (9, 9-bis (6'-diethoxylphosphorylhexyl) fluorene) (PF-EP) as a buffer layer between the active layer consisting of poly(3-hexylthiophene)/[6, 6]-phenyl C61-butyric acid methyl ester blend and the Al cathode. Compared to the control PV cell with Al cathode, the introduction of PF-EP effectively increases the shunt resistance and improves the photo-generated charge collection since the slightly thicker semi-conducting PF-EP layer may restrain the penetration of Al atoms into the active layer that may result in increased leakage current and quench photo-generated excitons. The power conversion efficiency is increased ca. 8% compared to the post-annealed cell with Al cathode.

Effect of Poly (3-hexylthiophene) Nanofibrils on Charge Separation and Transport in Polymer Bulk Heterojunction Photovoltaic Cells

Crystalline poly (3-hexylthiophene) (P3HT) nanofibrils are introduced into the P3HT: [6, 6]-phenyl C61-butyric acid methyl ester (PCBM) composite films via P3HT preaggregation in solution by adding a small amount of acetone, and the correlation of P3HT nanofibrils and the optoelectronic properties of P3HT:PCBM bulk heterojunction photovoltaic cells is investigated. It is found that the optical absorption and the hole transport or the resulted P3HT:PCBM composite films increase with the increase of the amount of P3HT nanofibrils due to the increased P3HT crystallinity and highly interconnected nanofibrillar P3HT networks. However, it is also found that high contents of crystalline P3HT nanofibrils may restrain PCBM molecules from demixing with the P3HT component that forms electron traps in the active layer. and hence reduce the charge collection efficiency. Small contents of P3HT nanofibrils not only improve the demixing between P3HT and PCBM components, but also enhance the hole transport via crystalline P3HT nanofibrillar networks, resulting in efficient charge collection.

Rational Design, Synthesis, and Optical Properties of Film-Forming, Near-Infrared Absorbing, and Fluorescent Chiromophores with Multidonors and Large Heterocyclic Acceptors

A new series of film-forming, low-bandgap chromophores (1a,b and 2a,b) were rationally designed with aid of a computational study., and then synthesized and characterized. To realize absorption and emission above the 1000 nm wavelength, the molecular design focuses on lowering the LUMO level by fusing common heterocyclic units into a large conjugated core that acts an electron acceptor and increasing the charge transfer by attaching the multiple electron-donating groups at the appropriate positions of the acceptor core. The chromophores have bandgap levels of 1.27-0.71 eV, and accordingly absorb at 746-1003 nm and emit at 1035-1290 nm in solution. By design, the relatively high molecular weight (up to 2400 g mol(-1)) and non-coplanar structure allow these near-infrared (NIR) chromophores to be readily spin-coated as uniform thin films and doped with other organic semiconductors for potential device applications. Doping with [6,6]-phenyl-C-61 butyric acid methyl ester leads to a red shift in the absorption on]), for la and 2a. An interesting NIR electrochromism was found for 2a, with absorption being turned on at 1034 nm when electrochemically switched (at 1000 mV) from its neutral state to a radical cation state. Furthermore, a large Stokes shift (256-318 nm) is also unique for this multidonor-acceptor type of chromophore.

Chemical Constituents of a Marine-Derived Endophytic Fungus Penicillium commune G2M

Cultivation of the endophytic fungus Penicillium commune, which was isolated from the semi-mangrove plant Hibiscus tiliaceus, afforded one new compound 1-O-(2,4-dihydroxy-6-methylbenzoyl)-glycerol (1) along with thirteen known products, including 1-O-acetylglycerol (2), N-acetyltryptophan (3), 3-indolylacetic acid methyl ester (4), 1-(2,4-dihydroxy-3,5-dimethylphenyl)ethanone (5), 2-(2,5-dihydroxyphenyl)acetic acid (6), (4R,5S)-5-hydroxyhexan-4-olide (7), thymidine (8), uracil (9), thymine (10), ergosterol (11), beta-sitosterol (12), beta-daucosterol (13), and ergosta-7,22-dien-3 beta,5 alpha,6 beta-triol (14). The structures of these compounds were established by detailed NMR spectroscopic analysis, as well as by comparison with literature data or with authentic samples.

Bromophenols from the red alga Rhodomela confervoides

Six new bromophenols, 3-bromo-4,5-bis(2,3-dibromo-4,5-dihydroxybenzyl)pyrocatechol (1), 2,2',3-tribromo-3',4,4',5-tetrahydroxy-6'-hydroxymethyldiphenylmethane (2), 2,2',3-tribromo-3',4,4',5-tetrahydroxy-6'-ethyloxymethyldiphenylmethane (3),(+/-)-2-methyl-3-(2,3-dibromo-4,5-dihydroxyphenyl)propylaldehyde (4), (+/-)-2-methyl-3-(2,3-dibromo-4,5-dihydroxyphenyl)propylaldehyde dimethyl acetal (5), and 3-bromo-4,5-dihydroxybenzoic acid methyl ester (6), together with eight known bromophenols, 3-bromo-4,5-dihydroxybenzaldehyde (7), 2,3-dibromo-4,5-dihydroxybenzyl alcohol (lanosol, 8), 2,3-dibromo-4,5-dihydroxybenzyl methyl ether (9), 2,3-dibromo-4,5-dihydroxybenzyl ethyl ether (10), 2,3-dibromo-4,5-dihydroxybenzylaldehyde (11), bis(2,3-dibromo-4,5-dihydroxybenzyl) ether (12), 3-bromo-4-(2,3-dibromo-4,5-dihydroxybenzyl)-5-methoxymethylpyrocatechol (13), and 2,2',3,3'-tetrabromo-4,4',5,5'-tetrahydroxydiphenyl methane (14), were isolated from the red alga Rhodomela confervoides. Their structures were elucidated by chemical and spectroscopic methods including IR, HRFABMS, and 1D and 2D NMR techniques.

Bromophenol derivatives from the red alga Rhodomela confervoides

Eight new bromophenol derivatives, 2,3-dibromo-4,5-dihydroxybenzyl methyl sulfoxide (1), 4-(2,3-dibromo-4,5-dihydroxyphenyl)-3-butene-2-one (2), 2-(3-bromo-5-hydroxy-4-methoxyphenyl)-3-(2,3-dibromo-4,5-dihydroxyphenyl)propionic acid (3), 2-(3-bromo-5-hydroxy-4-methoxyphenyl)-3-(2,3-dibromo-4,5-dihydroxyphenyl)propionic acid methyl ester (4), 2-phenyl-3-(2,3-dibromo-4,5-dihydroxyphenyl)propionic acid (5), 4'-methoxy-2",3',3"-tribromo-4",5',5"-trihydroxydiphenylacetic acid (6), and 3-bromo-5-hydroxy-4-methoxyphenylacetic acid (7) and its methyl ester (8), together with a known bromophenol, 3-bromo-5-hydroxy4-methoxybenzoic acid (9), were isolated from the red alga Rhodomela confervoides. Their structures were elucidated by spectroscopic methods including IR, EIMS, FABMS, ESIMS, HRFABMS, HRESIMS, 1D and 2D NMR, and single-crystal X-ray structure analysis. Compounds 1-4, 8, and 9 were found inactive against several human cancer cell lines and microorganisms.

A new brominated phenylpropylaldehyde and its dimethyl acetal from red alga Rhodomela confervoides

A new brominated phenylpropylaldehyde and its dimethyl acetal together with a new natural brominated phenol were isolated from Rhodomela confervoides. Their structrues were elucidated as 2-methyl-3-(2,3-dibromo-4,5-dihydroxyphenyl)propylaldehyde, 2-methyl-3-(2,3-dibromo-4,5-dihydroxyphenyl) propylaldehyde dimethyl acetal and 3-bromo-4,5-dihydroxybenzoic acid methyl ester by spectroscopic techniques including IR, HRFABMS, ID and 2DNMR experiments.

Bactérias e as suas redes sociais

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Ciências Farmacêuticas

A novel recovery process for lipids from microalgæ for biodiesel production using a hydrated phosphonium ionic liquid

The use of a hydrated phosphonium ionic liquid, [P(CH<inf>2</inf>OH)<inf>4</inf>]Cl, for the extraction of microalgæ lipids for biodiesel production, was evaluated using two microalgæ species, Chlorella vulgaris and Nannochloropsis oculata. The ionic liquid extraction was compared to the conventional Soxhlet, and Bligh & Dyer, methods, giving the highest extraction efficiency in the case of C. vulgaris, at 8.1%. The extraction from N. oculata achieved the highest lipid yield for Bligh & Dyer (17.3%), while the ionic liquid extracted 12.8%. Nevertheless, the ionic liquid extraction showed high affinity to neutral/saponifiable lipids, resulting in the highest fatty acid methyl esters (FAMEs)-biodiesel yield (4.5%) for C. vulgaris. For N. oculata, the FAMEs yield of the ionic liquid and Bligh & Dyer extraction methods were similar (>8%), and much higher than for Soxhlet (<5%). The ionic liquid extraction proved especially suitable for lipid extraction from wet biomass, giving even higher extraction yields than from dry biomass, 14.9% and 12.8%, respectively (N. oculata). Remarkably, the overall yield of FAMEs was almost unchanged, 8.1% and 8.0%, for dry and wet biomass. The ionic liquid extraction process was also studied at ambient temperature, varying the extraction time, giving 75% of lipid and 93% of FAMEs recovery after thirty minutes, as compared to the extraction at 100 °C for one day. The recyclability study demonstrated that the ionic liquid was unchanged after treatment, and was successfully reused. The ionic liquid used is best described as [P(CH<inf>2</inf>OH)<inf>4</inf>]Cl·2H<inf>2</inf>O, where the water is not free, but strongly bound to the ions.

Extraction and purification of triterpenic acids from eucalypt bark

A indústria da pasta e do papel é um sector importante da economia mundial, particularmente a que assenta em espécies de Eucalyptus. No entanto, essas indústrias geram quantidades significativas de correntes secundárias de subprodutos e resíduos de biomassa que podem ser exploradas em aplicações de valor acrescentado em vez de serem queimadas para produção de energia. Um exemplo nobre pode ser a produção de ácidos triterpénicos com estruturas dos tipos lupano, oleanano e ursano, dada a sua abundância em alguns destes resíduos, em particular na casca, adotando o conceito de biorrefinaria integrada numa fábrica de pasta. Estes compostos são conhecidos pelas suas inúmeras actividades biológicas, por exemplo, antioxidante, anti-inflamatória e antitumoral, e podem encontrar aplicações em produtos de elevado valor, tais como cosméticos, nutracêuticos ou farmacêuticos. Neste sentido, o estudo das potencialidades das cascas das espécies de eucalipto mais exploradas enquanto fontes de compostos triterpénicos é um tópico relevante. Por conseguinte, foram analisados e comparados em pormenor os teores e composições em ácidos triterpénicos (TTAs) das cascas externas de várias espécies de eucalipto (E. globulus, E. grandis, E. urograndis, E. maidenii e E. nitens). Os teores dos principais TTAs identificados nestas espécies variaram entre 4.5 g/kg no E. urograndis e 21.6 g/kg no E. nitens. Observou-se que as cascas externas de Eucalyptus de zonas temperadas e Mediterrânicas, nomeadamente E. nitens e E. globulus, são mais ricas em TTAs que as espécies de regiões tropicais e subtropicais. Além disso, a casca externa do E. globulus é claramente a mais rica em ácidos com estruturas do tipo ursano enquanto a do E. nitens é a mais rica em ácidos do tipo oleanano e lupano. Estes resultados levaram-nos a estudar a extração dos TTAs da casca de Eucalyptus, bem como a sua posterior concentração e purificação, a qual foi efetuada por extração sólido-líquido convencional combinada com a precipitação de solutos, e por extração com fluidos supercríticos (SFE). No que diz respeito à primeira abordagem referida, foi desenvolvido neste trabalho um método patenteado que permite obter extratos enriquecidos em TTAs das cascas de eucalipto baseado em tecnologias disponíveis no imediato. Em relação à segunda abordagem, e de forma a apostar em processos de baixo impacto ambiental exigidos pelas biorrefinarias do futuro, a SFE surge como uma opção natural. Assim, foi efetuada a SFE da casca caduca do E. globulus com dióxido de carbono puro e modificado para recuperar a fração de TTAs, e os resultados foram comparados com os obtidos por extração em Soxhlet com diclorometano. Foram realizados estudos preliminares sobre a influência da pressão (100-200 bar), a adição de co-solvente (0, 5 e 8% m/m de etanol), e operação em múltiplos passos a fim de avaliar a aplicabilidade da alternativa supercrítica para a sua produção eficiente e selectiva. Os resultados destacaram a influência da pressão e o importante papel resumo (cont.) desempenhado pelo co-solvente neste processo, cujo efeito foi mais relevante do que o aumento da pressão em várias dezenas de bar. Este trabalho foi depois otimizado, usando o planeamento factorial de experiências e a metodologia de superfícies de resposta, para analisar a influência da temperatura (40-60 ºC), pressão (100-200 bar), e teor de etanol (0.0-5.0% m/m) na recuperação dos TTAs e respectiva concentração nos extractos. Nestes intervalos, as melhores condições de operação encontradas foram 200 bar, 40 °C e 5% de etanol, para as quais os modelos de regressão estatisticamente validados previram um rendimento de extração de 1.2% com 50% de concentração em TTAs, correspondendo ao rendimento em TTAs de 5.1 g/kg de casca e uma recuperação de 79.2% comparativamente ao valor do Soxhlet. Os TTAs livres e acetilados apresentaram tendências de extracção bastante distintas devido às suas diferentes afinidades para o CO2 causadas pelas diferentes polaridades: os derivados acetilados aproximam-se de um patamar máximo a cerca de 200 bar e 5% de etanol, enquanto a extração dos TTAs livres apresenta uma tendência sempre crescente no intervalo de condições estudado. Foram também medidas curvas cumulativas de SFE da casca do E. globulus de forma a analisar o comportamento cinético do processo em termos de rendimento total, rendimento em TTAs, rendimento em TTAs livres, rendimento em TTAs acetilados, e concentração dos TTAs nos extractos. Foi analisada a influência da pressão, temperatura, teor de co-solvente e caudal do dióxido de carbono sobre as respostas anteriores. Os dados experimentais foram modelados com os modelos Logístico, de Dessorção, de Placa Plana Simples, e de Difusão. Na globalidade, os resultados confirmaram que a pressão e o teor de etanol têm um efeito significativo sobre as curvas de extração, os rendimentos finais e as concentrações dos extratos, e mostraram a presença de limitações externas à transferência de massa em alguns ensaios. Mais uma vez, as famílias individuais de TTAs livres e acetilados apresentaram diferentes tendências de extracção. A modelação permitiu-nos confirmar não só o importante papel desempenhado pela difusão intraparticular na SFE, mas também a contribuição da resistência no filme em alguns ensaios. Após a análise de todos os resultados, foi efetuado um ensaio em duas etapas em série, possibilitando o enriquecimento do teor em TTAs no extracto devido às diferentes condições adotadas em cada etapa. Por último, um éster metílico de um ácido triterpénico do tipo oleanano - morolato de metilo - foi identificado pela primeira vez enquanto componente da casca de Eucalyptus na casca externa do Eucalyptus grandis x globulus, onde ocorre em teores elevados. A sua extração com CO2 supercrítico foi também realizada, visando a conceção de uma alternativa de extração ambientalmente benigna para este composto. A 200 bar e 60 ºC, a remoção do morolato de metilo atingiu um patamar às 6 h para 5.1 kg h-1 de CO2 / kg de casca. Em geral, e de forma semelhante à SFE da casca do E. globulus, os TTAs acetilados foram mais significativamente extraídos quando comparados com os seus ácidos livres, o que está diretamente relacionado com a natureza menos polar destas moléculas. O trabalho apresentado nesta tese é uma contribuição para a valorização de uma corrente de biomassa com baixo valor na indústria de pasta em duas vertentes complementares. Por um lado, aumentou o conhecimento da composição lipofílica das cascas de Eucalyptus spp. com interesse comercial para a produção de pasta, destacando o seu potencial enquanto fontes de ácidos triterpénicos. Por outro lado, foram desenvolvidos dois processos alternativos e facilmente integráveis numa fábrica de pasta para a sua exploração a partir da casca: um baseado em tecnologias convencionais bem estabelecidas a nível industrial, prevendo a sua aplicação a curto prazo, e um outro baseado na SFE, seguindo as tendências das futuras biorrefinarias.

A mass spectrometric study of some pesticides /|nK. S. Subramanian. -- 260 St. Catharines, Ont. : [s. n.],

The fragmentation processes in the mass spectra of a series of organophosphorus, organochlorine, thio and dithiocarbamate as well as a number of miscellaneous pesticides have been studied i n detail by using the Bendix timeof- flight, MS-12 single-focussing and MS-30 double-focussing mass spectrometers. Interpretation of all the spectra have been presented; their mode s of dissociation elucidated, aided by metastable transitions wherever possible and the structures of the various f ragmentation species postulated wherever f easible. The fragmentation mechanisms are based on the concepts of inductive, resonance and steric ef~ects. Multiple bond cleavages accompanied by simultaneous bond formation and rearrangement reactions involving cycli c t r ansition states have clarified t he formation of various ions . Due emphasis has been placed on the effect of the functional groups or substituents in altering the mass spectral behaviour of the pesticides as they form the basis for the identifi cation of the otherwise identical pesticides. The organophosphorus pesticides which have been studied include i) the phosphates (eg: DDVP and Phosdrin ); ii) phosphorothionates (eg: Parathion, 0-2, 4 dichloro phenyl 0, O-diethyl thionophosphate); iii) phosphorothioites (eg: Tributyl phosphorotrithioite); i V) phosphorothioates (eg: Ethion) and v) phosphorodithioates (eg: Carbophenolthion). Cleavages and rearrangements of the ester moiety dominate the spectrum of phosdrin while that of DDVP is + dominated by t he fragmentation modes of the (OH30)2P=0 + moiety. Fragmentation §f the (CH30)2P=S characterises the spectrum of (OH30)2"P -Cl while cleavages of the + (C2H50 )2P=S species mark the spectra of parathion and 0-2, 4- di chlorophenyl O, O-diethyl thiophosphate. The 0(, cl eavages of the thioether f unction rather than + cleavages of the (C2H50)2P=S signify the spectrum of carbophenolthion. Tributyl phosphorotrithioite behaves more like an aliphatic hydrocarbon than like the corresponding phosphites. The isopropyl and butyl esters of 2, 4 dichlorophenoxy acetic acid show cleavage and rearrangement ions typical of an ester. In spite of its structural similari ty to pp' - DDT and pp' - DDD, Kalthane has a completely different mass spectral behaviour due to the influence of its hydroxyl function. The thiocarbamate pesticides studied include Eptam and Perbulate. Both are structurally similar but having different alkyl substituents on nitrogen and sulphur. This structurQlsimilarity leads to similar types of (N-C), (O-S) and (S-alkyl cleavages). However, perbulate differs from Eptam in showing a rearrangement ion at mle 161 and in forming an isocyanate ion as the base peak. In Eptam the base peak i s the alkyl ion. The dithiocarbamate, Vegadex, resembles the thiocarbamates in undergoing simple cleavages but it differs from them in having a weak parent ion; in the formation of its base peak and in undergoing a series of rearrangement reactions. The miscellaneous pesticides studied include 1-Naphthalene acetic aCid- methyl ester, Fiperonyl butoxide and Allethrin. The ester i s stable to electron impact and shows only fewer ions. Piper onyl butoxide, a polyether, shows characteristics of an et her, alcohol and aldehyde . Allethrin is regarded as an ester of the type R-C-O-R1 with n R being a substituted cyclopr opane moiety and o Rt, a substituted cyclopentenone mOiety. Accordingly it shows cleavage ions typical of an aliphatic ester and undergoes bond ruptures of the cyclic moieties to give unusual ions. Its base peak is an odd electron ion, quite contrary to expectations.

Antidiabetic activity of Vaccinium vitis-idaea, a medicinal plant from the traditional pharmacopeia of the James Bay Cree

L’incidence du diabète chez les premières nations du Canada est plus de trois fois celle du reste du pays, dû, en partie, aux traitements culturellement inappropriés. Notre projet vise à traiter le diabète chez ces populations à partir de leur pharmacopée de médicine traditionnelle afin d’améliorer l’acceptation des traitements. En utilisant une approche ethnobotanique, notre équipe a identifié 17 plantes médicinales utilisées pour traiter des symptômes du diabète par les Cris d'Eeyou Istchee (Baie James, Québec). Parmi eux, l'extrait éthanolique de baies de Vaccinium vitis-idaea a montré un effet stimulateur sur le transport du glucose dans les cellules musculaires squelettiques et les adipocytes en culture. Le but de cette thèse était d’élucider les mécanismes par lesquels cet extrait exerce ses effets anti-hyperglycémiants, d’identifier ses principes actifs et de confirmer in vivo, son efficacité. Les résultats démontrent que V.vitis a augmenté le transport du glucose dans les cellules musculaires en cultures, C2C12 et L6 et a stimulé la translocation des transporteurs GLUT4 dans les cellules L6. L'extrait a également inhibé la respiration dans les mitochondries isolées du foie du rat. Cet effet est semblable à celui de la metformine et en lien avec la production du stress métabolique et l'activation de l'AMPK. De plus, la voie de signalisation de l’insuline ne semble pas être impliquée dans le mécanisme d’action de V. vitis. Le fractionnement guidé par la stimulation du transport du glucose a mené à l'isolation des principes actifs; la quercétine, la quercétine-3-O-galactoside, et la quercétine-3-O-glucoside. Comparable à l'extrait brut, ses composés ont stimulé la voie AMPK. Cependant, la quércetine était la seule à inhiber la respiration mitochondriale. Pour valider l'effet de V.vitis in vivo, l'extrait (1% dans l'eau de boisson) a été administré aux souris KKAy pendant 10 jours. La glycémie et le poids corporel ont été significativement réduits par V.vitis. Ces effets ont été associés à une diminution de la prise alimentaire, ce qui suggère que V.vitis diminue l'appétit. L'étude pair-fed a confirmé que les effets de V.vitis sont, majoritairement, dû à la réduction de l’appétit. De plus, V.vitis a augmenté la teneur en GLUT4 dans le muscle squelettique, a stimulé la iv phosphorylation de l'ACC et a augmenté les niveaux de PPAR-α dans le foie des souris KKAy. Ces effets se voient être additifs à l’effet anorexigène de V. vitis. Au cours du fractionnement bioguidé de l’extrait, l’ester méthylique de l'acide caféique (CAME), un produit formé lors de la procédure du fractionnement, a démontré un effet stimulateur puissant sur le transport du glucose dans les celules C2C12 et donc un potentiel anti-diabétique. Pour identifier d'autres acides caféique active (AC) et pour élucider leurs relations structure-activité et structure-toxicité, vingt dérivés AC ont été testés. Outre CAME, quatre composés ont stimulé le transport du glucose et ont activé l'AMPK suite au stress métabolique résultant d'un découplage de la phosphorylation oxydative mitochondriale. L’activité nécessite une fonction d’AC intacte dépourvu de groupements fortement ionisés et ceci était bien corrélée avec la lipophilicite et la toxicité. Les résultats de cette thèse soutiennent le potentiel thérapeutique de V. vitis, ses composés actifs ainsi que de la famille de l’AC et pour la prévention et le traitement du diabète.

Développement des marqueurs moléculaires spécifiques pour l'identification et la quantification de deux espèces de champignons mycorhiziens arbusculaires en utilisant la PCR en temps réel

Les champignons mycorhizien à arbuscules (CMA) sont des organismes pouvant établir des symbioses avec 80% des plantes terrestres. Les avantages d'une telle symbiose sont de plus en plus caractérisés et exploités en agriculture. Par contre, jusqu'à maintenant, il n'existe aucun outil permettant à la fois l'identification et la quantification de ces champignons dans le sol de façon fiable et rapide. Un tel outil permettrait, entre autres, de mieux comprendre les dynamiques des populations des endomycorhizes dans le sol. Pour les producteurs d'inoculum mycorhiziens, cela permettrait également d'établir un suivi de leurs produits en champs et d'avoir un contrôle de qualité de plus sur leurs inoculants. C'est ce que nous avons tenté de développer au sein du laboratoire du Dr. Hijri. Depuis environ une trentaine d'années, des outils d'identification et/ou de quantification ont été développés en utilisant les profiles d'acides gras, les isozymes, les anticorps et finalement l'ADN nucléaire. À ce jour, ces méthodes d’identification et de quantification sont soit coûteuses, soit imprécises. Qui plus est, aucune méthode ne permet à la fois la quantification et l’identification de souches particulières de CMA. L’ADN mitochondrial ne présente pas le même polymorphisme de séquence que celui qui rend l’ADN nucléaire impropre à la quantification. C'est pourquoi nous avons analysé les séquences d’ADN mitochondrial et sélectionné les régions caractéristiques de deux espèces de champignons mycorhiziens arbusculaires (CMA). C’est à partir de ces régions que nous avons développé des marqueurs moléculaires sous forme de sondes et d’amorces TaqMan permettant de quantifier le nombre de mitochondries de chacune de ces espèces dans un échantillon d’ADN. Nous avons ensuite tenté de déterminer une unité de quantification des CMA, soit un nombre de mitochondries par spore. C’est alors que nous avons réalisé que la méthode de préparation des échantillons de spores ainsi que la méthode d’extraction d’ADN avaient des effets significatifs sur l’unité de quantification de base. Nous avons donc optimisé ces protocoles, avant d’en e tester l’application sur des échantillons de sol et de racines ayant été inoculés avec chacune des deux espèces cibles. À ce stade, cet outil est toujours semi-quantificatif, mais il permet 9 l’identification précise de deux espèces de CMA compétentes dans des milieux saturés en phosphore inorganique. Ces résultats , en plus d’être prometteurs, ont permis d’augmenter les connaissances méthodologiques reliées à la quantification des CMA dans le sol, et suggèrent qu’à cause de leurs morphologies différentes, l’élaboration d’un protocole de quantification standardisé pour toutes les espèces de CMA demeure un objectif complexe, qui demande de nouvelles études in vivo.

Synthesis and characterization of a new mebendazole salt: Mebendazole hydrochloride

Mebendazole hydrochloride [(5-benzoyl-1H-benzimidazole-2-yl)-carbamic acid methyl ester hydrochloride, MBZ.HCl], a new stable salt of mebendazole (MBZ), has been synthesized and characterized. It can easily be obtained from recrystallization of forms A, B, or C of MBZ in diverse solvents with the addition of hydrochloric acid solution. Crystallographic data reveals that the particular conformation adopted by the carbamic group contributes to the stability of the network. The crystal packing is stabilized by the presence of three N-H...Cl intermolecular interactions that form chains along the b axis. The XRD analyses of the three crystalline habits found in the crystallization process (square-based pyramids, pseudohexagonal plates, and prismatic) show equivalent diffraction patterns. The vibrational behavior is consistent with crystal structure. The most important functional groups show shifts to lower or higher frequencies in relation to the MBZ polymorphs. The thermal study on MBZ center dot HCI indicates that the compound is stable up to 160 degrees C approximately. Decomposition occurs in four steps. In the first step the HCl group is eliminated, and after that the remaining MBZ polymorph A decomposes in three steps, as happens with polymorphs B and C. (C) 2007 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:542-552, 2008.

Light-Induced Oxidation of Unsaturated Lipids as Sensitized by Flavins

Triplet-excited riboflavin ((3)RF*) was found by laser flash photolysis to be quenched by polyunsaturated fatty acid methyl esters in tert-butanol/water (7:3, v/v) in a second-order reaction with k similar to 3.0 x 10(5) L mol(-1) s(-1) at 25 degrees C for methyl linoleate and 3.1 x 10(6) L mol(-1) s(-1), with Delta H double dagger = 22.6 kJ mol(-1) and Delta S double dagger = -62.3 J K(-1) mol(-1), for methyl linolenate in acetonitrile/water (8:2, v/v). For methyl oleate, k was <10(4) L mol(-1) s(-1). For comparison, beta-casein was found to have a rate constant k similar to 4.9 x 10(8) L mol(-1) s(-1). Singlet-excited flavin was not quenched by the esters as evidenced by insensitivity of steady-state fluorescence to their presence. Density functional theory (DFT) calculations showed that electron transfer from unsaturated fatty acid esters to triplet-excited flavins is endergonic, while a formal hydrogen atom transfer is exergonic (Delta G(HAT)degrees = -114.3, -151.2, and -151.2 kJ mol(-1) for oleate, linoleate, and linolenate, respectively, in acetonitrile). The reaction is driven by acidity of the lipid cation radical for which a pK(a) similar to -0.12 was estimated by DFT calculations. Absence of electrochemical activity in acetonitrile during cyclic voltammetry up to 2.0 V versus NHE confirmed that Delta G(ET)degrees > 0 for electron transfer. Interaction of methyl esters with (3)RF* is considered as initiation of the radical chain, which is subsequently propagated by combination reactions with residual oxygen. In this respect, carbon-centered and alkoxyl radicals were detected using the spin trapping technique in combination with electron paramagnetic resonance spectroscopy. Moreover, quenching of 3RF* yields, directly or indirectly, radical species which are capable of initiating oxidation in unsaturated fatty acid methyl esters. Still, deactivation of triplet-excited flavins by lipid derivatives was slower than by proteins (factor up to 10(4)), which react preferentially by electron transfer. Depending on the reaction environment in biological systems (including food), protein radicals are expected to interfere in the mechanism of light-induced lipid oxidation.