Dynamics of cell–matrix mechanical interactions in three dimensions

The forces cells apply to their surroundings control biological processes such as growth, adhesion, development, and migration. In the past 20 years, a number of experimental techniques have been developed to measure such cell tractions. These approaches have primarily measured the tractions applied by cells to synthetic two-dimensional substrates, which do not mimic in vivo conditions for most cell types. Many cell types live in a fibrous three-dimensional (3D) matrix environment. While studying cell behavior in such 3D matrices will provide valuable insights for the mechanobiology and tissue engineering communities, no experimental approaches have yet measured cell tractions in a fibrous 3D matrix.

This thesis describes the development and application of an experimental technique for quantifying cellular forces in a natural 3D matrix. Cells and their surrounding matrix are imaged in three dimensions with high speed confocal microscopy. The cell-induced matrix displacements are computed from the 3D image volumes using digital volume correlation. The strain tensor in the 3D matrix is computed by differentiating the displacements, and the stress tensor is computed by applying a constitutive law. Finally, tractions applied by the cells to the matrix are computed directly from the stress tensor.

The 3D traction measurement approach is used to investigate how cells mechanically interact with the matrix in biologically relevant processes such as division and invasion. During division, a single mother cell undergoes a drastic morphological change to split into two daughter cells. In a 3D matrix, dividing cells apply tensile force to the matrix through thin, persistent extensions that in turn direct the orientation and location of the daughter cells. Cell invasion into a 3D matrix is the first step required for cell migration in three dimensions. During invasion, cells initially apply minimal tractions to the matrix as they extend thin protrusions into the matrix fiber network. The invading cells anchor themselves to the matrix using these protrusions, and subsequently pull on the matrix to propel themselves forward.

Lastly, this thesis describes a constitutive model for the 3D fibrous matrix that uses a finite element (FE) approach. The FE model simulates the fibrous microstructure of the matrix and matches the cell-induced matrix displacements observed experimentally using digital volume correlation. The model is applied to predict how cells mechanically sense one another in a 3D matrix. It is found that cell-induced matrix displacements localize along linear paths. These linear paths propagate over a long range through the fibrous matrix, and provide a mechanism for cell-cell signaling and mechanosensing. The FE model developed here has the potential to reveal the effects of matrix density, inhomogeneity, and anisotropy in signaling cell behavior through mechanotransduction.

Palladium-catalyzed asymmetric allylic alkylation: insights, application toward cyclopentanoid and cycloheptanoid molecules, and the total synthesis of several daucane sesquiterpenes

The asymmetric construction of quaternary stereocenters is a topic of great interest in the organic chemistry community given their prevalence in natural products and biologically active molecules. Over the last decade, the Stoltz group has pursued the synthesis of this challenging motif via a palladium-catalyzed allylic alkylation using chiral phosphinooxazoline (PHOX) ligands. Recent results indicate that the alkylation of lactams and imides consistently proceeds with enantioselectivities substantially higher than any other substrate class previously examined in this system. This observation prompted exploration of the characteristics that distinguish these molecules as superior alkylation substrates, resulting in newfound insights and marked improvements in the allylic alkylation of carbocyclic compounds.

General routes to cyclopentanoid and cycloheptanoid core structures have been developed that incorporate the palladium-catalyzed allylic alkylation as a key transformation. The unique reactivity of α-quaternary vinylogous esters upon addition of hydride or organometallic reagents enables divergent access to γ-quaternary acylcyclopentenes or cycloheptenones through respective ring contraction or carbonyl transposition pathways. Derivatization of the resulting molecules provides a series of mono-, bi-, and tricyclic systems that can serve as valuable intermediates for the total synthesis of complex natural products.

The allylic alkylation and ring contraction methodology has been employed to prepare variably functionalized bicyclo[5.3.0]decane molecules and enables the enantioselective total syntheses of daucene, daucenal, epoxydaucenal B, and 14-p-anisoyloxydauc-4,8-diene. This route overcomes the challenge of accessing β-substituted acylcyclopentenes by employing a siloxyenone to effect the Grignard addition and ring opening in a single step. Subsequent ring-closing metathesis and aldol reactions form the hydroazulene core of these targets. Derivatization of a key enone intermediate allows access to either the daucane sesquiterpene or sphenobolane diterpene carbon skeletons, as well as other oxygenated scaffolds.

Tunable heparan sulfate glycomimetics for modulating chemokine activity

Heparan sulfate (HS) glycosaminoglycans participate in critical biological processes by modulating the activity of a diverse set of protein binding partners. Such proteins include all known members of the chemokine superfamily, which are thought to guide the migration of distinct subsets of immune cells through their interactions with HS proteoglycans on endothelial cell surfaces. Animal-derived heparin polysaccharides have been shown to reduce inflammation levels through the inhibition of HS-chemokine interactions; however, the clinical usage of heparin as an anti-inflammatory drug is hampered by its anticoagulant activity and potential risk for side effects, such as heparin-induced thrombocytopenia (HIT).

Here, we describe an expedient, divergent synthesis to prepare defined glycomimetics of HS that recapitulate the macromolecular structure and biological activity of natural HS glycosaminoglycans. Our synthetic approach uses a core disaccharide precursor to generate a library of four differentially sulfated polymers. We show that a trisulfated glycopolymer antagonizes the chemotactic activities of pro-inflammatory chemokine RANTES with similar potency as heparin polysaccharide, without potentiating the anticoagulant activities of antithrombin III. The same glycopolymer also inhibited the homeostatic chemokine SDF-1 with significantly more efficacy than heparin. Our work offers a general strategy for modulating chemokines and dissecting the pleiotropic functions of HS/heparin through the presentation of defined sulfation motifs within multivalent polymeric scaffolds.

Engineered discoidin domain from factor VIII binds αvβ3 integrin with antibody-like affinity

Alternative scaffolds are non-antibody proteins that can be engineered to bind new targets. They have found useful niches in the therapeutic space due to their smaller size and the ease with which they can be engineered to be bispecific. We sought a new scaffold that could be used for therapeutic ends and chose the C2 discoidin domain of factor VIII, which is well studied and of human origin. Using yeast surface display, we engineered the C2 domain to bind to αvβ3 integrin with a 16 nM affinity while retaining its thermal stability and monomeric nature. We obtained a crystal structure of the engineered domain at 2.1 Å resolution. We have christened this discoidin domain alternative scaffold the “discobody.”

Fundamental Studies of Carbon Oxygen Bond Activation in Nickel Diphosphine Ether Complexes. And, Metallomacrocycles as Ligands: Synthesis and Characterization of Aluminum-Bridged Bisglyoximato Complexes of Iron and Cobalt

In order to develop better catalysts for the cleavage of aryl-X bonds fundamental studies of the mechanism and individual steps of the mechanism have been investigated in detail. As the described studies are difficult at best in catalytic systems, model systems are frequently used. To study aryl-oxygen bond activation, a terphenyl diphosphine scaffold containing an ether moiety in the central arene was designed. The first three chapters of this dissertation focus on the studies of the nickel complexes supported by this diphosphine backbone and the research efforts in regards to aryl-oxygen bond activation.

Chapter 2 outlines the synthesis of a variety of diphosphine terphenyl ether ligand scaffolds. The metallation of these scaffolds with nickel is described. The reactivity of these nickel(0) systems is also outlined. The systems were found to typically undergo a reductive cleavage of the aryl oxygen bond. The mechanism was found to be a subsequent oxidative addition, β-H elimination, reductive elimination and (or) decarbonylation.

Chapter 3 presents kinetic studies of the aryl oxygen bond in the systems outlined in Chapter 2. Using a series of nickel(0) diphosphine terphenyl ether complexes the kinetics of aryl oxygen bond activation was studied. The activation parameters of oxidative addition for the model systems were determined. Little variation was observed in the rate and activation parameters of oxidative addition with varying electronics in the model system. The cause of the lack of variation is due to the ground state and oxidative addition transition state being affected similarly. Attempts were made to extend this study to catalytic systems.

Chapter 4 investigates aryl oxygen bond activation in the presence of additives. It was found that the addition of certain metal alkyls to the nickel(0) model system lead to an increase in the rate of aryl oxygen bond activation. The addition of excess Grignard reagent led to an order of magnitude increase in the rate of aryl oxygen bond activation. Similarly the addition of AlMe3 led to a three order of magnitude rate increase. Addition of AlMe₃ at -80 °C led to the formation of an intermediate which was identified by NOESY correlations as a system in which the AlMe3 is coordinated to the ether moiety of the backbone. The rates and activation parameters of aryl oxygen bond activation in the presence of AlMe3 were investigated.

The last two chapters involve the study of metalla-macrocycles as ligands. Chapter 5 details the synthesis of a variety of glyoxime backbones and diphenol precursors and their metallation with aluminum. The coordination chemistry of iron on the aluminum scaffolds was investigated. Varying the electronics of the aluminum macrocycle was found to affect the observed electrochemistry of the iron center.

Chapter 6 extends the studies of chapter 5 to cobalt complexes. The synthesis of cobalt dialuminum glyoxime metal complexes is described. The electrochemistry of the cobalt complexes was investigated. The electrochemistry was compared to the observed electrochemistry of a zinc analog to identify the redox activity of the ligand. In the presence of acid the cobalt complexes were found to electrochemically reduce protons to dihydrogen. The electronics of the ancillary aluminum ligands were found to affect the potential of proton reduction in the cobalt complexes. These potentials were compared to other diglyoximate complexes.

The tensile fracture of mild steel

The fibrous and cleavage tensile fracture of an annealed mild steel was investigated. Round tensile specimens of two geometries, one straight and one with a circumferential notch, were pulled at temperatures between room temperature and liquid nitrogen temperature. Tensile fractures occurred at average strains from 0.02 to 0.87. The mechanism of fibrous fracture at room temperature was investigated metallographically. The stress-strain values at which fibrous and cleavage fractures are initiated were determined.

Many fine microcracks, which are associated with pearlite colonies and inclusion stringers, develop prior to fibrous fracture. The macrofracture, which leads to final separation of the tensile specimen, is initiated by the propagation of a microcrack beyond the microstructural feature with which it is associated. Thus, the fibrous fracture of mild steel does not develop by the gradual growth and coalescence of voids that are large enough to be visible in the optical microscope. When the microcracks begin to open and propagate, final fracture quickly follows. Axial cracks are a prominent feature of the macrofracture that forms in the interior of the specimen immediately before final fracture.

The Bridgman distribution of stresses is not valid in a notched tensile specimen. Fibrous and cleavage fractures occur at approximately the same value of maximum tensile stress. When the maximum tensile stress that is necessary for cleavage fracture is plotted against the corresponding maximum tensile strain, the result is an unique locus.

Estudo quantitativo da matriz extracelular e células do músculo liso de bexigas urinária após traumatismo raquimedular

Lesões na inervação do trato urinário inferior ocasionado por traumatismo raquimedular afetam geralmente o músculo detrusor e o esfíncteres uretrais. Estas alterações acarretam problemas basicamente de incontinência urinária e aumento da pressão intravesical, decorrente deste traumatismo, trazendo consequências para o funcionamento do sistema urinário superior. Quantificar os elementos fibrosos da matriz extracelular e fibras musculares das bexigas neurogênicas hiper-reflexas comparando-as com bexigas normais. Foram utilizadas 6 amostras de bexigas neurogênicas de indivíduos que foram submetidos a cirurgia de reparação por cistoenteroplastia realizados pelo serviço de urologia do Hospital Municipal Souza Aguiar, estas amostras foram fixadas imediatamente em solução tamponada de formalina a 10%. O controle com amostras iguais as do estudo extraída de cadáveres cuja causa morte não relacionava-se ao sistema urogenital macroscópicamente. O material foi submetido as seguintes técnicas histoquímicas: H&E, van Gieson e Resorcina Fucsina resorcina de Weigert com prévia oxidação pela oxona. Imunohistoquímica: anti-elastina. A observação dos cortes corados pelo van Gieson demonstrou uma diminuição significativa do músculo liso de 13% e aumento do colágeno em 72% e as fibras do sistema elástico um aumento de 101%. Conclusão. Nas bexigas neurogênicas hiper-reflexas o músculo detrusor e os elementos fibrosos da matriz foram profundamente modificados. As fibras do sistema elástico foram as mais afetadas.

Rate and Microstructure Effects on the Dynamics of Carbon Nanotube Foams

Soft hierarchical materials often present unique functional properties that are sensitive to the geometry and organization of their micro- and nano-structural features across different lengthscales. Carbon Nanotube (CNT) foams are hierarchical materials with fibrous morphology that are known for their remarkable physical, chemical and electrical properties. Their complex microstructure has led them to exhibit intriguing mechanical responses at different length-scales and in different loading regimes. Even though these materials have been studied for mechanical behavior over the past few years, their response at high-rate finite deformations and the influence of their microstructure on bulk mechanical behavior and energy dissipative characteristics remain elusive.

In this dissertation, we study the response of aligned CNT foams at the high strain-rate regime of 10² - 10⁴ s^-1. We investigate their bulk dynamic response and the fundamental deformation mechanisms at different lengthscales, and correlate them to the microstructural characteristics of the foams. We develop an experimental platform, with which to study the mechanics of CNT foams in high-rate deformations, that includes direct measurements of the strain and transmitted forces, and allows for a full field visualization of the sample’s deformation through high-speed microscopy.

We synthesize various CNT foams (e.g., vertically aligned CNT (VACNT) foams, helical CNT foams, micro-architectured VACNT foams and VACNT foams with microscale heterogeneities) and show that the bulk functional properties of these materials are highly tunable either by tailoring their microstructure during synthesis or by designing micro-architectures that exploit the principles of structural mechanics. We also develop numerical models to describe the bulk dynamic response using multiscale mass-spring models and identify the mechanical properties at length scales that are smaller than the sample height.

The ability to control the geometry of microstructural features, and their local interactions, allows the creation of novel hierarchical materials with desired functional properties. The fundamental understanding provided by this work on the key structure-function relations that govern the bulk response of CNT foams can be extended to other fibrous, soft and hierarchical materials. The findings can be used to design materials with tailored properties for different engineering applications, like vibration damping, impact mitigation and packaging.

O uso de células-tronco na regeneração dos tecidos dentários e periodonto

Os estudos abordando a regeneração dos tecidos dentários ganharam uma nova perspectiva com a utilização das células-tronco. E novas perspectivas têm surgido com a bioengenharia tecidual e as terapias periodontais e pulpares regeneradoras. O objetivo deste trabalho foi desenvolver o modelo experimental de autotransplante em ratos visando compará-lo à técnica de reimplante e estudar a capacidade terapêutica das células da medula óssea em diferentes biomateriais utilizados como matriz para a terapia de células-tronco no reparo dos tecidos dentais. Foram utilizados 23 ratos Wistar divididos em grupos de 1, 3, 15 e 60 dias para as técnicas de reimplante e autotransplante. Os grupos com injeção de células-tronco (CT) foram: (1) grupo de 3 dias, combinado à técnica de reimplante; (2) grupo de 15 dias com ambas as técnicas. Blocos contendo os três dentes molares superiores de cada lado dos ratos foram removidos, feitas radiografias periapicais e as peças foram processadas para inclusão em parafina. Foram avaliadas a espessura do ligamento periodontal (LPD) comparada entre os diferentes grupos e a morfologia celular e matriz extracelular relacionadas à superfície radicular, ao osso alveolar e à porção média do LPD, além das células da polpa dental de cada grupo. As células isoladas a partir da medula-óssea foram incubadas por 24h, 48h, e 72h em placas de cultura contendo membranas de colágeno bovino tipo I - CollaTape (Integra LifeSciences Corporation, Plainsboro, NJ, USA), enxerto ósseo - Extra Graft XG-13 (Silvestre Labs Quimica e Farmaceutica LTDA, RJ, Brazil) ou um dente molar de rato. Os espécimes foram observados em um microscópio invertido para contagem de células e processadas para observação no microscópio eletrônico de varredura (MEV). Os grupos de 1 e 3 dias apresentaram medidas de LPD significativamente maiores para a técnica de autotransplante quando comparadas ao reimplante. O grupo de 3 dias com CT não apresentou alterações pulpares significativas, diferente do controle (sem CT) O grupo de 15 dias com CT apresentou as mesmas características histológicas do grupo sem injeção de CT. A observação ao MEV dos biomateriais revelou que as células apresentaram pouca adesão e proliferação no enxerto ósseo e no cemento dentário quando comparados à membrana colágena. A técnica de reimplante associada à injeção de células-tronco sugere alguma influência da terapia com as células-tronco sobre a polpa. As distâncias aumentadas no LPD com a técnica de autotransplante podem não influenciar tanto o sucesso da técnica. As células mesenquimais da medula óssea possuem grande potencial para colonizarem a membrana colágena CollaTape que mostrou vantagens sobre o enxerto ósseo Extra Graft XG-13 como biomaterial para a aderência e a proliferação de células mononucleares da medula óssea, permitindo a diferenciação destas células.

Design, Synthesis, and Study of Novel Platforms for Iron-N2 Chemistry and Photoinduced, Copper-mediated C-N Bond Formation

Several new ligand platforms designed to support iron dinitrogen chemistry have been developed. First, we report Fe complexes of a tris(phosphino)alkyl (CP^iPr₃) ligand featuring an axial carbon donor intended to conceptually model the interstitial carbide atom of the nitrogenase iron-molybdenum cofactor (FeMoco). It is established that in this scaffold, the iron center binds dinitrogen trans to the C_alkyl anchor in three structurally characterized oxidation states. Fe-C_alkyl lengthening is observed upon reduction, reflective of significant ionic character in the Fe-C_alkyl interaction. The anionic (CP^iPr₃)FeN₂^- species can be functionalized by a silyl electrophile to generate (CP^iPr₃)Fe-N₂SiR₃. This species also functions as a modest catalyst for the reduction of N₂ to NH₃. Next, we introduce a new binucleating ligand scaffold that supports an Fe(μ-SAr)Fe diiron subunit that coordinates dinitrogen (N₂-Fe(μ-SAr)Fe-N₂) across at least three oxidation states (Fe^IIFe^II, Fe^IIFe^I, and Fe^IFe^I). Despite the sulfur-rich coordination environment of iron in FeMoco, synthetic examples of transition metal model complexes that bind N₂ and also feature sulfur donor ligands remain scarce; these complexes thus represent an unusual series of low-valent diiron complexes featuring thiolate and dinitrogen ligands. The (N₂-Fe(μ-SAr)Fe-N₂) system undergoes reduction of the bound N₂ to produce NH₃ (~50% yield) and can efficiently catalyze the disproportionation of N₂H₄ to NH₃ and N₂. The present scaffold also supports dinitrogen binding concomitant with hydride as a co-ligand. Next, inspired by the importance of secondary-sphere interactions in many metalloenzymes, we present complexes of iron in two new ligand scaffolds ([SiP^NMe₃] and [SiP^iPr₂P^NMe]) that incorporate hydrogen-bond acceptors (tertiary amines) which engage in interactions with nitrogenous substrates bound to the iron center (NH₃ and N₂H₄). Cation binding is also facilitated in anionic Fe(0)-N₂ complexes. While Fe-N₂ complexes of a related ligand ([SiP^iPr₃]) lacking hydrogen-bond acceptors produce a substantial amount of ammonia when treated with acid and reductant, the presence of the pendant amines instead facilitates the formation of metal hydride species.

Additionally, we present the development and mechanistic study of copper-mediated and copper-catalyzed photoinduced C-N bond forming reactions. Irradiation of a copper-amido complex, ((m-tol)₃P)₂Cu(carbazolide), in the presence of aryl halides furnishes N-phenylcarbazole under mild conditions. The mechanism likely proceeds via single-electron transfer from an excited state of the copper complex to the aryl halide, generating an aryl radical. An array of experimental data are consistent with a radical intermediate, including a cyclization/stereochemical investigation and a reactivity study, providing the first substantial experimental support for the viability of a radical pathway for Ullmann C-N bond formation. The copper complex can also be used as a precatalyst for Ullmann C-N couplings. We also disclose further study of catalytic C_alkyl-N couplings using a CuI precatalyst, and discuss the likely role of [Cu(carbazolide)₂]^- and [Cu(carbazolide)₃]^- species as intermediates in these reactions.

Finally, we report a series of four-coordinate, pseudotetrahedral P₃Fe^II-X complexes supported by tris(phosphine)borate ([PhBP₃Fe^R]^-) and phosphiniminato X-type ligands (-N=PR'₃) that in combination tune the spin-crossover behavior of the system. Low-coordinate transition metal complexes such as these that undergo reversible spin-crossover remain rare, and the spin equilibria of these systems have been studied in detail by a suite of spectroscopic techniques.

Efeito protetor da L-arginina e L-glutamina no pênis de ratos submetidos à irradiação pélvica

Os aminoácidos L-arginina e L-glutamina foram analisados como protetores dos tecidos erétil do pênis contra os danos induzidos pela radiação. Grupos de ratos Wistar foram tratadas com: nenhuma intervenção, radiação pélvica e sacrifício 7 (RAD7) ou 15 (RAD15) dias; e radiação pélvica, a suplementação diária com L-arginina (A) ou L-glutamina (G), e sacrifício 7 (RAD7 + A, RAD7 + G) ou 15 (RAD15 + A, RAD15 + G) dias após irradiação. componentes estruturais do corpo cavernoso (CC), túnica albugínea do corpo esponjoso (TAC), e urotélio do pênis foram analisados através de métodos estereológicos e imuno-histoquímico. Os resultados mostraram que, no CC, o tecido conjuntivo foi maior nos RAD15 (p <0,04), mas essa mudança foi parcialmente revertido em RAD15 + G (p <0,05) e RAD15 + A (p <0,04). A matriz fibrosa das trabéculas CC estava manchada de colágeno tipo I. Nos RAD15, a intensidade da marcação foi aumentada, enquanto que em RAD15 + G + A e RAD15 a coloração era semelhante à dos controles. Nenhuma alteração de coloração foram observadas nos grupos que foram sacrificados sete dias após a radiação. Cavernosa teor de fibras elásticas na RAD15 foi aumentada (p <0,004), e este foi impedido de RAD15 + A (p <0,004), mas não em RAD15 + G. No TAC, os aminoácidos protegidos (p <0,02) contra o aumento da radiação induzida em fibras elásticas, mas apenas em RAD15. Densidade das células do urotélio e espessura urothellial, foram reduzidos em RAD15 (p <0,004), mas houve efeitos protetores dos dois aminoácidos. Em conclusão, a radiação induzida por alterações nas estruturas penianas tendem a ser mais pronunciado 15 dias após a sessão de radiação. Tanto A e G têm efeitos protetores contra estas alterações, sendo o primeiro um pouco mais eficaz.

几种不同产地软玉的岩相结构和无破损成分分析

利用质子激发X射线荧光（PIXE）、X射线衍射（XRD）、扫描电子显微镜（SEM）以及激光拉曼光谱（LRS）技术对几个来自中国新疆、俄罗斯、加拿大和新西兰等地的软玉样品的进行了岩石矿物学特征分析,从成分组成和微观织构方面比较了各地软玉的不同特征.实验结果显示了软玉作为透闪石质玉石,随着Fe2O3含量的增加,逐步向阳起石过渡.中国和田玉以其特有的毛毡状纤维交织结构,形成了均匀细腻、油脂光泽的表面特征.无破损成分分析方法为研究贵重的古玉样品提供了技术支持.

Uncovering the role of free volume in biomaterials and biological matter

134 p.

In Vitro Degradation of Poly(caprolactone)/nHA Composites

The degradation behavior and mechanical properties of polycaprolactone/nanohydroxyapatite composite scaffolds are studied in phosphate buffered solution (PBS), at 37 degrees C, over 16 weeks. Under scanning electron microscopy (SEM), it was observed that the longer the porous scaffolds remained in the PBS, the more significant the thickening of the pore walls of the scaffold morphology was. A decrease in the compressive properties, such as the modulus and the strength of the PCL/nHA composite scaffolds, was observed as the degradation experiment progressed. Samples with high nHA concentrations degraded more significantly in comparison to those with a lower content. Pure PCL retained its mechanical properties comparatively well in the study over the period of degradation. After the twelfth week, the results obtained by GPC analysis indicated a significant reduction in their molecular weight. The addition of nHA particles to the scaffolds accelerated the weight loss of the composites and increased their capacity to absorb water during the initial degradation process. The addition of these particles also affected the degradation behavior of the composite scaffolds, although they were not effective at compensating the decrease in pH prompted by the degradation products of the PCL.

Biocompatibilidade do polissacarídeo celulósico sintetizado por zoogloea sp.: um estudo em bexigas de coelho

Atualmente, o material utilizado para o tratamento endoscópico é o Deflux, porém este é um material não-biológico. Sabe-se que a substância ideal deve ser atóxica, biocompatível, não-migratória, não-antigênica e deve causar o mínimo possível de inflamação no local do implante. A bactéria Zoogloea sp. produz um exopolissacarídeo celulósico (CEP) com baixa citotoxicidade e alto biocompatibilidade. O objetivo deste estudo é investigar, na bexiga de coelho, a biocompatibilidade de implantes de exopolissacarídeo de celulose, produzidos pela Zooglea sp. Foram utilizados como modelo experimental, 20 coelhos adultos da raça Califórnia, com média de seis meses de idade. Os animais foram divididos em dois grupos, sendo o grupo G1, composto por animais mortos três dias após a aplicação do implante (n=9), e o grupo G2, composto por animais mortos três meses após a aplicação do implante (n=11). Cada animal recebeu, no total, quatro implantes, sendo dois de gel de biopolímero e dois de gel Deflux. Foram realizadas as técnicas imunohistoquímicas para marcação de colágeno tipos I e III, alfa-actina de músculo liso, PCNA e reação química TUNEL. Nas amostras de três dias, os implantes de CEP e deflux, eram estruturalmente homogêneos e livres de células inflamatórias ou vasos sanguíneos. Por outro lado, nas amostras de três meses, com exceção de algumas áreas, o CEP estava organizado como feixes curtos que eram sugestivos de um tecido fibroso. Apesar disso, o implante de CEP corou negativamente para colágenos tipos I e III, fibras elásticas, enquanto que o tricrômico de masson, não indicou a presença de colágeno. Em contraste as áreas de implante de deflux nas amostras de três meses estavam fragmentadas, mas ainda eram homogêneas, e ainda não havia nenhuma célula nem vaso sanguíneo em seu interior. As células positivas para PCNA podiam ser claramente percebidas dentro dessas ilhotas, dessa forma indicando um processo inflamatórioproliferativo, em curso. No grupo sacrificado aos três meses, os implantes de deflux ainda estavam negativos, mas em torno das áreas de CEP algumas células positivas para a técnica do TUNEL eram perceptíveis. Nos implantes de CEP de três meses, muitos vasos sanguíneos eram visualizados, e a sua densidade era de 23.865.48. A densidade de microvasos na lâmina própria (41.5111.19) foi significativamente diferente (p<0.001) daquela no implante de CEP. Nossos resultados mostraram que o CEP possui pouca imunogenicidade e se integra melhor no tecido hospedeiro quando comparado ao deflux. Portanto o CEP deve ser um material eficiente em casos em que a incorporação ao tecido é desejada como por exemplo em estruturas de suporte na cirurgia de reconstrução