Oil Flow Rate Measurements Using 198au And Total Count Technique

In industrial plants, oil and oil compounds are usually transported by closed pipelines with circular cross-section. The use of radiotracers in oil transport and processing industrial facilities allows calibrating flowmeters, measuring mean residence time in cracking columns, locate points of obstruction or leak in underground ducts, as well as investigating flow behavior or industrial processes such as in distillation towers. Inspection techniques using radiotracers are non-destructive, simple, economic and highly accurate. Among them, Total Count, which uses a small amount of radiotracer with known activity, is acknowledged as an absolute technique for flow rate measurement. A viscous fluid transport system, composed by four PVC pipelines with 13m length (12m horizontal and 1m vertical) and ½, ¾, 1 and 2-inch gauges, respectively, interconnected by maneuvering valves was designed and assembled in order to conduct the research. This system was used to simulate different flow conditions of petroleum compounds and for experimental studies of flow profile in the horizontal and upward directions. As 198Au presents a single photopeak (411,8 keV), it was the radioisotope chosen for oil labeling, in small amounts (6 ml) or around 200 kBq activity, and it was injected in the oil transport lines. A NaI scintillation detector 2”x 2”, with well-defined geometry, was used to measure total activity, determine the calibration factor F and, positioned after a homogenization distance and interconnected to a standardized electronic set of nuclear instrumentation modules (NIM), to detect the radioactive cloud.

The Role of the Ocean Economy in the National Income Accounts of Indonesia

This paper presents the role of the Ocean Economy in the National Income Accounts of Indonesia including the concept and methodology used to estimate the contribution of this ecosystem to Indonesian value added. Currently, the national income account of Indonesia only recognizes the fishery sector. Fishery activities have been considered as one of the sub-sectors of agricultural sector together with sub-sectors of farm food crops, plantation or non-food crops, forestry, and livestock. There are some drawbacks in the concept of national income accounts, since it follows the UN system of national accounts (SNA) that recognize only economic sectors or activities which produce the value added, while it does not recognize the ecosystems such as lakes and river ecosystems, forests as well as terrestrial and ocean ecosystems as production sectors. The present concept of the SNA produces an undervaluation of forest and ocean sectors, which in turn may direct the policy makers to have a tendency to deplete the forestry and fishery resources in order to increase the contribution of those two sectors to the national income accounts. Otherwise, the two sectors will be allocated small national budget for their operations. Therefore the paper concludes that a new concept of national income accounts based on ecosystem products and services to be developed, as a satellite account to the national income account is needed. Furthermore the new concept of national income account for the ocean economy should adopt the UN System of Environmental and Economic Accounts, which takes into account the extractive and non-extractive products as environmental and biological services in to the ocean income account. The new concept of ocean accounting based on both extractive and non-extractive products instead of only based on the extractive one which have market values may guarantee the sustainability of the ocean in particular and will be good for the whole economy of the country in generally. Hence the national income accounts of the ocean economy will show how the blue economy or the ocean economy really function as one of the important sectors for the whole economy of the country.

Production économique d’un solvant vert à partir de dioxyde de carbone (CO2)

Depuis que l’industrie chimique vise à rejeter de moins en moins de gaz à effet de serre, cette dernière cherche à revaloriser les différents gaz à effet de serre tel que le dioxyde de carbone. Une des techniques est de combiner le dioxyde de carbone avec de l’ammoniac pour synthétiser l’urée qui pourrait par la suite être utilisé soit directement ou soit comme intermédiaire, pour la synthèse catalytique du diméthyle carbonate (DMC). Le DMC est à la base de plusieurs applications industrielles telles que la synthèse des polymères (les polycarbonates), les réactions de trans-estérification menant à d’autres carbonates comme le diphénylcarbonate et comme agent de méthylation ou d’alkylation. Plusieurs articles provenant de la littérature scientifique rapportent que le DMC peut être utilisé comme additif oxygéné dans les carburants tels l’essence [1]. Le but de ce projet est de déterminer la viabilité industrielle de la production de DMC par la méthylation de l’urée en premier lieu en méthyle carbamate puis en DMC. La première étape de ce projet reposera donc dans un premier temps sur la confirmation des résultats rapportés au sein de la littérature ouverte pour par la suite faire une étude de l’impact des différents types de catalyseurs et des conditions expérimentales sur le rendement de la réaction. Une fois que le montage batch sera optimisé, ce dernier sera modifié pour opérer en continu. Cette modification a pour but d’augmenter le rendement et la sélectivité pour éventuellement de l’adapter industriellement. Selon la littérature, les rendements anticipés pour la réaction batch sont d’environ 30 % [2] et pour un système en continu de plus de 50 %.

Etnografia visual das mangabeiras nas matas do tabuleiro costeiro.

This work is an ethnographic research with collectors women of Mangaba in the village of Ponta Negra in Natal - RN. This Women also known as Mangabeira's women reproduce a practice learned with their ancestors, collecting this fruit in the coastal tablelands forests and latter commercializing it in the local markets. This research uses the methodology of oral history and visual anthropology with presentation of collected images on board. It is intended to emphasize the botanical and environmental aspects of the Mangabeira plant, its ecosystem, territorial, economic and historical aspects of it, also the knowledge of this extractive practice of our immaterial culture.

The role of glass modifiers in the solubility of Tm3+ ions in As2S3 glasses

Au cours des années une variété des compositions de verre chalcogénure a été étudiée en tant qu’une matrice hôte pour les ions Terres Rares (TR). Pourtant, l’obtention d’une matrice de verre avec une haute solubilité des ions TR et la fabrication d’une fibre chalcogénure dopée au TR avec une bonne qualité optique reste toujours un grand défi. La présente thèse de doctorat se concentre sur l’étude de nouveaux systèmes vitreux comme des matrices hôtes pour le dopage des ions TR, ce qui a permis d’obtenir des fibres optiques dopées au TR qui sont transparents dans l’IR proche et moyenne. Les systèmes vitreux étudiés ont été basés sur le verre de sulfure d’arsenic (As2S3) co-dopé aux ions de Tm3+ et aux différents modificateurs du verre. Premièrement, l’addition de Gallium (Ga), comme un co-dopant, a été examinée et son influence sur les propriétés d’émission des ions de Tm a été explorée. Avec l’incorporation de Ga, la matrice d’As2S3 dopée au Tm a montré trois bandes d’émission à 1.2 μm (1H5→3H6), 1.4 μm (3H4→3F4) et 1.8 μm (3F4→3H6), sous l’excitation des longueurs d’onde de 698 nm et 800 nm. Les concentrations de Tm et de Ga ont été optimisées afin d’obtenir le meilleur rendement possible de photoluminescence. À partir de la composition optimale, la fibre Ga-As-S dopée au Tm3+ a été étirée et ses propriétés de luminescence ont été étudiées. Un mécanisme de formation structurale a été proposé pour ce système vitreux par la caractérisation structurale des verres Ga-As-S dopés au Tm3+, en utilisant la spectroscopie Raman et l’analyse de spectrométrie d’absorption des rayons X (EXAFS) à seuil K d’As, seuil K de Ga et seuil L3 de Tm et il a été corrélé avec les caractéristiques de luminescence de Tm. Dans la deuxième partie, la modification des verres As2S3 dopés au Tm3+, avec l’incorporation d’halogénures (Iode (I2)), a été étudiée en tant qu’une méthode pour l’adaptation des paramètres du procédé de purification afin d’obtenir une matrice de verre de haute pureté par distillation chimique. Les trois bandes d’émission susmentionnées ont été aussi bien observées pour ce système sous l’excitation à 800 nm. Les propriétés optiques, thermiques et structurelles de ces systèmes vitreux ont été caractérisées expérimentalement en fonction de la concentration d’I2 et de Tm dans le verre, où l’attention a été concentrée sur deux aspects principaux: l’influence de la concentration d’I2 sur l’intensité d’émission de Tm et les mécanismes responsables pour l’augmentation de la solubilité des ions de Tm dans la matrice d’As2S3 avec l’addition I2.

Ferulates and lignin structural composition in cork

The structure of lignin and suberin, and ferulic acid (FA) content in cork from Quercus suber L. were studied. Extractive-free cork (Cork), suberin, desuberized cork (Cork(sap)), and milled-cork lignins (MCL) from Cork and Cork(sap) were isolated. Suberin composition was determined by GC-MS/FID, whereas the polymers structure in Cork, Corksap, and MCL was studied by Py-TMAH and 2D-HSQC-NMR. Suberin contained 94.4% of aliphatics and 3.2% of phenolics, with 90% of omega-hydroxyacids and alpha,omega-diacids. FA represented 2.7% of the suberin monomers, overwhelmingly esterified to the cork matrix. Py-TMAH revealed significant FA amounts in all samples, with about 3% and 6% in cork and cork lignins, respectively. Py-TMAH and 2D-HSQC-NMR demonstrated that cork lignin is a G-lignin (>96% G units), with a structure dominated by beta-O-4' alkyl-aryl ether linkages (80% and 77% of all linkages in MCL and MCLsap, respectively), followed by phenylcoumarans (18% and 20% in MCL and MCLsap, respectively), and smaller amounts of resinols (ca. 2%) and dibenzodioxocins (1%). HSQC also revealed that cork lignin is heavily acylated (ca. 50%) exclusively at the side-chain gamma-position. Ferulates possibly have an important function in the chemical assembly of cork cell walls with a cross-linking role between suberin, lignin and carbohydrates.

Implante imediato com carga imediata

Dois estágios cirúrgicos, somados a um período de cicatrização de três a seis meses, com a ausência de cargas funcionais foram estabelecidos por Bränemark, em 1977, como protocolo cirúrgico da terapia com implantes osteointegrados. Somente após esse tempo de cicatrização, poderia ocorrer a activação dos implantes e confecção das próteses. O desenvolvimento de vários estudos, com a finalidade de abreviar esse período de cicatrização, a simplificação da terapia restauradora, somados aos avanços tecnológicos, e aos altos índices de sucesso, tornaram os implantes imediatos com carga imediata, uma realidade na reabilitação total ou parcial com implantes, abreviando o tempo de cicatrização, com a colocação de uma prótese provisória imediata, logo no final do primeiro estágio cirúrgico. Para a pesquisa bibliográfica foram utilizadas as palavras-chave immediate loading, immediate provisionalization, post-extractive implant, immediate implant, single tooth implant, post extraction sockets, immediate temporization.

Crescimento e desenvolvimento de Plinia cauliflora de acordo com a intensidade luminosa em clima subtropical

The jabuticaba fruit tree from classified in the Myrtaceae family and Plinia genre. There are about nine species of this fruit tree, that include as most important, Plinia trunciflora (jabuticaba de cabinho), naturally occurring in southwestern Paraná State, Brazil, P. cauliflora (jabuticaba Paulista or Jabuticaba Açu) and P. jaboticaba (Vell) (jabuticaba sabará), with all the over species producing fruit for the industry or fresh consumption. Nevertheless, there aren‟t commercial orchards with this culture, with highest yield part from extractive. This fact can be combined with lack of technical knowledge for the plants produce in the field. As these species are found in the forest, the first point is whether they can adapt to other light intensity conditions. The aim of this work was to identify the adaptive behavior of jabuticaba fruit seedling and tree when they were put in different light intensities and what this can be considered ideal for the growth, as well as, its influence in the leaves secondary compounds production. Two experiments were conducted, with the first involved with the study of the seedlings and the second with plants in the field. The work was carried out at Universidade Tecnológica Federal do Paraná – Câmpus Dois Vizinhos, Paraná State - Brazil. The experimental design was a completely randomized and a block design with four treatments and four replications of 10 seedlings or two plants per plot, according to nursery or orchard conditions, respectively. The treatments were base according to the light intensity. The treatments used were, 1 - full sun, similar the orchard condition, with 0% shading; 2 - side cover with shade cloth and top with transparent plastic, representing a gap forest condition; 3 - side and top cover with shade cloth, representing stage where the forest canopy is closing, focusing only indirect sunlight; 4 - side and top cover with shade cloth, simulating a closed canopy condition, with PPD (photon flux density) of 10% (90% shading); 5 - side and top cover with shade cloth, simulating a more open canopy condition with PPD 65% (35% shading). The growth and development seedling and plant characteristics were evaluated once by month, as also, during time part in the plants the secondary metabolites leaves, soil activity microbiological and the fresh and dry matter root and shoot and, root length from seedlings. For the growth and development of jabuticaba Açú Paulista seedling recommend to use of side cover with shade cloth and top with transparent plastic, representing a gap forest condition. In orchard, for the growth and development of plants jabuticaba Híbrida tree it was recommended the use of side and top cover with shade cloth of some type. For production of secondary metabolites of leaves, the plant must to be full sunlight condition orchard.

Anise Myrtle (Syzygium anisatum) Oils

Syzygium anisatum (formerly Backhousia anisata and Anetholea anisata) is an Australian rainforest tree with leaves that produce an essential oil (EO) that has the characteristic aroma of aniseed. It is referred to as aniseed myrtle or anise myrtle in the trade and the fresh and dried leaves of this plant are used as a herb in culinary applications. The EO is extracted by steam distillation of the leaves and the major aromatic volatile compound is anethole. The EO has broad spectrum antimicrobial activity but is more effective against bacteria than fungi. Indigenous Australians have used anise myrtle for its medicinal values and in recent times it has been used as a flavoring agent by the food and beverage industry. This chapter covers the use of anise myrtle EO in food and agricultural applications, botanical aspects, and chemical composition.

Concentrating solar power + desalination plants (CSP+D): models and performance analysis

Tese submetida à Universidade de Lisboa, Instituto Superior Técnico e aprovada em provas públicas para a obtenção do Grau de Doutor em Sistemas Sustentáveis de Energia.

Climate Change Influences Carrying Capacity in a Coastal Embayment Dedicated to Shellfish Aquaculture

A spatially explicit coupled hydrodynamic-biogeochemical model was developed to study a coastal ecosystem under the combined effects of mussel aquaculture, nutrient loading and climate change. The model was applied to St Peter's Bay (SPB), Prince Edward Island, Eastern Canada. Approximately 40 % of the SPB area is dedicated to mussel (Mytilus edulis) longline culture. Results indicate that the two main food sources for mussels, phytoplankton and organic detritus, are most depleted in the central part of the embayment. Results also suggest that the system is near its ultimate capacity, a state where the energy cycle is restricted to nitrogen-phytoplankton-detritus-mussels with few resources left to be transferred to higher trophic levels. Annually, mussel meat harvesting extracts nitrogen (N) resources equivalent to 42 % of river inputs or 46.5 % of the net phytoplankton primary production. Under such extractive pressure, the phytoplankton biomass is being curtailed to 1980's levels when aquaculture was not yet developed and N loading was half the present level. Current mussel stocks also decrease bay-scale sedimentation rates by 14 %. Finally, a climate change scenario (year 2050) predicted a 30 % increase in mussel production, largely driven by more efficient utilization of the phytoplankton spring bloom. However, the predicted elevated summer temperatures (> 25 A degrees C) may also have deleterious physiological effects on mussels and possibly increase summer mortality levels. In conclusion, cultivated bivalves may play an important role in remediating the negative impacts of land-derived nutrient loading. Climate change may lead to increases in production and ecological carrying capacity as long as the cultivated species can tolerate warmer summer conditions.

Optimisation de l'extraction, en réacteur "batch", de biomasse énergétique à l'aide d'émulsions ultrasoniques de solvants verts

L’industrie des biocarburants de deuxième génération utilise, entre autre, la biomasse lignocellulosique issue de résidus forestiers et agricoles et celle issue de cultures énergétiques. Le sorgho sucré [Sorghum bicolor (L.) Moench] fait partie de ces cultures énergétiques. L’intérêt croissant de l’industrie agroalimentaire et des biocarburants pour cette plante est dû à sa haute teneur en sucres (jusqu’à 60% en masse sèche). En plus de se développer rapidement (en 5-6 mois), le sorgho sucré a l’avantage de pouvoir croître sur des sols pauvres en nutriments et dans des conditions de faibles apports en eau, ce qui en fait une matière première intéressante pour l’industrie, notamment pour la production de bioéthanol. Le concept de bioraffinerie alliant la production de biocarburants à celle de bioénergies ou de bioproduits est de plus en plus étudié afin de valoriser la production des biocarburants. Dans le contexte d’une bioraffinerie exploitant la biomasse lignocellulosique, il est nécessaire de s’intéresser aux différents métabolites extractibles en plus des macromolécules permettant la fabrication de biocarburants et de biocommodités. Ceux-ci pouvant avoir une haute valeur ajoutée et intéresser l’industrie pharmaceutique ou cosmétique par exemple. Les techniques classiques pour extraire ces métabolites sont notamment l’extraction au Soxhlet et par macération ou percolation, qui sont longues et coûteuses en énergie. Ce projet s’intéresse donc à une méthode d’extraction des métabolites primaires et secondaires du sorgho sucré, moins coûteuse et plus courte, permettant de valoriser économiquement l’exploitation industrielle du de cette culture énergétique. Ce travail au sein de la CRIEC-B a porté spécifiquement sur l’utilisation d’une émulsion ultrasonique eau/carbonate de diméthyle permettant de diminuer les temps d’opération (passant à moins d’une heure au lieu de plusieurs heures) et les quantités de solvants mis en jeu dans le procédé d’extraction. Cette émulsion extractive permet ainsi de solubiliser à la fois les métabolites hydrophiles et ceux hydrophobes. De plus, l’impact environnemental est limité par l’utilisation de solvants respectueux de l’environnement (80 % d’eau et 20 % de carbonate de diméthyle). L’utilisation de deux systèmes d’extraction a été étudiée. L’un consiste en la recirculation de l’émulsion, en continu, au travers du lit de biomasse; le deuxième permet la mise en contact de la biomasse et des solvants avec la sonde à ultrasons, créant l’émulsion et favorisant la sonolyse de la biomasse. Ainsi, en réacteur « batch » avec recirculation de l’émulsion eau/DMC, à 370 mL.min[indice supérieur -1], au sein du lit de biomasse, l’extraction est de 37,91 % en 5 minutes, ce qui est supérieur à la méthode ASTM D1105-96 (34,01 % en 11h). De plus, en réacteur « batch – piston », où la biomasse est en contact direct avec les ultrasons et l’émulsion eau/DMC, les meilleurs rendements sont de 35,39 % en 17,5 minutes, avec 15 psig de pression et 70 % d’amplitude des ultrasons. Des tests effectués sur des particules de sorgho grossières ont donné des résultats similaires avec 30,23 % d’extraits en réacteur « batch » avec recirculation de l’émulsion (5 min, 370 mL.min[indice supérieur -1]) et 34,66 % avec le réacteur « batch-piston » (30 psig, 30 minutes, 95 % d’amplitude).

Análise do circuito de água de refrigeração de uma unidade de regeneração de solventes

A EGEO Solventes S.A. é uma empresa com atividade na área da gestão de resíduos, focando-se na regeneração de solventes. Na unidade industrial da empresa recorre-se à destilação de misturas de solventes usados para obtenção do solvente regenerado. Esta operação exige água para o arrefecimento e condensação dos destilados das misturas de solventes, que, posteriormente, é arrefecida em torres de refrigeração instaladas na unidade. Durante o tempo de operação da unidade foram identificados problemas na condensação dos solventes limpos, obrigando a que se ligassem dois condensadores em série para assegurar a condensação do vapor produzido na destilação e à necessidade de caudais maiores de utilidade fria. Outro dos problemas identificados foi a baixa eficiência das torres de refrigeração, uma vez que a diferença de temperaturas da água à entrada e à saída do equipamento é muito baixa. Assim sendo, o objetivo principal deste trabalho é identificar as principais causas para a baixa eficiência dos equipamentos e propor alterações aos equipamentos ou soluções de melhoria do processo. Para diagnosticar estes problemas foram recolhidas amostras para determinação da composição do solvente limpo obtido e registadas as condições de operação para obtenção da mistura ECOSOLVE MET. Recorrendo a metodologias de projeto determinou-se o fator de resistência do fouling no condensador C1 e seguidamente a geometria, a alocação de correntes e a orientação do condensador mais adequadas e concluiu-se que este está sujeito a uma forte acumulação de material nas paredes e que a melhor opção seria recorrer a um permutador horizontal com condensação na carcaça, mas aumentando o número de passagens da água nos tubos. No que diz respeito à operação da torre de arrefecimento, determinou-se o caudal mínimo de ar para determinadas condições de operação e verificou-se que o caudal de ar alimentado à torre era superior ao mínimo determinado. Foram observadas diferenças quando comparadas as condições de operação experimentais com a performance da unidade usando oito enchimentos estruturados e aleatórios para os quais há dados na literatura São também apresentadas alternativas de operação e o projeto de uma torre de arrefecimento de água, sustentada numa análise económica de todo o processo. As simulações foram realizadas com recurso ao AspenPlus®.

Monitoramento sazonal da atividade antioxidante das folhas de Erythroxylum suberosum A.St.-Hil. : correlação com o teor de hiperosídeo e isoquercitrina

Dissertação (mestrado em Ciências Farmacêuticas)—Universidade de Brasília, Faculdade de Ciências da Saúde, Pós-graduação em Ciências Farmacêuticas, 2015.

Caracterização geoquímica dos ecossistemas na zona de protecção às Fontes das Cinco Bicas e da Saúde

O concelho de Pombal possui uma elevada riqueza em Recursos Naturais, nomeadamente em Recursos Minerais e Nascentes Naturais. De entre as Nascentes Naturais existentes neste concelho, as Fontes das Cinco Bicas e da Saúde, têm sido privilegiadas, devido à qualidade bacteriológica e química das suas águas e à sua localização geográfica (zona ainda não abastecida com água da rede pública), sendo alvo de estudos e de um vasto trabalho, por parte do Município, de onde surgiu a delimitação de uma Zona de Protecção, de importância relevante para a população concelhia. A Zona de Protecção às Fontes das Cinco Bicas e da Saúde, abrange três zonas, sendo elas designadas por próxima, intermédia e alargada. Este estudo, tem como objectivo fundamental, a caracterização geoquímica e ambiental, de uma área de 8 Km2, envolvendo a zona delimitada como “Zona de Protecção às Fontes das Cinco Bicas e da Saúde”, utilizando os solos e a água como meios amostrais. A área de trabalho abrange também parte da Área declarada de Reserva (Área de Reserva – A), para efeitos de aproveitamento de Argilas Especiais (Decreto – Regulamentar n.º 35/95, de 22 de Novembro), e toda ela está inserida na área declarada Cativa, para efeitos de exploração de Argilas (Portaria n.º 448/90 de 16 de Junho), pelo que existem vários núcleos de actividade extractiva em laboração. Este trabalho vai permitir caracterizar ambientalmente a área de estudo, a água das nascentes em causa, bem como analisar a possível interferência das unidades industriais e agrícolas nas Fontes das Cinco Bicas e da Saúde.