Do Productivity Improvements Move Us Along the Environmental Kuznets Curve?

The Environmental Kuznets Curve (EKC) hypothesis focuses on the argument that rising prosperity will eventually be accompanied by falling pollution levels as a result of one or more of three factors: (1) structural change in the economy; (2) demand for environmental quality increasing at a more-than-proportional rate; (3) technological progress. Here, we focus on the third of these. In particular, energy efficiency is commonly regarded as a key element of climate policy in terms of achieving reductions in economy-wide CO2 emissions over time. However, a growing literature suggests that improvements in energy efficiency will lead to rebound (or backfire) effects that partially (or wholly) offset energy savings from efficiency improvements. Where efficiency improvements are aimed at the production side of the economy, the net impact of increased efficiency in any input to production will depend on the combination and relative strength of substitution, output/competitiveness, composition and income effects that occur in response to changes in effective and actual factor prices, as well as on the structure of the economy in question, including which sectors are targeted with the efficiency improvement. In this paper we consider whether increasing labour productivity will have a more beneficial, or more predictable, impact on CO2/GDP ratios than improvements in energy efficiency. We do this by using CGE models of the Scottish regional and UK national economies to analyse the impacts of a simple 5% exogenous (and costless) increase in energy or labour augmenting technological progress.

How do improvements in labour productivity in the Scottish economy affect the UK position on the Environmental Kuznets Curve?

The research reported here is an output of Karen Turner’s ESRC Climate Change Leadership Fellow project (Grant reference RES-066-27-0029). However, this research builds on previous work funded by the ESRC on modelling the economic and environmental impacts of technological improvement (Grant reference: RES-061-25-0010) and by the EPSRC through the SuperGen Marine Energy Research Consortium on accounting for and modeling environmental indicators (Grant reference: EP/E040136/1).

An interregional input-output analysis of the pollution content of trade flows and environmental trade balances between five states in the US Mid-West

In this paper we attempt an empirical application of the multi-region input-output (MRIO) method in order to enumerate the pollution content of interregional trade flows between five Mid-West regions/states in the US –Illinois, Indiana, Iowa, Michigan and Wisconsin – and the rest of the US. This allows us to analyse some very important issues in terms of the nature and significance of interregional environmental spillovers within the US Mid-West and the existence of pollution ‘trade balances’ between states. Our results raise questions in terms of the extent to which authorities at State level can control local emissions where they are limited in the way some emissions can be controlled, particularly with respect to changes in demand elsewhere in the Mid-West and US. This implies a need for policy co-ordination between national and state level authorities in the US to meet emissions reductions targets. The existence of an environmental trade balances between states also raises issues in terms of net losses/gains in terms of pollutants as a result of interregional trade within the US and whether, if certain activities can be carried out using less polluting technology in one region relative to others, it is better for the US as a whole if this type of relationship exists.

Environmental Degradation and the Limits to LOV

We show how consumers’ environmental concerns may limit ‘love of variety’ (LOV) and be reflected in consumers decisions. We investigate how the impact of environmental degradation on LOV influences demand and optimal product variety, and how a pollution tax on firms might be used to improve upon the market outcome and increase welfare.

Global Warming And Extreme Events: Rethinking The Timing And Intensity Of Environmental Policy

The possibility of low-probability extreme events has reignited the debate over the optimal intensity and timing of climate policy. In this paper we therefore contribute to the literature by assessing the implications of low-probability extreme events on environmental policy in a continuous-time real options model with “tail risk”. In a nutshell, our results indicate the importance of tail risk and call for foresighted pre-emptive climate policies.

First-and second-best allocations under economic and environmental uncertainty

This paper uses a micro-founded DSGE model to compare second-best optimal environmental policy and the resulting allocation to first-best allocation. The focus is on the source and size of uncertainty, and how this affects optimal choices and the inferiority of second best vis-à-vis first best.

Environmental Kuznets Curves for Carbon Emissions: A Critical Survey

The empirical finding of an inverse U-shaped relationship between per capita income and pollution, the so-called Environmental Kuznets Curve (EKC), suggests that as countries experience economic growth, environmental deterioration decelerates and thus becomes less of an issue. Focusing on the prime example of carbon emissions, the present article provides a critical review of the new econometric techniques that have questioned the baseline polynomial specification in the EKC literature. We discuss issues related to the functional form, heterogeneity, “spurious” regressions and spatial dependence to address whether and to what extent the EKC can be observed. Despite these new approaches, there is still no clear-cut evidence supporting the existence of the EKC for carbon emissions. JEL classifications: C20; Q32; Q50; O13 Keywords: Environmental Kuznets Curve; Carbon emissions; Functional form; Heterogeneity; “Spurious” regressions; Spatial dependence.Residential satisfaction is often used as a barometer to assess the performance of public policy and programmes designed to raise individuals' well-being. However, the fact that responses elicited from residents might be biased by subjective, non-observable factors casts doubt on whether these responses can be taken as trustable indicators of the individuals' housing situation. Emotional factors such as aspirations or expectations might affect individuals' cognitions of their true residential situation. To disentangle this puzzle, we investigated whether identical residential attributes can be perceived differently depending on tenure status. Our results indicate that tenure status is crucial not only in determining the level of housing satisfaction, but also regarding how dwellers perceive their housing characteristics. Keywords: Housing satisfaction, subjective well-being, homeownership. JEL classification: D1, R2.

The Effects of Experience on Preference Uncertainty: Theory and Empirics for Public and Quasi-Public Environmental Goods

This paper develop and estimates a model of demand estimation for environmental public goods which allows for consumers to learn about their preferences through consumption experiences. We develop a theoretical model of Bayesian updating, perform comparative statics over the model, and show how the theoretical model can be consistently incorporated into a reduced form econometric model. We then estimate the model using data collected for two environmental goods. We find that the predictions of the theoretical exercise that additional experience makes consumers more certain over their preferences in both mean and variance are supported in each case.

Consumer Behaviour in a Social Context: Implications for Environmental Policy

In this paper we summarise some of our recent work on consumer behaviour, drawing on recent developments in behavioural economics, in which consumers are embedded in a social context, so their behaviour is shaped by their interactions with other consumers. For the purpose of this paper we also allow consumption to cause environmental damage. Analysing the social context of consumption naturally lends itself to the use of game theoretic tools, and indicates that we seek to develop links between economics and sociology rather than economics and psychology, which has been the more predominant field for work in behavioural economics. We shall be concerned with three sets of issues: conspicuous consumption, consumption norms and altruistic behaviour. Our aim is to show that building links between sociological and economic approaches to the study of consumer behaviour can lead to significant and surprising implications for conventional economic policy prescriptions, especially with respect to environmental policy.

Moral Behaviour, Altruism and Environmental Policy

Free‐riding is often associated with self‐interested behaviour. However if there is a global mixed pollutant, free‐riding will arise if individuals calculate that their emissions are negligible relative to the total, so total emissions and hence any damage that they and others suffer will be unaffected by whatever consumption choice they make. In this context consumer behaviour and the optimal environmental tax are independent of the degree of altruism. For behaviour to change, individuals need to make their decisions in a different way. We propose a new theory of moral behaviour whereby individuals recognise that they will be worse off by not acting in their own self‐interest, and balance this cost off against the hypothetical moral value of adopting a Kantian form of behaviour, that is by calculating the consequences of their action by asking what would happen if everyone else acted in the same way as they did. We show that: (a) if individuals behave this way, then altruism matters and the greater the degree of altruism the more individuals cut back their consumption of a ’dirty’ good; (b) nevertheless the optimal environmental tax is exactly the same as that emerging from classical analysis where individuals act in self‐interested fashion.

3D geoelectrical monitoring to follow hydric soil behaviour during rainfall

RESUME Durant les dernières années, les méthodes électriques ont souvent été utilisées pour l'investigation des structures de subsurface. L'imagerie électrique (Electrical Resistivity Tomography, ERT) est une technique de prospection non-invasive et spatialement intégrée. La méthode ERT a subi des améliorations significatives avec le développement de nouveaux algorithmes d'inversion et le perfectionnement des techniques d'acquisition. La technologie multicanale et les ordinateurs de dernière génération permettent la collecte et le traitement de données en quelques heures. Les domaines d'application sont nombreux et divers: géologie et hydrogéologie, génie civil et géotechnique, archéologie et études environnementales. En particulier, les méthodes électriques sont souvent employées dans l'étude hydrologique de la zone vadose. Le but de ce travail est le développement d'un système de monitorage 3D automatique, non- invasif, fiable, peu coûteux, basé sur une technique multicanale et approprié pour suivre les variations de résistivité électrique dans le sous-sol lors d'événements pluvieux. En raison des limitations techniques et afin d'éviter toute perturbation physique dans la subsurface, ce dispositif de mesure emploie une installation non-conventionnelle, où toutes les électrodes de courant sont placées au bord de la zone d'étude. Le dispositif le plus approprié pour suivre les variations verticales et latérales de la résistivité électrique à partir d'une installation permanente a été choisi à l'aide de modélisations numériques. Les résultats démontrent que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle et plus apte à détecter les variations latérales et verticales de la résistivité électrique, et cela malgré la configuration non-conventionnelle des électrodes. Pour tester l'efficacité du système proposé, des données de terrain ont été collectées sur un site d'étude expérimental. La technique de monitorage utilisée permet de suivre le processus d'infiltration 3D pendant des événements pluvieux. Une bonne corrélation est observée entre les résultats de modélisation numérique et les données de terrain, confirmant par ailleurs que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle. La nouvelle technique de monitorage 3D de résistivité électrique permet de caractériser les zones d'écoulement préférentiel et de caractériser le rôle de la lithologie et de la pédologie de manière quantitative dans les processus hydrologiques responsables d'écoulement de crue. ABSTRACT During the last years, electrical methods were often used for the investigation of subsurface structures. Electrical resistivity tomography (ERT) has been reported to be a useful non-invasive and spatially integrative prospecting technique. The ERT method provides significant improvements, with the developments of new inversion algorithms, and the increasing efficiency of data collection techniques. Multichannel technology and powerful computers allow collecting and processing resistivity data within few hours. Application domains are numerous and varied: geology and hydrogeology, civil engineering and geotechnics, archaeology and environmental studies. In particular, electrical methods are commonly used in hydrological studies of the vadose zone. The aim of this study was to develop a multichannel, automatic, non-invasive, reliable and inexpensive 3D monitoring system designed to follow electrical resistivity variations in soil during rainfall. Because of technical limitations and in order to not disturb the subsurface, the proposed measurement device uses a non-conventional electrode set-up, where all the current electrodes are located near the edges of the survey grid. Using numerical modelling, the most appropriate arrays were selected to detect vertical and lateral variations of the electrical resistivity in the framework of a permanent surveying installation system. The results show that a pole-dipole array has a better resolution than a pole-pole array and can successfully follow vertical and lateral resistivity variations despite the non-conventional electrode configuration used. Field data are then collected at a test site to assess the efficiency of the proposed monitoring technique. The system allows following the 3D infiltration processes during a rainfall event. A good correlation between the results of numerical modelling and field data results can be observed since the field pole-dipole data give a better resolution image than the pole-pole data. The new device and technique makes it possible to better characterize the zones of preferential flow and to quantify the role of lithology and pedology in flood- generating hydrological processes.

Estimating the Impact on Efficiency of the Adoption of a Voluntary Environmental Standard: An Empirical Study of the Global Copper Mining Industry

This paper uses data on the world's copper mining industry to measure the impact on efficiency of the adoption of the ISO 14001 environmental standard. Anecdotal and case study literature suggests that firms are motivated to adopt this standard so as to achieve greater efficiency through changes in operating procedures and processes. Using plant level panel data from 1992-2007 on most of the world's industrial copper mines, the study uses stochastic frontier methods to investigate the effects of ISO adoption. The variety of models used in this study find that adoption either tends to improve efficiency or has no impact on efficiency, but no evidence is found that ISO adoption decreases efficiency.

Siliceous deep-sea sponge Monorhaphis chuni: A potential paleoclimate archive in ancient animals

The deep-sea sponge Monorhaphis chuni forms giant basal spicules, which can reach lengths of 3 m; they represent the largest biogenic silica structures on Earth that is formed from an individual metazoan. The spicules offer a unique opportunity to record environmental change of past oceanic and climatic conditions. A giant spicule collected in the East China Sea in a depth of 1110 m was investigated. The oxygen isotopic composition and Mg/Ca ratios determined along center-to-surface segments are used as geochemical proxies for the assessment of seawater paleotemperatures. Calculations are based on the assumption that the calculated temperature near the surface of the spicule is identical with the average ambient temperature of 4 degrees C. A seawater temperature of 1.9 degrees C is inferred for the beginning of the lifespan of the Monorhaphis specimen. The temperature increases smoothly to 2.3 degrees C, to be followed by sharply increased and variable temperatures up to 6-10 degrees C. In the outer part of the spicule, the inferred seawater temperature is about 4 degrees C. The lifespan of the spicule can be estimated to 11,000 +/- 3000 years using the long-term trend of the inferred temperatures fitted to the seawater temperature age relationships since the Last Glacial Maximum. Specimens of Monorhaphis therefore represents one the oldest living animals on Earth. The remarkable temperature spikes of the ambient seawater occurring 9500-3100 years B.P. are explained by discharges of hydrothermal fluids in the neighborhood of the spicule. The irregular lamellar organization of the spicule and the elevated Mn concentrations during the high-temperature growth are consistent with a hydrothermal fluid input. (C) 2012 Elsevier B.V. All rights reserved.