1000 resultados para Enginyeria química
Resumo:
In this work a micro-heater device to be used as an integral part of the flow analysis manifold is described. The usefulness of the device was demonstrated using it in the development of a multicommutated flow analysis procedure for the spectrophotometric determination of manganese in plant digest. The method was based on the manganese oxidation by periodate in phosphoric acid medium to form the permanganate anion. The reaction development is dependent on the temperature and it was observed that at 25 °C a time interval of ca. 15 min was necessary for the reaction to attain equilibrium. Setting the temperature to 70 ºC, this time interval could be decreased to ca. 30 s. This condition was easily attained employing the proposed micro-heater device coupled to the manifold. The procedure was applied to manganese determination in soybean digests and results compared with those obtained by inductively coupled argon plasma optical emission spectrometry (ICP-OES). No significant difference at 90% confidence level was observed. A linear response for sample concentrations ranging from 5.0 to 30.00 mg L-1 Mn2+; a relative standard deviation of 1.3% (n = 6) for a typical sample containing 6.3 mg L-1 Mn2+; a sampling rate of 22 determinations per hour; a low reagent consumption, of 12.0 mg NaIO4 per determination; and a detection limit of 1.2 mg L-1 were achieved.
Resumo:
This paper provides a survey of general aspects involved in the coordination chemistry of low-valent (mainly +III,+II), low-spin (d p5,d p6) ruthenium ions with ethylenediamine-N,N,N',N'-tetraacetate (edta) and their substituted derivatives. The topics covered herein include structure, reactivity, kinetics, thermodynamics, electrochemistry and spectroscopy. The contributions from either our research group or the literature over the last three decades are focused in this review.
Resumo:
Algae constitute a large group of many different organisms, essentially aquatic and able to live in all systems giving them sufficient light and humidity. Some algae species have been used in the evaluation or in the bioremediation of aquatic systems. More recently algae have been suggested as interesting tools in the field of analytical chemistry. In this work the most important aspects related to the different uses of algae are presented with a brief discussion.
Resumo:
This essay describes a new didactic approach, in according with the national curriculum guidelines for chemistry undergraduate courses in Brazil, employed during the one-semester course "Experimental General Chemistry" for chemistry undergraduate students at the Federal University of Piauí. The new approach has positively helped student's training by improving their reading skills and their understanding of scientific reports, by developing the use of electronic tools to search and to recover the required knowledge for their learning activities, and by improving their skills of understanding published texts and dealing with digital sources. At the same time the students are strongly stimulated to enter the research program for undergraduate students available at the University.
Resumo:
Quantitative GC-FID was evaluated for analysis of methylated copaiba oils, using trans-(-)-caryophyllene or methyl copalate as external standards. Analytical curves showed good linearity and reproducibility in terms of correlation coefficients (0.9992 and 0.996, respectively) and relative standard deviation (< 3%). Quantification of sesquiterpenes and diterpenic acids were performed with each standard, separately. When compared with the integrator response normalization, the standardization was statistically similar for the case of methyl copalate, but the response of trans-(-)-caryophyllene was statistically (P < 0.05) different. This method showed to be suitable for classification and quality control of commercial samples of the oils.
Resumo:
Pyro and hydrometallurgical processes were applied to the treatment of spent commercial zeolites (a molecular sieve and a ZSM-5 sample). Both catalysts were employed in pilot plant units. They were kept in their original shape, they were not regenerated and were not subjected neither to mechanical stress nor to overheating zones during their time on-stream. Two recycling processes were tested: (i) direct solubilization of samples in mixtures of HF + H2O2 (60 ºC, 1 h). Although silicon was solubilized, insoluble matter was found in both samples, particularly in the molecular sieve, due to its high amounts of alkaline and alkaline-earth metals; (ii) fusion with KHSO4 (5 h, 600 ºC) with KHSO4/zeolite mass ratio 6:1. After fusion the solid was solubilized in water (100 ºC), leaving silicon as SiO2 residue. In both processes, solubilized metals were isolated by conventional selective precipitation techniques. Analysis of final products by common analytical methods shows that metals present in the original catalysts were recovered with very high yields except when the molecular sieve was treated with HF + H2O2. This reactant mixture proved to be suitable for processing zeolites with a low alkaline and alkaline-earth metal content whereas fusion with KHSO4 appeared to be adequate for all types of zeolites.
Resumo:
In this paper we discuss the characteristics of experimental activities described by teachers and students in a teaching credentials course in Chemistry. The research pointed out a set of characteristics that seem to favor the learning process: the bringing up of the student's knowledge; the mediation by peers; the dialogue to set out the student's knowledge; the debate; the validation of arguments; the discussion about the context. The authors argument that, because of the empirical view of Science present in Chemistry courses, the discussion about the nature of Science is important.
Resumo:
Until the present date, historians of science have described inaccurately the first laboratory created in Brazil for establishing and divulging Chemistry, namely the "Laboratório Químico-Prático do Rio de Janeiro". During recent research carried out in the Arquivo do Museu Imperial (Petrópolis, RJ), I localized a document entitled "Ensaio histórico analítico das operações do Laboratório Químico-Prático do Rio de Janeiro", which allowed me to gain the relevant information to correct some of the observations made in the first chronicles.
Resumo:
The private archive of the Brazilian Imperial Family holds a wealth of little known documents about the education of the daughters of Emperor D. Pedro II, especially of the eldest, Isabel, Princess Imperial. Science, particularly chemistry, for which her father had a particular fondness, occupied an important place in the girl's education. The study of these documents sheds a new light on the contrast between female education in the country in general, during most of the 19th century, and the careful upbringing envisaged by the Emperor for his future successor.
Resumo:
This paper describes total lipid content, unsaponifiable fraction and the acid, refractive, saponification and iodine indices of the oil of Sterculia striata nuts. The fatty acids, the sterols and the triterpene alcohols were determined. The percentage of cyclopropenoid fatty acids (CPFA), determined by NMR ¹H (15,5%), makes the nuts of this species unsuitable for human consumption.
Resumo:
Schizophrenia is a devastating psychiatric illness that affects 1-2% of the world population and continues as a challenge to neuroscience. In this work, we describe an account about the historical evolution of the dopaminergic hypothesis of schizophrenia discussing, from the medicinal chemistry point of view all different classes of antipsychotic drugs, emphasizing the rational design, structure activity relationships (SAR) and physico-chemical properties related with its molecular mechanism of action.
Resumo:
The discussion based on surfactant cleaning action is commonly used in chemistry classrooms for the comprehension of theoretical concepts related to surface tension and micelle formation. The experimental quantification of surface tension of aqueous solutions of surfactants provides the practical instruments for this discussion. The present paper describes a simplification on the common apparatus employed for the drop-weight method, making the determination of surface tension accessible to any chemistry lab. The surface tension of various liquids and the critical micelle concentration, CMC, of three commercial surfactants were measured with this modified method, and proved to be consistent with literature values.
Resumo:
Samples of copper compounds covering all of the XXth century and the end of the XIXth century were submitted to classical and instrumental quantitative analysis. The amount of impurities greatly decreased with time, reaching a constant level since the 1960's. The gravimetric method was suitable for the determination of copper although other procedures also gave good or reasonable results. However, for metal contaminants, atomic absorption spectrometry was the best choice because of its lower detection limits, being able to determine several elements in the oldest samples. Ion chromatography detected several anions in copper salts manufactured before the 1950's. An increasing quality of raw materials and a better sensitivity of analytical methods led to quality improvement of copper compounds with time.
Resumo:
This review begins with a brief discussion of the biological importance and chemical features of peptides. A description of the existing synthetic methods follows with emphasis on the basic aspects of the chemical and enzymatic syntheses. Techniques used to purify and characterize the synthesized peptides are also discussed. Finally, a few applications of the final products in chemistry, biochemistry, immunology and medicine are presented, such as identification and quantification of naturally occurring peptides, inspection of structure-activity relationships, therapeutics, development and/or improvement of analytical techniques and search for new vaccines.
Resumo:
The purpose of this paper is the development of simple strategies to teach basic concepts of atomic spectrometry. Metals present in samples found in the daily lives of students are determined by flame atomic emission spectrometry (FAES). FAES is an accurate, precise, and inexpensive analytical method often used for determining sodium, potassium, lithium, and calcium. Historical aspects and their contextualization for students are also presented and experiments with samples that do not require pre-treatment are described.