Sanitarismo e planejamento urbano: a trajetória das propostas urbanísticas para Natal entre 1935 e 1969

The Escritório Saturnino de Brito (Saturnino de Brito Office), created in 1920 under the sanitaristic guidance of the engineer Saturnino de Brito, has a vast record of works throughout the whole national territory, even after the death of its founder, in 1929 at which point his son, and also engineer, Saturnino de Brito Filho, assumed the head of the company , with a compromise to continue his father s work and assure his administrative, technical and urbanistic principles up until the early 1980s, when that institution came to an end. The scarcity of theorical studies about this Office, alongside the importance of the contributions it made in countless cities, oriented the focus of this study on its performance in Natal, where it remained from 1935 to 1969, designing, executing and managing sanitationist works and the services associated with them and going through several political, economical, social, cultural and urbanistic contexts periodicized in this work into three moments. Thus, it is intended to analyze how the Saturnino de Brito Office behaved and adapted itself to the conjunctural changes that unfolded into each of these moments, and more specifically, to observe the forms of intervention adopted the principles, the instruments and the scope aiming to verify the transition of the sanitaristic set of urbanistic ideas into the urban planning as a development strategy on a local level

Efetividade do flúor e da escovação e eficácia dos materiais de colagem ionômero de vidro e resina composta na reversão das microporosidades criadas pelo condicionamento ácido no esmalte dentário

The objectives of this clinical study was to evaluate the use of the toothpaste with fluoride and without fluoride and the daily tooth brushing are effective in the reversion of the dental enamel conditioned by acid. Another objective of this clinical study was to evaluate if the positioning of orthodontic accessories with glass ionomer cement helps in the reversion of the dental enamel conditioned by acid, when compared to composed resin. One hundred and twenty teeth were selected with indication of extraction by orthodontic reasons. The 30 volunteers were divided, randomly, in two groups. A group used toothpaste without fluoride and the other with it. The teeth of the sample were shuffled, in each volunteer. The teeth were conditioned by the 37% orthophosphoric acid. One of the conditioned teeth stayed in the mouth and suffered action of the abrasion for the tooth brushing, in another teeth a stainless steel mesh protection was positioned with glass ionomer cement, in another tooth the screen was glued with composed resin, in a fourth tooth (the control) was only conditioned after the extractions, 60 days later. All the teeth were appraised through DIAGNOdent, MEVA and EDS. In the obtained data it was possible to observe that there were not statistic significant differences in any comparison, even in the group that did not have access to the fluoride in the toothpaste as in the other that had. According with the used methodology, it was possible to observe too that there was not statistic significant differences in any comparison, even in the group that had the stainless steel mesh positioned with glass ionomer cement as in the group that the stainless steel mesh was positioned with composed resin. However, it was observed that there was an improvement in the topography of the enamel in all the teeth. The accomplishment of this study was facilitated due to the participation of the researchers' of the health area (dentistry), materials engineer, physics and chemistry. The researchers were originating from the Federal University of Rio Grande do Norte and of the University of Queensland, in Australia. This interdisciplinary group was decisive in the accomplishment of the study. It can be concluded that the enamel tends to return to its initial aspect, even if the patient does not have access to fluoride. That is probably due the action of the abrasion for the tooth brushing and mastication. In spite of it not being significant, it is suggested that the conditioned enamel was more resistant to the abrasion in the group that had access to fluoride. It was also possible to conclude that the fluoride liberated by the glass ionomer was not enough to provide a significant difference in the enamel conditioned by the acid, when compared with the composed resin, even in the group that did not use fluoride in the toothpaste as in the group that used

Pelos caminhos das idéias e da existência: a propósito das cartografias de J. T. de Moura Filho

The present study aimed to investigate the intellectual, personal and professional tracjetory of José Tavares de Moura Filho. Civil engineer who devoted him self to cartographic cience, though not a cartographer, and to literature. At 65 years old, already with retirement, he devoted his attention to writing his books and see the world, as he said. There were nine books, five of poetry, prose and short stories, and four of cartographic nature. The published his books independently. He wrote and his wife Elza typed. Once ready, he would seek the graphics, later a publisher, to reproduce his writing. He liked to say he would rather to pay for your books than bay a new car, and did so. Died at age of 82 years, leaving a rich material for the young students, those who read, as he always did by dedicating his books. In order to achieve the objectives of this study, we used as a theoretical some authors dealing with historiography, oral history, intellectual intineraries and history of ideas, as Garnica, Nóvoa, Barros, Bosi, Le Goff among others. From this perspective, we constructed an archeology of ideas and the existence of Moura Filho, to point contributions of the teaching of mathematics from his work

O desenvolvimento da docência nas engenharias: um estudo na universidade federal de campina grande (UFCG)

This research has the objective of studying the teacher-engineers awareness regarding their teaching practice of courses Civil, Electrical and Materials at the Federal University of Campina Grande. It presents and analyses major themes concerning the teaching work. At the same time, it pinpoints the need to develop good teaching practice in higher education. The study is based on the concepts of bricolage (KINCHELOE; BERRY, 2007) and multi-referentiality (ARDOINO, 1998). The Case Study procedure was adopted as an investigation strategy (YIN, 2004; AFONSO, 2005). The data collection was done through the application of questionnaires based on the teacher education paradigms (ZEICHNER, 1983; SACRISTAN, 1998; ALTET, 2001; BRÜTTEN, 2008). The theoretical background for the thematic axis is oriented by reflections on university teaching (MASETTO, 2003; 2007; ZABALZA, 2004; CUNHA et al, 2005; GRILLO, 2008; PIMENTA; ANASTASIOU, 2010 ); on Engineering teaching (BAZZO, 2001; MASETTO, 2009) and on the present-day relationship between educational policies and higher education (MENEZES, 2001; SANTOS, 1995;2005; BOSI, 2007). The data analysis was done by means of a quantitative and qualitative approach (SAMPIERI; COLLADO; LUCIO, 2006), allow us to understand how the teachers surveyed live their professional activity. The results make it possible to generalize that the teacher-engineers give value to research as part of their teacher education and they view the university pedagogy as an important aspect to improve their practice. A considerable number of them is interested in being part of reflection groups, aiming to enhance teaching at higher education. The teacher-engineers dedicate themselves to university teaching without sharing their experience with other teachers, consolidating a present tendency seen in the international and national literature. They tend to apply a pedagogy originated from their daily teaching practice, because they believe that teaching is perfected through practice, though they admit that practice alone is not sufficient for professional development. In the view of most informants, good teaching requires willingness, along with the political element, the mastery of the lesson contents and familiarity with the discipline objectives, if we regard teachers as advisors in the educational process. Throughout the teaching process, the teachers use diversified pedagogical strategies, such as contextualization and exemplification of the lesson contents, epistemological basis in the scientific field, and group work. They do not share any bond of relationship between them and the students, though they consider it important. In general terms, they lack preparation for university teaching and no involvement or interest in institutional issues, by supporting and improving the teaching quality

Gestão ambiental na indústria do petróleo : fatores associados ao comportamento pró-ambiental de empregados de uma empresa brasileira de óleo e gás

This survey develops a study about the pro-environment behavior of a brazilian company of oil and gas sector, emphazing the Petróleo Brasileiro S/A PETROBRAS in its Unit of Business of Exploration and Production in the State of Rio Grande do Norte and Ceará − UN-RNCE. The work s development adopt the bibliographic research methodology with the descriptive exploratory analisys, with the purpouse of identifying related points with the knowledge and the analysed enterprise s staff conduct, by the aplication of the interview with a instrument of data colecting with closed variable questions from answers that varies from o to 10.The answers allowed us to know the employees knowledge about the related aspects of environmental responsability, knowing also the involvement of the employees with the politics of environmental managment that has been implemented in the operating area of the company. The research led us to an important verification of the pro-environmental behavior of the people interviewed. The results depends of a wise acting, not only inside the company, but also outside, where the results of this acting will be more perceived for the society. Finally, we conclude that the company has a politics of management with a great importance, emphasinzing that the employees are been in constant training about their behavior resulting in satisfaction

Coordenador gestor, coordenador pedagógico ou coordenador empreendedor: análise do perfil de coordenadores de curso em IES privada

This dissertation aims to identify the profile of the course coordinators of the Estacio/Natal Group Units , toward an understanding of the factors that can improve the relationship of this person within the HEIs surveyed , with students , teachers , directors . Seeks to understand the entrepreneurial and strategic actions in offering quality higher education . At first , a literature search , with the purpose of collecting issues related to theme , focusing on the concepts and landscapes through which they come to higher education was conducted , the course coordinator and entrepreneur profile. The research approach is quantitative . As for goals is descriptive exploratory , by providing greater understanding of the phenomenon investigated and understand the relationships among the concepts involved in the issue studied . A survey of data was done through personal interview , since this method allows the study of questions based on organizational and managerial field. The object of investigation are all the course coordinators of the four units of Estacio / Natal Group . The research instrument consisted of 13 closed questions to identify the profile of the engineer, 17 questions with Likert scale of 5 points for identifying the entrepreneurial profile , 42 questions with Likert scale of 5 points which measured the dimensions of the activity coordinator , 4 open and optional questions that measured the difficulties and opportunities that impact the development of entrepreneurship in the management of courses . Was used as statistical method ( analysis) and descriptive statistics. We conclude that the information collected and knowledge gained can contribute to the HEIs surveyed overcome challenges , foster strategic innovation management courses focusing on the implementation of a new vision of the course coordinator , as a professional who balances skills management and pedagogical skills , and innovation through entrepreneurial skills

Desenvolvimento de um núcleo versátil e integrado de ferramentas CAD/CAE para a modelagem e simulação de peças mecânicas

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented

Production of active recombinant eIF5A: reconstitution in E.coli of eukaryotic hypusine modification of eIF5A by its coexpression with modifying enzymes

Eukaryotic translation initiation factor 5A (eIF5A) is the only cellular protein that contains the polyamine-modified lysine, hypusine [N(epsilon)-(4-amino-2-hydroxybutyl)lysine]. Hypusine occurs only in eukaryotes and certain archaea, but not in eubacteria. It is formed post-translationally by two consecutive enzymatic reactions catalyzed by deoxyhypusine synthase (DHS) and deoxyhypusine hydroxylase (DOHH). Hypusine modification is essential for the activity of eIF5A and for eukaryotic cell proliferation. eIF5A binds to the ribosome and stimulates translation in a hypusine-dependent manner, but its mode of action in translation is not well understood. Since quantities of highly pure hypusine-modified eIF5A is desired for structural studies as well as for determination of its binding sites on the ribosome, we have used a polycistronic vector, pST39, to express eIF5A alone, or to co-express human eIF5A-1 with DHS or with both DHS and DOHH in Escherichia coli cells, to engineer recombinant proteins, unmodified eIF5A, deoxyhypusine- or hypusine-modified eIF5A. We have accomplished production of three different forms of recombinant eIF5A in high quantity and purity. The recombinant hypusine-modified eIF5A was as active in methionyl-puromycin synthesis as the native, eIF5A (hypusine form) purified from mammalian tissue. The recombinant eIF5A proteins will be useful tools in future structure/function and the mechanism studies in translation.

Uma abordagem na camada de middleware para troca dinâmica de componentes em sistemas multimídia distribuídos baseados no framework Cosmos

To manage the complexity associated with the management of multimedia distributed systems, a solution must incorporate concepts of middleware in order to hide specific hardware and operating systems aspects. Applications in these systems can be implemented in different types of platforms, and the components of these systems must interact each with the other. Because of the variability of the state of the platforms implementation, a flexible approach should allow dynamic substitution of components in order to ensure the level of QoS of the running application . In this context, this work presents an approach in the layer of middleware that we are proposing for supporting dynamic substitution of components in the context the Cosmos framework , starting with the choice of target component, rising taking the decision, which, among components candidates will be chosen and concluding with the process defined for the exchange. The approach was defined considering the Cosmos QoS model and how it deals with dynamic reconfiguration

Model-Driven requirements engineering process aided by ontologies and natural controlled languages

Researches in Requirements Engineering have been growing in the latest few years. Researchers are concerned with a set of open issues such as: communication between several user profiles involved in software engineering; scope definition; volatility and traceability issues. To cope with these issues a set of works are concentrated in (i) defining processes to collect client s specifications in order to solve scope issues; (ii) defining models to represent requirements to address communication and traceability issues; and (iii) working on mechanisms and processes to be applied to requirements modeling in order to facilitate requirements evolution and maintenance, addressing volatility and traceability issues. We propose an iterative Model-Driven process to solve these issues, based on a double layered CIM to communicate requirements related knowledge to a wider amount of stakeholders. We also present a tool to help requirements engineer through the RE process. Finally we present a case study to illustrate the process and tool s benefits and usage

Sistema especialista fuzzy para dimensionamento de bombeio mecânico

Despite the emergence of other forms of artificial lift, sucker rod pumping systems remains hegemonic because of its flexibility of operation and lower investment cost compared to other lifting techniques developed. A successful rod pumping sizing necessarily passes through the supply of estimated flow and the controlled wear of pumping equipment used in the mounted configuration. However, the mediation of these elements is particularly challenging, especially for most designers dealing with this work, which still lack the experience needed to get good projects pumping in time. Even with the existence of various computer applications on the market in order to facilitate this task, they must face a grueling process of trial and error until you get the most appropriate combination of equipment for installation in the well. This thesis proposes the creation of an expert system in the design of sucker rod pumping systems. Its mission is to guide a petroleum engineer in the task of selecting a range of equipment appropriate to the context provided by the characteristics of the oil that will be raised to the surface. Features such as the level of gas separation, presence of corrosive elements, possibility of production of sand and waxing are taken into account in selecting the pumping unit, sucker-rod strings and subsurface pump and their operation mode. It is able to approximate the inferente process in the way of human reasoning, which leads to results closer to those obtained by a specialist. For this, their production rules were based on the theory of fuzzy sets, able to model vague concepts typically present in human reasoning. The calculations of operating parameters of the pumping system are made by the API RP 11L method. Based on information input, the system is able to return to the user a set of pumping configurations that meet a given design flow, but without subjecting the selected equipment to an effort beyond that which can bear

BMMobile: uma linha de produtos para dimensionamento de bombeio mecânico em dispositivos móveis

With the increase of processing ability, storage and several kinds of communication existing such as Bluetooth, infrared, wireless networks, etc.., mobile devices are no longer only devices with specific function and have become tools with various functionalities. In the business field, the benefits that these kinds of devices can offer are considerable, because the portability allows tasks that previously could only be performed within the work environment, can be performed anywhere. In the context of oil exploration companies, mobile applications allow quick actions could be taken by petroleum engineers and technicians, using their mobile devices to avoid potential catastrophes like an unexpected stop or break of important equipment. In general, the configuration of equipment for oil extraction is performed on the work environment using computer systems in desktop platforms. After the obtained configuration, an employee goes to equipment to be configured and perform the modifications obtained on the use desktop system. This management process equipment for oil extraction takes long time and does not guarantee the maintenance in time to avoid problems. With the use of mobile devices, management and maintenance of equipment for oil extraction can be performed in a more agile time once it enables the engineer or technician oil can perform this configuration at the time and place where the request comes for example, near in the oil well where the equipment is located. The wide variety of mobile devices creates a big difficulty in developing mobile applications, since for one application can function in several types of devices, the application must be changed for each specific type of device, which makes the development quite costly. This paper defines and implements a software product line for designing sucker-rod pumping systems on mobile devices. This product line of software, called BMMobile, aims to produce products that are capable of performing calculations to determine the possible configurations for the equipment in the design suckerrod pumping, and managing the variabilities of the various products that can be generated. Besides, this work performs two evaluations. The first evaluation will verify the consistency of the products produced by the software product line. The second evaluation will verify the reuse of some products generated by SPL developed

A redefinição do espaço urbano de Natal/RN a partir da influência dos serviços: uma análise das avenidas Bernardo Vieira e Engenheiro Roberto Freire

This paper analyzes the influence of trade and services in the reconfiguration of urban space in Natal, with the Avenues Bernardo Vieira end Roberto Freire Engineer as privileged analysis. Initially, we discussed the concepts of production and reproduction of urban space, urban centralities, decentralized, services and public policies, especially transport and tourism. Then, we show the construction of urban space from Natal, highlighting the historical formation of the districts of Ribeira, Cidade Alta and Alecrim, pioneers in the service sector, noting that currently there is an ongoing process of decentralization in the city of such activities, to other areas of the urban fabric of Natal. Later, we studied the Avenues Bernardo Vieira to Roberto Freire Engineer, noting, in both the distribution of commercial activities and services, and issues related to transportation, traffic, tourism and socio-economic problems, identified them. Finally, testify that Natal, from the 1980s, underwent a process of decentralization of services, both to the south, and north of the city on the ball. In this process of decentralization we ascertain the role of public policies on transport and tourism, complementing the action of private enterprise, through the real estate market, on Avenue Roberto Freire Engineer.

O uso do território pelos serviços privados de saúde em Natal/RN

Nowadays we can observe in Natal city, the development of the structure and the health s private service. However, the spatial distribution of these services will be marked by an uneven distribution on the places, what will be in according with the conditions offered by the same in each historical period. Accordingly, the objective of this job is analyze the use of the territory by the health s private service and the dynamics that promotes in Natal city in the technical scientific information period. Thus, seeking to search this goal, realized literature, documentary, empirical, considering the process of development and the spatial distribution of the health s private service in the city. From a topology we can observe that prevails in the city a service s concentration at all levels of complexity in only a few neighborhoods, being Tirol and Petrópolis, which are neighborhoods that have high densities of engineer system, bigger fluidity, and the best level salaries of the city, which present a greater number of these establishments. However, equal this concentration has occurred a dispersion of these services to other neighborhoods, as for example Lagoa Nova which is presenting the same attractiveness in the view of attributes territorial, begins to protect services presenting the same profile like the firsts. However, the city has a significant demand to this kind of service found in these neighborhoods, some events provided the emergency of another type of market of health s private service, that are those created to attend guests with a lower purchasing power, which will have their establishments in the same way selectively distributed in some areas of the city, which will not be the same pursued by the other, showing how selective is the installation of an enterprise guide by the logic of capitalism reproduction. So, the imperative of spatial selectivity presented by the health s private sector exposes an use of the differential territory for these services

Dental students' knowledge of ergonomic postural requirements and their application during clinical care

Aim:To examine how much final-year undergraduate dental students know about postural dental ergonomic requirements, and how well they apply these requirements clinically.Background:Dentists are vulnerable to diverse mechanical (e.g. postural) and non-mechanical occupational risks.Materials and Methods:Eight postural requirements found in normalising documents were identified, reproduced, photographed, and analysed to develop a test of visual perception (TVP). Photographs of the 69 participating students were taken during their clinical care to ascertain ergonomics compliance, after which the students were administered the TVP. Pearson's test was used to correlate the level of knowledge (TVP) and its clinical application (photographic analysis) among the 552 observations made for each test (total of 1104 observations).Results:65.7% of the TVP questions were answered correctly and 35% of the photographic cases were in compliance with ergonomic requirements (+ 0.67, P < 0.0001).Conclusion:The knowledge of ergonomics postural requirements and their clinical application among the dental students surveyed were not satisfactory. The reasons for the learning difficulties encountered by the students should be identified to improve the learning process. The didactic use of digital images in this study may help in this endeavour.