Influência de software de otimização de corte no rendimento de serraria da região sudoeste paulista

This study aimed to analyze the increase of yield provided by a software optimization cutting in a pine sawmill, located at southwest region of São Paulo, city of Itapeva. First were measured 10 logs that were processed by conventional sawing system by measuring the volume of products in the process output. Then using a cutting optimization software, that generated cuts diagrams, 10 logs, from 25 to 26 cm diametrical class, were processed by sawing system optimized. For the conventional sawing, the value found to yield was 41.80%, whereas for the unfolding optimized showed the value of 61.79%, resulting in a difference of 19.99%. This study shows that there is room for significant improvement of performance in sawmills sawing with the use of optimization software as the employee at work

Aplicação de métodos computacionais no estudo das fases intermetálicas ordenadas pt-sn

Fuel cells are a very promising solution to the problems of power generation and emission of pollutant to the environment, excellent to be used in stationary application and mobile application too. The high cost of production of these devices, mainly due to the use of noble metals as anode, is a major obstacle to massive production and deployment of this technology, however the use of intermetallic phases of platinum combined with other metals less noble has been evaluated as electrodes in order to minimize production costs and still being able to significantly improve the catalytic performance of the anode. The study of intermetallic phases, exclusively done by experimental techniques is not complete and demand that other methods need to be applied to a deeper understanding of the behavior geometric properties and the electronic structure of the material, to this end the use of computer simulation methods, which have proved appropriate for a broader understanding of the geometric and electronic properties of the materials involved, so far not so well understood.. The use of computational methods provides answers to explain the behavior of the materials and allows assessing whether the intermetallic may be a good electrode. In this research project was used the Quantum-ESPRESSO package, based on the DFT theory, which provides the self-consistent field calculations with great precision, calculations of the periodic systems interatomic force, and other post-processing calculations that points to a knowledge of the geometric and electronic properties of materials, which may be related to other properties of them, even the electrocatalytic. The electronic structure is determined from the optimized geometric structure of materials by analyzing the density of states (DOS) projected onto atomic orbital, which determines the influence of the electrocatalytic properties of the material... (Complete abstract click electronic access below)

Uso do modelo de simulação 'ABC 6' para avaliação de áreas sujeitas à ocorrência de ondas de cheia e corridas de massa/detritos: estudo de caso na bacia do Ribeirão da Prata (SP)

Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...

Projeto de exploração de mercado e desenvolvimento de novos conceitos para segmento cosmético brasileiro: aplicação e avaliação de métodos de pesquisa

The current growth of the cosmetic Brazilian market and the incessant search for innovations requires the company´s Research & Development departments to be efficient and assertive. Therefore this work aimed to approach the process of development of new concepts, since the market exploration using quantitative tools, Survey, until the concept creation by qualitative tools. As results of this project an analysis of the tools and guidelines used nowadays and the creation of new exploration methods were delivered

Comparação de métodos de dimensionamento de muros em solo reforçado através de programas computacionais

Dans ces dernières années, plusieurs méthodes de dimensionnement d'ouvrages de soutènement en sol renforcé ont été développés, mais la doute c’est où l'utilisation de chacun d'eux se révèle plus avantageux? Ce travail a été conçu avec l'objectif de faire une étude d’un cas historiques d'un mur en remblais renforcé avec parement végétal de 27,6 mètres de haut, dont la conception a été analysé en utilisant une méthode de calcul et des logiciels informatiques spécifiques à l’utilisation dans le domaine géotechnique. Avec cette étudesont attendus de résultats capable de présenter les principales caractéristiques de chaque méthode et où il peut le mieux être appliquée

As atividades experimentais no ensino de física

This work was developed from a literature search in order to provide teachers of physics theoretical and methodological requirements for the use of experimentation in physics teaching, with the aim of contributing to the teaching practice of these teachers and, consequently, for improving teaching this discipline. Therefore, to deal in the course of this research, the goals and types of practical activities, new information and communication technologies that fit the experimental approaches and the role of the teacher in this context, specifying the variables that influence and relate with experimental activities. Studies are presented on the methodology and planning of experimental activities to draw attention to the teacher and the important issues relevant to the preparation of these activities as, for example, the proposed objectives and types of discourse and existing approaches for the conduct of practical activities. In this sense, the trend is highlighted for walks where the approach of practical activities, within the context of practices interactionist and are pointed out strengths and weaknesses of different types of activities presented. We also highlight aspects of the learning process associated with some theoretical reference that are on that subject, as Piaget, Vigotski and Ausubel, so that the teacher can apply the concepts in their theories worked in the practical lessons of physics

Desenvolvimento de software para exibição de exames de eletrocardiograma

The main objective is to create a software, using C++ language, for reading and exhibiting in a graphic an Electrocardiogram (ECG) wave. The data is recorded as a FM modulated signal and compressed using Adaptive Differential Pulse Code Modulation (ADPCM). The signal have this characteristics because it was acquired using an experimental equipment, this equipment is the result of research made by the professor who supervised this work. FM demodulation techniques in discrete time, discrete filters and digital signal processing are some of the topics that can be found in this essay. Some concepts about the human heart and about ECG waves are also briefly introduced. These concepts are necessary for understanding the final evaluation of the software performance. The development is partly made using MATLAB. Most of the functions that are used on the software are first tested and designed in MATLAB environment. In the end, an evaluation is done comparing the results that are expected with the ones that MATLAB presents and the ones that the developed software presents

Aplicando Métodos de Mineração Visual de Texto em conteúdo de Fórum de Discussão

We are included in a society where the use of the Internet became very important to our everyday life. The relationships nowadays usually happen through technological devices instead of face to face contact, for instance, Internet forums where people can discuss online. However, the global analysis is a big challenge, due to the large amount of data. This work investigates the use of visual representations to support an exploratory analysis of contents in messages from discussions forums. This analysis considers the thematic and the chronology. The target forums refer to the educational area and the analysis happens manually, i.e. by direct reading message-by-message. The proprieties of perception and cognition of the human visual system allow a person the capacity to conduct high-level tasks in information extraction from a graphical or visual representation of data. Therefore, this work was based on Visual Analytics, an area that aims create techniques that amplify these human abilities. For that reason we used software that creates a visualization of data from a forum. This software allows a forum content analysis. But, during the work, we identified the necessity to create a new tool to clean the data, because the data had a lot of unnecessary information. After cleaning the data we created a new visualization and held an analysis seeking a new knowledge. In the end we compared the new visualization with the manual analysis that had been made. Analyzing the results, it was evident the potential of visualization use, it provides a better correlation between the information, enabling the acquisition of new knowledge that was not identified in the initial analysis, providing a better use of the forum content

Valoração ambiental: síntese dos principais métodos

This study aims to show some methods of environmental assets valuation. These methods are intended to assist in the economic value estimation to environmental resources by the simulation of a hypothetical market, even if there are no market prices related to them. It is about an individual preference measure against the environmental changes. Thus, the environmental valuation methods do not convert a natural resource into a market product. The present report evaluates the applicability of the valuation methods to determine the economic value for assets or resources. The challenge for all is to understand the current economic and ecologic thinking and their limitations, so as to seek improvements in the perception of natural phenomena and in the economic-oriented goal, which is the sustainable development.

Estudo de uma ponte rolante comercial no transportede bobina de aço de 12 toneladas

This work aims to determine the stresses acting on the main beam of a crane to transport steel coils of up to twelve tons. To determine the stress it was made a revision of the knowledge of the mechanics of materials to apply the analytical method. Following a review of the finite element method is made to understand the same. To complete the study it was used the commercial software ANSYS to determine the stresses by finite element method, the program provides images that help to better understand the results obtained. With the results a comparison of the values of the tensions between the two methods (analytical and finite element) was made. To assist in the calculations it was used the NBR 8400, 1984 (Calculation of Lifting Equipment Load)

O uso de atividades experimentais de demonstração para a aprendizagem de eletromagnetismo

This research aimed to verify if the use of experimental demonstration activities through an approach that employed discursive patterns that provided social interaction in the classroom, provided the students motivation to participate in activities and learn the worked contents. The students of this research were twenty four in a Guaratinguetá's school, aged between 19 and 24 years. The instruments of analysis were transcripts of conversations that occurred between student / teacher and student / student and also the studes s answers to a evaluative questionnaire. In order to support this analysis, we used the Vygotsky Social Historical theory . The results showed that the use of demonstration activities, following an approach that used discursive patterns that enabled the social interaction between teacher and students and among students, motivated students to learn the worked contents

Avaliação da influência do substrato utilizado na qualidade e quantidade das parcelas de água escoada, percolada e armazenada em três estruturas experimentais de telhado verde extensino

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determinação da freqüência natural de eixos utilizando o software excel

This work aims to determine the first natural frequency of rotation shaft by using a basic software, Excel, and to compare it to the values obtained in laboratory. When an axle is submitted to a rotation, depending on the rotational frequency used, the axle can enter a state of resonance, in which the amplitude of vibration becomes rather high. The frequencies in which the resonance is observed depends on several parameters of the axle, including the number of concentrated masses associated to the axle. Thus, to obtain a computer program of easy use and access, which can preview the frequency of resonance of an axle in rotation with ‘n’ numbers of concentrated masses it has been studied how the frequency varies with each of these parameters. The computer program and the analyses have been made using the Rayleigh Method, which allowed the transformation of a continuous system to discrete through the theory of finite elements, which has proved that, the bigger the number of divisions of the shaft taken into consideration in the calculus of the natural frequency, the more this value gets close to the real value. The results obtained have been considered satisfactory once these have gotten close to the theoretical results expected

Previsão do comportamento de estruturas de contenção atirantadas utilizando o software FTOOL

Population growth, together with the gradual social ascent in Brazil, reflects at the growing need for better use of urban spaces. In this context, the amount of new buildings to meet the demand in property market, the needs for creating new roads and highways, among others, make the use of geotechnical works and, more specifically, retaining walls, more and more common. One of the simplest solutions for underground works is the use of retaining structures using tie back walls for soil support, therefore, the present work deals with this kind of structures. This paper proposes the use of FTOOL software testing in predicting deformations in tie back walls, by comparing simulations of the presented model to a real and measured deformation case in Guabirotuba Formation (PR). The results showed the importance of defining the parameters such as stiffness and curtain geometry, as well as the definition of representative loads acting on it. Also, it was pointed out that the passive response of the steel rods depends on the horizontal displacement of the wall. The study concluded that the program generates very representative results when compared to field data and seems to be a promising tool for tie back structures displacement predictions

Softwares livres e prototipagem rápida aplicados na engenharia

In modern industry we see a growing need for answers cheaper, accurate and quick to deliver solutions and products to be able to remain competitive. In this way the inclusion of open source software and Rapid Prototyping tools have proven very important to obtain the expected results. This work, through information gathering, analysis software and their applicability, search tools commercially available rapid prototyping will demonstrate the importance of these tools and will also present possible configurations for a space for rapid prototyping within the university, as a proposal to implement a rapid prototyping laboratory at the Faculdade de Engenharia de Guaratinguetá