Effect of reservoir tillage on rainwater harvesting and soil erosion control under a developed rainfall simulator.

Soil erosion is a serious environmental threat in the Mediterranean region due to torrential rainfalls, and it contributes to the degradation of agricultural land. Techniques such as rainwater harvesting may improve soil water storage and increase agricultural productivity, which could result in more effective land usage. Reservoir tillage is an effective system of harvesting rainwater, but it has not been scientifically evaluated like other tillage systems. Its suitability for the conditions in Spain has not been determined. To investigate and quantify water storage from reservoir tillage and how it could be adapted to improve infiltration of harvested rainwater, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to five rainfall intensities ranging from 36 to 112 mm h-1 for 3 to 101-year return period with uniformity coefficients between 83 and 94%. In order to assess the reservoir tillage method under surface slopes of 0, 5, and 10%, three soil scooping devices with identical volume were used to make depressions in the following forms: a) truncated square pyramid, b) triangular prism, and c) truncated cone. These depressions were compared to a control soil surface with no depression. For the loam soil used in this study, results show that reservoir tillage was able to reduce soil erosion and surface runoff and significantly increase infiltration. There was significant difference between the depressions and the control. Compared to the control, depression (a) reduced surface runoff by about 61% and the sediment yield concentration by about 79%.

Caracterización geoquímica orgánica de los materiales de la zona de Hontomín para almacenamiento de Co2

Ante la perspectiva del Cambio Global propiciado por la acción antrópica debido al vertido de CO2 a la atmósfera desde el inicio de la Era Industrial, el Protocolo de Kyoto (firmado en 1997), seguido de las tímidas propuestas derivadas de la Reunión de Copenhague, más acciones derivadas de la reunión de los ministros de medio ambiente en Sevilla, la acción de captura y secuestro del CO2inevitablemente generado por la industria pesada y la generación de energía ha ido adquiriendo un progresivo interés al estar la Península Ibérica constituida en más del 50% de su superficie por rocas sedimentarias susceptibles de constituir almacenamientos subterráneos. El objetivo fundamental de este proyecto fin de carrara, es determinar los cambios que se producen en los compuestos orgánicos de las posibles rocas almacén y sello de la zona de Páramos de la Lora en Burgos, (donde se pretende realizar el secuestro de CO2) después de la inyección de CO2 supercrítico en experimentos. Fundamentalmente, el estudio se centra en la familia de alcanos, cetonas y ácidos. Para ello se realizará una caracterización geoquímica orgánica de los materiales antes y después de haber inyectado CO2 a altas presiones (100 bar – 120 bar) y en las condiciones térmicas existentes a la profundidad del almacén (40º C - 50º C) durante períodos de tiempo variables, para lo que se empleará cámara hiperbárica del Grupo de Estudios Ambientales. Abstract In view Global Change led by the anthropic action due to the discharge of CO2 into the atmosphere since the start of the Indistrual Era, the Protocolo de Kyoto (signed in 1997), followed by the timid proposals arising from the Copenhague Meeting, more action arising of the meeting of the environment minister in Sevilla, the action of captura and sequestration of CO2 inevitably generated by heavy industry and the energy generation has acquired a progressive interest because de Península Ibérica is formed in more than fifty percent of the surface by sedimentary rock susceptible of provide underground storage. The objetive of this Project is determining the changes produced in organics compounds of potential reservoir rocks and seal rocks in Páramos de la Lora in Burgos, after injection supercritical CO2 in experiment. Fundamentally, the study focuses in the alcanos, cetonas and ácidos family. For this, a geochemical characterizacion will be performed in the materials before and after injection of high pressure CO2 (100bar-120bar) and in the existing termal conditions in the depth of the warehouse (40º C-50º C) for varying period of time, for what is used hyperbaric chamber environmental studies group.

El análogo natural de almacenamiento y escape de Co2 de la cuenca de Gañuelas-Mazarrón : implicaciones para el comportamiento y la seguridad de un almacenamiento de Co2 en estaso supercrítico

El aumento de la temperatura media de la Tierra durante el pasado siglo en casi 1 ºC; la subida del nivel medio del mar; la disminución del volumen de hielo y nieve terrestres; la fuerte variabilidad del clima y los episodios climáticos extremos que se vienen sucediendo durante las ultimas décadas; y el aumento de las epidemias y enfermedades infecciosas son solo algunas de las evidencias del cambio climático actual, causado, principalmente, por la acumulación de gases de efecto invernadero en la atmósfera por actividades antropogénicas. La problemática y preocupación creciente surgida a raíz de estos fenómenos, motivo que, en 1997, se adoptara el denominado “Protocolo de Kyoto” (Japón), por el que los países firmantes adoptaron diferentes medidas destinadas a controlar y reducir las emisiones de los citados gases. Entre estas medidas cabe destacar las tecnologías CAC, enfocadas a la captura, transporte y almacenamiento de CO2. En este contexto se aprobó, en octubre de 2008, el Proyecto Singular Estratégico “Tecnologías avanzadas de generación, captura y almacenamiento de CO2” (PSE-120000-2008-6), cofinanciado por el Ministerio de Ciencia e Innovación y el FEDER, el cual abordaba, en su Subproyecto “Almacenamiento Geológico de CO2” (PSS-120000-2008-31), el estudio detallado, entre otros, del Análogo Natural de Almacenamiento y Escape de CO2 de la cuenca de Ganuelas-Mazarrón (Murcia). Es precisamente en el marco de dicho Proyecto en el que se ha realizado este trabajo, cuyo objetivo final ha sido el de predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un Almacenamiento Geológico Profundo de CO2 (AGP-CO2), mediante el estudio integral del citado análogo natural. Este estudio ha comprendido: i) la contextualización geológica e hidrogeológica de la cuenca, así como la investigación geofísica de la misma; ii) la toma de muestras de aguas de algunos acuíferos seleccionados con el fin de realizar su estudio hidrogeoquímico e isotópico; iii) la caracterización mineralógica, petrográfica, geoquímica e isotópica de los travertinos precipitados a partir de las aguas de algunos de los sondeos de la cuenca; y iv) la medida y caracterización química e isotópica de los gases libres y disueltos detectados en la cuenca, con especial atención al CO2 y 222Rn. Esta información, desarrollada en capítulos independientes, ha permitido realizar un modelo conceptual de funcionamiento del sistema natural que constituye la cuenca de Ganuelas-Mazarrón, así como establecer las analogías entre este y un AGP-CO2, con posibles escapes naturales y/o antropogénicos. La aplicación de toda esta información ha servido, por un lado, para predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un AGP-CO2 y, por otro, proponer una metodología general aplicable al estudio de posibles emplazamientos de AGP-CO2 desde la perspectiva de los reservorios naturales de CO2. Los resultados más importantes indican que la cuenca de Ganuelas-Mazarrón se trata de una cubeta o fosa tectónica delimitada por fallas normales, con importantes saltos verticales, que hunden al substrato rocoso (Complejo Nevado-Filabride), y rellenas, generalmente, por materiales volcánicos-subvolcánicos ácidos. Además, esta cuenca se encuentra rellena por formaciones menos resistivas que son, de muro a techo, las margas miocenas, predominantes y casi exclusivas de la cuenca, y los conglomerados y gravas pliocuaternarias. El acuífero salino profundo y enriquecido en CO2, puesto de manifiesto por la xx exploración geotérmica realizada en dicha cuenca durante la década de los 80 y objeto principal de este estudio, se encuentra a techo de los materiales del Complejo Nevado-Filabride, a una profundidad que podría superar los 800 m, según los datos de la investigación mediante sondeos y geofísica. Por ello, no se descarta la posibilidad de que el CO2 se encuentre en estado supe critico, por lo que la citada cuenca reuniría las características principales de un almacenamiento geológico natural y profundo de CO2, o análogo natural de un AGP-CO2 en un acuífero salino profundo. La sobreexplotación de los acuíferos mas someros de la cuenca, con fines agrícolas, origino, por el descenso de sus niveles piezométricos y de la presión hidrostática, el ascenso de las aguas profundas, salinas y enriquecidas en CO2, las cuales son las responsables de la contaminación de dichos acuíferos. El estudio hidrogeoquímico de las aguas de los acuíferos investigados muestra una gran variedad de hidrofacies, incluso en aquellos de litología similar. La alta salinidad de estas aguas las hace inservibles tanto para el consumo humano como para fines agrícolas. Además, el carácter ligeramente ácido de la mayoría de estas aguas determina que tengan gran capacidad para disolver y transportar, hacia la superficie, elementos pesados y/o tóxicos, entre los que destaca el U, elemento abundante en las rocas volcánicas ácidas de la cuenca, con contenidos de hasta 14 ppm, y en forma de uraninita submicroscópica. El estudio isotópico ha permitido discernir el origen, entre otros, del C del DIC de las aguas (δ13C-DIC), explicándose como una mezcla de dos componentes principales: uno, procedente de la descomposición térmica de las calizas y mármoles del substrato y, otro, de origen edáfico, sin descartar una aportación menor de C de origen mantélico. El estudio de los travertinos que se están formando a la salida de las aguas de algunos sondeos, por la desgasificación rápida de CO2 y el consiguiente aumento de pH, ha permitido destacar este fenómeno, por analogía, como alerta de escapes de CO2 desde un AGP-CO2. El análisis de los gases disueltos y libres, con especial atención al CO2 y al 222Rn asociado, indican que el C del CO2, tanto disuelto como en fase libre, tiene un origen similar al del DIC, confirmándose la menor contribución de CO2 de origen mantélico, dada la relación R/Ra del He existente en estos gases. El 222Rn sería el generado por el decaimiento radiactivo del U, particularmente abundante en las rocas volcánicas de la cuenca, y/o por el 226Ra procedente del U o del existente en los yesos mesinienses de la cuenca. Además, el CO2 actúa como carrier del 222Rn, hecho evidenciado en las anomalías positivas de ambos gases a ~ 1 m de profundidad y relacionadas principalmente con perturbaciones naturales (fallas y contactos) y antropogénicas (sondeos). La signatura isotópica del C a partir del DIC, de los carbonatos (travertinos), y del CO2 disuelto y libre, sugiere que esta señal puede usarse como un excelente trazador de los escapes de CO2 desde un AGPCO2, en el cual se inyectara un CO2 procedente, generalmente, de la combustión de combustibles fósiles, con un δ13C(V-PDB) de ~ -30 ‰. Estos resultados han permitido construir un modelo conceptual de funcionamiento del sistema natural de la cuenca de Ganuelas-Mazarrón como análogo natural de un AGP-CO2, y establecer las relaciones entre ambos. Así, las analogías mas importantes, en cuanto a los elementos del sistema, serian la existencia de: i) un acuífero salino profundo enriquecido en CO2, que seria análoga a la formación almacén de un AGPxxi CO2; ii) una formación sedimentaria margosa que, con una potencia superior a 500 m, se correspondería con la formación sello de un AGP-CO2; y iii) acuíferos mas someros con aguas dulces y aptas para el consumo humano, rocas volcánicas ricas en U y fallas que se encuentran selladas por yesos y/o margas; elementos que también podrían concurrir en un emplazamiento de un AGP-CO2. Por otro lado, los procesos análogos mas importantes identificados serian: i) la inyección ascendente del CO2, que seria análoga a la inyección de CO2 de origen antropogénico, pero este con una signatura isotópica δ13C(V-PDB) de ~ -30 ‰; ii) la disolución de CO2 y 222Rn en las aguas del acuífero profundo, lo que seria análogo a la disolución de dichos gases en la formación almacén de un AGP-CO2; iii) la contaminación de los acuíferos mas someros por el ascenso de las aguas sobresaturadas en CO2, proceso que seria análogo a la contaminación que se produciría en los acuíferos existentes por encima de un AGP-CO2, siempre que este se perturbara natural (reactivación de fallas) o artificialmente (sondeos); iv) la desgasificación (CO2 y gases asociados, entre los que destaca el 222Rn) del acuífero salino profundo a través de sondeos, proceso análogo al que pudiera ocurrir en un AGP-CO2 perturbado; y v) la formación rápida de travertinos, proceso análogo indicativo de que el AGP-CO2 ha perdido su estanqueidad. La identificación de las analogías más importantes ha permitido, además, analizar y evaluar, de manera aproximada, el comportamiento y la seguridad, a corto, medio y largo plazo, de un AGP-CO2 emplazado en un contexto geológico similar al sistema natural estudiado. Para ello se ha seguido la metodología basada en el análisis e identificación de los FEPs (Features, Events and Processes), los cuales se han combinado entre sí para generar y analizar diferentes escenarios de evolución del sistema (scenario analysis). Estos escenarios de evolución identificados en el sistema natural perturbado, relacionados con la perforación de sondeos, sobreexplotación de acuíferos, precipitación rápida de travertinos, etc., serian análogos a los que podrían ocurrir en un AGP-CO2 que también fuera perturbado antropogénicamente, por lo que resulta totalmente necesario evitar la perturbación artificial de la formación sello del AGPCO2. Por último, con toda la información obtenida se ha propuesto una metodología de estudio que pueda aplicarse al estudio de posibles emplazamientos de un AGP-CO2 desde la perspectiva de los reservorios naturales de CO2, sean estancos o no. Esta metodología comprende varias fases de estudio, que comprendería la caracterización geológico-estructural del sitio y de sus componentes (agua, roca y gases), la identificación de las analogías entre un sistema natural de almacenamiento de CO2 y un modelo conceptual de un AGP-CO2, y el establecimiento de las implicaciones para el comportamiento y la seguridad de un AGP-CO2. ABSTRACT The accumulation of the anthropogenic greenhouse gases in the atmosphere is the main responsible for: i) the increase in the average temperature of the Earth over the past century by almost 1 °C; ii) the rise in the mean sea level; iii) the drop of the ice volume and terrestrial snow; iv) the strong climate variability and extreme weather events that have been happening over the last decades; and v) the spread of epidemics and infectious diseases. All of these events are just some of the evidence of current climate change. The problems and growing concern related to these phenomena, prompted the adoption of the so-called "Kyoto Protocol" (Japan) in 1997, in which the signatory countries established different measurements to control and reduce the emissions of the greenhouse gases. These measurements include the CCS technologies, focused on the capture, transport and storage of CO2. Within this context, it was approved, in October 2008, the Strategic Singular Project "Tecnologías avanzadas de generación, captura y almacenamiento de CO2" (PSE-120000-2008-6), supported by the Ministry of Science and Innovation and the FEDER funds. This Project, by means of the Subproject "Geological Storage of CO2" (PSS- 120000-2008-31), was focused on the detailed study of the Natural Analogue of CO2 Storage and Leakage located in the Ganuelas-Mazarron Tertiary basin (Murcia), among other Spanish Natural Analogues. This research work has been performed in the framework of this Subproject, being its final objective to predict the behaviour and evaluate the safety, at short, medium and long-term, of a CO2 Deep Geological Storage (CO2-DGS) by means of a comprehensive study of the abovementioned Natural Analogue. This study comprises: i) the geological and hydrogeological context of the basin and its geophysical research; ii) the water sampling of the selected aquifers to establish their hydrogeochemical and isotopic features; iii) the mineralogical, petrographic, geochemical and isotopic characterisation of the travertines formed from upwelling groundwater of several hydrogeological and geothermal wells; and iv) the measurement of the free and dissolved gases detected in the basin, as well as their chemical and isotopic characterisation, mainly regarding CO2 and 222Rn. This information, summarised in separate chapters in the text, has enabled to build a conceptual model of the studied natural system and to establish the analogies between both the studied natural system and a CO2-DGS, with possible natural and/or anthropogenic escapes. All this information has served, firstly, to predict the behaviour and to evaluate the safety, at short, medium and long-term, of a CO2-DGS and, secondly, to propose a general methodology to study suitable sites for a CO2-DGS, taking into account the lessons learned from this CO2 natural reservoir. The main results indicate that the Ganuelas-Mazarron basin is a graben bounded by normal faults with significant vertical movements, which move down the metamorphic substrate (Nevado-Filabride Complex), and filled with acid volcanic-subvolcanic rocks. Furthermore, this basin is filled with two sedimentary formations: i) the Miocene marls, which are predominant and almost exclusive in the basin; xxiv and ii) the Plio-Quaternary conglomerates and gravels. A deep saline CO2-rich aquifer was evidenced in this basin as a result of the geothermal exploration wells performed during the 80s, located just at the top of the Nevado-Filabride Complex and at a depth that could exceed 800 m, according to the geophysical exploration performed. This saline CO2-rich aquifer is precisely the main object of this study. Therefore, it is not discarded the possibility that the CO2 in this aquifer be in supercritical state. Consequently, the aforementioned basin gathers the main characteristics of a natural and deep CO2 geological storage, or natural analogue of a CO2-DGS in a deep saline aquifer. The overexploitation of the shallow aquifers in this basin for agriculture purposes caused the drop of the groundwater levels and hydrostatic pressures, and, as a result, the ascent of the deep saline and CO2-rich groundwater, which is the responsible for the contamination of the shallow and fresh aquifers. The hydrogeochemical features of groundwater from the investigated aquifers show the presence of very different hydrofacies, even in those with similar lithology. The high salinity of this groundwater prevents the human and agricultural uses. In addition, the slightly acidic character of most of these waters determines their capacity to dissolve and transport towards the surface heavy and/or toxic elements, among which U is highlighted. This element is abundant in the acidic volcanic rocks of the basin, with concentrations up to 14 ppm, mainly as sub-microscopic uraninite crystals. The isotopic study of this groundwater, particularly the isotopic signature of C from DIC (δ13C-DIC), suggests that dissolved C can be explained considering a mixture of C from two main different sources: i) from the thermal decomposition of limestones and marbles forming the substrate; and ii) from edaphic origin. However, a minor contribution of C from mantle degassing cannot be discarded. The study of travertines being formed from upwelling groundwater of several hydrogeological and geothermal wells, as a result of the fast CO2 degassing and the pH increase, has allowed highlighting this phenomenon, by analogy, as an alert for the CO2 leakages from a CO2-DGS. The analysis of the dissolved and free gases, with special attention to CO2 and 222Rn, indicates that the C from the dissolved and free CO2 has a similar origin to that of the DIC. The R/Ra ratio of He corroborates the minor contribution of CO2 from the mantle degassing. Furthermore, 222Rn is generated by the radioactive decay of U, particularly abundant in the volcanic rocks of the basin, and/or by 226Ra from the U or from the Messinian gypsum in the basin. Moreover, CO2 acts as a carrier of the 222Rn, a fact evidenced by the positive anomalies of both gases at ~ 1 m depth and mainly related to natural (faults and contacts) and anthropogenic (wells) perturbations. The isotopic signature of C from DIC, carbonates (travertines), and dissolved and free CO2, suggests that this parameter can be used as an excellent tracer of CO2 escapes from a CO2-DGS, in which CO2 usually from the combustion of fossil fuels, with δ13C(V-PDB) of ~ -30 ‰, will be injected. All of these results have allowed to build a conceptual model of the behaviour of the natural system studied as a natural analogue of a CO2-DGS, as well as to establish the relationships between both natural xxv and artificial systems. Thus, the most important analogies, regarding the elements of the system, would be the presence of: i) a deep saline CO2-rich aquifer, which would be analogous to the storage formation of a CO2-DGS; ii) a marly sedimentary formation with a thickness greater than 500 m, which would correspond to the sealing formation of a CO2-DGS; and iii) shallow aquifers with fresh waters suitable for human consumption, U-rich volcanic rocks, and faults that are sealed by gypsums and/or marls; geological elements that could also be present in a CO2-DGS. On the other hand, the most important analogous processes identified are: i) the upward injection of CO2, which would be analogous to the downward injection of the anthropogenic CO2, this last with a δ13C(V-PDB) of ~ -30 ‰; ii) the dissolution of CO2 and 222Rn in groundwater of the deep aquifer, which would be analogous to the dissolution of these gases in the storage formation of a CO2-DGS; iii) the contamination of the shallow aquifers by the uprising of CO2-oversaturated groundwater, an analogous process to the contamination that would occur in shallow aquifers located above a CO2-DGS, whenever it was naturally (reactivation of faults) or artificially (wells) perturbed; iv) the degassing (CO2 and associated gases, among which 222Rn is remarkable) of the deep saline aquifer through wells, process which could be similar in a perturbed CO2- DGS; v) the rapid formation of travertines, indicating that the CO2-DGS has lost its seal capacity. The identification of the most important analogies has also allowed analysing and evaluating, approximately, the behaviour and safety in the short, medium and long term, of a CO2-DGS hosted in a similar geological context of the natural system studied. For that, it has been followed the methodology based on the analysis and identification of FEPs (Features, Events and Processes) that have been combined together in order to generate and analyse different scenarios of the system evolution (scenario analysis). These identified scenarios in the perturbed natural system, related to boreholes, overexploitation of aquifers, rapid precipitation of travertines, etc., would be similar to those that might occur in a CO2-DGS anthropogenically perturbed, so that it is absolutely necessary to avoid the artificial perturbation of the seal formation of a CO2-DGS. Finally, a useful methodology for the study of possible sites for a CO2-DGS is suggested based on the information obtained from this investigation, taking into account the lessons learned from this CO2 natural reservoir. This methodology comprises several phases of study, including the geological and structural characterisation of the site and its components (water, rock and gases), the identification of the analogies between a CO2 storage natural system and a conceptual model of a CO2-DGS, and the implications regarding the behaviour and safety of a CO2-DGS.

Effect of reservoir tillage on rainwater havesting and soil erosion control under a developed rainfall simulator

Soil erosion is a serious environmental threat in the Mediterranean region due to torrential rainfalls, and it contributes to the degradation of agricultural land. Techniques such as rainwater harvesting may improve soil water storage and increase agricultural productivity, which could result in more effective land usage. Reservoir tillage is an effective system of harvesting rainwater, but it has not been scientifically evaluated like other tillage systems. Its suitability for the conditions in Spain has not been determined. To investigate and quantify water storage from reservoir tillage and how it could be adapted to improve infiltration of harvested rainwater, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to five rainfall intensities ranging from 36 to 112 mm h− 1 for 3 to 101-year return period with uniformity coefficients between 83 and 94%. In order to assess the reservoir tillage method under surface slopes of 0, 5, and 10%, three soil scooping devices with identical volume were used to make depressions in the following forms: a) truncated square pyramid, b) triangular prism, and c) truncated cone. These depressions were compared to a control soil surface with no depression. For the loam soil used in this study, results show that reservoir tillage was able to reduce soil erosion and surface runoff and significantly increase infiltration. There was significant difference between the depressions and the control. Compared to the control, depression (a) reduced surface runoff by about 61% and the sediment yield concentration by about 79%.

An integrated modeling approach to assess the impact on road freight transport demand of allowing longer and heavier vehicles (LHVs) in Spain

The assessment on introducing Longer and Heavier Vehicles (LHVs) on the road freight transport demand is performed in this paper by applying an integrated modeling approach composed of a Random Utility-Based Multiregional Input-Output model (RUBMRIO) and a road transport network model. The approach strongly supports the concept that changes in transport costs derived from the LHVs allowance as well as the economic structure of regions have both direct and indirect effects on the road freight transport system. In addition, we estimate the magnitude and extent of demand changes in the road freight transportation system by using the commodity-based structure of the approach to identify the effect on traffic flows and on pollutant emissions over the whole network of Spain by considering a sensitivity analysis of the main parameters which determine the share of Heavy-Goods Vehicles (HGVs) and LHVs. The results show that the introduction of LHVs will strengthen the competitiveness of the road haulage sector by reducing costs, emissions, and the total freight vehicles required.

Estudo fenomenológico e numérico do escoamento estratificado óleo-água ondulado e com mistura na interface

Escoamentos bifásicos estão presentes em diversos processos naturais e industriais, como na indústria de petróleo. Podem apresentar-se em diferentes configurações topológicas, ou, padrões de escoamento, entre eles o escoamento estratificado ondulado e o estratificado com mistura na interface. Os escoamentos bifásicos estratificados óleo-água têm sido utilizados como uma forma conveniente de evitar a formação de emulsões de água em óleo em oleodutos e possuem uma ocorrência comum em poços de petróleo direcionais. Quando a onda interfacial ultrapassa determinado limite geométrico e cinemático, surge o fenômeno do entranhamento de gotas, representado por misturas entre as fases junto à interface que promovem um aumento na queda de pressão. Modelos têm sido apresentados pela literatura na tentativa de descrever o fenômeno do entranhamento de gotas. Neste trabalho é apresentada uma nova proposta de modelagem matemática unidimensional para o entranhamento de gotas com o objetivo de melhorar a previsão dos parâmetros envolvidos, em especial, da fração volumétrica de óleo e da queda de pressão bifásica. Também foi utilizada simulação numérica computacional, CFD (Computational Fluid Dynamics), com o uso de software comercial para obtenção dos valores dos parâmetros do escoamento estratificado ondulado óleo-água (fração volumétrica de óleo, queda de pressão, amplitude e comprimento da onda interfacial). Os resultados da modelagem fenomenológica para entranhamento e os de CFD foram comparados com bancos de dados experimentais. Os resultados em CFD mostram concordância com os resultados experimentais, tanto na análise qualitativa das propriedades geométricas das ondas interfaciais, quanto na comparação direta com os dados para fração volumétrica e queda de pressão. Os resultados numéricos da modelagem fenomenológica para fatores de entranhamento apresentam boa concordância com dados da literatura.

Modeling the economic losses from pressure ulcers among hospitalized patients in Australia

The objective of this study was to predict the number of cases of pressure ulcer, the bed days lost, and the economic value of these losses at Australian public hospitals. All adults (>= 18 years of age) with a minimum stay of 1 night and discharged from selected clinical units from all Australian public hospitals in 2001-02 were included in the study. The main outcome measures were the number of cases of pressure ulcer, bed days lost to pressure ulcer, and economic value of these losses. We predict a median of 95,695 cases of pressure ulcer with a median of 398,432 bed days lost, incurring median opportunity costs of AU$285 M. The number of cases, and so costs, were greatest in New South Wales and lowest in Australian Capitol Territory. We conclude that pressure ulcers represent a serious clinical and economic problem for a resource-constrained public hospital system. The most cost-effective, risk-reducing interventions should be pursued up to a point where the marginal benefit of prevention is equalized with marginal cost. By preventing pressure ulcers, public hospitals can improve efficiency and the quality of the patient's experience and health outcome.

A review of flow modeling for dense medium cyclones

A critical assessment is presented for the existing fluid flow models used for dense medium cyclones (DMCs) and hydrocyclones. As the present discussion indicates, the understanding of dense medium cyclone flow is still far from the complete. However, its similarity to the hydrocyclone provides a basis for improved understanding of fluid flow in DMCs. The complexity of fluid flow in DMCs is basically due to the existence of medium as well as the dominance of turbulent particle size and density effects on separation. Both the theoretical and experimental analysis is done with respect to two-phase motions and solid phase flow in hydrocyclones or DMCs. A detailed discussion is presented on the empirical, semiempirical, and the numerical models based upon both the vorticity-stream function approach and Navier-Stokes equations in their primitive variables and in cylindrical coordinates available in literature. The existing equations describing turbulence and multiphase flows in cyclone are also critically reviewed.

Hydrodynamic modeling of mineral wool fiber suspensions in a two-dimensional channel flow

A consequence of a loss of coolant accident is the damage of adjacent insulation materials (IM). IM may then be transported to the containment sump strainers where water is drawn into the ECCS (emergency core cooling system). Blockage of the strainers by IM lead to an increased pressure drop acting on the operating ECCS pumps. IM can also penetrate the strainers, enter the reactor coolant system and then accumulate in the reactor pressure vessel. An experimental and theoretical study that concentrates on mineral wool fiber transport in the containment sump and the ECCS is being performed. The study entails fiber generation and the assessment of fiber transport in single and multi-effect experiments. The experiments include measurement of the terminal settling velocity, the strainer pressure drop, fiber sedimentation and resuspension in a channel flow and jet flow in a rectangular tank. An integrated test facility is also operated to assess the compounded effects. Each experimental facility is used to provide data for the validation of equivalent computational fluid dynamic models. The channel flow facility allows the determination of the steady state distribution of the fibers at different flow velocities. The fibers are modeled in the Eulerian-Eulerian reference frame as spherical wetted agglomerates. The fiber agglomerate size, density, the relative viscosity of the fluid-fiber mixture and the turbulent dispersion of the fibers all affect the steady state accumulation of fibers at the channel base. In the current simulations, two fiber phases are separately considered. The particle size is kept constant while the density is modified, which affects both the terminal velocity and volume fraction. The relative viscosity is only significant at higher concentrations. The numerical model finds that the fibers accumulate at the channel base even at high velocities; therefore, modifications to the drag and turbulent dispersion forces can be made to reduce fiber accumulation.

CFD-modeling of insulation debris transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes important with regard to reactor safety research for PWR and BWR, when considering the long-term behavior of emergency core cooling systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb/impinge on the emergency core cooling systems. Open questions of generic interest are the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow and the particle load on strainers and corresponding pressure drop. A joint research project on such questions is being performed in cooperation between the University of Applied Sciences Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation of particle transport phenomena in coolant flow and the development of CFD models for its description. While the experiments are performed at the University at Zittau/Görlitz, the theoretical modeling efforts are concentrated at Forschungszentrum Dresden-Rossendorf. In the current paper the basic concepts for CFD-modeling are described and feasibility studies including the conceptual design of the experiments are presented. © 2009 Elsevier B.V. All rights reserved.

The separation of secondary oil-water dispersions in particulate beds

The literature relating to haze formation, methods of separation, coalescence mechanisms, and models by which droplets <100 μm are collected, coalesced and transferred, have been reviewed with particular reference to particulate bed coalescers. The separation of secondary oil-water dispersions was studied experimentally using packed beds of monosized glass ballotini particles. The variables investigated were superficial velocity, bed depth, particle size, and the phase ratio and drop size distribution of inlet secondary dispersion. A modified pump loop was used to generate secondary dispersions of toluene or Clairsol 350 in water with phase ratios between 0.5-6.0 v/v%.Inlet drop size distributions were determined using a Malvern Particle Size Analyser;effluent, coalesced droplets were sized by photography. Single phase flow pressure drop data were correlated by means of a Carman-Kozeny type equation. Correlations were obtained relating single and two phase pressure drops, as (ΔP2/μc)/ΔP1/μd) = kp Ua Lb dcc dpd Cine A flow equation was derived to correlate the two phase pressure drop data as, ΔP2/(ρcU2) = 8.64*107 [dc/D]-0.27 [L/D]0.71 [dp/D]-0.17 [NRe]1.5 [e1]-0.14 [Cin]0.26  In a comparison between functions to characterise the inlet drop size distributions a modification of the Weibull function provided the best fit of experimental data. The general mean drop diameter was correlated by: q_p q_p p_q /β      Γ ((q-3/β) +1) d qp = d fr  .α        Γ ((P-3/β +1 The measured and predicted mean inlet drop diameters agreed within ±15%. Secondary dispersion separation depends largely upon drop capture within a bed. A theoretical analysis of drop capture mechanisms in this work indicated that indirect interception and London-van der Waal's mechanisms predominate. Mathematical models of dispersed phase concentration m the bed were developed by considering drop motion to be analogous to molecular diffusion.The number of possible channels in a bed was predicted from a model in which the pores comprised randomly-interconnected passage-ways between adjacent packing elements and axial flow occured in cylinders on an equilateral triangular pitch. An expression was derived for length of service channels in a queuing system leading to the prediction of filter coefficients. The insight provided into the mechanisms of drop collection and travel, and the correlations of operating parameters, should assist design of industrial particulate bed coalescers.

Recuperação avançada de óleos pesados em poços fraturados utilizando aquecimento eletromagnético indutivo

The success achieved by thermal methods of recovery, in heavy oils, prompted the emergence of studies on the use of electromagnetic waves as heat generating sources in oil reservoirs. Thus, this generation is achieved by three types of different processes according to the frequency range used. They are: the electromagnetic induction heating, the resistive and the dielectric, also known as radiation. This study was based on computer simulations in oil reservoirs with characteristics similar to those found in the sedimentary basins of the Brazilian Northeast. All cases studied were simulated using the software STARS, CMG (Computer Group, version 2012.10 Modeling). Some simulations took into account the inclusion of electrically sensitive particles in certain sectors of the reservoir model studied by fracturing. The purpose of this work is the use of the electromagnetic induction heating as a recovery method of heavy oil, to check the influence of these aforementioned particles on the reservoir model used. Comparative analyses were made involving electromagnetic induction heating, the operation of hydraulic fracturing and the injection of water to the different situations of the reservoir model studied. It was found that fracturing the injection well in order that the electromagnetic heating occurs in the same well where there is water injection, there was a considerable increase in the recovery factor and in the cumulative oil production in relation to the models in which hydraulic fracturing occurred in the production well and water injection in the injection well. This is due to the generation of steam in situ in the reservoir.

Idealized modeling of the role of stability and shear on mesoscale gravity wave evolution

Mesoscale Gravity Waves (MGWs) are large pressure perturbations that form in the presence of a stable layer at the surface either behind Mesoscale Convective Systems (MCSs) in summer or over warm frontal surfaces behind elevated convection in winter. MGWs are associated with damaging winds, moderate to heavy precipitation, and occasional heat bursts at the surface. The forcing mechanism for MGWs in this study is hypothesized to be evaporative cooling occurring behind a convective line. This evaporatively-cooled air generates a downdraft that then depresses the surface-based stable layer and causes pressure decreases, strong wind speeds and MGW genesis. Using the Weather Research and Forecast Model (WRF) version 3.0, evaporative cooling is simulated using an imposed cold thermal. Sensitivity studies examine the response of MGW structure to different thermal and shear profiles where the strength and depth of the inversion are varied, as well as the amount of wind shear. MGWs are characterized in terms of response variables, such as wind speed perturbations (U'), temperature perturbations (T'), pressure perturbations (P'), potential temperature perturbations (Θ'), and the correlation coefficient (R) between U' and P'. Regime Diagrams portray the response of MGW to the above variables in order to better understand the formation, causes, and intensity of MGWs. The results of this study indicate that shallow, weak surface layers coupled with deep, neutral layers above favor the formation of waves of elevation. Conversely, deep strong surface layers coupled with deep, neutral layers above favor the formation of waves of depression. This is also the type of atmospheric setup that tends to produce substantial surface heating at the surface.

TWO-PHASE HEAT TRANSFER MECHANISMS WITHIN PLATE HEAT EXCHANGERS: EXPERIMENTS AND MODELING

Two-phase flow heat exchangers have been shown to have very high efficiencies, but the lack of a dependable model and data precludes them from use in many cases. Herein a new method for the measurement of local convective heat transfer coefficients from the outside of a heat transferring wall has been developed, which results in accurate local measurements of heat flux during two-phase flow. This novel technique uses a chevron-pattern corrugated plate heat exchanger consisting of a specially machined Calcium Fluoride plate and the refrigerant HFE7100, with heat flux values up to 1 W cm-2 and flow rates up to 300 kg m-2s-1. As Calcium Fluoride is largely transparent to infra-red radiation, the measurement of the surface temperature of PHE that is in direct contact with the liquid is accomplished through use of a mid-range (3.0-5.1 µm) infra-red camera. The objective of this study is to develop, validate, and use a unique infrared thermometry method to quantify the heat transfer characteristics of flow boiling within different Plate Heat Exchanger geometries. This new method allows high spatial and temporal resolution measurements. Furthermore quasi-local pressure measurements enable us to characterize the performance of each geometry. Validation of this technique will be demonstrated by comparison to accepted single and two-phase data. The results can be used to come up with new heat transfer correlations and optimization tools for heat exchanger designers. The scientific contribution of this thesis is, to give PHE developers further tools to allow them to identify the heat transfer and pressure drop performance of any corrugated plate pattern directly without the need to account for typical error sources due to inlet and outlet distribution systems. Furthermore, the designers will now gain information on the local heat transfer distribution within one plate heat exchanger cell which will help to choose the correct corrugation geometry for a given task.

Estudo paramétrico da segregação gravitacional na injeção contínua de vapor

Steam injection is the most used method of additional recovery for the extraction of heavy oil. In this type procedure is common to happen gravitational segregation and this phenomenon can affect the production of oil and therefore, it shoulds be considered in the projects of continuous steam injection. For many years, the gravitational segregation was not adequately considered in the calculation procedures in Reservoir Engineering. The effect of the gravity causes the segregation of fluids inside the porous media according to their densities. The results of simulation arising from reservoirs could provide the ability to deal with the gravity, and it became apparent that the effects of the gravity could significantly affect the performance of the reservoir. It know that the gravitational segregation can happen in almost every case where there is injection of light fluid, specially the steam, and occurs with greater intensity for viscous oil reservoirs. This work discusses the influence of some parameters of the rock-reservoir in segregation as viscosity, permeability, thickness, cover gas, porosity. From a model that shows the phenomenon with greater intensity, optimized some operational parameters as the rate flow rate steam, distance between the wells injector-producer, and interval of completion which contributed to the reduction in gravity override, thus increasing the oil recovery. It was shown a greater technical-economic viability for the model of distance between the wells 100 m. The analysis was performed using the simulator of CMG (Computer Modeling Group-Stars 2007.11, in which was observed by iterating between studied variables in heavy oil reservoirs with similar characteristics to Brazilian Northeast