Remodelamento do fígado, pâncreas e tecido adiposo em modelo experimental de síndrome metabólica tratado com telmisartana, sitagliptina e metformina

A intervenção farmacológica pode minimizar ou até mesmo reverter o remodelamento adverso em órgãos num modelo de síndrome metabólica. Este trabalho teve como objetivo avaliar os efeitos das monoterapias e associações medicamentosas sobre a morfologia do tecido adiposo, remodelamento hepático e pancreático em camundongos C57bl/6 alimentados com dieta very high-fat. Camundongos C57bl/6 machos foram alimentados com dieta very high-fat (HF, 60% de lipídios) ou dieta padrão (SC, 10% de lipídios) por 10 semanas, quando foram iniciados os tratamentos: HF-T (HF + Telmisartana, 5.2mg/Kg/dia), HF-S (HF + Sitagliptina, 1.08g/Kg/dia), HF-M (HF + Metformina, 310.0mg/Kg/dia) e as associações medicamentosas HF-TM, HF-TS e HF-SM. Os grupos tratados também tiveram livre acesso à dieta high fat e os tratamentos duraram 6 semanas. Técnicas morfométricas, estereológicas, imunohistoquímicas, ELISA, western blotting e microscopia eletrônica foram utilizadas. A dieta high-fat causou sobrepeso, intolerância oral à glucose, hiperinsulinemia, hipertrofia de ilhotas e adipócitos, grau 2 de esteatose hepatica (<33%) redução da expressão de PPAR-alfa e de GLUT-2, concomitante com aumento da expressão de SREBP-1 no grupo HF (P<0.0001). Por outro lado, todos os tratamentos resultaram em perda de peso significativa, reversão da resistência à insulina, hipertrofia de ilhotas e adipócitos e alívio da esteatose hepática. Somente os grupos HF-T e HF-TS apresentaram massa corporal similar ao grupo SC ao final do experimento, sendo que o ultimo também apresentou reversão da esteatose hepática. O aumento da expressão do PPAR-alfa paralelamente ao decréscimo da expressão do SREBP-1 explica os achados favoráveis para o fígado. A normalização do tamanho do adipócito foi consistente com os níveis maiores de adiponectina e com a redução dos níveis de TNF-alfa (P<0.0001) nos grupos tratados.Todos os tratamentos foram eficazes para controlar a síndrome metabólica. Os melhores resultados foram alcançados com a telmisartana e sitagliptina como monoterapias ou como associação entre essas, combinando a ativação parcial do PPAR-alfa no fígado com a extensão do tempo de ação das incretinas

Mode properties of off-axis one-sided hybrid resonator for novel high average power dual-slab laser

A novel dual-slab laser with off-axis one-sided hybrid resonator is presented. The mode properties of the hybrid resonator are calculated using a fast Fourier transform method (FFT). The influence of wavefront distoration on the output beam quality is considered. Results indicate that the novel dual-slab laser is better than the normal dual-slab laser with off-axis one-sided hybrid resonator.

Efficient excitations of radially and azimuthally polarized Nd 3+:YAG ceramic microchip laser by use of subwavelength multilayer concentric gratings composed of Nb2O5/SiO2

Cylindrical vector beams were produced from laser diode end-pumped Nd:YAG ceramic microchip laser by use of two types of subwavelength multilayer gratings as the axisymmetric-polarization output couplers respectively. The grating mirrors are composed of high- and low-refractive-index (Nb2O5/SiO2) layers alternately while each layer is shaped into triangle and concentric corrugations. For radially polarized laser output, the beam power reached 610mW with a polarization extinction ratio ( PER) of 61: 1 and a slope efficiency of 68.2%; for azimuthally polarized laser output, the beam power reached 626mW with a PER of 58: 1 and a slope efficiency of 47.6%. In both cases, the laser beams had near-diffraction limited quality. Small differences of beam power, PER and slope efficiency between radially and azimuthally polarized laser outputs were not critical, and could be minimized by further optimized adjustment to laser cavity and the reflectances of respective grating mirrors. The results manifested, by use of the photonic crystal gratings mirrors and end-pumped microchip laser configuration, CVBs can be generated efficiently with high modal symmetry and polarization purity. (C) 2008 Optical Society of America.

Dual-wavelength competitive output in Nd:Y3Sc1.5Al3.5O12 ceramic disk laser

In this paper, we demonstrated a dual-wavelength competitive output in Nd:Y3SC1.5Al3.5O12 ceramic disk laser. Different dual-wavelength output behaviors for Nd:YSAG and Nd:YAG ceramic disk laser were investigated and discussed. By applying the energy transfer model, we suggested the reasonable explanation for this new phenomenon as the disordered replacing of Al3+ ions by Sc3+ ions. The main advantage of the dual-wavelength ceramic laser is the possibility to serve as the seed source to generate Terahertz radiation. (C) 2008 Elsevier B.V. All rights reserved.

Structural Synthesis of 3-DoF Spatial Fully Parallel Manipulators

In this paper, the architectures of three degrees of freedom (3-DoF) spatial, fully parallel manipulators (PMs), whose limbs are structurally identical, are obtained systematically. To do this, the methodology followed makes use of the concepts of the displacement group theory of rigid body motion. This theory works with so-called 'motion generators'. That is, every limb is a kinematic chain that produces a certain type of displacement in the mobile platform or end-effector. The laws of group algebra will determine the actual motion pattern of the end-effector. The structural synthesis is a combinatorial process of different kinematic chains' topologies employed in order to get all of the 3-DoF motion pattern possibilities in the end-effector of the fully parallel manipulator.

Study on eight-pass dual-frequency laser interferometer with nanometer precision

A new dual-frequency laser displacement measurement interferometer with nanometer precision has been developed. An eight-pass optical subdivision technology is proposed to improve resolution based on commercial interferometers. A static positioning error measuring method has been used to examine the precision and repeatability of the laser interferometer. An optical resolution of 1.24 nm and an accuracy of nanometer scale have been achieved.

Modelling and simulation of the second-order Doppler error of a laser dual-frequency interferometer

Only the first- order Doppler frequency shift is considered in current laser dual- frequency interferometers; however; the second- order Doppler frequency shift should be considered when the measurement corner cube ( MCC) moves at high velocity or variable velocity because it can cause considerable error. The influence of the second- order Doppler frequency shift on interferometer error is studied in this paper, and a model of the second- order Doppler error is put forward. Moreover, the model has been simulated with both high velocity and variable velocity motion. The simulated results show that the second- order Doppler error is proportional to the velocity of the MCC when it moves with uniform motion and the measured displacement is certain. When the MCC moves with variable motion, the second- order Doppler error concerns not only velocity but also acceleration. When muzzle velocity is zero the second- order Doppler error caused by an acceleration of 0.6g can be up to 2.5 nm in 0.4 s, which is not negligible in nanometric measurement. Moreover, when the muzzle velocity is nonzero, the accelerated motion may result in a greater error and decelerated motion may result in a smaller error.