955 resultados para Dry-wood-termite
Resumo:
This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load
Resumo:
The composition of termite assemblages was analyzed at three Caatinga sites of the Seridó Ecological Station, located in the municipality of Serra Negra do Norte, in the state of Rio Grande do Norte, Brazil. These sites have been subjected to selective logging, and cleared for pasture and farming. A standardized sampling protocol for termite assemblages (30h/person/site) was conducted between September 2007 and February 2009. At each site we measured environmental variables, such as soil granulometry, pH and organic matter, necromass stock, vegetation height, tree density, stem diameter at ankle height (DAH) and the largest and the smallest crown width. Ten species of termites, belonging to eight genera and three families, were found at the three experimental sites. Four feeding-groups were sampled: wood-feeders, soil-feeders, wood-soil interface feeders and leaf-feeders. The wood-feeders were dominant in number of species and number of encounters at all sites. In general, the sites were not significantly different in relation to the environmental variables measured. The same pattern was observed for termite assemblages, where no significant differences in species richness, relative abundance and taxonomic and functional composition were observed between the three sites. The agreement between the composition of assemblages and environmental variables reinforces the potential of termites as biological indicators of habitat quality
Resumo:
O Eucalyptus grandis é uma das espécies mais cultivadas no Brasil devido à sua produtividade e qualidade da madeira. Avaliaram-se o efeito da aplicação de lodo de esgoto tratado (0 a 40 t ha-1 base seca) e uma dose de adubo mineral nos atributos físicos e químicos da madeira de Eucalyptus grandis de árvores com cinco anos de idade, no Município de Itatinga, São Paulo, Brasil. O tipo de solo foi caracterizado como Latossolo Vermelho-Amarelo Distrófico (argila = 120 g kg-1 na camada de 0-20 cm) e o clima, como mesotérmico úmido (Cwa), segundo a classificação de Köeppen. O delineamento experimental foi o de blocos ao acaso, com seis tratamentos e quatro repetições. O diâmetro à altura do peito (DAP), a altura das árvores e o volume de madeira foram obtidos em todas as parcelas de oito árvores com DAP na classe de maior freqüência. As caracterizações físicas e químicas da madeira foram realizadas de acordo com as normas da ABTCP, TAPPI e ABNT. O lodo de esgoto diminuiu a densidade básica da madeira, mas não afetou os teores de celulose, lignina, extrativos e o poder calorífico da madeira. O decréscimo de densidade da madeira pela adubação com lodo de esgoto foi compensado pela maior produtividade de madeira.
Resumo:
Aim: The present investigation aims at evaluating attention to the occurrence and abundance of planktonic communities in fishponds and their relationships to the management employed; Methods: Seven fishponds (V1-V7) fertilized with different treatments were analyzed by monthly sampling, taken between July and December/07, during both dry and rainy seasons; Results: Euglenophyceae and Chlorophyceae were most representative during the studied period. In the fishpond with organic fertilizer Cyanobacteria was more than 65 and 90% of total phytoplankton abundance in September and August, mainly represented by Microcystis sp. (14,595 and 22,500 ind.L-1, respectively). An inverse relationship occurred between Copepoda and Cladocera, and Copepoda and Rotifera were present in all fishponds during the both seasons. Diversity (H') and species richness was low and equitability indices generally showed the highest values for zooplankton. The lowest values were observed for phytoplankton during the rainy season; Conclusions: The use of organic fertilizer and the random emptying of the fishponds affected directly and species diversity and richness, with dominance of Cyanobacteria emphasizing the need to adopt a management technique to increase fishponds productivity and consequently, fish production.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A Mimosa caesalpiniaefolia Benth. é uma espécie nativa da região Nordeste, que vem sendo progressivamente cultivada do Maranhão ao Rio de Janeiro. A planta apresenta grande potencial para arborização, cerca viva e produção de madeira. O presente trabalho teve como objetivo definir o tipo de substrato, a temperatura, o tempo médio e a frequência relativa de germinação, para auxiliar a condução de testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia. Para tanto, realizou-se um experimento no Laboratório de Análise de Sementes do CCA-UFPB, em Areia-PB, em delineamento inteiramente casualizado com os tratamentos distribuídos em esquema fatorial 4x4, com os fatores temperaturas (20, 25, 30ºC constantes e 20-30ºC alternadas) e substratos (entre papel, sobre papel, entre areia e entre vermiculita), em quatro repetições de 25 sementes. Foram analisados os seguintes parâmetros: porcentagem de germinação e de plântulas anormais, primeira contagem da germinação e velocidade de germinação, tempo médio e frequência relativa de germinação, massa fresca e massa seca de plântulas. A temperatura de 25ºC mostrou-se mais adequada para a condução dos testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia, independentemente do substrato utilizado. O substrato entre papel foi o mais apropriado para avaliação da qualidade fisiológica das sementes e a sincronização do processo germinativo foi maior no substrato entre papel, independentemente da temperatura empregada.
Resumo:
The objective of the present study was to evaluate the characteristics of the sward canopy of Marandu grass during the rainy season, the wet-to-dry transition and the dry seasons, between March and September 2004, under intermittent grazing, and to correlate those characteristics with the performance of crossbred heifers receiving mineral supplements ad libitum or protein supplements. The experiment consisted of a randomized block design with three blocks (set of 13 paddocks), each containing five crossbred heifers per experimental unit, totaling 15 replicates. The heifers were given protein supplements daily in individual stalls and received an average 4 g/kg/day of the supplement during the rainy season and 5 g/kg/day during the dry season. Their weight gain was assessed monthly. The pasture structure was assessed through destructive sampling, and the bromatological composition of esophageal extrusa samples was also assessed. Analysis of variance was used to assess performance, and regression analysis was used to evaluate the sward canopy characteristics in relation to the months of the year. A cluster procedure was used to determine the similarity between the months of the year under assessment. Two different groups were formed for pasture evaluation: one group including the months of March to July and another group including the months of August and September. The first group exhibited a better canopy structure than the second group. This fact was corroborated by the animal performance, which was lower during the months of the second group. Low-intake protein supplementation was effective in increasing the performance of the grazing heifers. Pasture structure is critical for animal performance in a grazing environment, regardless of the type of supplementation.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The objective of this study was to evaluate performance and daytime ingestive behavior of 84 Nellore young bulls in the post-weaning phase kept on Brachiaria brizantha cv. Marandu pastures during the dry season. Treatments were protein mineral supplementation (1 g/kg body weight) and protein+energy mineral supplementation (3 g/kg body weight). The experimental area comprised 12 paddocks in a total area of 27.36 ha, divided in two blocks of six paddocks each, having three replications per treatment in each block, with 42 animals/treatment. The data were subjected to variance analysis with repeated measures over time via procedure PROCMIXED of SAS (Statistical Analysis System, version 9.0) and means were compared by the Tukey test at 5% probability. The initial average weight of animals was 204.8 kg; final weights were 260.9 and 276.9 kg for animals that received protein and protein+energy supplement, respectively. The forage availability, sward height and stocking rate values did not differ with supplementation, but they showed difference between the experimental periods. The average time spent grazing during daylight of animals fed protein+energy supplement was shorter as compared with those which consumed protein supplement. Animals kept under the same pasture conditions during the dry season show better performance when they receive protein+energy supplement than protein supplement.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The aim of this study was to verify the average fiber length and the juvenile and mature wood zones from Hevea brasiliensis proveniences from a reforestation area in São Paulo, Brazil. For this purpose, five Hevea brasiliensis trees were randomly collected from a 50-year-old plantation, located in Balsamo, São Paulo, Brazil. The trees were cut and five flat sawn boards were obtained. The juvenile and mature wood zones were determined by fiber length measurement from the pith to the bark. The results showed that: (a) the juvenile wood of this species occurred approx. between 40 and 55 mm, from the pith, and from this point forward, the mature wood zone was found; (b) there was a significant difference between the average fiber length of juvenile wood (1.26 mm) and mature wood (1.51 mm).
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
X-rays were initially used for the inspection of special-purpose wood pieces for quantitative evaluation properties of different species. X-ray densitometry has had its use expanded ill dendroclimatology of Picea engelmannii trees. Subsequent laboratories developed applications of X-ray densitometry for environmental, wood science and technology, and related areas. This paper describes the basic methodology of X-ray densitometry applied to the eucalypt wood analysis, as well its presenting the results of applications in three areas: (i) evaluation of wood biodegradation by white rot fungi, (ii) detection of sapwood and heartwood, and (iii) determination of the effect of management oil wood properties. The wood decayed by white rot fungi was detected by X-ray densitometry with it decreasing wood density due to the biodegradation of cell wall components. The sapwood and heartwood of eucalypts were separated in response to the attenuation of X-rays, reflected by the wood anatomical structure and chemical composition. Also, Ill eucalypt trees after the application of irrigation and i characteristic wood density profiles were detected. Ill addition, the significant potential of X-ray densitometry for eucalypt wood research and analysis is discussed.
Resumo:
O trabalho objetivou avaliar a propagação da figueira com estacas semilenhosas, empregando-se concentrações de ácido indolbutírico, em diferentes épocas de coleta. O material propagativo utilizado foi proveniente de figueiras da cv. Roxo de Valinhos, com 5 anos de idade. As estacas foram retiradas por ocasião da poda hibernal, no final dos meses de agosto, setembro e outubro, as quais foram tratadas com AIB preparado em pó, nas seguintes concentrações: 0 (testemunha); 2.500; 5.000; 7.500 e 10.000 mg kg-1. Posteriormente, foram colocadas para enraizar em bandejas de polipropileno, tendo como substrato vermiculita e mantidas sob nebulização intermitente por 70 dias. Decorrido esse período, avaliaram-se a porcentagem de estacas enraizadas (%), o comprimento da maior raiz (cm) e a massa seca das raízes (g). O delineamento experimental utilizado foi o inteiramente casualizado, em esquema fatorial 3 x 5. Observou-se que estacas provenientes do tratamento-testemunha e da poda de agosto apresentaram baixa porcentagem de enraizamento (20%), menor comprimento e massa seca de raiz, necessitando de tratamento com AIB na concentração de 2.500 mg kg-1, que aumentou significativamente esta porcentagem (90%). Estacas oriundas da poda de setembro e outubro não necessitaram de tratamento com AIB para conseguirem um elevado enraizamento. O mês de setembro foi o mais viável para a coleta de estacas de figueira, pois houve maior porcentagem de enraizamento das estacas (95-100%). As estacas tratadas com 7.500 e 10.000 mg kg-1 de AIB apresentaram as mais baixas porcentagens de enraizamento nos meses de agosto e outubro.