Implantación de la ISO 14001 en una planta de tratamiento de vehículos fuera de uso (VFU)

Nos hemos propuesto implantar la ISO 14001 en un centro autorizado de tratamiento de vehículos fuera de uso, denominado Recycling Gandía, S.L., con el fin de que dicho centro pueda obtener una ventaja competitiva, respecto de otros centros ubicados próximamente, dada la fuerte competencia existente. Con la implantación de un Sistema de Gestión Medioambiental y más concretamente la ISO 14001, se puede conseguir una mejora de la imagen de la empresa, un ahorro de costes, se pueden mejorar las relaciones con la Administración e incluso con las entidades financieras, se puede contribuir a la motivación de los trabajadores, se asegura el cumplimiento de la legislación ambiental. La actividad que nos ocupa, se dedica a la recepción y descontaminación de vehículos al final de su vida útil, reutilizando piezas o componentes de recambio., Los objetivos del presente trabajo van a ser fundamentalmente, el implantar el Manual de Gestión Ambiental en la planta de tratamiento de vehículos fuera de uso y el describir todos los procedimientos genéricos a seguir. Como conclusiones de este trabajo, tendremos las auditorías con las no conformidades detectadas, así como el compromiso adquirido en todos los niveles y departamentos de la empresa, lo cual se traducirá en una mejor satisfacción de los clientes y por tanto un aumento en el número de vehículos a tratar.

Implantació d'un sistema de gestió integrada: ISO 9001:00, ISO 14001:04 i OHSAS 18001:07, en un centre d'estètica i perruqueria

En aquests últims anys, són moltes les empreses que han optat per la utilització de sistemes de gestió normalitzats, per a garantir la rendibilitat i fiabilitat dels resultats de la implantació del sistema de gestió en qüestió. A la dècada dels 90 va ser quan la implantació de sistemes de gestió va començar a ser important en la majoria de sectors econòmics. L’evolució en els sistemes de gestió a trets generals va iniciar-se primerament en l’àmbit de la qualitat, seguidament en la gestió ambiental i en última instància en la prevenció de riscos laborals. Aquests tres tipus de sistemes de gestió, en els últims anys s’han anat integrant, de manera que s’han reduït els recursos i els esforços emprats en la gestió, millorant significativament l’eficàcia i l’eficiència d’aquests sistemes. L’objectiu principal que persegueix aquest projecte, és definir un sistema de gestió que permeti a l’empresa conduir les seves activitats de forma simplificada i ordenada, i que alhora faciliti la informació necessària per a corregir i millorar les activitats. Un altre objectiu que pretén aconseguir aquest projecte, és el de dissenyar un SGI que aprofiti les sinèrgies generades en els diferents àmbits de la pròpia empresa i fomenti les interaccions entre els diferents nivells de l’organització. En conseqüència, millorarà de forma important els fluxos d’informació dins de l’empresa minimitzant els esforços i la pèrdua d’informació. El mètode escollit per a la implantació del SGI, ha estat la Gestió per Processos, la qual es basa en la definició i seguiment dels processos de l’empresa, partint de les necessitats del client i acabant quan aquestes estan satisfetes. En conclusió, a la finalització del present projecte s’obtindrà un SGI, amb tots els processos de l’empresa definits i implantats, que doni compliment a les normes UNEEN-ISO 9001:00, UNE-EN-ISO 14001:04 i OHSAS 18001:07. Aquest SGI, que s’ha realitzat des d’un punt de vista documental i teòric, suposarà una millora de l’eficàcia operativa dels processos i una important millora competitiva de l’empresa.

Gestió d'un portal web d'intercanvi de coneixement

En aquest món on ens ha tocat viure i patir canvis tan durs amb la crisi econòmica que patim, que ens ha fet passar de lligar els gossos amb llonganisses a vigilar en les despeses del dia a dia per poder arribar just a final de mes, és el moment de reinventar-se. És per aquest motiu que presento aquesta idea, on el seu objectiu és desenvolupar una pàgina web que esdevingui un punt de trobada entre usuaris que volen transmetre o ampliar el seu coneixement i oferir-los la possibilitat que entre ells puguin compartir les seves habilitats i destreses. El web consistirà en un panell d’activitats on els usuaris un cop s’hagin registrat puguin crear les activitats que vulguin aprendre o bé ensenyar, tot demanant, si ho desitgen, quelcom a canvi. Aleshores la resta d’usuaris si els interessa l’activitat, poden acceptar la demanda o bé fer una proposta pròpia. A partir d’aquí els usuaris s’han de posar d’acord a l’hora de dur a terme l’activitat. El web disposarà d’una part pels usuaris amb permisos d’administrador perquè puguin gestionar el portal. Aquest projecte s’ha desenvolupat amb el framework de PHP Codeigniter, el qual utilitza la programació per capes MVC, la qual separa la programació en tres parts: el Model, la Vista i el Controlador. També s’han utilitzat els llenguatges HTML5 i CSS3, i jQuery, que és una llibreria de JavaScript. Com a sistema gestor de base de dades s’ha utilitzat el MySQL.

Programa de gestió per la Boutique Shahrazad

Per tal d'iniciar el meu TFC, vaig decidir començar a desenvolupar un programa que contempla la gestió diària del comerç, així com la dels productes, clients, proveïdors, vendes i compres, d’un negoci que es tracta d’una botiga de roba, sabates,bosses i complements, per tal de convertir-ho en un sistema de gestió més complert. Actualment, l’entorn de negoci en el petit comerç està cada cop més desplaçat degut al gran creixement de les grans superfícies per part de franquícies de cadenes molt potents. A més, els clients són cada cop més exigents i el mercat està cada vegada més saturat. És per això que voldrem incloure un valor afegit al sistema, per poder donar un nou punt de vista al negoci, de tal manera que permeti nodrir la nostra relació amb el client, de manera que la col•laboració sigui satisfactòria per ambdues parts. I per acabar s’elabora una pàgina web per tal de fer promoció i publicitat per la botiga, ja que avui en dia és molt important existir en el món virtual.

Gestión centralizada de software de una red sanitaria en Clientes Windows

El proyecto que se presenta trata del estudio y desarrollo para la implementación de un sistema de gestión centralizada de software de una red Sanitaria en Clientes Windows. Este proyecto surge de la necesidad, en una empresa concertada dado el crecimiento de la red, de poder administrar los host de una manera más automatizada y más eficiente.

El sistema de gestión documental de la Universitat de Barcelona en el marco de la Administración electrónica: un elemento más para fomentar la mejora continua

[eng] We describe the project for the organization of the documentary management system at the University of Barcelona, which is inspired by the opportunities presented by the introduction of electronic administration. We stress the function of the documentary management system as an agent for promoting continuous innovation and improvement. We illustrate this vision with a description of the process of introducing the documentary management system in the area of research.

El sistema de gestió documental de la Universitat de Barcelona en el marc de l'Administració electrònica: un element més per fomentar la millora contínua

[eng] We describe the project for the organization of the documentary management system at the University of Barcelona, which is inspired by the opportunities presented by the introduction of electronic administration. We stress the function of the documentary management system as an agent for promoting continuous innovation and improvement. We illustrate this vision with a description of the process of introducing the documentary management system in the area of research.

Uso de un sistema de elearning como intranet en la Fac. de Biblioteconomia i Documentació de la Univ. de Barcelona

Se presenta la adaptación de un programa de gestión de aprendizaje (Moodle) a las necesidades de gestión de una intranet administrativa. Se describen los requisitos, su estructura y se analiza su grado de utilización cuatro años después de su puesta en marcha, indicando los principales puntos débiles del sistema y las posibles aplicaciones complementarias para contrarrestarlas.

Compressibility of Oxisol aggregates under no-till in response to soil water potential

The system of no-till sowing stands out as being a technology that suits the objectives of more rational use of the soil and greater protection against the erosion. However, through till, any of it, occurs modifications of the soil's structure. This current work aims to study the influence of the energy state of the water and of the organic matter on the mechanism of compaction of Red Oxisol under no-till management system. Humid and non-deformed sample were collected in horizon AP of two agricultural areas under no-till, with and without rotation of cultures. In the laboratory, these samples were broken into fragments and sifted to obtain aggregates of 4 to 5 mm sized, which were placed in equilibrium under four matrix potentials. Thereafter, they were exposed to uni-dimensional compression with pressures varying from 32 to 1,000 kPa. The results in such a way show that the highest compressibility of aggregates both for the tilling with rotation of cultures as for the tilling without rotation of cultures, occurred for matrix potential -32 kPa (humidity of 0.29-0.32 kg kg-1, respectively), while the minor occurred for the potentials of -1 and -1,000 kPa (humidity of 0.35 and 0.27 kg kg-1, respectively), indicating that this soil should not be worked with humidity ranging around 0.29 to 0.32 kg kg-1 and the highest reduction of volume of aggregates was obtained for the mechanical pressures lower than 600 inferior kPa, indicating that these soils showed to be very influenced by compression, when exposed to mechanical work. Also, the aggregates of soil under no-till and rotation of crops presented higher sensitivity to the compression than the aggregates of soil under no-till and without rotation of crops, possibly for having better structural conditions given to a higher content of organic matter.

Characterization of soil structure and porosity under long-term conventional tillage and no-tillage systems

Different management systems tend to modify soil structure and porosity over the years. The aim of this study was to study modifications in the morphostructure and porosity of dystroferric Red Latosol (Oxisol) under conventional tillage and no-tillage over a 31- year period. The study began with the description of soil profiles based on the cropping profile method, to identify the most compact structures, define sample collection points for physical and chemical analysis, and determine the water retention curve. A forest soil profile was described and used as reference. The results showed that, under conventional tillage, the microaggregate structure of the Oxisol was fragmented between 0 and 0.20 m, and compact (bulk density = 1.52 Mg m-3) in the sub-surface layer between 0.20 and 0.50 m. Under no-tillage, the structure became compacted (bulk density = 1.40 Mg m-3) between 0 and 0.60 m, but contained fissures and biopores. The volume of the class with a pore diameter of > 100 µm under no-tillage was limited, but practically non-existent in the conventional management system. On the other hand, the classes with a pore diameter of < 100 µm were not affected by the type of soil management system.

Nutrient supply by mass flow and diffusion to maize plants in response to soil aggregate size and water potential

Nutrients are basically transported to the roots by mass flow and diffusion. The aim of this study was to quantify the contribution of these two mechanisms to the acquisition of macronutrients (N, P, K, Ca, Mg, and S) and cationic micronutrients (Fe, Mn, Zn, and Cu) by maize plants as well as xylem exudate volume and composition in response to soil aggregate size and water availability. The experiment was conducted in a greenhouse with samples of an Oxisol, from under two management systems: a region of natural savanna-like vegetation (Cerradão, CER) and continuous maize under conventional management for over 30 years (CCM). The treatments were arranged in a factorial [2 x (1 + 2) x 2] design, with two management systems (CER and CCM), (1 + 2) soil sifted through a 4 mm sieve and two aggregate classes (< 0.5 mm and 0.5 - 4.0 mm) and two soil matric potentials (-40 and -10 kPa). These were evaluated in a randomized block design with four replications. The experiment was conducted for 70 days after sowing. The influence of soil aggregate size and water potential on the nutrient transport mechanisms was highest in soil samples with higher nutrient concentrations in solution, in the CER system; diffusion became more relevant when water availability was higher and in aggregates < 0.5 mm. The volume of xylem exudate collected from maize plants increased with the decrease in aggregate size and the increased availability of soil water in the CER system. The highest Ca and Mg concentrations in the xylem exudate of plants grown on samples from the CER system were related to the high concentrations of these nutrients in the soil solution of this management system.

Long-term C-CO2 emissions and carbon crop residue mineralization in an oxisol under different tillage and crop rotation systems

Soil C-CO2 emissions are sensitive indicators of management system impacts on soil organic matter (SOM). The main soil C-CO2 sources at the soil-plant interface are the decomposition of crop residues, SOM turnover, and respiration of roots and soil biota. The objectives of this study were to evaluate the impacts of tillage and cropping systems on long-term soil C-CO2 emissions and their relationship with carbon (C) mineralization of crop residues. A long-term experiment was conducted in a Red Oxisol in Cruz Alta, RS, Brazil, with subtropical climate Cfa (Köppen classification), mean annual precipitation of 1,774 mm and mean annual temperature of 19.2 ºC. Treatments consisted of two tillage systems: (a) conventional tillage (CT) and (b) no tillage (NT) in combination with three cropping systems: (a) R0- monoculture system (soybean/wheat), (b) R1- winter crop rotation (soybean/wheat/soybean/black oat), and (c) R2- intensive crop rotation (soybean/ black oat/soybean/black oat + common vetch/maize/oilseed radish/wheat). The soil C-CO2 efflux was measured every 14 days for two years (48 measurements), by trapping the CO2 in an alkaline solution. The soil gravimetric moisture in the 0-0.05 m layer was determined concomitantly with the C-CO2 efflux measurements. The crop residue C mineralization was evaluated with the mesh-bag method, with sampling 14, 28, 56, 84, 112, and 140 days after the beginning of the evaluation period for C measurements. Four C conservation indexes were used to assess the relation between C-CO2 efflux and soil C stock and its compartments. The crop residue C mineralization fit an exponential model in time. For black oat, wheat and maize residues, C mineralization was higher in CT than NT, while for soybean it was similar. Soil moisture was higher in NT than CT, mainly in the second year of evaluation. There was no difference in tillage systems for annual average C-CO2 emissions, but in some individual evaluations, differences between tillage systems were noticed for C-CO2 evolution. Soil C-CO2 effluxes followed a bi-modal pattern, with peaks in October/November and February/March. The highest emission was recorded in the summer and the lowest in the winter. The C-CO2 effluxes were weakly correlated to air temperature and not correlated to soil moisture. Based on the soil C conservation indexes investigated, NT associated to intensive crop rotation was more C conserving than CT with monoculture.

Physical properties of an Alfisol and no-till soybean yield

It is known that any kind of soil management causes changes in the soil physical characteristics and can affect agricultural yield. The purpose of this study was to evaluate soil properties of an Alfisol and soybean yield under different management systems for no-tillage annual crops, no-tillage with chiseling and no-tillage crop rotation. The 11-year experiment was initiated in the 1998/99 growing season, on 100 x 30 m plots (11 % slope). Soil samples (5 per management system) were systematically collected (0-25 cm layer) in the summer growing season, to quantify soil organic matter, bulk density, macroporosity and flocculation, as well as soybean yield. The highest values for soil bulk density and organic matter content and the lowest for macroporosity were observed in the no-till system alone, whereas in the no-till system with quarterly chiseling the values for organic matter content were lowest, and no-tillage crop rotation resulted in the highest values for organic matter and macroporosity, and the lowest for soil bulk density. The average soybean yield was highest under no-till and trimestrial chiseling or crop rotation, and lowest for no-tillage annual crops no-tillage annual crops alone.

Soil water erosion under different cultivation systems and different fertilization rates and forms over 10 years

The action of rain and surface runoff together are the active agents of water erosion, and further influences are the soil type, terrain, soil cover, soil management, and conservation practices. Soil water erosion is low in the no-tillage management system, being influenced by the amount and form of lime and fertilizer application to the soil, among other factors. The aim was to evaluate the effect of the form of liming, the quantity and management of fertilizer application on the soil and water losses by erosion under natural rainfall. The study was carried out between 2003 and 2013 on a Humic Dystrupept soil, with the following treatments: T1 - cultivation with liming and corrective fertilizer incorporated into the soil in the first year, and with 100 % annual maintenance fertilization of P and K; T2 - surface liming and corrective fertilization distributed over five years, and with 75 % annual maintenance fertilization of P and K; T3 - surface liming and corrective fertilization distributed over three years, and with 50 % annual maintenance fertilization of P and K; T4 - surface liming and corrective fertilization distributed over two years, and with 25 % annual maintenance fertilization of P and K; T5 - fallow soil, without liming or fertilization. In the rotation the crops black oat (Avena strigosa ), soybean (Glycine max ), common vetch (Vicia sativa ), maize (Zea mays ), fodder radish (Raphanus sativus ), and black beans (Phaseolus vulgaris ). The split application of lime and mineral fertilizer to the soil surface in a no-tillage system over three and five years, results in better control of soil losses than when split in two years. The increase in the amount of fertilizer applied to the soil surface under no-tillage cultivation increases phytomass production and reduces soil loss by water erosion. Water losses in treatments under no-tillage cultivation were low in all crop cycles, with a similar behavior as soil losses.

WATER INFILTRATION IN TWO CULTIVATED SOILS IN SOUTHERN BRAZIL

Infiltration is the passage of water through the soil surface, influenced by the soil type and cultivation and by the soil roughness, surface cover and water content. Infiltration absorbs most of the rainwater and is therefore crucial for planning mechanical conservation practices to manage runoff. This study determined water infiltration in two soil types under different types of management and cultivation, with simulated rainfall of varying intensity and duration applied at different times, and to adjust the empirical model of Horton to the infiltration data. The study was conducted in southern Brazil, on Dystric Nitisol (Nitossolo Bruno aluminoférrico húmico) and Humic Cambisol (Cambissolo Húmico alumínico léptico) soils to assess the following situations: simulated rains on the Nitisol from 2001 to 2012 in 31 treatments, differing in crop type, sowing direction, type of soil opener on the seeder, amount and type of crop residue and amount of liquid swine manure applied; on the Cambisol, rains were simlated from 2006 to 2012 and 18 treatments were evaluated, differing in crop, seeding direction and crop residue type. The constant of the water infiltration rate into the soil varies significantly with the soil type (30.2 mm h-1 in the Nitisol and 6.6 mm h-1 in the Cambisol), regardless of the management system, application time and rain intensity and duration. At the end of rainfalls, soil-water infiltration varies significantly with the management system, with the timing of application and rain intensity and duration, with values ranging from 13 to 59 mm h-1, in the two studied soils. The characteristics of the sowing operation in terms of relief, crop type and amount and type of crop residue influenced soil water infiltration: in the Nitisol, the values of contour and downhill seeding vary between 27 and 43 mm h-1, respectively, with crop residues of corn, wheat and soybean while in the Cambisol, the variation is between 2 and 36 mm h-1, respectively, in soybean and corn crops. The Horton model fits the values of water infiltration rate into the soil, resulting in the equation i = 30.2 + (68.2 - 30.2) e-0.0371t (R2 = 0.94**) for the Nitisol and i = 6.6 + (64.5 - 6.6) e-0.0537t (R2 = 0.99**) for the Cambisol.