Innovative design : developing strategies to improve developer attitudes to sustainable housing

The literature advocates more widespread adoption of a particular type of house – a manufactured high performance green house and/or house components (MHPGH) and this is the focus of the research proposal outlined in this conceptual paper. The aim of the current paper is to outline a robust program of work to improve adoption of MHPGH. The contribution of houses to climate change is investigated, the conservatism of the construction industry is documented, a conceptual framework through which to understand the problem is presented; a program of research to bring about change is outlined; and the benefits of doing so are summarised. The contribution of the paper is the presentation of novel theory and methods to address sustainability problems in the construction industry. Future work will involve execution of the proposal. A limitation of the paper is that the effectiveness of the proposed theory and methods are yet to be tested.

Educating the creative citizen : design education programs in the knowledge economy

The shift in the last twenty years from an industrialised economy to a knowledge economy demands new modes of education in which individuals can effectively acquire 21st century competencies. This article builds on the findings and recommendations of a Knowledge Economy Market Development Mapping Study (KEMDMS), conducted in Queensland, Australia. The study was conducted to identify the value of design education programs from primary school through to the professional development level. This article considers the ability of design education as a framework to deliver on the 21st century competences required for the three defining features of the creative knowledge economy – Innovation, Transdisciplinarity and Networks. This is achieved by contextualising key findings from the KEMDMS, including current design education initiatives, and outlining the current and future challenges faced. From this, this article focuses on the role of the tertiary education sector as the central actor in the creative economy in the development of generic design/design education capabilities. Through the unpacking of the study's three key observation themes for change, a holistic design education framework is proposed, and further research directions are discussed.

Expert Opinion: Serious Concerns regarding Western Australian Planning Commission (WAPC) Draft Policy 3.7 “Planning for Bushfire Risk Management” and associated Guidelines (May 2014)

10 page document containing expert assessment of shortcomings of Western Australian State Planning Policy SPP3.7- Planning for Bushfire Risk Management. Document produced on behalf of QUT and submitted to and published by the WAPC as part of their public consultation process for their draft policy.

Bushfire responsive design : reconciling biodiversity conservation and bushfire safety with daily life

30 minute invited presentation on design-led bushfire risk mitigatition stategies for reconciling the two (otherwise) opposing managment goals of bushfire safety and biodiversity conservation. Targeted at the S E Queensland national audience participants.

Design democratisation and its understandings through the meaning of the word “design” in Portuguese colonised countries

This paper explores the literature and analyses the different uses and understandings of the word “design” in Portuguese colonised countries, using Brazil as the main example. It investigates the relationship between the linguistic existence of terms to define and describe “design” as an activity and field, and the roles and perceptions of Design by the general society. It also addresses the effects that the lack of a proper translation causes on the local community from a cultural point of view. The current perception of Design in Portuguese colonies is associated to two main aspects: linguistic and historical. Both of them differentiate the countries taken into consideration from other countries that have a different background. The changes associated to the meaning of “design” throughout the years, caused a great impact on the perceptions that people have about Design. On the other hand, the development of Design has also influenced the changes on the meaning of the term, as a result of the legacy from the colonisation period and also as a characteristic of the Portuguese language. Design has developed and reached a level of excellence in Portuguese colonised countries that competes with the most traditional Design cultures in the world. However, this level of Design is enmeshed into an elite belonging to universities and specialised markets, therefore Design is not democratised. The ultimate aim of this study is to promote discussions on how to make the discourse surrounding this area more accessible to people from non-English speaking countries that do not have the word “design” in their local language.

Childhood atopic dermatitis : a cross-sectional study of relationships between child and parent factors, atopic dermatitis management, and disease severity

Background: Successful management of atopic dermatitis poses a significant and ongoing challenge to parents of affected children. Despite frequent reports of child behaviour problems and parenting difficulties, there is a paucity of literature examining relationships between child behaviour and parents' confidence and competence with treatment. Objectives: To examine relationships between child, parent, and family variables, parents' self-efficacy for managing atopic dermatitis, self-reported performance of management tasks, observed competence with providing treatment, and atopic dermatitis severity. Design: Cross-sectional study design. Participants A sample of 64 parent-child dyads was recruited from the dermatology clinic of a paediatric tertiary referral hospital in Brisbane, Australia. Methods: Parents completed self-report questionnaires examining child behaviour, parents' adjustment, parenting conflict, parents' relationship satisfaction, and parents' self-efficacy and self-reported performance of key management tasks. Severity of atopic dermatitis was assessed using the Scoring Atopic Dermatitis index. A routine home treatment session was observed, and parents' competence in carrying out the child's treatment assessed. Results: Pearson's and Spearman's correlations identified significant relationships (p< .05) between parents' self-efficacy and disease severity, child behaviour difficulties, parent depression and stress, parenting conflict, and relationship satisfaction. There were also significant relationships between each of these variables and parents' self-reported performance of management tasks. More profound child behaviour difficulties were associated with more severe atopic dermatitis and greater parent stress. Using multiple linear regressions, significant proportions of variation in parents' self-efficacy and self-reported task performance were explained by child behaviour difficulties and parents' formal education. Self-efficacy emerged as a likely mediator for relationships between both child behaviour and parents' education, and self-reported task performance. Direct observation of treatment sessions revealed strong relationships between parents' treatment competence and parents' self-efficacy, outcome expectations, and self-reported task performance. Less competent task performance was also associated with greater parent-reported child behaviour difficulties, parent depression and stress, parenting conflict, and relationship dissatisfaction. Conclusion: This study revealed the importance of child behaviour to parents' confidence and practices in the context of atopic dermatitis management. Children with more severe atopic dermatitis are at risk of presenting with challenging behaviour problems and their parents struggle to manage the condition successfully.

Exercise during chemotherapy for ovarian cancer (Echo) : study design features and outcomes of a Cancer Australia and Cancer Council Australia funded randomised, controlled trial

Ovarian cancer is the most common cause of gynaecological cancer death, with an overall 5-year relative survival of 43%. Impaired physical wellbeing and overall quality of life (QoL) represent major concerns for women during and following ovarian cancer treatment, predict survival and are amenable to change through interventions. Exercise, now considered an important part of overall management of a number of cancers, improves short-term outcomes (e.g., function, fatigue, QoL) during chemotherapy...

On Merging Business Process Management and Geographic Information Systems : Modeling and Execution of Ecological Concerns in Processes

Business Process Management describes a holistic management approach for the systematic design, modeling, execution, validation, monitoring and improvement of organizational business processes. Traditionally, most attention within this community has been given to control-flow aspects, i.e., the ordering and sequencing of business activities, oftentimes in isolation with regards to the context in which these activities occur. In this paper, we propose an approach that allows executable process models to be integrated with Geographic Information Systems. This approach enables process models to take geospatial and other geographic aspects into account in an explicit manner both during the modeling phase and the execution phase. We contribute a structured modeling methodology, based on the well-known Business Process Model and Notation standard, which is formalized by means of a mapping to executable Colored Petri nets. We illustrate the feasibility of our approach by means of a sustainability-focused case example of a process with important ecological concerns.

Understanding, utilizing and valuing design tools in business

This chapter examines the tools and activities (referred to as approaches) used by a catalyst while facilitating a design-led transformation within an Australian manufacturing small to medium enterprise (SME). Design-led innovation (DLI) aids the use of design at a higher strategic level; however few existing studies investigate the relative influence of approaches used by a catalyst while helping a firm to make a transition in the utilisation of design, specifically from a styling tool to a strategic process. This paper identifies the triggers to encouraging a shift toward understanding, utilising and valuing the business level outcomes of design through a range of design tools and activities within the participating company. Through a 12 month action research program, staff interviews and a reflective journal were utilised as data collection techniques to assess the successfulness of the approaches used during this project. It was found that, through the use of both successful and unsuccessful approaches, the catalyst achieved two key outcomes within the firm: 1) Improvements in the firm’s ability to challenge internal assumptions and standard practices; and 2) the creation of an informed and accurate awareness of company and industry issues. Approaches that made a higher impact of the firm were deemed successful, and were generally relatable to the task at hand, as perceived by employees. Additionally, the sequence in which the approaches were utilised was found to have a direct influence on their successfulness. Learnings from this research will assist future catalysts to facilitate a design-led transformation within a manufacturing SME through the use of design tools and activities with greater effectiveness.

Strategic renewal through design led innovation : findings from embedded practice

Strategic Renewal has been the subject of research in large organisations but has received relatively little attention in small and medium enterprises. Using case study examples of small and medium manufacturing firms, this paper presents the findings from a longitudinal action research project where participating companies explored design led innovation processes to find new ways to renew their businesses. Specifically our findings indicate that when designers act as innovation catalysts in embedded longitudinal action research, SMEs engage in strategic renewal, gain a deeper appreciation of their customers, become more aware of the value proposition of the company and engage in new practices to improve their competitive advantage.

From certificate chasing to genuine engagement : the contribution of curriculum design to students' career intent in a subfield

Many students enter business degrees without a defined career goal beyond working in the business world and adopt a scattergun approach to employability by accumulating certifications accessed through individual subjects. Yet, space and time limitations commonly prevent extended exposure to rewarding and interesting career subfields within main specialisations. This case study draws on student feedback collected over three years exploring students’ career interest following an elective human resource development subject in the final stage of a human resources major. Project-based curriculum provided students with scaffolded learning while undertaking key multiphase human resource development tasks. Subsequently, students reported human resource development career interest and intent, attributed to more realistic appreciation of human resource development’s activities, scope, and values. The paper makes an important contribution illustrating how curriculum design can transform instrumentalism into logically, emotionally, and intuitively based career engagement. Further, human resource development is a study and career area little mentioned in higher education or careers literature.

Teaching manufacturing engineering at tertiary institutions in conjunction with engineering design and engineering materials

Tertiary institutions now face serious challenges. Modern industry requires engineering graduates with strong knowledge of modern technologies, highly practical focus, management skills, ability to work individually and in a team, understanding of environmental issues and many other skills and graduate attributes. Institutions in the tertiary sector change courses and modify curriculum to reflect challenges of the modern industry and make engineering graduates better prepared for the “real world”. Queensland University of Technology in the recent years introduced an innovative structure of engineering courses with a common core for Bachelor of Engineering Mechanical, Infomechatronics and Medical, where manufacturing is taught in conjunction with engineering design and engineering materials. In this paper we discuss the innovative curriculum structure, teaching and learning approaches of coherent delivery of manufacturing in conjunction with engineering design and

Mental health facility design: The case for person-centred care

There is a schism between a growing chorus for person-centred models of care and the prevalent paradigms for the design of mental health facilities. This argument proposes that architectural solutions have traditionally been geared around staff-centred concerns like ease of patient management. It suggests that the demands for person-centred models of care are important because evidence suggests that the physical environment is a causal factor in mental illness, and that even minor concessions towards person-centred models of care consistently exert a disproportionate and sustained positive influence on the behaviour of mental health patients. While the traditional mental health unit layout is unsatisfactory for person-centred care and effective recovery, other approaches that have been well tested and found to be effective is described along with a statement about subtle details that will improve facilities for all users.