Macroalgae and commercial macroalgal polysaccharides as potential functional ingredients in muscle foods

Ulva rigida (UR) and Palmaria palmata (PP) were included in farmed Atlantic salmon diets at levels of 0-15% for 19 and 16 weeks, respectively. Quality and shelf-life parameters of salmon fillets stored in modified atmosphere packs (MAP) (60% N2 : 40% CO2) at 4ºC were compared to controls fed astaxanthin. Salmon fillets were enhanced with a yellow/orange colour. Proximate composition, pH and lipid oxidation were unaffected by dietary UR and PP. Salmon fed 5% UR and 5-15% PP did not influence sensory descriptors (texture, odour, oxidation flavour and overall acceptability) of cooked salmon fillets. Pig diets were supplemented with commercial wet- and spray-dried macroalgal (Laminaria digitata) polysaccharide extracts containing laminarin (L, 500 mg/kg feed) and fucoidan (F, 420 mg/kg feed) (L/F-WS, L/F-SD) for 3 weeks and quality and shelf-life parameters of fresh pork steaks (longissimus thoracis et lumborum) stored in MAP (80% O2 : 20% CO2) were examined. Level (450 or 900 mg L and F/kg feed) and duration (3 or 6 weeks) of dietary L/F-WS and mechanisms of antioxidant activities in pork were investigated. L/F-WS reduced (p < 0.05) lipid oxidation and lowered levels of saturated fatty acids in fresh pork after 3 weeks feeding. L/F-SD was added directly to mince pork (0.01 - 0.5%) and quality and shelf-life parameters of fresh pork patties stored in MAP (80% O2 : 20% CO2) were assessed. Direct addition of the L/F-SD increased levels of lipid oxidation and decreased surface redness (a* values) of fresh pork patties. Lipid oxidation was reduced in cooked patties due to the formation of Maillard reaction products. Cooked pork patties containing L/F-SD were subjected to an in vitro digestion and a cellular transwell model to confirm bioaccessibility and uptake of antioxidant compounds. In mechanistic studies, fucoidan demonstrated antiand pro-oxidant activities on muscle lipids and oxymyoglobin, respectively.

Average-case analysis of power consumption in embedded systems

Power efficiency is one of the most important constraints in the design of embedded systems since such systems are generally driven by batteries with limited energy budget or restricted power supply. In every embedded system, there are one or more processor cores to run the software and interact with the other hardware components of the system. The power consumption of the processor core(s) has an important impact on the total power dissipated in the system. Hence, the processor power optimization is crucial in satisfying the power consumption constraints, and developing low-power embedded systems. A key aspect of research in processor power optimization and management is “power estimation”. Having a fast and accurate method for processor power estimation at design time helps the designer to explore a large space of design possibilities, to make the optimal choices for developing a power efficient processor. Likewise, understanding the processor power dissipation behaviour of a specific software/application is the key for choosing appropriate algorithms in order to write power efficient software. Simulation-based methods for measuring the processor power achieve very high accuracy, but are available only late in the design process, and are often quite slow. Therefore, the need has arisen for faster, higher-level power prediction methods that allow the system designer to explore many alternatives for developing powerefficient hardware and software. The aim of this thesis is to present fast and high-level power models for the prediction of processor power consumption. Power predictability in this work is achieved in two ways: first, using a design method to develop power predictable circuits; second, analysing the power of the functions in the code which repeat during execution, then building the power model based on average number of repetitions. In the first case, a design method called Asynchronous Charge Sharing Logic (ACSL) is used to implement the Arithmetic Logic Unit (ALU) for the 8051 microcontroller. The ACSL circuits are power predictable due to the independency of their power consumption to the input data. Based on this property, a fast prediction method is presented to estimate the power of ALU by analysing the software program, and extracting the number of ALU-related instructions. This method achieves less than 1% error in power estimation and more than 100 times speedup in comparison to conventional simulation-based methods. In the second case, an average-case processor energy model is developed for the Insertion sort algorithm based on the number of comparisons that take place in the execution of the algorithm. The average number of comparisons is calculated using a high level methodology called MOdular Quantitative Analysis (MOQA). The parameters of the energy model are measured for the LEON3 processor core, but the model is general and can be used for any processor. The model has been validated through the power measurement experiments, and offers high accuracy and orders of magnitude speedup over the simulation-based method.

The impact of whey protein consumption and exercise on the composition and diversity of the gut microbiota: a high through-put DNA sequencing approach

Advances in culture independent technologies over the last decade have highlighted the pivotal role which the gut microbiota plays in maintaining human health. Conversely, perturbations to the composition or actions of the ‘normal/functioning’ microbiota have been frequently associated with the pathogenesis of several disease states. Therefore the selective modulation of enteric microbial communities represents a viable target for the development of novel treatments for such diseases. Notably, while bovine whey proteins and exercise have been shown to positively influence several physiological processes, such as energy balance, their effect on the composition or functionality of the gut microbiota remains largely unknown. In this thesis, a variety of ex vivo, murine and human models are used in conjunction with high-throughput DNA sequencing-based analysis to provide valuable and novel insights into the impact of both whey proteins and exercise on enteric microbial communities. Overall the results presented in this thesis highlight that the consumption both whey protein isolate (WPI), and individual component proteins of whey such as bovine serum albumin (BSA) and lactoferrin, reduce high fat diet associated body weight gain and are associated with beneficial alterations within the murine gut microbiota. Although the impact of exercise on enteric microbial communities remains less clear, it may be that longer term investigations are required for the true effect of exercise on the gut microbiota to be fully elucidated.

An in-depth characterisation of neonatal seizures by early continuous video-EEG analysis

Introduction Seizures are harmful to the neonatal brain; this compels many clinicians and researchers to persevere further in optimizing every aspects of managing neonatal seizures. Aims To delineate the seizure profile between non-cooled versus cooled neonates with hypoxic-ischaemic encephalopathy (HIE), in neonates with stroke, the response of seizure burden to phenobarbitone and to quantify the degree of electroclinical dissociation (ECD) of seizures. Methods The multichannel video-EEG was used in this research study as the gold standard to detect seizures, allowing accurate quantification of seizure burden to be ascertained in term neonates. The entire EEG recording for each neonate was independently reviewed by at least 1 experienced neurophysiologist. Data were expressed in medians and interquartile ranges. Linear mixed models results were presented as mean (95% confidence interval); p values <0.05 were deemed as significant. Results Seizure burden in cooled neonates was lower than in non-cooled neonates [60(39-224) vs 203(141-406) minutes; p=0.027]. Seizure burden was reduced in cooled neonates with moderate HIE [49(26-89) vs 162(97-262) minutes; p=0.020] when compared with severe HIE. In neonates with stroke, the background pattern showed suppression over the infarcted side and seizures demonstrated a characteristic pattern. Compared with 10 mg/kg, phenobarbitone doses at 20 mg/kg reduced seizure burden (p=0.004). Seizure burden was reduced within 1 hour of phenobarbitone administration [mean (95% confidence interval): -14(-20 to -8) minutes/hour; p<0.001], but seizures returned to pre-treatment levels within 4 hours (p=0.064). The ECD index in cooled, non-cooled neonates with HIE, stroke and in neonates with other diagnoses were 88%, 94%, 64% and 75% respectively. Conclusions Further research exploring the treatment effects on seizure burden in the neonatal brain is required. A change to our current treatment strategy is warranted as we continue to strive for more effective seizure control, anchored with use of the multichannel EEG as the surveillance tool.

Development and characterisation of solution processed vanadium oxide and transparent metal oxide thin films

Metal oxide thin films are important for modern electronic devices ranging from thin film transistors to photovoltaics and functional optical coatings. Solution processed techniques allow for thin films to be rapidly deposited over a range of surfaces without the extensive processing of comparative vapour or physical deposition methods. The production of thin films of vanadium oxide prepared through dip-coating was developed enabling a greater understanding of the thin film formation. Mechanisms of depositing improved large area uniform coverage on a number of technologically relevant substrates were examined. The fundamental mechanism for polymer-assisted deposition in improving thin film surface smoothness and long range order has been delivered. Different methods were employed for adapting the alkoxide based dip-coating technique to produce a variety of amorphous and crystalline vanadium oxide based thin films. Using a wide range of material, spectroscopic and optical measurement techniques the morphology, structure and optoelectronic properties of the thin films were studied. The formation of pinholes on the surface of the thin films, due to dewetting and spinodal effects, was inhibited using the polymer assisted deposition technique. Uniform thin films with sub 50 nm thicknesses were deposited on a variety of substrates controlled through alterations to the solvent-alkoxide dilution ratios and employing polymer assisted deposition techniques. The effects of polymer assisted deposition altered the crystallized VO thin films from a granular surface structure to a polycrystalline structure composed of high density small in-plane grains. The formation of transparent VO based thin film through Si and Na substrate mediated diffusion highlighted new methods for material formation and doping.

Development of an intervention to support medication management in patients with multimorbidity in primary care

The overarching aim of this thesis was to develop an intervention to support patient-centred prescribing in the context of multimorbidity in primary care. Methods A range of research methods were used to address different components of the Medical Research Council, UK (MRC) guidance on the development and evaluation of complex interventions in health care. The existing evidence on GPs’ perceptions of the management of multimorbidity was systematically reviewed. In qualitative interviews, chart-stimulated recall was used to explore the challenges experienced by GPs when prescribing for multimorbid patients. In a cross-sectional study, the psychosocial issues that complicate the management of multimorbidity were examined. To develop the complex intervention, the Behaviour Change Wheel (BCW) was used to integrate behavioural theory with the findings of these three studies. A feasibility study of the new intervention was then conducted with GPs. Results The systematic review revealed four domains of clinical practice where GPs experienced difficulties in multimorbidity. The qualitative interview study showed that GPs responded to these difficulties by ‘satisficing’. In multimorbid patients perceived as stable, GPs preferred to ‘maintain the status quo’ rather than actively change medications. In the cross-sectional study, the significant association between multimorbidity and negative psychosocial factors was shown. These findings informed the development of the ‘Multimorbidity Collaborative Medication Review and Decision-making’ (MY COMRADE) intervention. The intervention involves peer support: two GPs review the medications prescribed to a complex multimorbid patient together. In the feasibility study, GPs reported that the intervention was appropriate for the context of general practice; was widely applicable to their patients with multimorbidity; and recommendations for optimising medications arose from all collaborative reviews. Conclusion Applying theory to empirical data has led to an intervention that is implementable in clinical practice, and has the potential to positively change GPs’ behaviour in the management of medications for patients with multimorbidity.

Leadership in the community sector: promoting collaboration and social change in Belfast

Community development is centrally concerned with people in communities working together to achieve a common goal, that is, to collaborate, whether within local geographical communities, in communities of shared interests or among groups sharing a common identity. Its overarching goal is one of progressive transformational social change. As Belfast transitions from a conflict to a post-conflict society, there is a need for greater, more effective work at local community level in order to address a range of ongoing social and economic issues facing communities, including high levels of disadvantage and division. Given the significance of leadership in building effective collaboration and the centrality of collaboration for community development, it is important to understand how leadership is currently enacted and what kinds of leadership are required to support communities to collaborate effectively to bring about social change. This thesis thus centers on the kind of leadership practised and required to support collaboration for social change within the community sector in Belfast, a city that contains an estimated 28% of the total number of community and voluntary sector (CVS) organisations in Northern Ireland (Northern Ireland Council for Voluntary Action, 2012). Through a series of qualitative, in-depth interviews with people playing leadership roles in local communities, the study critically explores and analyses their experiences and perceptions in relation to leadership and collaboration. Community development in Belfast today is practised within a wider context of neoliberal policies, characterised by austerity and public spending cuts. Whilst not the only influencing factor, this context has had a particular and profound impact on the nature and role of community development practised, and on the kind of leadership enacted within it. The space for reflection and transformative action appears to be shrinking as the contraction of resources to support community development in local communities continues unabated. Those playing leadership roles increasingly find themselves compelled to spend time seeking resources and managing complex funding arrangements rather than focusing on the social change dimensions of their work. Collaboration as promoted by the state seems to have become an instrumental tactic used to implement its austerity measures and curtail the potential of the community sector. Despite this, local leaders are driving initiatives that attempt to push back, helping the sector refocus on its transformational goals of social change. To do this requires support. Those playing leadership roles require resources, including time, to encourage and enable communities to reconnect with the purpose and underpinning values of community development. Leaders also need support to develop and promote new, progressive narratives and visions and pursue these through building collaboration and solidarity.

Biomethane production from macroalgae

Irish brown seaweeds have been identified as a potential bio-resource with potentially high specific methane yields. Anaerobic digestion is deemed the most feasible technology due to its commercial viability for handling such wet feedstock. However, the biomethane potential of seaweed is highly dependent on its chemical composition which can vary by species type, cultivation method, and time of harvest. This study aims to investigate and optimize the process for the production of biomethane from Irish brown seaweeds focusing on the key technology bottlenecks including for seaweed characterization, biomethane potential assessment, optimization of long-term anaerobic digestion and suitable pre-treatment technologies to enhance potential gas yields. Laminaria digitata and Ascophyllum nodosum were tested for seasonal variation. From the characterization and batch digestion of L. digitata, August was found to be the optimal month for harvest due to high organic matter content, low level of ash and ultimately highest biomethane yield. The specific methane yield of 53 m3 CH4 t-1 wwt in August was 4.5 times higher than the yield in December (12 m3 CH4 t-1 wwt), with ash content the key factor in seasonal variation. For A. nodosum, the optimal harvest month was October with polyphenol content found to be a more influential factor than ash. The gross energy yields from both species were evaluated in the range of 116-200 GJ ha-1 yr-1. Continuous digestion trials were subsequently designed for S. latissima and L. digitata to optimize the key digestion parameters. Results from mono-digestion and co-digestion with dairy slurry revealed that both seaweeds could be digested at maximum biomethane efficiency to a loading rate of 4 kg VS m-3 d-1. Accumulation of salt in the digesters was a concern for long term digestion and it was reasoned that suitable pretreatment may be required prior to digestion. Various pre-treatments were subsequently tested on L. digitata to enhance the gas yield. It was found that maceration after hot water washing yielded 25% more specific methane and up to 54% salt removal as compared to untreated L. digitata. The experiments undertaken aim to assist in providing a basic guideline for feasible design and operation of seaweed digesters in Ireland.

Economic evaluations of clinical pharmacy services in Ireland, 2007-2015

Introduction The concept of this thesis was driven by stagnation within the Irish healthcare system. Multiple reports from pharmacy organisations had outlined possible future directions for the profession but progress was minimal, especially in comparison with other countries. The author’s directive was to evaluate the economic impact of a series of clinical pharmacy services (CPS) in hospital and community settings. Methods A systematic review of economic evaluations of clinical pharmacy services in hospital patients was undertaken to gain insight into recent research in the field. Eligible studies were evaluated using the Consolidated Health Economic Evaluation Reporting Standards (CHEERS), to establish the quality, consistency and transparency of relevant research. A retrospective analysis of an internal hospital pharmacy interventions database was conducted. A method first described by Nesbit et al. was implemented to estimate the level of cost avoidance achieved. A cost-effectiveness analysis based on data from a randomised controlled trial of a pharmacist-supervised patient self-testing (PST) of warfarin therapy is presented. Outcome measure was the incremental cost associated with six months of intervention management. A similar cost-effectiveness analysis based on previously published RCT data was used to evaluate a novel structured pharmacist review of medication in older hospitalised patients. Cost-effectiveness analysis was presented in the form of an incremental cost-effectiveness ratio (ICER). An ICER is an additional cost per unit effect, in the case of this study, the cost of preventing an additional non-trivial ADR in hospital. A method described by Preaud et al. was adapted to estimate the clinical and economic benefit gained from vaccination of patients by a community pharmacist in Ireland in 2013/14. Sample demographic data was obtained from a national chain of community pharmacies and applied to overall national vaccination data. Results Systematic review identified twenty studies which were eligible for inclusion. Overall, pharmacist interventions had a positive impact on hospital budgets. Only three studies (15%) were deemed to be “good-quality” studies. No ‘novel’ clinical pharmacist intervention was identified during the course of this review. Analysis of internal hospital database identified 4,257 interventions documented on 2,147 individual patients over a 12 month period. Substantial cost avoidance of €710,000 was generated over a 1 year period from the perspective of the health care provider. Mean cost avoidance of €166 per intervention was generated. The cost of providing these interventions was €82,000. Substantial net cost-benefits of €626,279 and a cost-benefit ratio of 8.64 : 1 were generated based on this evaluation of pharmacist interventions. Results from an evaluation of a novel pharmacist-led form of warfarin management indicated indicated that on a per patient basis, PST was slightly more expensive than established anticoagulant management. On a per patient basis over a six month period, PST resulted in an incremental cost of €59.08 in comparison with routine care. Overall cost of managing a patient through pharmacist-supervised PST for a six month period is €226.45. However, for this increase in cost a clinically significant improvement in care was provided. Patients achieved a significantly higher time in therapeutic range during the PST arm in comparison with routine care, (72 ± 19.7% vs 59 ± 13.5%). Difference in overall cost was minimal and PST was the dominant strategy in some scenarios examined during sensitivity analysis. Structured pharmacist review of medication was determined to be dominant in comparison to usual pharmaceutical care. Even if the healthcare payer was unwilling to pay any money for the prevention of an ADR, the intervention strategy is still likely to be cost-effective (probability of being determined cost-effective = 0.707). Implementation of pharmacist-led influenza vaccination has resulted in substantial clinical and economic benefits to the healthcare system. The majority of patients (64.9%) who availed of this service had identifiable influenza-related risk factors. Of patients with influenza-related risk factors, age ≥65 year was the most commonly cited risk factor. Pharmacist vaccination services averted a total of 848 influenza cases across all age groups during the 2013/2014 influenza season. Due to receipt of vaccination in a pharmacy setting, 444 influenza-related GP visits were prevented. In terms of more serious influenza-associated events, 11 hospitalisations and five influenza-related deaths were averted. Costs averted were approximately €305,000. These were principally wider societal-related costs associated with lost productivity. Conclusion Overall, clinical pharmacy services are adding value to the Irish healthcare system in both hospital and community settings, but provision of additional funding for new services would enable them to offer a great deal more.

Comthóth Lóegairi co Cretim ocus a Aided: Eagrán maille le hanailís liteartha agus teanga

Is scrúdú ar théacs amháin, Comthóth Lóegairi co Cretim ocus a Aided (CLcC), a chaomhnaítear i lámhscríbhinn amháin, Lebor na hUidre (LU), atá sa tráchtas seo. Bíodh is gurb é LU an lámhscríbhinn Ghaelach is sine a chaomhnaíonn scéalta leanúnacha i nGaeilge, agus gur ábhar staidéir ar leith i ngort na Gaeilge agus na Ceiltise é dá réir, níor scrúdaíodh CLcC as féin mar earra litríochta fós, ná ní dhearnadh mionscrúdú ar an teanga ann ach chomh beag. Ceapadh gur mhithid an téacs a mheas ar na cúiseanna sin. Roinntear an tráchtas ina dhá chuid, mar atá: (a) cuid a haon, a chuireann síos ar chomhthéacs na lámhscríbhinne agus ar cheisteanna a bhaineann lena lucht scríofa, chomh maith le hanailís liteartha ar théamaí a luaitear sa téacs féin. Déantar ceist an rangaithe a phlé chomh maith, is é sin, conas is ceart rangú a dhéanamh ar CLcC; (b) cuid a dó, is eagrán agus aistriúchán den téacs atá inti, chomh maith le nótaí teanga a scrúdaíonn gnéithe suntasacha den teanga, agus gluais. An dá shórt anailíse a chuirtear chun cinn i rith an tráchtais, .i. an scrúdú liteartha agus an t-iniúchadh ar an teanga, déantar iad a shuíomh i gcomhthéacs LU trí chéile oiread agus is féidir. Féachann an cur chuige seo le taispeáint gur de dhlúth na lámhscríbhinne féin na téamaí (mar shampla creideamh, cumhacht, ríogacht) is bun le CLcC, agus gur sampla an-spéisiúil de thoisí teanga LU an téacs seo, óir léiríonn sé caomhnú ábhar ón tSean-Ghaeilge chomh maith le forbairtí teanga a bhaineann le ré na Meán-Ghaeilge. Sna nótaí teanga, leis, cuirtear samplaí as lámhscríbhinní comhaimseartha eile san áireamh, chomh maith le foinsí níos sine ná sin, le bonn a chur faoin áitiú a dhéantar ar aois na teanga in CLcC.

Management of safety climate and the psychosocial work environment – new challenges for occupational health and safety professionals?

Introduction: The work environment and Occupational Health and Safety (OHS) practice have changed over the last number of years. A holistic OHS approach has been recommended by the authorities in this field (e.g. World Health Organisation (WHO), European Agency for Safety and Health at Work (EU-OSHA) and the International Labour Organisation (ILO)). This involves a unified action engaging elements of the physical and psychosocial workplace with greater focus on prevention and promotion of health and wellbeing. The health and safety practitioner (HSP) has been recognised as one of the main agents for implementation of OHS. Within an organisation they act as a leader of change and a professional who shapes health and safety while safeguarding the wellbeing of individuals at work. Additionally, safety climate (SC) has been developed as an essential concept for OHS of an organisation, its productivity and the wellbeing of its workforce. Scholars and practitioners have recognised the great need for further empirical evidence on the HSP’s role in a changing work environment that increasingly requires the use of preventative measures and the assessment and management of psychosocial work-related risks. This doctoral research brings together the different concepts used in OHS and Public Health including SC, Psychosocial workplace risks, Health Promotion and OHS performance. The associations between these concepts are analysed bearing in mind the WHO Healthy Workplace Framework and three of its main components (physical and psychosocial work environment and health resources). This thesis aims to establish a deeper understanding of the practice and management of OHS in Ireland and the UK, exploring the role of HSPs (employed in diverse sectors of activity) and of SC in the OHS of organisations. Methods: One systematic review and three cross-sectional research studies were performed. The systematic review focussed on the evidence compiled for the association of SC with accidents and injuries at work, clarifying this concept’s definition and its most relevant dimensions. The second article (chapter 3) explored the association of SC with accidents and injuries in a sample of workers (n=367) from a pharmaceutical industry and compared permanent with non-permanent workers. Associations of safety climate with employment status and with self-reported occupational accidents/injuries were studied through logistic regression modelling. The third and fourth papers in this thesis investigated the main tasks performed by HSPs, their perceptions of SC, health climate (HC), psychosocial risk factors and health outcomes as well as work efficacy. Validated questionnaires were applied to a sample of HSPs in Ireland and UK, members of the Institute of Occupational Safety and Health (n=1444). Chi-square analysis and logistic regression were used to assess the association between HSPs work characteristics and their involvement in the management of Psychosocial Risk Factors, Safety Culture and Health Promotion (paper 3). Multiple linear regression analysis was used to determine the association between SC, HC, psychosocial risk factors and health outcomes (general health and mental wellbeing) and self-efficacy. Results: As shown in the systematic review, scientific evidence is unable to establish the widely assumed causal link between SC and accidents and injuries. Nevertheless, the current results suggested that, particularly, the organisational dimensions of SC were associated with accidents and injuries and that SC is linked to health, wellbeing and safety performance in the organisation. According to the present research, contingent workers had lower SC perceptions but showed a lower accident/injury rate than their permanent colleagues. The associations of safety climate with accidents/injuries had opposite directions for the two types of workers as for permanent employees it showed an inverse relationship while for temporary workers, although not significant, a positive association was found. This thesis’ findings showed that HSPs are, to a very small degree, included in activities related to psychosocial risk management and assessment, to a moderate degree, involved in HP activities and, to a large degree, engaged in the management of safety culture in organisations. In the final research study, SC and HC were linked to job demands-control-support (JDCS), health, wellbeing and efficacy. JDCS were also associated with all three outcomes under study. Results also showed the contribution of psychosocial risk factors to the association of SC and HC with all the studied outcomes. These associations had rarely been recorded previously. Discussion & Conclusions: Health and safety climate showed a significant association with health, wellbeing and efficacy - a relationship which affects working conditions and the health and wellbeing of the workforce. This demonstrates the link of both SC and HC with the OHS and the general strength or viability of organisations. A division was noticed between the area of “health” and “safety” in the workplace and in the approach to the physical and psychosocial work environment. These findings highlighted the current challenge in ensuring a holistic and multidisciplinary approach for prevention of hazards and for an integrated OHS management. HSPs have shown to be a pivotal agent in the shaping and development of OHS in organisations. However, as observed in this thesis, the role of these professionals is still far from the recommended involvement in the management of psychosocial risk factors and could have a more complete engagement in other areas of OHS such as health promotion. Additionally, a strong culture of health and safety with supportive management and buy-in from all stakeholders is essential to achieve the ideal unified and prevention-focussed approach to OHS as recommended by the WHO, EU-OSHA and ILO.

Human-Computer interaction methodologies applied in the evaluation of haptic digital musical instruments

Recent developments in interactive technologies have seen major changes in the manner in which artists, performers, and creative individuals interact with digital music technology; this is due to the increasing variety of interactive technologies that are readily available today. Digital Musical Instruments (DMIs) present musicians with performance challenges that are unique to this form of computer music. One of the most significant deviations from conventional acoustic musical instruments is the level of physical feedback conveyed by the instrument to the user. Currently, new interfaces for musical expression are not designed to be as physically communicative as acoustic instruments. Specifically, DMIs are often void of haptic feedback and therefore lack the ability to impart important performance information to the user. Moreover, there currently is no standardised way to measure the effect of this lack of physical feedback. Best practice would expect that there should be a set of methods to effectively, repeatedly, and quantifiably evaluate the functionality, usability, and user experience of DMIs. Earlier theoretical and technological applications of haptics have tried to address device performance issues associated with the lack of feedback in DMI designs and it has been argued that the level of haptic feedback presented to a user can significantly affect the user’s overall emotive feeling towards a musical device. The outcome of the investigations contained within this thesis are intended to inform new haptic interface.

Reflective judgment vs. investigation of things – a comparative study of Kant and Zhu Xi

This thesis is devoted to studying two historical philosophical events that happened in the West and the East. A metaphysical crisis stimulated Kant’s writings during his late critical period towards the notion of the supersensible. It further motivated a methodological shift and his coining of reflective judgment, which eventually brought about a systemic unfolding of his critical philosophy via Kantian moral teleology. Zhu Xi and his Neo-Confucian contemporaries confronted a transformed intellectual landscape resulting from the Neo-Daoist and Buddhist discourses of “what is beyond the form”. The revival of Confucianism required a method in order to relocate the formless Dao back into daily life and to reconstruct a meta-ethical foundation within a social context. This led to the Neo-Confucian recasting of “investigation of things” from The Great Learning via complex hermeneutic operations. By the respective investigation on, as well as the comparative analysis of the two events, I reveal the convergence and incommensurability between the two distinct cultural traditions concerning the metaphysical quests, the mechanism of intellectual development, and moral teleology, so as to capture the intrinsic characteristics of philosophical research in general.

The actinin family of actin crosslinking proteins: natural functions and potential applications in synthetic biology

Actinin and spectrin proteins are members of the Spectrin Family of Actin Crosslinking Proteins. The importance of these proteins in the cytoskeleton is demonstrated by the fact that they are common targets for disease causing mutations. In their most prominent roles, actinin and spectrin are responsible for stabilising and maintaining the muscle architecture during contraction, and providing shape and elasticity to the red blood cell in circulation, respectively. To carry out such roles, actinin and spectrin must possess important mechanical and physical properties. These attributes are desirable when choosing a building block for protein-based nanoconstruction. In this study, I assess the contribution of several disease-associated mutations in the actinin-1 actin binding domain that have recently been linked to a rare platelet disorder, congenital macrothrombocytopenia. I investigate the suitability of both actinin and spectrin proteins as potential building blocks for nanoscale structures, and I evaluate a fusion-based assembly strategy to bring about self-assembly of protein nanostructures. I report that the actinin-1 mutant proteins display increased actin binding compared to WT actinin-1 proteins. I find that both actinin and spectrin proteins exhibit enormous potential as nano-building blocks in terms of their stability and ability to self-assemble, and I successfully design and create homodimeric and heterodimeric bivalent building blocks using the fusion-based assembly strategy. Overall, this study has gathered helpful information that will contribute to furthering the advancement of actinin and spectrin knowledge in terms of their natural functions, and potential unnatural functions in protein nanotechnology.

Modelling and predictive control techniques for building heating systems

Model predictive control (MPC) has often been referred to in literature as a potential method for more efficient control of building heating systems. Though a significant performance improvement can be achieved with an MPC strategy, the complexity introduced to the commissioning of the system is often prohibitive. Models are required which can capture the thermodynamic properties of the building with sufficient accuracy for meaningful predictions to be made. Furthermore, a large number of tuning weights may need to be determined to achieve a desired performance. For MPC to become a practicable alternative, these issues must be addressed. Acknowledging the impact of the external environment as well as the interaction of occupants on the thermal behaviour of the building, in this work, techniques have been developed for deriving building models from data in which large, unmeasured disturbances are present. A spatio-temporal filtering process was introduced to determine estimates of the disturbances from measured data, which were then incorporated with metaheuristic search techniques to derive high-order simulation models, capable of replicating the thermal dynamics of a building. While a high-order simulation model allowed for control strategies to be analysed and compared, low-order models were required for use within the MPC strategy itself. The disturbance estimation techniques were adapted for use with system-identification methods to derive such models. MPC formulations were then derived to enable a more straightforward commissioning process and implemented in a validated simulation platform. A prioritised-objective strategy was developed which allowed for the tuning parameters typically associated with an MPC cost function to be omitted from the formulation by separation of the conflicting requirements of comfort satisfaction and energy reduction within a lexicographic framework. The improved ability of the formulation to be set-up and reconfigured in faulted conditions was shown.