Surface contact and design of fibrillar 'friction pads' in stick insects (Carausius morosus): mechanisms for large friction coefficients and negligible adhesion.

Many stick insects and mantophasmids possess tarsal 'heel pads' (euplantulae) covered by arrays of conical, micrometre-sized hairs (acanthae). These pads are used mainly under compression; they respond to load with increasing shear resistance, and show negligible adhesion. Reflected-light microscopy in stick insects (Carausius morosus) revealed that the contact area of 'heel pads' changes with normal load on three hierarchical levels. First, loading brought larger areas of the convex pads into contact. Second, loading increased the density of acanthae in contact. Third, higher loads changed the shape of individual hair contacts gradually from circular (tip contact) to elongated (side contact). The resulting increase in real contact area can explain the load dependence of friction, indicating a constant shear stress between acanthae and substrate. As the euplantula contact area is negligible for small loads (similar to hard materials), but increases sharply with load (resembling soft materials), these pads show high friction coefficients despite little adhesion. This property appears essential for the pads' use in locomotion. Several morphological characteristics of hairy friction pads are in apparent contrast to hairy pads used for adhesion, highlighting key adaptations for both pad types. Our results are relevant for the design of fibrillar structures with high friction coefficients but small adhesion.

Redescription of Difflugia tuberspinifera Hu, Shen, Gu et Gong, 1997 (Protozoa : Rhizopoda : Arcellinida : Difflugiidae) from China

The freshwater testate amoeba Difflugia tuberspinifera Hu et al. 1997 collected from pond and lake in China, is investigated by light and scanning electron microscopy. This little known taxon is redescribed and its morphology, biometry and ecology are supplied. After carefully comparison with other six similar species including Difflugia bartosi Stepanek, D. corona Wallich, D. corona cashi Deflandre, D. corona tuberculata Vucetich, D. muriformis Gauthier-Lievre et Thomas and Netzelia tuberculata (Wallich) Netzal we believe that the sub-spherical to spherical shell, the mulberry-shaped appearance, the 7-10 apertural tooth-like structures, the short collar and the conical spines numbering from 4 to 8 at the upper equatorial region in D. tuberspinifera set it apart from other species. Besides, statistical analysis indicates that D. tuberspinifera is a size-monomorphic species characterized by a main-size class and a small size range and the shell height is significant correlated with other morphometric characters at p < 0.05 excepting the number of aperture tooth-like structures and the number of spines. Moreover, D. tuberspinifera inhabits not only lotic but also lentic environment.

Marine Phallodrilinae (Oligochaeta, Tubificidae)of Hainan Island in southern China

Six species of Phallodrilinae are reported from Hainan Island in southern China. The mesopsammic Aktedrilus yiboi sp. nov. is new to science. It is characterized by a combination of (1) small, straight, conical, strongly cuticularized penis sheaths, (2) posterior prostate glands being associated with the most ectal parts of the atria, and (3) small spermathecal ampulla. Bathydrilus ampliductus Erseus, 1997 is recorded for the first time since it was originally described from Australia's Northern Territory.

Rashba electron transport in one-dimensional quantum waveguides

The properties of Rashba wave function in the planar one-dimensional waveguide are studied, and the following results are obtained. Due to the Rashba effect, the plane waves of electron with the energy E divide into two kinds of waves with the wave vectors k(1)=k(0)+k(delta) and k(2)=k(0)-k(delta), where k(delta) is proportional to the Rashba coefficient, and their spin orientations are +pi/2 (spin up) and -pi/2 (spin down) with respect to the circuit, respectively. If there is gate or ferromagnetic contact in the circuit, the Rashba wave function becomes standing wave form exp(+/- ik(delta)l)sin[k(0)(l-L)], where L is the position coordinate of the gate or contact. Unlike the electron without considering the spin, the phase of the Rashba plane or standing wave function depends on the direction angle theta of the circuit. The travel velocity of the Rashba waves with the wave vector k(1) or k(2) are the same hk(0)/m*. The boundary conditions of the Rashba wave functions at the intersection of circuits are given from the continuity of wave functions and the conservation of current density. Using the boundary conditions of Rashba wave functions we study the transmission and reflection probabilities of Rashba electron moving in several structures, and find the interference effects of the two Rashba waves with different wave vectors caused by ferromagnetic contact or the gate. Lastly we derive the general theory of multiple branches structure. The theory can be used to design various spin polarized devices.

One-dimensional quantum waveguide theory of Rashba electrons

The ballistic spin transport in one-dimensional waveguides with the Rashba effect is studied. Due to the Rashba effect, there are two electron states with different wave vectors for the same energy. The wave functions of two Rashba electron states are derived, and it is found that their phase depend on the direction of the circuit and the spin directions of two states are perpendicular to the circuit, with the +pi/2 and -pi/2 angles, respectively. The boundary conditions of the wave functions and their derivatives at the intersection of circuits are given, which can be used to investigate the waveguide transport properties of Rashba spin electron in circuits of any shape and structure. The eigenstates of the closed circular and square loops are studied by using the transfer matrix method. The transfer matrix M(E) of a circular arc is obtained by dividing the circular arc into N segments and multiplying the transfer matrix of each straight segment. The energies of eigenstates in the closed loop are obtained by solving the equation det[M(E)-I]=0. For the circular ring, the eigenenergies obtained with this method are in agreement with those obtained by solving the Schrodinger equation. For the square loop, the analytic formula of the eigenenergies is obtained first The transport properties of the AB ring and AB square loop and double square loop are studied using the boundary conditions and the transfer matrix method In the case of no magnetic field, the zero points of the reflection coefficients are just the energies of eigenstates in closed loops. In the case of magnetic field, the transmission and reflection coefficients all oscillate with the magnetic field; the oscillating period is Phi(m)=hc/e, independent of the shape of the loop, and Phi(m) is the magnetic flux through the loop. For the double loop the oscillating period is Phi(m)=hc/2e, in agreement with the experimental result. At last, we compared our method with Koga's experiment. (C) 2009 American Institute of Physics. [doi: 10.1063/1.3253752]

The strain distributions and carrier's confining potentials of self-organized InAs/GaAs quantum dot

On the basis of the finite element approach, we systematically investigated the strain field distribution of conical-shaped InAs/GaAs self-organized quantum dot using the two-dimensional axis-symmetric model. The normal strain, the hydrostatic strain and the biaxial strain components along the center axis path of the quantum dots are analyzed. The dependence of these strain components on volume, height-over-base ratio and cap layer (covered by cap layer or uncovered quantum dot) is investigated for the quantum grown on the (001) substrate. The dependence of the carriers' confining potentials on the three circumstances discussed above is also calculated in the framework of eight-band k (.) p theory. The numerical results are in good agreement with the experimental data of published literature.

Quantum waveguide theory for hole transport in mesoscopic structures

A quantum waveguide theory is proposed for hole transport in the mesoscopic structures, including the band mixing effect. We found that due to the interference between the 'light' hole and 'heavy' wave, the transmission and reflection coefficients oscillate more irregularly as a function of incident wave vector geometry parameters. Furthermore conversion between the heavy hole and light hole states occurs at the intersection. (C) 2003 Elsevier Ltd. All rights reserved.

QUANTUM WAVE-GUIDE THEORY FOR MESOSCOPIC STRUCTURES

A one-dimensional quantum waveguide theory for mesoscopic structures is proposed, and the boundary conditions of the wave functions at an intersection are given. The Aharonov-Bohm effect is quantitatively discussed with use of this theory, and the reflection, transmission amplitudes, etc., are given as functions of the magnetic flux, the arm lengths, and the wave vector. It is found that the oscillating current consists of a significant component of the second harmonic. This theory is also applied to investigate quantum-interference devices. The results on the Aharonov-Bohm effect and the quantum-interference devices are found to be in agreement with previous theoretical results.

Analysis and Simulation of S-shaped Waveguide in Silicon-on-insulator

The simulation and analysis of S-shaped waveguide bend are presented.Bend radius larger than 30 mm assures less than 0.5 dB radiation loss for a 4-μm-wide silicon-on-insulator waveguide bend with 2-μm etch depth.Intersection angle greater than 20° provides negligible crosstalk (＜-30 dB) and very low insertion loss.Any reduction in bend radius and intersection angle is at the cost of the degradation of characteristics of bent waveguide and intersecting waveguide, respectively.

Theoretical analysis of the relationships between hardness, elastic modulus, and the work of indentation for work-hardening materials

In our previous paper, the expanding cavity model (ECM) and Lame solution were used to obtain an analytical expression for the scale ratio between hardness (H) to reduced modulus (E-r) and unloading work (W-u) to total work (W-t) of indentation for elastic-perfectly plastic materials. In this paper, the more general work-hardening (linear and power-law) materials are studied. Our previous conclusions that this ratio depends mainly on the conical angle of indenter, holds not only for elastic perfectly-plastic materials, but also for work-hardening materials. These results were also verified by numerical simulations.

Mechanical Behavior of Nanometer Ni by Simulating Nanoindentation

An indentation simulation of the crystal Ni is carried out by a molecular dynamics technique (MD) to study the mechanical behavior at nanometer scales. Indenter tips with both sphere shape and conical shape with 60 cone angle are used, and simulation samples with different crystal orientations are adopted. Some defects such as dislocations and point defects are observed. It is found that nucleated defects (dislocations, amorphous atoms) are from the local region near the pin tip or the sample surface. The temperature distribution of the local region is analyzed and it can explain our MD simulation results.

Heat Transfer Problems Induced By Multi-shocks Interaction

Numerical simulations of the multi-shock interactions observable around hypersonic vehicles were carried out by solving Navier-Stokes equations with the AUSMPW scheme and the new type of the IV interaction created by two incident shock waves was investigated in detail. Numerical results show that the intersection point of the second incident shock with the bow shock plays important role on the flow pattern, peak pressures and heat fluxes. In the case of two incident shocks interacting with the bow shock at the same position, the much higher peak pressure and more severe heat transfer rate are induced than the classical IV interaction. The phenomenon is referred to as the multi-shock interaction and higher requirements will be imposed on thermal protection systems.

不同小麦品质类型与生态环境关系的研究

小麦（Triticum aestivum L.）是世界上种植面积最大，总产量最高，食物加工种类最丰富的粮食作物，占世界人口35 ％－40 ％的人们以此为主要食物。因此小麦产量的高低和品质的优劣直接影响人们对食物需求的安全和满意程度，也影响着人类的营养平衡以及面粉和食品加工业的发展。随着生活水平的提高，人们对于小麦的品质越来越重视。培育优质专用小麦新品种，制定优质专用小麦品种品质生态区划，从而在不同程度上实现小麦的区域化种植和产业化经营具有重要的意义。 影响小麦品质的因素主要是遗传因素和环境因素，其中环境因素又包括各种自然生态因素和人为因素。研究表明，小麦品质的环境间的差异大于品种间的差异，气候条件是影响小麦品质的最重要的因子，小麦品质的地域间的差异反映出了小麦的品质区域分布规律。为了满足市场对不同品质小麦的需求，对小麦进行区域化研究具有重要的理论和现实意义。本研究结合四川的地理、气候特点，研究不同品质类型与生态环境的关系，为在复杂的生态环境内进行品质区划提供依据。 本研究首先根据四川省小麦种植区域的生态特点，在四川省多个典型生态区：川南丘陵的荣县、川西南高原的西昌、川西平原的双流布点种植，采用的小麦试验材料为不同品质类型：中筋小麦川育12、川育14、川育16由本所提供；弱筋小麦川麦32和强筋小麦川麦36由四川省农科院作物所提供。通过研究品质性状与品种及各个生态因子包括地点、土壤土质差异等的关系，明确不同生态环境中适宜种植的小麦品种类型，强筋小麦、中筋小麦更适合于在荣县、双流地区种植，弱筋小麦更适合于在西昌地区种植，为品种品质区划奠定基础。 其次，选择了本课题组育成的稳定中间品系，对其品质性状SDS沉降值进行了多年测定。分析了品质性状SDS沉降值与多种气候因子的相关性，结果表明SDS沉降值与日均温、日照时数成正相关，与降水量成负相关，为品质育种提供了理论依据。 此外，以中筋小麦新品种小麦川育14为材料，应用三元二次正交旋转回归模型设计试验，研究主要栽培因子播期、密度和施肥量对产量的影响，并建立函数模型。经计算机模拟寻优，筛选出了高产高效栽培组合措施，并确定了置信域。结合四川省不同的地理情况，在平原和丘陵地区分别进行实验，并各自建立了高产高效栽培组合措施，为川育14品种的推广提供了理论指导。 Wheat is one of the most important crops in the world. About 35%-40% people all over the world, take the wheat as their most important food. So the quality, as well as the quantity of the wheat makes a direct effect on people’s demands of food and their satisfaction. It also effects on human’s healthy, and the development of the Food processing industry. With the development of the living standard, people pay more attention to the quality of wheat. So, we set a special ecology zoning for wheat. It is significant to carry out planting the wheat in special zoning in varying degrees. The main factors affecting wheat quality are heredity and environment including many ecological factors and the factors in cultivation. As to the quality，the difference between ecology and cultivation is more important than the difference between special wheat. In so many factors, climate is the most important one. From the difference in quality between different zones，we can conclude the rule of distribution abort quality of wheat. Finding out the intersection of numerous wheat not only can meet the demand of food production，but also has important signification in theory and realism。In our research, according to the complex geography in Sichuan province, we study the relationship between numerous kinds of quality characters in wheat and the ecology. So, we can set a foundation for more research. In this research, firstly, we plant wheat in some typical ecological regions of SICHUAN province: RONGXIAN（south of SC）、XICHANG（south of SC）, SHUANGLIU(west of SC). The materials of the experiments: ChuanYu12, ChuanYu14, ChuanYu16(from our institute), Chuanmai32, Chuanmai36 (from the Chinese academy of agriculture sciences of Sichuan. Through the research on the relationship between the quality of wheat and those ecology factors, we can make a definition that which area is perfect matched with which kind of wheat. And it can satisfy the demand of people. Secondly, select many sorts of wheat from our research group. All of them are selected and bred more than 3 years(2003-2005). And we make every-year determination as well. We’ve gotten SDS value from those 9, and various data on factors of climate. We also got to know the relation ship between those numbers. Thirdly, use Chuanyu14 as material, the mathematical model of the relation between the production of wheat and main agricultural measures such as date, density and fertilizer. The model was established by association of three elements two return, rotate and regression. We set a suitable model and get a suitable method which can make high harvest. Based on various kinds of geographical regions in Sichuan province, we set different models which can be used in plain and hill. So, we can plant Chuan Yu 14 in Sichuan province under the result in research.

Surface morphology of He-implanted single-crystalline silicon

Single-crystalline Si (100) samples were implanted with 30 keV He2+ ions to doses ranging from 2.0x10(16) to 2.0x10(17) ions/cm(2) and subsequently thermally annealed at 800 degrees C for 30min. The morphological change of the samples with the increase of implantation dose was investigated using atomic force microscopy (AFM). It was found that oblate-shaped blisters with an average height around 4.0nm were found on the 2.0 x 10(16) ions /cm(2) implanted sample surface; spherical-shaped blisters with an average height wound 10.0nm were found on the 5.0 x 10(16) ions/cm(2) implanted sample surface; strip-shaped and conical cracks were observed on the sample He-implanted to a dose of 1.0 X 10(17) ions /cm(2). Exfoliations occurred on the sample surface to a dose of 2.0 x10(17) ions /cm(2). Mechanisms underlying the surface change were discussed.

Preliminary study of a niobium quarter-wave prototype cavity for a heavy-ion superconducting linac

Superconducting quarter-wave resonators, due to their compactness and their convenient shape for tuning and coupling, are very attractive for low-beta beam acceleration. In this paper, two types of cavities with different geometry have been numerically simulated: the first type with larger capacitive load in the beam line and the second type of lollipop-shape for 100 MHz, beta=0.06 beams; then the relative electromagnetic parameters and geometric sizes have been compared. It is found that the second type, whose structural design is optimized with the conical stem and shaping drift-tube, can support the better accelerating performance. At the end of the paper, some structural deformation effects on frequency shifts and appropriate solutions have been discussed.