Stability of astaxanthin in yogurt used to simulate apricot color, under refrigeration

The aim of this study was to incorporate astaxanthin to yogurts with different fat content to match apricot (Prunus armeniaca L.) color. The samples containing astaxanthin were stored at 5 ± 3 °C, and color stability and astaxanthin content were determined by colorimetry and high performance liquid chromatography (HPLC), respectively. Yogurt samples were analyzed in triplicate every 24 hours for one week and subsequently every week for 3 more weeks There were no significant differences (p < 0.05) between astaxanthin concentration values at 0 and 28 days for both samples; therefore, it can be said that the fat content in the yogurt had not effect on the stability of pigment. The low dispersion of the data showed uniformity in the three chromaticity coordinates L*, a*, b* throughout the storage period for both types of yogurt. Values of ∆E ≥ 5.0 were not obtained at any time during storage, indicating high stability of the pigment.

Biochemical changes and color properties of fresh-cut green bean (Phaseolus vulgaris L. cv.gina) treated with calcium chloride during storage

Calcium chloride is widely used in industries as a firming agent, and also to extend shelf-life of vegetables. The aim of this study was to determine, the effect of different doses of calcium chloride on biochemical and color properties of fresh-cut green bean. Fresh-cut green beans were dipped for 90 seconds in 0.5%, 1%, 2% and 3% solution of calcium chloride at 25°C. The fresh-cut green bean samples were packaged in polystyrene foam dishes, wrapped with stretch film and stored in a cold room at 5±1°C temperature and 85-90% RH. Calcium chloride treatments did not retain the green color of samples. Whiteness index, browning index and total color difference (ΔE) values of CaCl2 treated samples were high. Saturation index and hue angle were low compared to the control, especially at higher doses of CaCl2. Polyphenol oxidase (PPO) enzyme activity in samples treated with CaCl2 at 3% doses, was low at the 7th days of storage than with other treatments. Fructose and sucrose content of samples increased in all treatment groups whereas glucose level decreased during the first 4th days of storage.

Composition and color stability of anthocyanin-based extract from purple sweet potato

AbstractPurple sweet potato (PSP) can provide products with attractive color besides nutritious benefits in food processing. So, the compositions and color stability of an aqueous anthocyanin-based PSP extract were investigated in order to promote its wide use in food industry. PSP anthocyanins were extracted with water, and nine individual anthocyanins (48.72 ug mL–1 in total, 24.36 mg/100 g fresh PSP in yield) were found by HPLC analysis. The PSP extract also contained 17.11 mg mL–1 of protein, 0.44 mg mL–1 of dietary fiber, 2.82 mg mL–1 of reducing sugars, 4.02 ug mL–1 of Se, 54.21 ug mL–1 of Ca and 60.83 ug mL–1 of Mg. Changes in color and stability of the PSP extract, as affected by pH, heat, light and extraction process, were further evaluated. Results indicated that PSP anthocyanins had good stability at pH 2.0-6.0, while the color of PSP extract kept stable during 30 days of storage at 20 °C in dark. Both UV and fluorescent exposure weakened the color stability of PSP extract and UV showed a more drastic effect in comparison. A steaming pretreatment of fresh PSP is beneficial to the color stability.

Impact of different drying parameters on color, β-carotene, antioxidant activity and minerals of apricot (Prunus armeniacaL.)

Abstract Apricot is one of the fruits dried by using different methods, such as sun, convective or microwave drying. The effects of drying methods on the components of this fruit differ depending upon the temperature or time parameters. In this research, the impacts of convective, microwave and microwave–convective drying techniques on color, β-carotene, minerals and antioxidant activity of apricots were investigated. The color values (L*, b*,ΔEab, h° and C*ab) of dried fruit were decreased, while the a* values increased. Compared with a fresh sample, the dried apricots showed a 1.4-3.9-fold proportional increase in β-carotene based on the increment of dry matter. The samples dried at high temperature and microwave levels, at 75 °C+90 watt and 75 °C+160 watt, showed lower antioxidant activity. Of the different drying treatments, the microwave-convective method (50 °C+160 watt) obtained a higher β-carotene content while maintaining antioxidant activity with a short drying time.

Calcium citrate improves the epithelial-to-mesenchymal transition induced by acidosis in proximal tubular cells

INTRODUCTION: Epithelial-to-mesenchymal transition (EMT) is a key event in renal fibrosis. The aims of the study were to evaluate acidosis induced EMT, transforming-growth-factor (TGF) β1 role and citrate effect on it. METHODS: HK2 cells (ATCC 2290) were cultured in DMEM/HAM F12 medium, pH 7.4. At 80% confluence, after 24 hr under serum free conditions, cells were distributed in three groups (24 hours): A) Control: pH 7.4, B) Acidosis: pH 7.0 and C) Calcium citrate (0.2 mmol/L) + pH 7.0. Change (Δ) of intracellular calcium concentration, basal and after Angiotensin II (10-6M) exposition, were measured to evaluate cellular performance. EMT was evaluated by the expression of α-smooth muscle actin (α-SMA) and E-cadherin by immunocytochemistry and/or Western blot. TGF-β1 secretion was determined by ELISA in cell supernatant. RESULTS: At pH 7.0 HK2 cells significantly reduced E-cadherin and increased α-SMA expression (EMT). Supernatant TGF-β1 levels were higher than in control group. Calcium citrate decreased acidosis induced EMT and improved cells performance, without reduction of TGF-β production. CONCLUSIONS: Acidosis induces EMT and secretion of TGF-β1 in tubular proximal cells in culture and citrate improves cellular performance and ameliorates acidosis induced EMT.

Matkustavan muistin jäljillä : Travelling memories : lives in transition -symposium Helsingissä, 27.-28.11.2014

Seminaariraportti

Open access is possible! On the transition of a business model

Kai Karin Geschun's presentation at Kirjastoverkkopäivät, Helsinki 21.10.2015.

Test of exudates color hues for evaluating the physiological potential of coffee (Coffea arabica L.) seeds

Coffee seeds have slow and irregular germination, losing fast their viability during storage, and the standard germination test of these seeds requires at least 30 days. Besides, the results may not reflect the actual physiological quality of these seeds. The objective of this work was to develop a fast and practical test for evaluating the viability of coffee seeds, which is based on the interpretation of different color hues of exudates from seeds. Coffee seeds of the cultivar Catuai 44 from six lots were submitted to germination, accelerated aging, and electrical conductivity tests. In the exudates color hue test, coffee seeds without the parchment and the silvery pellicle (four replications of 10 seeds each) were distributed on top of paper towels moistened and then maintained into a germinator, at 25 ºC for 24, 48, 72, 96, and 120 h. Three classes of color hues were established: colorless, light color hue, and dark color hue, assigning the values of 0, 1, and 3, for each class, respectively. The proposed exudates color hue test can be recommended for the fast assessment of viability for coffee seeds. The most promising results were obtained for seeds with 12% moisture content, after imbibition periods of 72, 96, and 120 h; and with 30% moisture content, after imbibition periods of 72 and 120 h.

Hydrogen Sensor Application of Anodic Titanium Oxide Nanostructures

Hydrogen (H2) fuel cells have been considered a promising renewable energy source. The recent growth of H2 economy has required highly sensitive, micro-sized and cost-effective H2 sensor for monitoring concentrations and alerting to leakages due to the flammability and explosiveness of H2 Titanium dioxide (TiO2) made by electrochemical anodic oxidation has shown great potential as a H2 sensing material. The aim of this thesis is to develop highly sensitive H2 sensor using anodized TiO2. The sensor enables mass production and integration with microelectronics by preparing the oxide layer on suitable substrate. Morphology, elemental composition, crystal phase, electrical properties and H2 sensing properties of TiO2 nanostructures prepared on Ti foil, Si and SiO2/Si substrates were characterized. Initially, vertically oriented TiO2 nanotubes as the sensing material were obtained by anodizing Ti foil. The morphological properties of tubes could be tailored by varying the applied voltages of the anodization. The transparent oxide layer creates an interference color phenomena with white light illumination on the oxide surface. This coloration effect can be used to predict the morphological properties of the TiO2 nanostructures. The crystal phase transition from amorphous to anatase or rutile, or the mixture of anatase and rutile was observed with varying heat treatment temperatures. However, the H2 sensing properties of TiO2 nanotubes at room temperature were insufficient. H2 sensors using TiO2 nanostructures formed on Si and SiO2/Si substrates were demonstrated. In both cases, a Ti layer deposited on the substrates by a DC magnetron sputtering method was successfully anodized. A mesoporous TiO2 layer obtained on Si by anodization in an aqueous electrolyte at 5°C showed diode behavior, which was influenced by the work function difference of Pt metal electrodes and the oxide layer. The sensor enabled the detection of H2 (20-1000 ppm) at low operating temperatures (50–140°C) in ambient air. A Pd decorated tubular TiO2 layer was prepared on metal electrodes patterned SiO2/Si wafer by anodization in an organic electrolyte at 5°C. The sensor showed significantly enhanced H2 sensing properties, and detected hydrogen in the range of a few ppm with fast response/recovery time. The metal electrodes placed under the oxide layer also enhanced the mechanical tolerance of the sensor. The concept of TiO2 nanostructures on alternative substrates could be a prospect for microelectronic applications and mass production of gas sensors. The gas sensor properties can be further improved by modifying material morphologies and decorating it with catalytic materials.

Evaluation of the main energy scenarios for the global energy transition

Energy scenarios are used as a tool to examine credible future states and pathways. The one who constructs a scenario defines the framework in which the possible outcomes exist. The credibility of a scenario depends on its compatibility with real world experiences, and on how well the general information of the study, methodology, and originality and processing of data are disclosed. In the thesis, selected global energy scenarios’ transparency and desirability from the society’s point of view were evaluated based on literature derived criteria. The global energy transition consists of changes to social conventions and economic development in addition to technological development. Energy solutions are economic and ethical choices due to far-reaching impacts of energy decision-making. Currently the global energy system is mostly based on fossil fuels, which is unsustainable over the long-term due to various reasons: negative climate change impacts, negative health impacts, depletion of fossil fuel reserves, resource-use conflicts with water management and food supply, loss of biodiversity, challenge to preserve ecosystems and resources for future generations, and inability of fossil fuels to provide universal access to modern energy services. Nuclear power and carbon capture and storage cannot be regarded as sustainable energy solutions due to their inherent risks and required long-term storage. The energy transition is driven by a growing energy demand, decreasing costs of renewables, modularity and scalability of renewable technologies, macroeconomic benefits of using renewables, investors’ risk awareness, renewable energy related attractive business opportunities, almost even distribution of solar and wind resources on the planet, growing awareness of the planet’s environmental status, environmental movements and tougher environmental legislation. Many of the investigated scenarios identified solar and wind power as a backbone for future energy systems. The scenarios, in which the solar and wind potentials were deployed in largest scale, met best the set out sustainability criteria. In future research, energy scenarios’ transparency can be improved by better disclosure on who has ordered the study, clarifying the funding, clearly referencing to used sources and indicating processed data, and by exploring how variations in cost assumptions and deployment of technologies influence on the outcomes of the study.

Transition / [dir. Eugene Jolas]

1938/04 (N27)-1938/05.

Transition / [dir. Eugene Jolas]

1927/11.

Transition / [dir. Eugene Jolas]

1928/09 (N14)-1928/11.

Transition / [dir. Eugene Jolas]

1927/07.

Transition / [dir. Eugene Jolas]

1927/09.