Biomass and reproduction of Pacific sardine (Sardinops sagax) off the Pacific northwestern United States, 2003–2005

The Pacific sardine (Sardinops sagax) is distributed along the west coast of North America from Baja California to British Columbia. This article presents estimates of biomass, spawning biomass, and related biological parameters based on four trawl-ichthyoplankton surveys conducted during July 2003 –March 2005 off Oregon and Washington. The trawl-based biomass estimates, serving as relative abundance, were 198,600 t (coefficient of variation [CV] = 0.51) in July 2003, 20,100 t (0.8) in March 2004, 77,900 t (0.34) in July 2004, and 30,100 t (0.72) in March 2005 over an area close to 200,000 km2. The biomass estimates, high in July and low in March, are a strong indication of migration in and out of this area. Sardine spawn in July off the Pacific Northwest (PNW) coast and none of the sampled fish had spawned in March. The estimated spawning biomass for July 2003 and July 2004 was 39,184 t (0.57) and 84,120 t (0.93), respectively. The average active female sardine in the PNW spawned every 20–40 days compared to every 6–8 days off California. The spawning habitat was located in the southeastern area off the PNW coast, a shift from the northwest area off the PNW coast in the 1990s. Egg production in off the PNW for 2003–04 was lower than that off California and that in the 1990s. Because the biomass of Pacific sardine off the PNW appears to be supported heavily by migratory fish from California, the sustainability of the local PNW population relies on the stability of the population off California, and on local oceanographic conditions for local residence.

Abundance, distribution, and habitat of leatherback turtles (Dermochelys coriacea) off California, 1990−2003

Leatherback turtles (Dermochelys coriacea) are regularly seen off the U.S. West Coast, where they forage on jellyfish (Scyphomedusae) during summer and fall. Aerial line-transect surveys were conducted in neritic waters (<92 m depth) off central and northern California during 1990−2003, providing the first foraging population estimates for Pacific leatherback turtles. Males and females of about 1.1 to 2.1 m length were observed. Estimated abundance was linked to the Northern Oscillation Index and ranged from 12 (coefficient of variation [CV] =0.75) in 1995 to 379 (CV= 0.23) in 1990, averaging 178 (CV= 0.15). Greatest densities were found off central California, where oceanographic retention areas or upwelling shadows created favorable habitat for leatherback turtle prey. Results from independent telemetry studies have linked leatherback turtles off the U.S. West Coast to one of the two largest remaining Pacific breeding populations, at Jamursba Medi, Indonesia. Nearshore waters off California thus represent an important foraging region for the critically endangered Pacific leatherback turtle.

Growth dynamics of the spinner shark (Carcharhinus brevipinna) off the United States southeast and Gulf of Mexico coasts: a comparison of methods

The age and growth dynamics of the spinner shark (Carcharhinus brevipinna) in the northwest Atlantic Ocean off the southeast United States and in the Gulf of Mexico were examined and four growth models were used to examine variation in the ability to fit size-at-age data. The von Bertalanffy growth model, an alternative equation of the von Bertalanffy growth model with a size-at-birth intercept, the Gompertz growth model, and a logistic model were fitted to sex-specific observed size-at-age data. Considering the statistical criteria (e.g., lowest mean square error [MSE], high coefficient-of-determination, and greatest level of significance) we desired for this study, the logistic model provided the best overall fit to the size-at-age data, whereas the von Bertalanffy growth model gave the worst. For “biological validity,” the von Bertalanffy model for female sharks provided estimates similar to those reported in other studies. However, the von Bertalanffy model was deemed inappropriate for describing the growth of male spinner sharks because estimates of theoretical maximum size (L∞) indicated a size much larger than that observed in the field. However, the growth coefficient (k= 0.14/yr) from the Gompertz model provided an estimate most similar to that reported for other large coastal species. The analysis of growth for spinner shark in the present study demonstrates the importance of fitting alternative models when standard models fit the data poorly or when growth estimates do not appear to be realistic.

Age and growth estimates of the thorny skate (Amblyraja radiata) in the western Gulf of Maine

The northwest Atlantic population of thorny skates (Amblyraja radiata) inhabits an area that ranges from Greenland and Hudson Bay, Canada, to South Carolina. Despite such a wide range, very little is known about most aspects of the biology of this species. Recent stock assessment studies in the northeast United States indicate that the biomass of the thorny skate is below the threshold levels mandated by the Sustainable Fisheries Act. In order to gain insight into the life history of this skate, we estimated age and growth for thorny skates, using vertebral band counts from 224 individuals ranging in size from 29 to 105 cm total length (TL). Age bias plots and the coefficient of variation indicated that our aging method represents a nonbiased and precise approach for the age assessment of A. radiata. Marginal increments were significantly different between months (Kruskal-Wallis P<0.001); a distinct trend of increasing monthly increment growth began in August. Age-at-length data were used to determine the von Bertalanffy growth parameters for this population: L∞ = 127 cm (TL) and k= 0.11 for males; L∞ = 120 cm (TL) and k= 0.13 for females. The oldest age estimates obtained for the thorny skate were 16 years for both males and females, which corresponded to total lengths of 103 cm and 105 cm, respectively.

Application of the Leslie Model to Commercial Catch and Effort of the Slipper Lobster, Scyllarides squammosus, Fishery in the Northwestern Hawaiian Islands

Commercial catch and effort data were fit to the Leslie model to estimate preexploitation abundance and the catchability coefficient of slipper lobster, Scyllarides squammosus, in the Northwestern Hawaiian Islands (NWHI). A single vessel fished for 34 consecutive days in the vicinity of Laysan Island and caught 126,127 total slipper lobster in 36,170 trap hauls. Adjusted catch of legal slipper lobster dropped from a high of 3.70 to 1.16 lobster per trap haul. Preexploitation abundance at Laysan Island was an estimated 204,000 legal slipper lobster, which was extrapolated to yield an estimate of 1.2 X 106 to 3.8 X 106 lobster for the entire NWHI slipper lobster fishery.

A Comparison of Two Stratification Schemes Used in Sampling Canadian Atlantic Cod, Gadus morhua

Sampling is a key element in the assessment of any fish stock. It is often one of the most expensive activities of the management process; thus, improved efficiency can result in significant cost savings. In most cases a two-phase sampling strategy is employed. Two commonly used versions of such stratified random schemes were simulated using a test population based on Atlantic cod, Gadus morhua. A 1 otolith per 1 cm length frequency currently used for many flatfish and some smaller gadoids and a 3 otolith per 3 cm length frequency currently used for many of the larger gadoids. No difference was detected in the age composition or mean length at age for either scheme; however, 10 percent fewer otoliths were collected in 1 for 1 sampling than 3 for 3. There was an improvement of between 30 and 60 percent in the coefficient of variation of the estimated catch numbers at age using the 1 for 1 compared with the 3 for 3 stratified sampling. For these reasons and other operational considerations, the 1 for 1 stratified random design of sampling appears to be superior.

Technical efficiency in artisanal fisheries (AF) in Badagry local government area of Lagos State, Nigeria

This study examined the technical efficiency in artisanal fisheries in Lagos State of Nigeria. The study employed a two stage random sampling procedure for the selection of 120 respondents. The analytical techniques involved descriptive statistics and estimation of technical efficiency following maximum likelihood estimation (MLE) procedure available in FRONTIER 4.1. The MLE result of the stochastic frontier production function showed that hired labour, cost of repair and capital items are critical factors that influences productivity of artisanal fishermen with the coefficient of hired labour being highly elastic. This implies that employing more labour will significantly increase the catch in the study area. The predicted farm efficiency with an average value of 0.92 showed that there is a marginal potential of about 8 percent to increase the catch, hence the income of the fishermen. The study further examined the factors that influence productivity of fishermen in the study area. Year of education, mode of operation and frequency of fishing have important implication on the technical efficiency of fishermen in the study area.

Modelling the entrainment and motion of particles in a gap: Application to abrasive wear

The microscale abrasion or ball-cratering test is being increasingly applied to a wide range of bulk materials and coatings. The response of materials to this test depends critically on the nature of the motion of the abrasive particles in the contact zone: whether they roll and produce multiple indentations in the coating, or slide causing grooving abrasion. Similar phenomena also occur when hard contaminant particles enter a lubricated contact. This paper presents simple quantitative two-dimensional models which describe two aspects of the interaction between a hard abrasive particle and two sliding surfaces. The first model treats the conditions under which a spherical abrasive particle of size d can be entrained into the gap between a rotating sphere of radius R and a plane surface. These conditions are determined by the coefficients of friction between the particle and the sphere, and the particle and the plane, denoted by μs and μp respectively. This model predicts that the values of (μs + μp) and 2μs should both exceed √2d/R for the particles to be entrained into the contact. If either is less than this value, the particle will slide against the sphere and never enter the contact. The second model describes the mechanisms of abrasive wear in a contact when an idealized rhombus-sectioned prismatic particle is located between two parallel plane surfaces separated by a certain distance, which can represent either the thickness of a fluid film or the spacing due to the presence of other particles. It is shown that both the ratio of particle size to the separation of the surfaces and the ratio of the hardnesses of the two surfaces have important influences on the particle motion and hence on the mechanism of the resulting abrasive wear. Results from this model are compared with experimental observations, and the model is shown to lead to realistic predictions. © IMechE 2003.

Effect of sampling interval on estimates of larval supply

Estimates of larval supply can provide information on year-class strength that is useful for fisheries management. However, larval supply is difficult to monitor because long-term, high-frequency sampling is needed. The purpose of this study was to subsample an 11-year record of daily larval supply of blue crab (Callinectes sapidus) to determine the effect of sampling interval on variability in estimates of supply. The coefficient of variation in estimates of supply varied by 0.39 among years at a 2-day sampling interval and 0.84 at a 7-day sampling interval. For 8 of the 11 years, there was a significant correlation between mean daily larval supply and lagged fishery catch per trip (coefficient of correlation [r]=0.88). When these 8 years were subsampled, a 2-day sampling interval yielded a significant correlation with fishery data only 64.5% of the time and a 3-day sampling interval never yielded a significant correlation. Therefore, high-frequency sampling (daily or every other day) may be needed to characterize interannual variability in larval supply.

Mechanical and leaching behaviour of slag-cement and lime-activated slag stabilised/solidified contaminated soil.

Stabilisation/solidification (S/S) is an effective technique for reducing the leachability of contaminants in soils. Very few studies have investigated the use of ground granulated blast furnace slag (GGBS) for S/S treatment of contaminated soils, although it has been shown to be effective in ground improvement. This study sought to investigate the potential of GGBS activated by cement and lime for S/S treatment of a mixed contaminated soil. A sandy soil spiked with 3000mg/kg each of a cocktail of heavy metals (Cd, Ni, Zn, Cu and Pb) and 10,000mg/kg of diesel was treated with binder blends of one part hydrated lime to four parts GGBS (lime-slag), and one part cement to nine parts GGBS (slag-cement). Three binder dosages, 5, 10 and 20% (m/m) were used and contaminated soil-cement samples were compacted to their optimum water contents. The effectiveness of the treatment was assessed using unconfined compressive strength (UCS), permeability and acid neutralisation capacity (ANC) tests with determination of contaminant leachability at the different acid additions. UCS values of up to 800kPa were recorded at 28days. The lowest coefficient of permeability recorded was 5×10(-9)m/s. With up to 20% binder dosage, the leachability of the contaminants was reduced to meet relevant environmental quality standards and landfill waste acceptance criteria. The pH-dependent leachability of the metals decreased over time. The results show that GGBS activated by cement and lime would be effective in reducing the leachability of contaminants in contaminated soils.

Abundance of cetaceans in the oceanic northern Gulf of Mexico from 2003 and 2004 ship surveys

The Gulf of Mexico (GMx) is a subtropical marginal sea of the western North Atlantic Ocean with a diverse cetacean community. Ship-based, line-transect abundance surveys were conducted in oceanic waters (>200 m deep) of the northern GMx within U.S. waters (380,432 square km) during summer 2003 and spring 2004. Data from these surveys were pooled and minimum abundance estimates were based on 10,933 km of effort and 433 sightings of at least 17 species.The most commonly sighted species (number of groups) were pantropical spotted dolphin, Stenella attenuata (115); sperm whale, Physeter macrocephalus (85); dwarf/pygmy sperm whale, Kogia sima/breviceps (27); Risso’s dolphin, Grampus griseus (26); and bottlenose dolphin, Tursiops truncatus (26). The most abundant species (number of individuals; coefficient of variation) were S. attenuata (34,067; 0.18); Clymene dolphin, S. clymene (6,575; 0.36); T. truncatus (3,708; 0.42); and striped dolphin, S. coeruleoalba (3,325; 0.48). The only large whales sighted were P. macrocephalus (1,665; 0.20) and Bryde’s whale, Balaenoptera edeni (15; 1.98). Abundances for other species or genera ranged from 57 to 2,283 animals. Cetaceanswere sighted throughout the oceanic northern GMx, and whereas many species were widely distributed, some had more regional distributions. Compared to abundance estimates for this area based on 1996-2001 surveys, the estimate for S. attenuata was significantly smaller (P <0.05) and that for the spinner dolphin, S. longirostris, appeared much smaller. Also, P. macrocephalus estimates were based on less negatively biased estimates of group-size using 90-minute counts during 2003 and 2004.

Morphometric studies in Penaeus merguiensis from Ratnagiri waters for selection of the brood stock in genetic improvement programmes

Studies on genetic improvement of penaeid prawns for the character higher tail weight using methods of selective breeding were undertaken. Prior to the actual breeding experiments it was necessary to find out the quantum of available variability in the character tail weight amongst the natural populations of Penaeus merguiensis from the Indian waters. Thirteen morphometric variables were measured and various statistical analyses were carried out. The tail weight showed almost double values of coefficient of variation in the females than the males (C.V. 20.37 and 11.08 respectively). The combination of the characters viz. sixth segment length (SSL), sixth segment depth (SSD) and posterior abdominal circumference (PAC) gave the highest R super(2) values. These variables were easy to measure and gave maximum variation in the character tail weight without sacrificing the breeders in the brood stock. The quantitative character tail weight was influenced by both genetic and environmental factors was statistically ascertained by applying 2-Factor analysis.

Studies on maturity, spawning and fecundity of Nemipterus japonicus (Bloch) off Bombay coast

Studies indicated spawning season of Nemipterus japonicus off Bombay coast (Maharashtra, India), to be during July to December with peak breeding during November to December. Females attained first maturity at the length range 110-120 mm; 50% maturity and spawning occurred at 135 mm within one year of its age. Overall male: female ratio for the entire period of study was 1:1.01. Relationships of fecundity with total length of fish, total ovary weight and per g. fish weight were worked out as F=(-72674.33) L super(739.73); F =65.44 W super(807.33); F=3112.57 W super(22383.27) and F=467.85 W super(4.96) with coefficient of correlation values (r) 0.9090, 0.9443, 0.9911 and 0.8843 respectively.

Contribution of zooplankton to the fishery of Dharamtar Creek, adjoining Bombay Harbour

The rich zooplankton standing stock of Dharamtar Creek showed a variation of 8 to 5261 (av. 1032) mg C/100 m super(3)/d which led to a turnover of 29 tonnes C/km super(2)/y. The estimated fishery potential from zooplankton production was 0.079 tonnes C/km super(2) or 29.00 tonnes/km/y. The worked out yield in terms of wet weight of fish was 0.059 tonnes/km2u2/d. Experimental trawling within the creek showed a potential of 0.19 tonnes/km super(2)/d suggesting a transfer coefficient of only 31.4% form secondary to tertiary level. Fish eggs and larvae were very common in the area but contributed collectively only 1% to the total zooplankton population. On an average the outer zone sustained relatively higher population of fish eggs and larvae than the interior zone. The mean population density of larvae (334/100 m super(3)) was 3.5 times higher than fish eggs (93/100 m super(3)) suggesting the good survival rate and a congenial environment for larvae to thrive.

TIME RESOLVED REFLECTIVITY MEASUREMENTS APPLIED TO RAPID ISOTHERMAL ANNEALING OF ION IMPLANTED SILICON.

The annealing of ion implantation damage in silicon by rapid isothermal heating has been monitored by the time resolved reflectivity (TRR) method. This technique was applied simultaneously at a wavelength of 632. 8nm and also at 1152nm, where the optical absorption coefficient of silicon is less. The two wavelength method simplifies the interpretation of TRR results, extends the measurement depth and allows good resolution of the position of the interface between amorphous and crystalline silicon. The regrowth of amorphous layers in silicon, created by self implantation and implanted with electrically active impurities, was observed. Regrowth in rapid isothermal annealing occurs during the heating up stage of typical thermal cycles. Impurities such as B, P, and As increase the regrowth rate in a manner consistent with a vacancy model for regrowth. The maximum regrowth rate in boron implanted silicon is limited by the solid solubility.