The morphology of spray-dried particles

Samples of Various industrial or pilot plant spray-dried materials were obtained from manufacturers together with details of drying conditions and feed concentrations. The samples were subjected to qualitative and semi-quantitative examination to identify structural and morphological features. The results were related to measured bulk physical properties and to drying conditions. Single particles were produced in a convective drying process Analogous to spray drying, in which different solids or mixtures of solids were dried from solutions, slurries or pastes as single suspended droplets. The localized chemical and physical structures were analysed and in some cases the retention of volatiles monitored. The results were related to experimental conditions, viz.; air temperature, initial solids concentration and the degree of feed aeration. Three distinct categories of particle morphology were identified, i.e.; crystalline, skin-forming and agglomerate. Each category is evidence of a characteristic drying behaviour which is dependent on initial solids concentration. the degree of feed aeration, and drying temperature. Powder flow ability, particle and bulk density, particle-size, particle friability, and the retention of volatiles bear a direct relationship to morphological structure. Morphologies of multicomponent mixtures were complex, but the respective migration rates of the solutes were dependent on drying temperature. Gas-film heat and SDSS transfer coefficients of single pure liquid droplets were also measured over a temperature range of 50•C to 200•C under forced convection. Balanced transfer rates were obtained attributed to droplet instability or oscillation within the airflow, demonstrated in associated work with single free-flight droplets. The results are of relevance to drier optimisation and to the optimisation of product characteristics, e.g.; particle strength and essential volatiles-retention, in convective drying.

Management information:design of a system for change identification

This thesis deals with the problem of Information Systems design for Corporate Management. It shows that the results of applying current approaches to Management Information Systems and Corporate Modelling fully justify a fresh look to the problem. The thesis develops an approach to design based on Cybernetic principles and theories. It looks at Management as an informational process and discusses the relevance of regulation theory to its practice. The work proceeds around the concept of change and its effects on the organization's stability and survival. The idea of looking at organizations as viable systems is discussed and a design to enhance survival capacity is developed. It takes Ashby's theory of adaptation and developments on ultra-stability as a theoretical framework and considering conditions for learning and foresight deduces that a design should include three basic components: A dynamic model of the organization- environment relationships; a method to spot significant changes in the value of the essential variables and in a certain set of parameters; and a Controller able to conceive and change the other two elements and to make choices among alternative policies. Further considerations of the conditions for rapid adaptation in organisms composed of many parts, and the law of Requisite Variety determine that successful adaptive behaviour requires certain functional organization. Beer's model of viable organizations is put in relation to Ashby's theory of adaptation and regulation. The use of the Ultra-stable system as abstract unit of analysis permits developing a rigorous taxonomy of change; it starts distinguishing between change with in behaviour and change of behaviour to complete the classification with organizational change. It relates these changes to the logical categories of learning connecting the topic of Information System design with that of organizational learning.

The growth and awareness of health and safety at work, 1780-1900

This thesis examines the growth and awareness of health and safety at work between 1780 and 1900. In this period the hazards at work were increased by the intensification of production brought about by the Industrial Revolution, and new risks to health arose from the wider range of toxic substances in use by manufacturing industry. There is discussion in the thesis of the extent to which the problems were identified in an age of short life expectancy and limited medical knowledge. The sources studied have been largely medical, governmental, trade and press reports. The emphasis is on the first effects seen and recommendations made, and where possible, the extent of the problem and the effectiveness of any preventative measures adopted and examined. There is discussion of the growing involvement of the Government in industrial health and safety. The subject is viewed in the light of modern thinking on industrial health but uses a classification appropriate to historical resources. Psychological and minor afflictions, neglected in the 19th century, are not considered. The available literature is reviewed in each section. Three detailed case studies conclude the thesis, two on the notoriously dangerous occupations of metal grinding and pottery, and one on occupational eye injuries. Each study is based on a different type of source material. The thesis overall shows that there was extensive concern for health and safety at work, but no systematic approach and only ad hoc implementation of preventative measures; and that the rate at which conditions improved varied between different industries and different categories of workers . However, some modern principles of health and safety at work can be seen emerging, and the period laid the necessary medical, technical and legal foundations for developments in the present century.

Virtual manufacturing:a study of some important issues relating to the transformation of traditional manufacturing organisations

This thesis starts with a literature review, outlining the major issues identified in the literature concerning virtual manufacturing enterprise (VME) transformation. Then it details the research methodology used – a systematic approach for empirical research. next, based on the conceptual framework proposed, this thesis builds three modules to form a reference model, with the purpose of clarifying the important issues relevant to transforming a traditional manufacturing company into a VME. The first module proposes a mechanism of VME transformation – operating along the VME metabolism. The second module builds a management function within a VME to ensure a proper operation of the mechanism. This function helps identify six areas as closely related to VME transformation: lean manufacturing; competency protection; internal operation performance measurement; alliance performance measurement; knowledge management; alliance decision making. The third module continues and proposes an alliance performance measurement system which includes 14 categories of performance indicators. An analysis template for alliance decision making is also proposed and integrated into the first module. To validate these three modules, 7 manufacturing organisations (5 in China and 2 in the UK) were investigated, and these field case studies are analysed in this thesis. The evidence found in these organisations, together with the evidence collected from the literature, including both researcher views and literature case studies, provide support for triangulation evidence. In addition, this thesis identifies the strength and weakness patterns of the manufacturing companies within the theoretical niche of this research, and clarifies the relationships among some major research areas from the perspective of virtual manufacturing. Finally, the research findings are summarised, as well as their theoretical and practical implications. Research limitations and recommendations for future work conclude this thesis.

The anatomical and functional correlates of category-specificity

The dramatic effects of brain damage can provide some of the most interesting insights into the nature of normal cognitive performance. In recent years a number of neuropsychological studies have reported a particular form of cognitive impairment where patients have problems recognising objects from one category but remain able to recognise those from others. The most frequent ‘category-specific’ pattern is an impairment identifying living things, compared to nonliving things. The reverse pattern of dissociation, i.e., an impairment recognising and naming nonliving things relative to living things, has been reported albeit much less frequently. The objective of the work carried out in this thesis was to investigate the organising principles and anatomical correlates of stored knowledge for categories of living and nonliving things. Three complementary cognitive neuropsychological research techniques were employed to assess how, and where, this knowledge is represented in the brain: (i) studies of normal (neurologically intact) subjects, (ii) case-studies of neurologically impaired patients with selective deficits in object recognition, and (iii) studies of the anatomical correlates of stored knowledge for living and nonliving things on the brain using magnetoencephalography (MEG). The main empirical findings showed that semantic knowledge about living and nonliving things is principally encoded in terms of sensory and functional features, respectively. In two case-study chapters evidence was found supporting the view that category-specific impairments can arise from damage to a pre-semantic system, rather than the assumption often made that the system involved must be semantic. In the MEG study, rather than finding evidence for the involvement of specific brain areas for different object categories, it appeared that, when subjects named and categorised living and nonliving things, a non-differentiated neural system was involved.

The influence of political, economic and passenger market factors on international civil aviation

Civil aviation plays an essential role in maintaining international communications. Many extraneous factors influence the daily operations of the air transport industry. This thesis begins by investigating the major categories of so­ called "external interests" in civil aviation. These are shown to have played a significant part in ensuring the need for international agreement over the adoption of regulating principles. The combination and interaction of the various influences has produced a particular type of regulatory environment in which all commercial air services have to operate. The need for such regulation and the extreme difficulty experienced in trying to define universally acceptable methods of supervision is discussed. It is shown how opportunity for the development of on-scheduled air services was created by default on the part of the European Governments.The concept of so-called "scheduled" and "non-scheduled" sectors" is considered and it is suggested that growth of the inclusive tour industry resulted from inappropriate categorisation of the air services involved. The means by which development opportunities were created for inclusive tour operations is considered and the work then investigates the importance of British air transport policy in their exploitation. The politics of British civil aviation in the post-war years is the subject of detailed examination and the process by which Independent airlines were encouraged to develop inclusive tours, is identified. This theme is expanded to demonstrate the vital contribution of British air transport policy in the restructuring of the international industry. The subsequent involvement of the United States is shown to have been directed specifically towards the satisfaction of domestic issues. British objectives, however, are considered to have been more generally concerned with improving the tariff structure. The unique opportunities for British experimentation with international fares are seen to have major influence in forcing the pace of tariff rationalisation.

Adolescents and the experience of parental divorce:including reference to the expectations of teacher trainees

The aims of this study were to investigate the impact of parental divorce on adolescents, and the expectations of teacher trainees with regard to children of divorce. The literature related to children of divorce is reviewed and the results of interviews with a sample of recently divorced custodial parents and their adolescent children, using a structured interview schedule, are described. The semantic differential technique was used to obtain ratings of a sample of teacher trainees' expectations of children of divorce as compared with their ratings of several other categories of children. The results of the interviews with parents and their adolescent children suggested that parental divorce does not necessarily interfere with adolescent development and that for some adolescents the reduction of conflict in the home might enhance normal development. They also suggest that adolescents would prefer to live in a one parent home rather than a two parent home which is fraught with conflict, and that it is preferable for parents who are unable to resolve such conflict in any other way to separate rather than allow it to persist. The ratings of children of divorce by teacher trainees suggest that they hold more negative expectations of such children than of other groups • such as adopted children. The contrast between this finding and the results of the interviews with adolescents and their parents lends some support to the existence of the divorce myth; that is, the cultural belief that divorce has the inherent power to make people unhappy. The implications for policy, practice and further research are discussed.

Mixed-frequency testing of induction machines using inverters

This work has concentrated on the testing of induction machines to determine their temperature rise at full-load without mechanically coupling to a load machine. The achievements of this work are outlined as follows. 1. Four distinct categories of mixed-frequency test using an inverter have been identified by the author. The simulation results of these tests as well as the conventional 2-supply test have been analysed in detail. 2. Experimental work on mixed-frequency tests has been done on a small (4 kW) squirrel cage induction machine using a voltage source PWM inverter. Two out of the four categories of test suggested have been tested and the temperature rise results were found to be similar to the results of a direct loading test. Further, one of the categories of test proposed has been performed on a 3.3 kW slip-ring induction machine for the conformation of the rotor values. 3. A low current supply mixed-frequency test-rig has been proposed. For this purpose, a resonant bank was connected to the DC link of the inverter in order to maintain the exchange of power between the test machine and the resonant bank instead of between the main supply and the test machine. The resonant bank was then replaced with a special electro-mechanical energy storage unit. The current of the main power supply was then reduced in amplitude. 4. A variable inertia test for full load temperature rise testing of induction machines has been introduced. This test is purely mechanical in nature and does not require any electrical connection of the test machine to any other machine. It has the advantage of drawing very little net power from the supply.

An exploratory study of the role of trust in medication management within mental health services

Objective - To develop understandings of the nature and influence of trust in the safe management of medication within mental health services. Setting - Mental health services in the UK. Method - Qualitative methods were applied through focus groups across three different categories of service user—older adult, adults living in the community and forensic services. An inductive thematic analysis was carried out, using the method of constant comparison derived from grounded theory. Main Outcome - Measure Participants’ views on the key factors influencing trust and the role of trust in safe medication management. Results - The salient factors impacting trust were: the therapeutic relationship; uncertainty and vulnerability; and social control. Users of mental health services may be particularly vulnerable to adverse events and these can damage trust. Conclusion - Safe management of medication is facilitated by trust. However, this trust may be difficult to develop and maintain, exposing service users to adverse events and worsening adherence. Practice and policy should be oriented towards developing trust.

On the comparative performance of socially responsible and Islamic mutual funds

This is the first study to provide comprehensive analyses of the relative performance of both socially responsible investment (SRI) and Islamic mutual funds. The analysis proceeds in two stages. In the first, the performance of the two categories of funds is measured using partial frontier methods. In the second stage, we use quantile regression techniques.By combining two variants of the Free Disposal Hull (FDH) methods (order-m and order-?) in the first stage of analysis and quantile regression in the second stage, we provide detailed analyses of the impact of different covariates across methods and across different quantiles. In spite of the differences in the screening criteria and portfolio management of both types of funds, variation in the performance is only found for some of the quantiles of the conditional distribution of mutual fund performance. We established that for the most inefficient funds the superior performance of SRI funds is significant. In contrast, for the best mutual funds this evidence vanished and even Islamic funds perform better than SRI.These results show the benefits of performing the analysis using quantile regression.

The influence of context on the strategic decision-making process:a review of the literature

This paper critically reviews the strategic decision-making process literature, with a specific focus on the effects of context. Context refers to the top management team, strategic decision-specific characteristics, the external environment and firm characteristics. This literature review also develops an illustrative framework that incorporates these four different categories of contextual variables that influence the strategic decision-making process. As a result of the variety and pervasiveness of contextual variables featured within the literature, a comprehensive and up-to-date review is essential for organizing and synthesizing the extant literature to explicate an agenda for future research. The purpose of this literature review is threefold: first, to critically review the strategic decision-making process literature to highlight the underlying themes, issues, tensions and debates in the field; second, to identify the opportunities for future theory development; and third, to state the methodological implications arising from this review. © 2013 British Academy of Management and John Wiley & Sons Ltd.

On the comparative performance of socially responsible and Islamic mutual funds

This is the first study to provide comprehensive analyses of the relative performance of both socially responsible investment (SRI) and Islamic mutual funds. The analysis proceeds in two stages. In the first, the performance of the two categories of funds is measured using partial frontier methods. In the second stage, we use quantile regression techniques. By combining two variants of the Free Disposal Hull (FDH) methods (order- m and order- α) in the first stage of analysis and quantile regression in the second stage, we provide detailed analyses of the impact of different covariates across methods and across different quantiles. In spite of the differences in the screening criteria and portfolio management of both types of funds, variation in the performance is only found for some of the quantiles of the conditional distribution of mutual fund performance. We established that for the most inefficient funds the superior performance of SRI funds is significant. In contrast, for the best mutual funds this evidence vanished and even Islamic funds perform better than SRI. These results show the benefits of performing the analysis using quantile regression. © 2013 Elsevier B.V.

Exploring the impact of e-business adoption on logistics processes:empirical evidence from the food industry

The objectives of the research were to identify factors that influence e-business adoption and its impact on logistics processes in the Greek food industry. Drawing on existing research, a conceptual framework and propositions were developed and six in depth case studies were carried out. In the framework, three major categories of influencing factors were distinguished: intra-enterprise, sector and supply chain factors. Findings suggest that e-business adoption is more affected by supply chain and sector factors, rather than intra-enterprise factors. Regarding the impact of e-business on logistics process, it seems that it is affected by the frequency of its use and it is greater in processes occurring at the company-customer interface. Finally, e-business impact is more related to the dimensions of time and quality, rather than cost improvements.

A taxonomy of measures for consumer-based brand equity:drawing on the views of managers in Europe

Purpose: The purpose of this paper is to identify the components of consumer-based brand equity from the perspective of experts in brand management in the UK, Germany and Greece. Design/methodology/approach: Data were collected from semi-structured interviews with senior brand consultants and managers, five in the UK, five in Germany and five in Greece. Findings: The findings suggested four categories of measures which can be used to define brand equity. These are the consumers' understanding of brand characteristics; consumers' brand evaluation; consumers' affective response towards the brand; and consumers' behaviour towards the brand. Specific dimensions are identified as indicators of each category. Research limitations/implications: Although the focus of this study is Europe, data were only collected from the UK, Germany and Greece, countries representing three of the five European cultural clusters. The resultant taxonomy adds to the fragmented literature on brand equity measurement by proposing four categories to gauge brand equity. Practical implications: The suggested taxonomy provides indicators of a framework managers could use when assessing brand equity. Originality/value: There is little agreement on what constitutes brand equity and therefore measures of brand equity are fragmented. To date, the views of practicing managers have not been taken into account in research. This paper draws on the views of practitioners and academics to suggest a taxonomy of categories of measures for brand equity. © Emerald Group Publishing Limited.

Coping with extreme weather:strategies of construction SMEs

Weather extremes have created a considerable impact on Small and Medium-sized Enterprises (SMEs) in the UK during the recent years, especially on SMEs in the construction sector. Evidence in relation to the recent weather extremes have demonstrated that SMEs are some of the worst impacted by the Extreme Weather Events (EWEs) and have confirmed them as a highly vulnerable section of the UK economy to the impact of extreme weather. This is of particular importance to the construction industry, as an overarching majority of construction companies are SMEs who account for the majority of employment and income generation within the industry. Whilst construction has been perceived as a sector significantly vulnerable to the impacts of EWEs, there is scant evidence of how construction SMEs respond to such events and cope with their impact. Based on the evidence emerged from case studies of construction SMEs, current coping strategies of construction SMEs were identified. Some of the strategies identified were focused at organisational level whereas others were focused at project level. Further, some of the strategies were general risk management / business continuity strategies whereas others have been specifically developed to address the risk of EWEs. Accordingly, coping strategies can be broadly categorised based on their focus; i.e. those focused at project or organisational level, and based on the risks that they seek to address; i.e. business / continuity risks in general or EWE risk specifically. By overlapping these two aspects; their focus and risks that they seek to address, four categories of coping strategies can be devised. There are; general risk management strategies focused at business level, general risk management strategies focused at project level, EWE specific strategies focused at business level, and EWE specific strategies focused at project level. It is proposed that for a construction SME to effectively cope with the impact of EWEs and develop their resilience against EWEs a rich mix of these coping strategies are required to suite the particular requirements of the business.