Levantamentos epidemiológicos em saúde bucal: análise da metodologia proposta pela Organização Mundial da Saúde

Epidemiological surveys are important for obtaining information on the prevalence and etiology of mouth diseases, since the data collected permit health actions to be planned, performed, and assessed. Methodological uniformity is necessary, however, to maintain reproductibility, validity, and reliability, and to allow national and international comparisons. The initiative of the World Health Organization (WHO) as an advisor in ongoing surveys has been extremely useful, stimulating standardization in all countries. In 1991, a Portuguese version of the 1987 third edition of Oral Health Surveys - basic methods, an instruction manual for performing epidemiological surveys, was published and became a reference for many parts of Brazil and the World. The present analysis found conflicting points in relation to the sample size, calibration of the examiners, and criteria for evaluating oral health and treatment needs. In conclusion, due to the dynamic characteristics of scientific knowledge and, considering the regional differences in relation to the development of oral diseases, we recommend that proposals for standardizing surveys be checked periodically. Other important issues may have not been detected in this analysis, urging a thorough discussion within the dentistry community as a whole.

Construção e validação do instrumento de investigação do conhecimento de gestantes sobre sua saúde bucal e a do seu bebê: perspectiva do cuidado em saúde

INTRODUCTION: Humanized and quality prenatal and post-partum care is critical to maternal and newborn health, as well as oral health care. Currently, the National Oral Health Policy is aiming at expanding dental care for pregnant women. Thus, the promotion of oral health and attention to prenatal care policies should be integrated; however, there is still limited participation of pregnant women. Thus, it is necessary to verify the knowledge of pregnant women related to oral health, seeking to estimate the quality of dental care provided during prenatal care, being essential for the Family Health strategy to organize personnel, plan costs and to ensure the quality standard of care. OBJECTIVE: To develop and validate a research instrument on the knowledge of pregnant women about their oral health and of their baby. METHOD: This is a construction and validation study with 93 pregnant women in Family Health Units and specialized private clinics in Obstetrics, in the city of Natal / RN. It was authorized by the Onofre Lopes University Hospital Ethics Committee of the Universidade Federal do Rio Grande do Norte (UFRN) under the registration number 421.163/13. The construction of the instrument followed steps so that it was valid, reliable and sensitive: creation and reduction of the items (drafting of the instrument), content validity and testing of the instrument, and hypotheses validation. Once constructed, the instrument was evaluated by experts who suggested modifications. There was consultation with the target population about the new version of the created instrument, which had the instrument validation verified by internal consistency through intra and inter-calibration and test-retest. Next, the hypotheses were validated. A database was built in the Statistical Package for Social Sciences (SPSS), version 22.0. After creating the hypotheses, an association was found for validating the criteria between each of the specific issues for each established criteria, considering a 5% significance level. Data analysis was carried out by describing the absolute and relative frequencies of the variables pertaining to issues relating to their pregnancy knowledge about their oral health and their baby. The Kappa coefficient was used for the calibration process (Inter and Intra-examiner calibration) and Cronbach's alpha coefficient was used to analyze instrument reproducibility (test-retest). In addition, the chi-square test was used to cross the dependent variable with the (dichotomized) independent variables. RESULTS: The intra and inter agreement analysis presented a Kappa coefficient between 0.400 and 1.000. Internal consistency through the analysis showed that 90% of the instrument's questions showed great reliability in the answers (Cronbach α ˃ 0.7). In the investigation of the relationship between the dependent variable (knowledge about oral health) and the independent variables (trimester of pregnancy, education, income and multiparous), it was found that none of these independent variables were significantly associated. All hypotheses had their Ho confirmed. CONCLUSION: The constructed instrument was validated, considering that it showed to be sensitive with good reliability and good accuracy, and therefore can be used to assess pregnant women’s knowledge about their oral health and the oral health of their baby.

Construção e validação do instrumento de investigação do conhecimento de gestantes sobre sua saúde bucal e a do seu bebê: perspectiva do cuidado em saúde

INTRODUCTION: Humanized and quality prenatal and post-partum care is critical to maternal and newborn health, as well as oral health care. Currently, the National Oral Health Policy is aiming at expanding dental care for pregnant women. Thus, the promotion of oral health and attention to prenatal care policies should be integrated; however, there is still limited participation of pregnant women. Thus, it is necessary to verify the knowledge of pregnant women related to oral health, seeking to estimate the quality of dental care provided during prenatal care, being essential for the Family Health strategy to organize personnel, plan costs and to ensure the quality standard of care. OBJECTIVE: To develop and validate a research instrument on the knowledge of pregnant women about their oral health and of their baby. METHOD: This is a construction and validation study with 93 pregnant women in Family Health Units and specialized private clinics in Obstetrics, in the city of Natal / RN. It was authorized by the Onofre Lopes University Hospital Ethics Committee of the Universidade Federal do Rio Grande do Norte (UFRN) under the registration number 421.163/13. The construction of the instrument followed steps so that it was valid, reliable and sensitive: creation and reduction of the items (drafting of the instrument), content validity and testing of the instrument, and hypotheses validation. Once constructed, the instrument was evaluated by experts who suggested modifications. There was consultation with the target population about the new version of the created instrument, which had the instrument validation verified by internal consistency through intra and inter-calibration and test-retest. Next, the hypotheses were validated. A database was built in the Statistical Package for Social Sciences (SPSS), version 22.0. After creating the hypotheses, an association was found for validating the criteria between each of the specific issues for each established criteria, considering a 5% significance level. Data analysis was carried out by describing the absolute and relative frequencies of the variables pertaining to issues relating to their pregnancy knowledge about their oral health and their baby. The Kappa coefficient was used for the calibration process (Inter and Intra-examiner calibration) and Cronbach's alpha coefficient was used to analyze instrument reproducibility (test-retest). In addition, the chi-square test was used to cross the dependent variable with the (dichotomized) independent variables. RESULTS: The intra and inter agreement analysis presented a Kappa coefficient between 0.400 and 1.000. Internal consistency through the analysis showed that 90% of the instrument's questions showed great reliability in the answers (Cronbach α ˃ 0.7). In the investigation of the relationship between the dependent variable (knowledge about oral health) and the independent variables (trimester of pregnancy, education, income and multiparous), it was found that none of these independent variables were significantly associated. All hypotheses had their Ho confirmed. CONCLUSION: The constructed instrument was validated, considering that it showed to be sensitive with good reliability and good accuracy, and therefore can be used to assess pregnant women’s knowledge about their oral health and the oral health of their baby.

Ajustes de coeficientes integrantes de processos físicos e bioquímicos na autedepuração em curso de água de médio porte

The mathematical modeling in the simulation of self-purification capacity in lotic environment is an important tool in the planning and management of hydric resources in hydrographic basin scale. It satisfactorily deals with the self-purification process when the coefficients of physical and biochemical processes are calibrated from monitorated water quality data, which was the main focus of this study. The present study was conducted to simulate the behavior of the parameters OD, BOD5, total phosphorus, E. coli, ammonia, nitrite, nitrate and the total metals cadmium, chromium, copper, lead and zinc in the Uberabinha’s lower course (with an approximate annual growth flow between 4-35 m3/s), in a stretch of 19 km downstream of the treated effluent release by the WWTP of the city. The modelings, on the present study, show the importance of constant water quality parameters monitoration over the water course, based on the comparison of the simulations from calibrated coefficients and coefficients obtained in the literature for the period of June until November 2015. After coefficients calibration, there were good adjustments between simulated and measured data for the parameters OD, BOD, Ptotal, ammonia and nitrate and unsatisfactory adjust for the parameters nitrite and E. coli. About the total metals, the adjustments were not satisfactory on the reservoir’s vicinity of the Small Hydropower Plant Martins, due the considerable increase of the bottom sediment in lentic region. The greatest scientific contribution of this study was to calibrate the decay coefficient K and the quantification of the release by the fund S of total metals in watercourse midsize WWTP pollutant load receptor, justified by the lack of studies in the literature about the subject. For the metals cadmium, chromium, copper, lead and zinc, the borderline for K and S calibrated were: 0.0 to 13.0 day-1 and 0.0 to 1.7 g/m3.day; 0.0 to 0.9 day-1 and 0.0 to 7.3 g/m3.day; 0.0 to 25.0 day-1 and 0.0 to 1.8 g/m3.day; 0.0 to 7.0 day-1 and 0.0 to 40.3 g/m3.day; 0.0 to 30.0 day-1 and 0.0 to 70.1 g/m3.day.

Preparação e caracterização de biomateriais poliméricos para avaliação da viabilidade de uso como phantom biológico

The theoretical and experimental developments in the biomaterials area have been directly applied to different fields of Medicine (odontology, regenerative medicine and radiotherapy). These advances have focused both for diagnosing diseases such as for quantifying degrees of progression. From the perspective of these studies, biomaterials are being designed and manufactured for application in various areas of science, provided advances in diagnostic radiology, radiotherapy dosimetry and calibration of radiotherapy equipment. Develop a phantom from a biomaterial has become a great ally of medicine in the treat patients with oncological diseases, allowing better performance of the equipment in order to reduce damage to healthy tissue due to excessive exposure to radiation. This work used polymers: chitosan and gelatin, for making the polymeric structures and controlled for different types of production and processing, characterizing and evaluating the biopolymer by physical techniques (STL, SEM and DEI) and therefore analyze applicability as phantom mouse lung. It was possible to evaluate the morphology of biomaterials quantitatively by scanning electron microscopy associated with imaging technique. The relevance of this work focuses on developing a phantom from polymeric biomaterials that can act as phantom providing high image contrast when subjected to analysis. Thus, the choice of DEI technique is satisfactory since it is an imaging technique of X-ray high resolution. The images obtained by DEI have shown the details of the internal microstructure of the biomaterial produced which have ≈ 10 μm dimension. The phantoms had made density ranging from 0.08 a 0.13 g/cm3.

Avaliação da incerteza de medição no Setor Médico-hospitalar

This study aims to evaluate the uncertainty associated with measurements made by aneroid sphygmomanometer, neonatal electronic balance and electrocautery. Therefore, were performing repeatability tests on all devices for the subsequent execution of normality tests using Shapiro-Wilk; identification of influencing factors that affect the measurement result of each measurement; proposition of mathematical models to calculate the measurement uncertainty associated with measuring evaluated for all equipament and calibration for neonatal electronic balance; evaluation of the measurement uncertainty; and development of a computer program in Java language to systematize the calibration uncertainty of estimates and measurement uncertainty. It was proposed and carried out 23 factorial design for aneroid sphygmomanometer order to investigate the effect of temperature factors, patient and operator and another 32 planning for electrocautery, where it investigated the effects of temperature factors and output electrical power. The expanded uncertainty associated with the measurement of blood pressure significantly reduced the extent of the patient classification tracks. In turn, the expanded uncertainty associated with the mass measurement with neonatal balance indicated a variation of about 1% in the dosage of medication to neonates. Analysis of variance (ANOVA) and the Turkey test indicated significant and indirectly proportional effects of temperature factor in cutting power values and clotting indicated by electrocautery and no significant effect of factors investigated for aneroid sphygmomanometer.

Determinação de teor de biodieseis de algodão e pinhão manso em misturas com diesel usando espectroscopia no infravermelho médio e quadrados mínimos parciais

Biodiesel is a renewable fuel derived from vegetable oils or animal fats, which can be a total or partial substitute for diesel. Since 2005, this fuel was introduced in the Brazilian energy matrix through Law 11.097 that determines the percentage of biodiesel added to diesel oil as well as monitoring the insertion of this fuel in market. The National Agency of Petroleum, Natural Gas and Biofuels (ANP) establish the obligation of adding 7% (v/v) of biodiesel to diesel commercialized in the country, making crucial the analytical control of this content. Therefore, in this study were developed and validated methodologies based on the use of Mid Infrared Spectroscopy (MIR) and Multivariate Calibration by Partial Least Squares (PLS) to quantify the methyl and ethyl biodiesels content of cotton and jatropha in binary blends with diesel at concentration range from 1.00 to 30.00% (v/v), since this is the range specified in standard ABNT NBR 15568. The biodiesels were produced from two routes, using ethanol or methanol, and evaluated according to the parameters: oxidative stability, water content, kinematic viscosity and density, presenting results according to ANP Resolution No. 45/2014. The built PLS models were validated on the basis of ASTM E1655-05 for Infrared Spectroscopy and Multivariate Calibration and ABNT NBR 15568, with satisfactory results due to RMSEP (Root Mean Square Error of Prediction) values below 0.08% (<0.1%), correlation coefficients (R) above 0.9997 and the absence of systematic error (bias). Therefore, the methodologies developed can be a promising alternative in the quality control of this fuel.

La vérité polyphonique : la problématisation théorique et pratique de la dichotomie entre fiction et documentaire, précédé du film YT Remix

La création cinématographique de l’étudiante qui accompagne ce mémoire sous la forme d’un DVD est disponible à la Médiathèque de la Bibliothèque des lettres et sciences humaines sous le titre : YT Remix (documentaire) ; Sonorisation d'un extrait de L'homme à la caméra (D. Vertov).(https://umontreal.on.worldcat.org/oclc/957316713)

La vérité polyphonique : la problématisation théorique et pratique de la dichotomie entre fiction et documentaire, précédé du film YT Remix

La création cinématographique de l’étudiante qui accompagne ce mémoire sous la forme d’un DVD est disponible à la Médiathèque de la Bibliothèque des lettres et sciences humaines sous le titre : YT Remix (documentaire) ; Sonorisation d'un extrait de L'homme à la caméra (D. Vertov).(http://atrium.umontreal.ca/notice/UM-ALEPH002370775)

Intermédialité et déconstruction de la fiction chez Alain Robbe-Gillet - Analyse comparative de "La maison de rendez-vous" et de "L'homme qui ment"

Alain Robbe-Grillet, d’abord connu en tant que romancier, a dès le début des années 1960 partagé son temps entre le cinéma et la littérature. Après avoir fourni le scénario de L’année dernière à Marienbad, il est passé derrière la caméra et a réalisé une dizaine de films qui, tant par leur forme que leur propos, poursuivent les recherches esthétiques entreprises dans sa pratique littéraire. Plus encore, il nous semble que le début de cette aventure cinématographique marque un tournant dans son œuvre. Alors que le point de vue qui portait les premiers romans — point de vue que les critiques ont rapproché de celui d’une caméra —, marquait déjà la dimension intermédiale de son œuvre, il apparaît que son passage dans la chaise du réalisateur a été le germe d’une radicalisation de sa pratique. Ainsi, les romans et les films qui ont suivi possèdent une portée intermédiale beaucoup plus large. De fait, c’est l’ensemble de la narration qui s’y trouve remise en question par la mise en évidence des spécificités de chacun des médias et par la transposition de procédés propres à la littérature dans le film, et vice versa. C’est par une étude comparative de La maison de rendez-vous (1965) et de L’homme qui ment (1968) que nous montrons en quoi consiste la relation intermédiale que Robbe-Grillet établit entre les disciplines, en plus de mettre en évidence les mécaniques qui, ancrées dans la matérialité des médias, fondent le roman et le film.

Vers un modèle unifié pour l'affichage autostéréoscopique d'images

Dans un premier chapitre, nous décrivons un modèle de formation d’image affichée sur un écran en revenant sur les concepts que sont la lumière, la géométrie et l’optique. Nous détaillons ensuite les différentes techniques d’affichage stéréoscopique utilisées à l’heure actuelle, en parcourant la stéréoscopie, l’autostéréoscopie et plus particulièrement le principe d’imagerie intégrale. Le deuxième chapitre introduit un nouveau modèle de formation d’image stéréoscopique. Ce dernier nous permet d’observer deux images d’une paire stéréoscopique soumises à des éventuelles transformations et à l’effet d’une ou de plusieurs optiques particulières, pour reproduire la perception de trois dimensions. Nous abordons l’aspect unificateur de ce modèle. En effet il permet de décrire et d’expliquer de nombreuses techniques d’affichage stéréoscopique existantes. Enfin, dans un troisième chapitre nous discutons d’une méthode particulière de création de paires d’images stéréoscopiques à l’aide d’un champ lumineux.

Dynamique des ambiances lumineuses - approche basée sur la photométrie vidéo d’espaces de transition

Les variations de la lumière naturelle lors du passage d’un espace à un autre caractérisent de manière complexe, mais importante le design d’un bâtiment. Cette adaptation visuelle s’inscrit dans un processus spatiotemporel et influe sur le confort et le bien-être de ses occupants. La littérature fait état du peu de connaissances de la relation lumière espace-temps. Cette recherche propose donc d’étudier cette relation spatio-temporelle existant entre la lumière et l’espace, afin de qualifier un parcours architectural au moyen d’une expérimentation in situ et de segments filmiques. La recherche combine l’utilisation d’un luminance-mètre, d’une caméra vidéo et d’une méthode d’analyse d’images numériques afin de permettre l’évaluation des qualités spatio-temporelles de la lumière. Le parcours architectural est analysé selon la diversité et l’intensité des ambiances lumineuses en fonction du temps permettant de décrire les perceptions visuelles d’espaces transitions. Cette méthode dynamique offre un potentiel d’analyse et de création aux concepteurs désireux d’enrichir le design de séquences spatiales en favorisant la diversité lumineuse dans l’expérience architecturale. Mots clefs: adaptation visuelle, analyse d’images, ambiance lumineuse, contraste, éclairage naturel, espaces transitions, lumière perception visuelle, vidéo, spatio-temporel.

On precise three-dimensional environment modeling via UAV-based photogrammetric systems

Abstract : Images acquired from unmanned aerial vehicles (UAVs) can provide data with unprecedented spatial and temporal resolution for three-dimensional (3D) modeling. Solutions developed for this purpose are mainly operating based on photogrammetry concepts, namely UAV-Photogrammetry Systems (UAV-PS). Such systems are used in applications where both geospatial and visual information of the environment is required. These applications include, but are not limited to, natural resource management such as precision agriculture, military and police-related services such as traffic-law enforcement, precision engineering such as infrastructure inspection, and health services such as epidemic emergency management. UAV-photogrammetry systems can be differentiated based on their spatial characteristics in terms of accuracy and resolution. That is some applications, such as precision engineering, require high-resolution and high-accuracy information of the environment (e.g. 3D modeling with less than one centimeter accuracy and resolution). In other applications, lower levels of accuracy might be sufficient, (e.g. wildlife management needing few decimeters of resolution). However, even in those applications, the specific characteristics of UAV-PSs should be well considered in the steps of both system development and application in order to yield satisfying results. In this regard, this thesis presents a comprehensive review of the applications of unmanned aerial imagery, where the objective was to determine the challenges that remote-sensing applications of UAV systems currently face. This review also allowed recognizing the specific characteristics and requirements of UAV-PSs, which are mostly ignored or not thoroughly assessed in recent studies. Accordingly, the focus of the first part of this thesis is on exploring the methodological and experimental aspects of implementing a UAV-PS. The developed system was extensively evaluated for precise modeling of an open-pit gravel mine and performing volumetric-change measurements. This application was selected for two main reasons. Firstly, this case study provided a challenging environment for 3D modeling, in terms of scale changes, terrain relief variations as well as structure and texture diversities. Secondly, open-pit-mine monitoring demands high levels of accuracy, which justifies our efforts to improve the developed UAV-PS to its maximum capacities. The hardware of the system consisted of an electric-powered helicopter, a high-resolution digital camera, and an inertial navigation system. The software of the system included the in-house programs specifically designed for camera calibration, platform calibration, system integration, onboard data acquisition, flight planning and ground control point (GCP) detection. The detailed features of the system are discussed in the thesis, and solutions are proposed in order to enhance the system and its photogrammetric outputs. The accuracy of the results was evaluated under various mapping conditions, including direct georeferencing and indirect georeferencing with different numbers, distributions and types of ground control points. Additionally, the effects of imaging configuration and network stability on modeling accuracy were assessed. The second part of this thesis concentrates on improving the techniques of sparse and dense reconstruction. The proposed solutions are alternatives to traditional aerial photogrammetry techniques, properly adapted to specific characteristics of unmanned, low-altitude imagery. Firstly, a method was developed for robust sparse matching and epipolar-geometry estimation. The main achievement of this method was its capacity to handle a very high percentage of outliers (errors among corresponding points) with remarkable computational efficiency (compared to the state-of-the-art techniques). Secondly, a block bundle adjustment (BBA) strategy was proposed based on the integration of intrinsic camera calibration parameters as pseudo-observations to Gauss-Helmert model. The principal advantage of this strategy was controlling the adverse effect of unstable imaging networks and noisy image observations on the accuracy of self-calibration. The sparse implementation of this strategy was also performed, which allowed its application to data sets containing a lot of tie points. Finally, the concepts of intrinsic curves were revisited for dense stereo matching. The proposed technique could achieve a high level of accuracy and efficiency by searching only through a small fraction of the whole disparity search space as well as internally handling occlusions and matching ambiguities. These photogrammetric solutions were extensively tested using synthetic data, close-range images and the images acquired from the gravel-pit mine. Achieving absolute 3D mapping accuracy of 11±7 mm illustrated the success of this system for high-precision modeling of the environment.

Caractérisation de minéraux indicateurs par imagerie hyperspectrale et traitement de l'image dans l'infrarouge proche et l'infrarouge lointain

L’imagerie hyperspectrale (HSI) fournit de l’information spatiale et spectrale concernant l’émissivité de la surface des matériaux, ce qui peut être utilisée pour l’identification des minéraux. Pour cela, un matériel de référence ou endmember, qui en minéralogie est la forme la plus pure d’un minéral, est nécessaire. L’objectif principal de ce projet est l’identification des minéraux par imagerie hyperspectrale. Les informations de l’imagerie hyperspectrale ont été enregistrées à partir de l’énergie réfléchie de la surface du minéral. L’énergie solaire est la source d’énergie dans l’imagerie hyperspectrale de télédétection, alors qu’un élément chauffant est la source d’énergie utilisée dans les expériences de laboratoire. Dans la première étape de ce travail, les signatures spectrales des minéraux purs sont obtenues avec la caméra hyperspectrale, qui mesure le rayonnement réfléchi par la surface des minéraux. Dans ce projet, deux séries d’expériences ont été menées dans différentes plages de longueurs d’onde (0,4 à 1 µm et 7,7 à 11,8 µm). Dans la deuxième partie de ce projet, les signatures spectrales obtenues des échantillons individuels sont comparées avec des signatures spectrales de la bibliothèque hyperspectrale de l’ASTER. Dans la troisième partie, trois méthodes différentes de classification hyperspectrale sont considérées pour la classification. Spectral Angle Mapper (SAM), Spectral Information Divergence (SID), et Intercorrélation normalisée (NCC). Enfin, un système d’apprentissage automatique, Extreme Learning Machine (ELM), est utilisé pour identifier les minéraux. Deux types d’échantillons ont été utilisés dans ce projet. Le système d’ELM est divisé en deux parties, la phase d’entraînement et la phase de test du système. Dans la phase d’entraînement, la signature d’un seul échantillon minéral est entrée dans le système, et dans la phase du test, les signatures spectrales des différents minéraux, qui sont entrées dans la phase d’entraînement, sont comparées par rapport à des échantillons de minéraux mixtes afin de les identifier.

Dialectique des regards - l’autre et la construction du récit de soi dans l’auto-filmage pathographique

Le présent mémoire entend analyser la pratique de l’auto-filmage dans deux films : La Pudeur ou l’impudeur (Hervé Guibert) et Tarnation (Jonathan Caouette). Nous regroupons ces long-métrages sous l’étiquette « auto-filmage pathographique ». Le malade, s’émancipant de l’imagerie médicale et des pratiques cinématographiques institutionnelles, reprend l’image filmique à son compte, aidé en cela par une technologie toujours plus ergonomique. Cette résurgence de l’image du corps malade dans le champ social ne se fait pas sans heurt ; l’exposition de corps décharnés et agoniques convoque un imaginaire catastrophiste et contredit les rituels d’effacement du corps auxquels procède la société occidentale. La forme que prend le récit de soi dans l’auto-filmage pathographique dépend de la maladie qui affecte chaque créateur. Nous observons une redéfinition de la sincérité, en lien avec l’exercice autobiographique. Il s’agit d’utiliser, dans l’auto-filmage pathographique, certains procédés fictionnels pour créer un discours sur soi-même dont la véracité repose sur d’autres critères que ceux communément admis. L’auto-filmage pathographique suppose en ce sens un véritable changement d’attitude et la mise en place de techniques de soi. Il induit une forme de réconciliation avec sa propre identité physique et psychique. En cela, l’écriture filmique de soi est un agent transformateur de la vie et un exercice spirituel. Les réalisateurs ne sont cependant pas uniquement tournés vers eux-mêmes. Chacun inclut quelques privilégiés au coeur de sa démarche. Le soin de soi, dans l’auto-filmage pathographique, ne se désolidarise pas du soin des autres. Auto-filmage et caméra subjective entretiennent un lien dialectique qui donne son sens à l’auto-filmage pathographique et voit leur antagonisme éclater. L’individu s’auto-filmant n’est pas seul ; sa démarche n’est pas qu’un solipsisme. Elle se voit dépassée par l’émergence de l’autre dans le champ ou parfois même, sa prise en main de la caméra.