A cohort study of routinely used sepsis biomarkers and 28-day mortality.

The evaluation of sepsis severity is complicated by the highly variable and nonspecific nature of clinical signs and symptoms. We studied routinely used biomarkers together with clinical parameters to compare their prognostic value for severe sepsis and evaluate their usefulness.

Dual-channel electrospray microchip.

A dual-channel electrospray microchip has been developed for electrospray ionization mass spectrometry (ESI-MS) where aqueous samples are mixed at the Taylor cone with an organic buffer. Due to the fast and effective mixing in the Taylor cone, the aqueous sample can be well ionized with a high ion intensity. The influence of geometric parameters such as the distance between the two microchannels at their junction at the tip of the emitter has been investigated together with chemical parameters such as the organic buffer composition.

A Nested Case-Control Study of Metabolically Defined Body Size Phenotypes and Risk of Colorectal Cancer in the European Prospective Investigation into Cancer and Nutrition (EPIC).

BACKGROUND Obesity is positively associated with colorectal cancer. Recently, body size subtypes categorised by the prevalence of hyperinsulinaemia have been defined, and metabolically healthy overweight/obese individuals (without hyperinsulinaemia) have been suggested to be at lower risk of cardiovascular disease than their metabolically unhealthy (hyperinsulinaemic) overweight/obese counterparts. Whether similarly variable relationships exist for metabolically defined body size phenotypes and colorectal cancer risk is unknown. METHODS AND FINDINGS The association of metabolically defined body size phenotypes with colorectal cancer was investigated in a case-control study nested within the European Prospective Investigation into Cancer and Nutrition (EPIC) study. Metabolic health/body size phenotypes were defined according to hyperinsulinaemia status using serum concentrations of C-peptide, a marker of insulin secretion. A total of 737 incident colorectal cancer cases and 737 matched controls were divided into tertiles based on the distribution of C-peptide concentration amongst the control population, and participants were classified as metabolically healthy if below the first tertile of C-peptide and metabolically unhealthy if above the first tertile. These metabolic health definitions were then combined with body mass index (BMI) measurements to create four metabolic health/body size phenotype categories: (1) metabolically healthy/normal weight (BMI < 25 kg/m2), (2) metabolically healthy/overweight (BMI ≥ 25 kg/m2), (3) metabolically unhealthy/normal weight (BMI < 25 kg/m2), and (4) metabolically unhealthy/overweight (BMI ≥ 25 kg/m2). Additionally, in separate models, waist circumference measurements (using the International Diabetes Federation cut-points [≥80 cm for women and ≥94 cm for men]) were used (instead of BMI) to create the four metabolic health/body size phenotype categories. Statistical tests used in the analysis were all two-sided, and a p-value of <0.05 was considered statistically significant. In multivariable-adjusted conditional logistic regression models with BMI used to define adiposity, compared with metabolically healthy/normal weight individuals, we observed a higher colorectal cancer risk among metabolically unhealthy/normal weight (odds ratio [OR] = 1.59, 95% CI 1.10-2.28) and metabolically unhealthy/overweight (OR = 1.40, 95% CI 1.01-1.94) participants, but not among metabolically healthy/overweight individuals (OR = 0.96, 95% CI 0.65-1.42). Among the overweight individuals, lower colorectal cancer risk was observed for metabolically healthy/overweight individuals compared with metabolically unhealthy/overweight individuals (OR = 0.69, 95% CI 0.49-0.96). These associations were generally consistent when waist circumference was used as the measure of adiposity. To our knowledge, there is no universally accepted clinical definition for using C-peptide level as an indication of hyperinsulinaemia. Therefore, a possible limitation of our analysis was that the classification of individuals as being hyperinsulinaemic-based on their C-peptide level-was arbitrary. However, when we used quartiles or the median of C-peptide, instead of tertiles, as the cut-point of hyperinsulinaemia, a similar pattern of associations was observed. CONCLUSIONS These results support the idea that individuals with the metabolically healthy/overweight phenotype (with normal insulin levels) are at lower colorectal cancer risk than those with hyperinsulinaemia. The combination of anthropometric measures with metabolic parameters, such as C-peptide, may be useful for defining strata of the population at greater risk of colorectal cancer.

Runaway Greenhouse Effect in a Semigray Radiative-Convective Model

The effects of the nongray absorption (i.e., atmospheric opacity varying with wavelength) on the possible upper bound of the outgoing longwave radiation (OLR) emitted by a planetary atmosphere have been examined. This analysis is based on the semigray approach, which appears to be a reasonable compromise between the complexity of nongray models and the simplicity of the gray assumption (i.e., atmospheric absorption independent of wavelength). Atmospheric gases in semigray atmospheres make use of constant absorption coefficients in finite-width spectral bands. Here, such a semigray absorption is introduced in a one-dimensional (1D) radiative– convective model with a stratosphere in radiative equilibrium and a troposphere fully saturated with water vapor, which is the semigray gas. A single atmospheric window in the infrared spectrum has been assumed. In contrast to the single absolute limit of OLR found in gray atmospheres, semigray ones may also show a relative limit. This means that both finite and infinite runaway effects may arise in some semigray cases. Of particular importance is the finding of an entirely new branch of stable steady states that does not appear in gray atmospheres. This new multiple equilibrium is a consequence of the nongray absorption only. It is suspected that this new set of stable solutions has not been previously revealed in analyses of radiative–convective models since it does not appear for an atmosphere with nongray parameters similar to those for the earth’s current state

Hybrid PET/MRI in the assessment of cardiac viability: added value compared to PET/CT

Purpose: We evaluated the potential for hybrid PET/MRI devices to provide integrated metabolic, functional and anatomic characterisation of patients with suspected coronary artery disease.Methods and Materials: Ten patients (5 with suspected hibernating myocardium and 5 healthy volunteers) performed an imaging study using a hybrid PET/MRI (Philips). Viability assessed by 18F-FDG was performed in diseased patients along with MRI anatomic and functional study and reassessed within 30 minutes by conventional PET/CT. Non-contrast right coronary artery (RCA) targeted and whole heart 3D coronary angio-MRI using ECG-gating and respiratory navigator was performed in healthy volunteers with reconstruction performed using MPR and volume rendering. The extent of metabolic defect (MD) using PET/MRI and PET/CT was compared in patients and coronary territories (LAD, CX, RCA). Assessability of coronary lumen was judged as good, sub-optimal or non-assessable using a 16-segments coronary model.Results: Metabolic assessment was successful in all patients with MD being 19.2% vs 18.3% using PET/MRI and PET/CT, respectively (P=ns). The MD was 10.2%, 6 %, and 3 % vs 9.3%, 6 % and 3 % for LAD, CX and RCA territories, respectively (P= ns). Coronary angio-MRI was successful in all volunteers with 66 coronary segments visualised overall. The RCA was fully visualised in 4/5 volunteers and the left coronary arteries in 4/5 volunteers. Assessability in visualised segments was good, sub-optimal and non-assessable in 88 %, 2 % and 10 %, respectively.Conclusion: Hybrid PET/MRI devices may enable metabolic evaluation comparable to PET/CT with additional value owing to accurate functional and anatomical information including coronary assessment.

Developing Smooth, Quiet, Safe Portland Cement Concrete Pavements, March 2004

The concrete paving industry has spent large amounts of time working to provide safe, quiet, and smooth pavements for the traveling public as their needs and driving habits have changed since the advent of the automobile. During that time, the efforts of research, design, and construction were directed at one of the problems at a time. Current public surveys indicate that the traveling public wishes to have safe, quiet, and smooth pavements. This report identifies the problems remaining in the areas of developing smooth, quiet, and safe portland cement concrete pavement in each pavement we build. It develops the research framework that can be used to bring the existing information together with additional research in each area. The resulting answers can be used in each pavement design for a quiet, safe, and smooth pavement that is also long lasting.

Evalution of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment, July 2005

Moisture sensitivity of Hot Mix Asphalt (HMA) mixtures, generally called stripping, is a major form of distress in asphalt concrete pavement. It is characterized by the loss of adhesive bond between the asphalt binder and the aggregate (a failure of the bonding of the binder to the aggregate) or by a softening of the cohesive bonds within the asphalt binder (a failure within the binder itself), both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of HMA moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was undertaken to develop a protocol for evaluating the moisture sensitivity potential of HMA mixtures using the Nottingham Asphalt Tester (NAT). The mechanisms of HMA moisture sensitivity were reviewed and the test protocols using the NAT were developed. Different types of blends as moisture-sensitive groups and non-moisture-sensitive groups were used to evaluate the potential of the proposed test. The test results were analyzed with three parameters based on performance character: the retained flow number depending on critical permanent deformation failure (RFNP), the retained flow number depending on cohesion failure (RFNC), and energy ratio (ER). Analysis based on energy ratio of elastic strain (EREE ) at flow number of cohesion failure (FNC) has higher potential to evaluate the HMA moisture sensitivity than other parameters. If the measurement error in data-acquisition process is removed, analyses based on RFNP and RFNC would also have high potential to evaluate the HMA moisture sensitivity. The vacuum pressure saturation used in AASHTO T 283 and proposed test has a risk to damage specimen before the load applying.

Adverse selection, credit, and efficiency: the case of the missing market

We analyze a standard environment of adverse selection in credit markets. In our environment, entrepreneurs who are privately informed about the quality of their projects need to borrow in order to invest. Conventional wisdom says that, in this class of economies, the competitive equilibrium is typically inefficient. We show that this conventional wisdom rests on one implicit assumption: entrepreneurs can only access monitored lending. If a new set of markets is added to provide entrepreneurs with additional funds, efficiency can be attained in equilibrium. An important characteristic of these additional markets is that lending in them must be unmonitored, in the sense that it does not condition total borrowing or investment by entrepreneurs. This makes it possible to attain efficiency by pooling all entrepreneurs in the new markets while separating them in the markets for monitored loans.

CT arthrography of the glenohumeral joint: CT fluoroscopy versus conventional CT and fluoroscopy--comparison of image-guidance techniques.

PURPOSE: To compare examination time with radiologist time and to measure radiation dose of computed tomographic (CT) fluoroscopy, conventional CT, and conventional fluoroscopy as guiding modalities for shoulder CT arthrography. MATERIALS AND METHODS: Glenohumeral injection of contrast material for CT arthrography was performed in 64 consecutive patients (mean age, 32 years; age range, 16-74 years) and was guided with CT fluoroscopy (n = 28), conventional CT (n = 14), or conventional fluoroscopy (n = 22). Room times (arthrography, room change, CT, and total examination times) and radiologist times (time the radiologist spent in the fluoroscopy or CT room) were measured. One-way analysis of variance and Bonferroni-Dunn posthoc tests were performed for comparison of mean times. Mean effective radiation dose was calculated for each method with examination data, phantom measurements, and standard software. RESULTS: Mean total examination time was 28.0 minutes for CT fluoroscopy, 28.6 minutes for conventional CT, and 29.4 minutes for conventional fluoroscopy; mean radiologist time was 9.9 minutes, 10.5 minutes, and 9.0 minutes, respectively. These differences were not statistically significant. Mean effective radiation dose was 0.0015 mSv for conventional fluoroscopy (mean, nine sections), 0.22 mSv for CT fluoroscopy (120 kV; 50 mA; mean, 15 sections), and 0.96 mSv for conventional CT (140 kV; 240 mA; mean, six sections). Effective radiation dose can be reduced to 0.18 mSv for conventional CT by changing imaging parameters to 120 kV and 100 mA. Mean effective radiation dose of the diagnostic CT arthrographic examination (140 kV; 240 mA; mean, 25 sections) was 2.4 mSv. CONCLUSION: CT fluoroscopy and conventional CT are valuable alternative modalities for glenohumeral CT arthrography, as examination and radiologist times are not significantly different. CT guidance requires a greater radiation dose than does conventional fluoroscopy, but with adequate parameters CT guidance constitutes approximately 8% of the radiation dose.

PEG-b-PPS diblock copolymer aggregates for hydrophobic drug solubilization and release: cyclosporin A as an example

Micelles formed from amphiphilic block copolymers have been explored in recent years as carriers for hydrophobic drugs. In an aqueous environment, the hydrophobic blocks form the core of the micelle, which can host lipophilic drugs, while the hydrophilic blocks form the corona or outer shell and stabilize the interface between the hydrophobic core and the external medium. In the present work, mesophase behavior and drug encapsulation were explored in the AB block copolymeric amphiphile composed of poly(ethylene glycol) (PEG) as a hydrophile and poly(propylene sulfide) PPS as a hydrophobe, using the immunosuppressive drug cyclosporin A (CsA) as an example of a highly hydrophobic drug. Block copolymers with a degree of polymerization of 44 on the PEG and of 10, 20 and 40 on the PPS respectively (abbreviated as PEG44-b-PPS10, PEG44-b-PPS20, PEG44-b-PPS40) were synthesized and characterized. Drug-loaded polymeric micelles were obtained by the cosolvent displacement method as well as the remarkably simple method of dispersing the warm polymer melt, with drug dissolved therein, in warm water. Effective drug solubility up to 2 mg/mL in aqueous media was facilitated by the PEG- b-PPS micelles, with loading levels up to 19% w/w being achieved. Release was burst-free and sustained over periods of 9-12 days. These micelles demonstrate interesting solubilization characteristics, due to the low glass transition temperature, highly hydrophobic nature, and good solvent properties of the PPS block

Avaliação da infestação de insetos-praga associados à batata (Solanum tuberosum L.) sob efeito de nutrientes nitrogenados e potássicos e teores acumulados de aminoácidos livres nas cultivares Achat e Monalisa

Evaluation of insect-pest infestation associated to potato (Solanum tuberosum L.) under effect of nitrogen and potassium fertilizers and the accumulated amount of free aminoacids in Achat and Monalisa cultivars. The objective of this work was to evaluate the occurence of insect-pests on potato plants influenced by dosages of nitrogen and potassium accumulated in plant organs. A total of 169 plants of the Achat and Monalisa cultivars were evaluated to determine the presence-absence of Diabrotica speciosa Germar, 1824 and Agrotis ipsilon Hüfnagel, 1767. The experiment was carried out and executed at the Universidade Federal Fluminense, and the delineation was complete randomized block design, with four replication and nine treatments, using three fertilization level (0; 75 and 150 Kg/ha) with N-urea + KCl. The aminoacid levels were adjusted by the Leucine standard-curve (µg/l), using the Ninhydrin method, at 570 nm. The results showed that the tubercles of Monalisa accumulated high free aminoacid levels with 7,95% in the treatment N1K2 and 7,75% in the N2K1.These treatments, induced the infestation by D. speciosa larvae in 27,03%, when the aminoacid level was 2,01 ± 0,58% (X ± EP), with probability of 0,0196with long dry periods.

Planeamento de Experiências: Modelos e desafios dos Planos em Blocos Incompletos

O principal objetivo de um Planeamento de Experiências reside essencialmente na procura de relações entre variáveis e na comparação de níveis de fatores, recorrendo ao tratamento estatístico dos dados recolhidos. A utilização de blocos no Planeamento de Experiências é fundamental, pois permite reduzir ou eliminar a variabilidade introduzida por fatores que podem influenciar a experiência mas que não interessam e/ou não foram explicitamente incluídos durante o planeamento. Neste trabalho apresentamos os resultados do estudo e investigação dos Planos em Blocos Incompletos Equilibrados (BIBD), Planos em Blocos Incompletos Equilibrados com repetição de blocos (BIBDR) e Planos em Blocos Incompletos com blocos de diferentes dimensões (VBBD). Exploramos algumas propriedades e métodos de construção destes planos e ilustramos, sempre que possível, com exemplos. Tendo como base o planeamento em blocos, apresentamos uma aplicação dos BIBDR na área da Educação com o objetivo de comparar cinco domínios do pensamento algébrico de uma amostra de alunos do 1º ano do ensino superior em Cabo Verde. Para a análise dos dados da amostra foi utilizado o software R, versão 2.12.1. Pudemos constatar que existem diferenças significativas entre alguns dos domínios do pensamento algébrico, nomeadamente entre os domínios da Generalização da Aritmética e Tecnicismo Algébrico com os restantes domínios. Recomendamos a escolha de uma amostra mais representativa constituída por alunos de todas as instituições superiores de Cabo Verde.

Office of the State Long-Term Care Ombudsman Annual Report 2004, January 2005.

The State Long-Term Care Ombudsman program operates as a unit within the Office of Elder Rights at Iowa Department of Elder Affairs. Duties of all long-term care ombudsmen are mandated by the Older Americans Act. This office serves people living in nursing facilities, residential care facilities, elder group homes and assisted living programs. Iowa’s State Long-Term Care Ombudsman’s Office has gone through many changes this past year ranging from staff changes to increase in jurisdiction area. Jeanne Yordi is now the State Long-Term Care Ombudsman, joining this promotion, will be three additional Long-Term Care Ombudsmen to the unit. With additional staff this office hopes to create more public awareness; however, cases and complaints are top priority as this office may begin to fulfill the mandates of the Older Americans Act.

Planeamento de experiências : modelos e desafios dos planos em blocos incompletos

The main purpose of an Experimental Design resides mainly in the search for relationships between variables and in comparing levels of factors, using statistical treatment of collected data. The use of blocks in Experimental Design is essential because it allows reducing or eliminating the variability introduced by factors that can influence the experience but are not of main interest and/or were not explicitly included during experiments. In this work we present the results of the study and research of Balanced Incomplete Block Designs (BIBD), Balanced Incomplete Block Designs with repeated blocks (BIBDR) and the Incomplete Blocks Designs with blocks with different dimensions (VBBD). We explore some properties and construction methods of such designs and illustrate, when possible, with examples. Based on Block Designs, we present an application of BIBDR in Education, with the aim of comparing five domains of algebraic thinking in a sample of 1st year students of higher education in Cape Verde. For the analysis of sample data, the software R was used, version 2.12.1. We observed that significant differences exist between some of the domains of algebraic thinking, especially among the domains of Generalization of Arithmetic and Algebraic Technicality with the remaining areas. For a more representative sample, we recommend a bigger sample consisting of students from all higher institutions of Cape Verde.

Planeamento de experiências : modelos e desafios dos planos em blocos incompletos

The main purpose of an Experimental Design resides mainly in the search for relationships between variables and in comparing levels of factors, using statistical treatment of collected data. The use of blocks in Experimental Design is essential because it allows reducing or eliminating the variability introduced by factors that can influence the experience but are not of main interest and/or were not explicitly included during experiments. In this work we present the results of the study and research of Balanced Incomplete Block Designs (BIBD), Balanced Incomplete Block Designs with repeated blocks (BIBDR) and the Incomplete Blocks Designs with blocks with different dimensions (VBBD). We explore some properties and construction methods of such designs and illustrate, when possible, with examples. Based on Block Designs, we present an application of BIBDR in Education, with the aim of comparing five domains of algebraic thinking in a sample of 1st year students of higher education in Cape Verde. For the analysis of sample data, the software R was used, version 2.12.1. We observed that significant differences exist between some of the domains of algebraic thinking, especially among the domains of Generalization of Arithmetic and Algebraic Technicality with the remaining areas. For a more representative sample, we recommend a bigger sample consisting of students from all higher institutions of Cape Verde.