Titanate-based paraelectric glass-ceramics for applications in GHz electronics

Das Gebiet der drahtlosen Kommunikationsanwendungen befindet sich in einem permanenten Entwicklungsprozess (Mobilfunkstandards: GSM/UMTS/LTE/5G, glo-bale Navigationssatellitensysteme (GNSS): GPS, GLONASS, Galileo, Beidou) zu immer höheren Datenraten und zunehmender Miniaturisierung, woraus ein hoher Bedarf für neue, optimierte Hochfrequenzmaterialien resultiert. Diese Entwicklung zeigt sich besonders in den letzten Jahren in der zunehmenden Entwicklung und Anzahl von Smartphones, welche verschiedene Technologien mit unterschiedlichen Arbeitsfrequenzen innerhalb eines Geräts kombinieren (data: 1G-4G, GPS, WLAN, Bluetooth). Die für zukünftige Technologien (z.B. 5G) benötigte Performance-steigerung kann durch die Verwendung von auf MIMO basierenden Antennensystemen realisiert werden (multiple-input & multiple-output, gesteuerte Kombination von mehreren Antennen) für welche auf dielectric Loading basierende Technologien als eine der vielversprechendsten Implementierungslösungen angesehen werden. rnDas Ziel dieser Arbeit war die Entwicklung einer geeigneten paraelektrischen Glaskeramik ($varepsilon_{r}$ > 20, $Qf$ > 5000 GHz, |$tau_f$| < 20 ppm/K; im GHz Frequenzbe-reich) im $mathrm{La_{2}O_{3}}$-$mathrm{TiO_{2}}$-$mathrm{SiO_{2}}$-$mathrm{B_{2}O_{3}}$-System für auf dielectric Loading basierende Mobilfunkkommunikationstechnologien als Alternative zu existierenden kommerziell genutzten Sinterkeramiken. Der Fokus lag hierbei auf der Frage, wie die makroskopi-schen dielektrischen Eigenschaften der Glaskeramik mit ihrer Mikrostruktur korreliert bzw. modifiziert werden können. Es konnte gezeigt werden, dass die dielektrischen Materialanforderungen durch das untersuchte System erfüllt werden und dass auf Glaskeramik basierende Dielektrika weitere vorteilhafte nichtelektro-nische Eigenschaften gegenüber gesinterten Keramiken besitzen, womit dielektrische Glaskeramiken durchaus als geeignete Alternative angesehen werden können. rnEin stabiles Grünglas mit minimalen Glasbildneranteil wurde entwickelt und die chemische Zusammensetzung bezüglich Entglasung und Redoxinstabilitäten optimiert. Geeignete Dotierungen für dielektrisch verlustarme $mathrm{TiO_{2}}$-haltige Glaskeramiken wurden identifiziert.rnDer Einfluss der Schmelzbedingungen auf die Keimbildung wurde untersucht und der Keramisierungsprozess auf einen maximalen Anteil der gewünschten Kristallphasen optimiert um optimale dielektrische Eigenschaften zu erhalten. Die mikroskopische Struktur der Glaskeramiken wurde analysiert und ihr Einfluss auf die makroskopischen dielektrischen Eigenschaften bestimmt. Die Hochfrequenzverlustmechanismen wurden untersucht und Antennen-Prototypenserien wurden analysiert um die Eignung von auf Glaskeramik basierenden Dielektrika für die Verwendung in dielectric Loading Anwendungen zu zeigen.

A New Crystalline LiPON Electrolyte: Synthesis, Properties, and Electronic Structure

The new crystalline compound, Li2PO2N, was synthesized using high temperature solid state methods starting with a stoichiometric mixture of Li2O, P2O5, and P3N5. Its crystal structure was determined ab initio from powder X-ray diffraction. The compound crystallizes in the orthorhombic space group Cmc2(1) (# 36) with lattice constants a = 9.0692(4) angstrom, b = 53999(2) angstrom, and c = 4.6856(2) angstrom. The crystal structure of SD-Li2PO2N consists of parallel arrangements of anionic chains formed of corner sharing (PO2N2) tetrahedra. The chains are held together by Li+ cations. The structure of the synthesized material is similar to that predicted by Du and Holzwarth on the basis of first principles calculations (Phys. Rev. B 81,184106 (2010)). The compound is chemically and structurally stable in air up to 600 degrees C and in vacuum up to 1050 degrees C. The Arrhenius activation energy of SD-Li2PO2N in pressed pellet form was determined from electrochemical impedance spectroscopy measurements to be 0.6 eV, comparable to that of the glassy electrolyte LiPON developed at Oak Ridge National Laboratory. The minimum activation energies for Li ion vacancy and interstitial migrations are computed to be 0.4 eV and 0.8 eV, respectively. First principles calculations estimate the band gap of SD-Li2PO2N to be larger than 6 eV. (C) 2013 Elsevier B.V. All rights reserved.

Looking at Chemistry in Hard to See Places: Understanding Energy Conversion at 1400° Celsius

Solid oxide fuel cells (SOFCs) are promising devices for stationary and portable power and heat generation, because they can use complex fuels such as hydro-carbons, CO, and alcohols. Extreme, non-equilibrium conditions and high tem-peratures (≥ 700 ˚C) required for SOFC operation hamper efforts to understand the mechanisms of component degradation in SOFCs. This talk focuses on new insights into SOFC chemistry and the conversion of carbon-containing fuels (both hydrocarbons and oxygenated) into electricity, carbon dioxide and water, gleaned from a combination of techniques including electrochemical impedance spectroscopy, voltammetry, and vibrational Raman scattering.

The importance of growth hormone in the regulation of erythropoiesis, red cell mass, and plasma volume in adults with growth hormone deficiency

Total body water (TBW) is reduced in adult GH deficiency (GHD) largely due to a reduction of extracellular water. It is unknown whether total blood volume (TBV) contributes to the reduced extracellular water in GHD. GH and insulin-like growth factor I (IGF-I) have been demonstrated to stimulate erythropoiesis in vitro, in animal models, and in growing children. Whether GH has a regulatory effect on red cell mass (RCM) in adults is not known. We analyzed body composition by bioelectrical impedance and used standard radionuclide dilution methods to measure RCM and plasma volume (PV) along with measuring full blood count, ferritin, vitamin B12, red cell folate, IGF-I, IGF-binding protein-3, and erythropoietin in 13 adult patients with GHD as part of a 3-month, double blind, placebo-controlled trial of GH (0.036 U/kg.day). TBW and lean body mass significantly increased by 2.5 +/- 0.53 kg (mean +/- SEM; P < 0.004) and 3.4 +/- 0.73 kg (P < 0.004), respectively, and fat mass significantly decreased by 2.4 +/- 0.32 kg (P < 0.001) in the GH-treated group. The baseline RCM of all patients with GHD was lower than the predicted normal values (1635 +/- 108 vs. 1850 +/- 104 mL; P < 0.002). GH significantly increased RCM, PV, and TBV by 183 +/- 43 (P < 0.006), 350 +/- 117 (P < 0.03), and 515 +/- 109 (P < 0.004) mL, respectively. The red cell count increased by 0.36 +/- 0.116 x 10(12)/L (P < 0.03) with a decrease in ferritin levels by 39.1 +/- 4.84 micrograms/L (P < 0.001) after GH treatment. Serum IGF-I and IGF-binding protein-3 concentrations increased by 3.0 +/- 0.43 (P < 0.001) and 1.3 +/- 0.15 (P < 0.001) SD, respectively, but the erythropoietin concentration was unchanged after GH treatment. No significant changes in body composition or blood volume were recorded in the placebo group. Significant positive correlations could be established between changes in TBW and TBV, lean body mass and TBV (r = 0.78; P < 0.04 and r = 0.77; P < 0.04, respectively), and a significant negative correlation existed between changes in fat mass and changes in TBV in the GH-treated group (r = -0.95; P < 0.02). We conclude that 1) erythropoiesis is impaired in GHD; 2) GH stimulates erythropoiesis in adult GHD; and 3) GH increases PV and TBV, which may contribute to the increased exercise performance seen in these patients.

Probing the function of ionotropic and G protein-coupled receptors in surface-confined membranes

This article reports on recent electrical and optical techniques for investigating cellular signaling reactions in artificial and native membranes immobilized on solid supports. The first part describes the formation of planar artificial lipid bilayers on gold electrodes, which reveal giga-ohm electrical resistance and the insertion and characterization of ionotropic receptors therein. These membranes are suited to record a few or even single ion channels by impedance spectroscopy. Such tethered membranes on planar arrays of microelectrodes offer mechanically robust, long-lasting measuring devices to probe the influence of different chemistries on biologically important ionotropic receptors and therefore will have a future impact to probe the function of channel proteins in basic science and in biosensor applications. In a second part, we present complementary approaches to form inside-out native membrane sheets that are immobilized on micrometer-sized beads or across submicrometer-sized holes machined in a planar support. Because the native membrane sheets are plasma membranes detached from live cells, these approaches offer a unique possibility to investigate cellular signaling processes, such as those mediated by ionotropic or G protein-coupled receptors, with original composition of lipids and proteins.

Dilution and redistribution effects of rapid 2-litre infusions of 0.9% (w/v) saline and 5% (w/v) dextrose on haematological parameters and serum biochemistry in normal subjects: a double-blind crossover study

Although hypoalbuminaemia after injury may result from increased vascular permeability, dilution secondary to crystalloid infusions may contribute significantly. In this double-blind crossover study, the effects of bolus infusions of crystalloids on serum albumin, haematocrit, serum and urinary biochemistry and bioelectrical impedance analysis were measured in healthy subjects. Ten male volunteers received 2-litre infusions of 0.9% (w/v) saline or 5% (w/v) dextrose over 1 h; infusions were carried out on separate occasions, in random order. Weight, haemoglobin, serum albumin, serum and urinary biochemistry and bioelectrical impedance were measured pre-infusion and hourly for 6 h. The serum albumin concentration fell in all subjects (20% after saline; 16% after dextrose) by more than could be explained by dilution alone. This fall lasted more than 6 h after saline infusion, but values had returned to baseline 1 h after the end of the dextrose infusion. Changes in haematocrit and haemoglobin were less pronounced (7.5% after saline; 6.5% after dextrose). Whereas all the water from dextrose was excreted by 2 h after completion of the infusion, only one-third of the sodium and water from the saline had been excreted by 6 h, explaining its persistent diluting effect. Impedances rose after dextrose and fell after saline (P<0.001). Subjects voided more urine (means 1663 and 563 ml respectively) of lower osmolality (means 129 and 630 mOsm/kg respectively) and sodium content (means 26 and 95 mmol respectively) after dextrose than after saline (P<0.001). While an excess water load is excreted rapidly, an excess sodium load is excreted very slowly, even in normal subjects, and causes persistent dilution of haematocrit and serum albumin. The greater than expected change in serum albumin concentration when compared with that of haemoglobin suggests that, while dilution is responsible for the latter, redistribution also has a role in the former. Changes in bioelectrical impedance may reflect the electrolyte content rather than the volume of the infusate, and may be unreliable for clinical purposes.

Electrodes for Long-Term Esophageal Electrocardiography

The emerging application of long-term and high-quality ECG recording requires alternative electrodes to improve the signal quality and recording capability of surface skin electrodes. The esophageal ECG has the potential to overcome these limitations but necessitates novel recorder and lead designs. The electrode material is of particular interest, since the material has to ensure conflicting requirements like excellent biopotential recording properties and inertness. To this end, novel electrode materials like PEDOT and silver-PDMS as well as established electrode materials such as stainless steel, platinum, gold, iridium oxide, titanium nitride, and glassy carbon were investigated by long-term electrochemical impedance spectroscopy and model-based signal analysis using the derived in vitro interfacial properties in conjunction with a dedicated ECG amplifier. The results of this novel approach show that titanium nitride and iridium oxide featuring microstructured surfaces did not degrade when exposed to artificial acidic saliva. These materials provide low electrode potential drifts and insignificant signal distortion superior to surface skin electrodes making them compatible with accepted standards for ambulatory ECG. They are superior to the noble and polarizable metals such as platinum, silver, and gold that induced more signal distortions and are superior to esophageal stainless steel electrodes that corrode in artificial saliva. The study provides rigorous criteria for the selection of electrode materials for prolonged ECG recording by combining long-term in vitro electrode material properties with ECG signal quality assessment.

Body composition and all-cause mortality in subjects older than 65 y.

BACKGROUND A low or high body mass index (BMI) has been associated with increased mortality risk in older subjects without taking fat mass index (FMI) and fat-free mass index (FFMI) into account. This information is essential because FMI is modulated through different healthcare strategies than is FFMI. OBJECTIVE We aimed to determine the relation between body composition and mortality in older subjects. DESIGN We included all adults ≥65 y old who were living in Switzerland and had a body-composition measurement by bioelectrical impedance analysis at the Geneva University Hospitals between 1990 and 2011. FMI and FFMI were divided into sex-specific quartiles. Quartile 1 (i.e., the reference category) corresponded to the lowest FMI or FFMI quartile. Mortality data were retrieved from the hospital database, the Geneva death register, and the Swiss National Cohort until December 2012. Comorbidities were assessed by using the Cumulative Illness Rating Scale. RESULTS Of 3181 subjects included, 766 women and 1007 men died at a mean age of 82.8 and 78.5 y, respectively. Sex-specific Cox regression models, which were used to adjust for age, BMI, smoking, ambulatory or hospitalized state, and calendar time, showed that body composition did not predict mortality in women irrespective of whether comorbidities were taken into account. In men, risk of mortality was lower with FFMI in quartiles 3 and 4 [HR: 0.78 (95% CI: 0.62, 0.98) and 0.64 (95% CI: 0.49, 0.85), respectively] but was not affected by FMI. When comorbidities were adjusted for, FFMI in quartile 4 (>19.5 kg/m(2)) still predicted a lower risk of mortality (HR: 0.72; 95% CI: 0.54, 0.96). CONCLUSIONS Low FFMI is a stronger predictor of mortality than is BMI in older men but not older women. FMI had no impact on mortality. These results suggest potential benefits of preventive interventions with the aim of maintaining muscle mass in older men. This trial was registered at clinicaltrials.gov as NCT01472679.

Malnutrition Predicts Clinical Outcome in Patients with Neuroendocrine Neoplasias.

Malnutrition is a common problem in oncologic diseases influencing treatment outcomes, treatment complications, quality of life and survival. The potential role of malnutrition has not yet systematically been studied in neuroendocrine neoplasms (NEN), which due to growing prevalence and additional therapeutic options provide an increasing clinical challenge for diagnosis and management. The aim of this cross-sectional observational study, which included a long-term follow-up, was therefore to define the prevalence of malnutrition in 203 patients with NEN using various methodological approaches and to analyze the short- and long-term outcome of malnourished patients. A detailed subgroup analysis was also performed to define risk factors for poorer outcome. By applying malnutrition screening scores 21-25% of NEN-patients were at risk of or demonstrated manifest malnutrition. This was confirmed by anthropometric measurements, determination of serum surrogate parameters such as albumin and bioelectrical impedance analysis particularly phase angle α. Length of hospital stay (LoS) was significantly longer in malnourished NEN-patients while long-term overall survival was highly significantly reduced. Patients with high-grade (G3) neuroendocrine carcinomas, progressive disease and undergoing chemotherapy were at particular risk for malnutrition associated with a poorer outcome. Multivariate analysis confirmed the important and highly significant role of malnutrition as an independent prognostic factor for NEN besides proliferative capacity (G3-NEC). Malnutrition is therefore an underrecognized problem in NEN-patients, which should systematically be diagnosed by widely available standard methods such Nutritional Risk Screening (NRS) score, serum albumin levels and bioelectrical impedance analysis (BIA) and treated to improve both short- and long-term outcomes.

The association between CD4+ lymphocyte count and measures of body composition in HIV-infected men

Purpose. This project was designed to describe the association between wasting and CD4 cell counts in HIV-infected men in order to better understand the role of wasting in progression of HIV infection.^ Methods. Baseline and prevalence data were collected from a cross-sectional survey of 278 HIV-infected men seen at the Houston Veterans Affairs Medical Center Special Medicine Clinic, from June 1, 1991 to January 1, 1994. A follow-up study was conducted among those at risk, to investigate the incidence of wasting and the association between wasting and low CD4 cell counts. Wasting was described by four methods. Z-scores for age-, sex-, and height-adjusted weight; sex-, and age-adjusted mid-arm muscle circumference (MAMC); and fat-free mass; and the ratio of extra-cellular mass (ECM) to body-cell mass (BCM) $>$ 1.20. FFM, ECM, and BCM were estimated from bioelectrical impedance analysis. MAMC was calculated from triceps skinfold and mid-arm circumference. The relationship between wasting and covariates was examined with logistic regression in the cross-sectional study, and with Poisson regression in the follow-up study. The association between death and wasting was examined with Cox's regression.^ Results. The prevalence of wasting ranged from 5% (weight and ECM:BCM) to almost 14% (MAMC and FFM) among the 278 men examined. The odds of wasting, associated with baseline CD4 cell count $<$200, was significant for each method but weight, and ranged from 4.6 to 12.7. Use of antiviral therapy was significantly protective of MAMC, FFM and ECM:BCM (OR $\approx$ 0.2), whereas the need for antibacterial therapy was a risk (OR 3.1, 95% CI 1.1-8.7). The average incidence of wasting ranged from 4 to 16 per 100 person-years among the approximately 145 men followed for 160 person-years. Low CD4 cell count seemed to increase the risk of wasting, but statistical significance was not reached. The effect of the small sample size on the power to detect a significant association should be considered. Wasting, by MAMC and FFM, was significantly associated with death, after adjusting for baseline serum albumin concentration and CD4 cell count.^ Conclusions. Wasting by MAMC and FFM were strongly associated with baseline CD4 cell counts in both the prevalence and incidence study and strong predictors of death. Of the two methods, MAMC is convenient, has available reference population data, may be the most appropriate for assessing the nutritional status of HIV-infected men. ^

Effect of starch substitution with crude glycerol on growing rabbit and lactating doe performance

The aim of this work was to study the effect of dietary inclusion of 2.5 or 5.0% of glycerol in substitution for starch on performance of lactating does and fattening rabbits. Over four consecutive reproductive cycles, a total of 81 New Zealand ´ Californian rabbit does and 813 young rabbits weaned at 25 (fattening trial 1) or 35 (fattening trial 2) days of age were allocated at random to the experimental treatments. Inclusion of glycerol in the diet up to 5% did not influence total feed consumption of does and suckling rabbits, body weight and bioelectrical impedance of does at parturition or at day 21 of lactation and litter weight at weaning, or reproductive efficiency. Substitution of starch with glycerol did not affect feed intake, weight gain or mortality during fattening. The results of the current study indicate that crude glycerol from the biofuel industry can be used at levels up to 5% in rabbit diets without any detrimental or beneficial effect on performance

Effect of the Synthesis Route on the Microstructure and the Dielectric Behavior of CaCu3Ti4O12 Ceramics

CaCu3Ti4O12 (CCTO) was prepared by a conventional synthesis (CS) and through reaction sintering, in which synthesis and sintering of the material take place in one single step. The microstructure and the dielectric properties of CCTO have been studied by XRD, FE-SEM, EDS, AFM, and impedance spectroscopy to correlate structure, microstructure, and electrical properties. Samples prepared by reactive sintering show very similar dielectric behavior to those prepared by CS. Therefore, it is possible to prepare CCTO by means of a single-step processing method.

Dielectric behaviour of Hf-doped CaCu3Ti4O12 ceramics obtained by conventional synthesis and reactive sintering

CaCu3(Ti4xHfx)O12 ceramics (JC = 0.04, 0.1 and 0.2) were prepared by conventional synthesis (CS) and through reactive sintering (RS), in which synthesis and sintering of the material take place in one single step. The microstructure and the dielectric properties of Hf-doped CCTO (CCTOHf) have been studied by XRD, FE-SEM, AFM, Raman and impedance spectroscopy (IS) in order to correlate the structure, microstructure and the electrical properties. Samples prepared by reactive sintering show slightly higher dielectric constant than those prepared by conventional synthesis in the same way than the pure CCTO. Dielectric constant and dielectric losses decrease slightly increasing Hf content. For CCTOHf ceramics with x> 0.04 for CS and x> 0.1 for RS, a secondary phase HfTi04 appears. As expected, the reactive sintering processing method allows a higher incorporation of Hf in the CCTO lattice than the conventional synthesis one.

Efecto del sistema de alimentación sobre los resultados técnicos, calidad de la canal, de la carne y de la grasa de cerdos ibéricos

La presente tesis doctoral pretende ampliar conocimientos de los sistemas de producción y tecnología asociada del cerdo Ibérico. Los trabajos de campo fueron llevados a cabo en el CIA ‘El Dehesón del Encinar’ (Oropesa, Toledo, España) con cerdos Ibéricos de la estirpe Torbiscal. En los dos primeros experimentos, utilizando dos grupos de cerdos, se estudió el efecto de la restricción de la alimentación en premontanera sobre las características de la canal y sobre la composición de la grasa al sacrificio de los cerdos posteriormente cebados en montanera. Los animales restringidos en premontanera crecieron significativamente menos que los no restringidos durante dicho periodo, y manifestaron un crecimiento compensatorio durante la montanera. Este crecimiento compensatorio no fue suficiente, y los animales restringidos llegaron con pesos significativamente inferiores al sacrificio, aunque esto no supuso diferencias para las características de la canal entre ambos grupos de animales. También al sacrificio, los animales restringidos durante la premontanera tuvieron concentraciones significativamente diferentes de ácidos grasos, sobre todo en la capa interna de la grasa subcutánea y en la fracción de lípidos polares de la grasa intramuscular; asimismo, tuvieron mayores concentraciones de tocoferoles en el músculo Longissimus dorsi. En un tercer experimento, utilizando cuatro grupos de animales, se estudió el efecto del tiempo de estancia de los cerdos en montanera exclusiva sobre las características de la canal y de la grasa al sacrificio. La duración de la montanera afectó significativamente al crecimiento, a los pesos y porcentajes de los productos del despiece y al perfil de ácidos grasos de la grasa subcutánea. Los animales cebados con pienso en confinamiento tuvieron mayor crecimiento, mejor calidad de la canal, y peor calidad de grasa que los otros tres grupos de animales que se acabaron en montanera exclusiva durante 46, 83 y 111 días. En el último experimento se evaluó si la impedancia bioeléctrica es un método adecuado para realizar un estudio tisular de los jamones de cerdos Ibéricos, aspecto especialmente relevante para la industria. La impedancia bioeléctrica resultó ser un método no invasivo adecuado, que puede ser aplicado para predecir la composición tisular de los jamones, aunque se necesitan más ensayos antes de llevar este método a la práctica cotidiana de la industria. ABSTRACT This Thesis aims to expand knowledge on production systems and technology associated to Iberian pigs. Fieldwork was conducted in the CIA ‘El Dehesón del Encinar’ (Oropesa, Toledo, Spain) with Iberian pigs Torbiscal line. In first two experiments, using two groups of pigs, the effect of feed restriction during the period previous to free-range fattening on growth and carcass characteristics in Iberian pigs finished under free-range conditions was studied. The pigs fed low feeding levels during the period previous to free-range finishing period, had significantly lower growth than those feed with a high level during that period, and showed a compensatory growth during free-range period. However, this compensatory growth was not enough to reach the same weight than the animals fed with a high level, and the slaughter weights were significantly different, although no differences were observed for the carcass characteristics between both groups of pigs. At slaughter, animals fed low feeding levels during the period previous to free-range finishing period, had significantly different fatty acid proportions, especially in the inner backfat layer and in polar lipids fraction of the intramuscular fat; also, the tocopherol concentration found in Longissimus dorsi muscle from pigs fed low feeding levels was higher than those fed high feeding levels. In a third experiment, using four groups of animals, the effect of duration under freerange exclusive conditions on carcass and fat characteristics at slaughter was studied. The growth, weights and percentages of carcass cuts, and fatty acid profile of the backfat were significantly affected by the duration under free-range exclusively conditions. The animals fed in confinement with concentrate diets during the whole fattening period had high growth, better carcass quality and worse fat quality than the other three groups of animals fed under free-range exclusive conditions during 46, 83 and 111 days. In the last experiment, it assessed whether the bioelectrical impedance is a suitable method for perform a tissue study of Iberian pig hams, particularly important aspect for industry. The bioelectrical impedance has proved to be a non-invasive suitable method, which can be applied to predict the tissues composition of the hams, but more trials are needed before carrying this method to everyday practice in the industry.

Investigação do mecanismo cinético da reação de redução de oxigênio em solventes não aquosos

O aumento no consumo energético e a crescente preocupação ambiental frente à emissão de gases poluentes criam um apelo mundial favorável para pesquisas de novas tecnologias não poluentes de fontes de energia. Baterias recarregáveis de lítio-ar em solventes não aquosos possuem uma alta densidade de energia teórica (5200 Wh kg-1), o que as tornam promissoras para aplicação em dispositivos estacionários e em veículos elétricos. Entretanto, muitos problemas relacionados ao cátodo necessitam ser contornados para permitir a aplicação desta tecnologia, por exemplo, a baixa reversibilidade das reações, baixa potência e instabilidades dos materiais empregados nos eletrodos e dos solventes eletrolíticos. Assim, neste trabalho um modelo cinético foi empregado para os dados experimentais de espectroscopia de impedância eletroquímica, para a obtenção das constantes cinéticas das etapas elementares do mecanismo da reação de redução de oxigênio (RRO), o que permitiu investigar a influência de parâmetros como o tipo e tamanho de partícula do eletrocatalisador, o papel do solvente utilizado na RRO e compreender melhor as reações ocorridas no cátodo dessa bateria. A investigação inicial se deu com a utilização de sistemas menos complexos como uma folha de platina ou eletrodo de carbono vítreo como eletrodos de trabalho em 1,2-dimetoxietano (DME)/perclorato de lítio (LiClO4). A seguir, sistemas complexos com a presença de nanopartículas de carbono favoreceu o processo de adsorção das moléculas de oxigênio e aumentou ligeiramente (uma ordem de magnitude) a etapa de formação de superóxido de lítio (etapa determinante de reação) quando comparada com os eletrodos de platina e carbono vítreo, atribuída à presença dos grupos laterais mediando à transferência eletrônica para as moléculas de oxigênio. No entanto, foi observada uma rápida passivação da superfície eletrocatalítica através da formação de filmes finos de Li2O2 e Li2CO3 aumentando o sobrepotencial da bateria durante a carga (diferença de potencial entre a carga e descarga > 1 V). Adicionalmente, a incorporação das nanopartículas de platina (Ptnp), ao invés da folha de platina, resultou no aumento da constante cinética da etapa determinante da reação em duas ordens de magnitude, o qual pode ser atribuído a uma mudança das propriedades eletrônicas na banda d metálica em função do tamanho nanométrico das partículas, e estas modificações contribuíram para uma melhor eficiência energética quando comparado ao sistema sem a presença de eletrocatalisador. Entretanto, as Ptnp se mostraram não específicas para a RRO, catalisando as reações de degradação do solvente eletrolítico e diminuindo rapidamente a eficiência energética do dispositivo prático, devido ao acúmulo de material no eletrodo. O emprego de líquido iônico como solvente eletrolítico, ao invés de DME, promoveu uma maior estabilização do intermediário superóxido formado na primeira etapa de transferência eletrônica, devido à interação com os cátions do líquido iônico em solução, o qual resultou em um valor de constante cinética da formação do superóxido de três ordens de magnitude maior que o obtido com o mesmo eletrodo de carbono vítreo em DME, além de diminuir as reações de degradação do solvente. Estes fatores podem contribuir para uma maior potência e ciclabilidade da bateria de lítio-ar operando com líquidos iônicos.