Produção de chapas de partículas com resíduos de madeira Cordia goeldiana

The aim of this research consisted in the use of wastes from tropical wood (Cordia goeldiana) with low density and the polyurethane resin (mono and bicomponent) castor oil based in the manufacture of particleboards, generating subsidies as application in rural and civil construction, as well in the furniture industry. The particleboards were manufactured with 15% of polyurethane resin content (one part of pre-polymer and one part of polyol), compaction pressure of 4MPa, pressing temperature of 90 degrees C and press time of 7 minutes. The physical and mechanical properties investigated were density, moisture content, strength modulus in bending and internal bond, both obtained according to the recommendations of the Brazilian standard ABNT NBR 14810:2002. The mean values obtained for these properties were systematically superior to the Brazilian standard requirement. This point showed that it is possible the use of Cordia goeldiana wastes in the particleboard production. We confirmed the hypothesis of a significant linear relation between density and the internal bond of the panels, allowing the estimation of the internal bond of particleboards.

Preparação e caracterização de membranas de celulose regenerada a partir da celulose extraída de resíduos agroindustriais para aplicação em processos de separação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características morfogênicas e estruturais da Brachiaria brizantha cv. Marandu submetida a diferentes doses de nitrogênio e alturas de resíduos

The objective of this study was to evaluate the rate of leaf appearance, leaf elongation rate, number of green leaves, length of blade and stem of Brachiaria brizantha cv. Marandu under different nitrogen levels and two residue heights. A randomized block design was used in a 4 x 2 factorial scheme, four doses of nitrogen (100, 200, 300 and 400 kg N ha(-1) year(-1)) and two residue heights (5 and 15 cm). There was significant interaction between residue height and nitrogen levels for leaf appearance rate of signal grass, which was influenced negatively and linearly by the residue heights being observed an average reduction of 28.20% from lower to higher residue. There was no interaction between the levels of nitrogen x residue height on the number of green leaves. The dosage that provided the highest stalk in the residue height of 5 cm was of 271.5 kg N ha(-1). An increase of 0.0745 cm tiller(-1) day(-1) for 1 kg of N ha(-1) applied to height of 15 cm of residue was observed. Nitrogen fertilization contributes positively to growth and development of rates of appearance and leaf extension. The management of pasture of Brachiaria brizantha cv. Marandu with 5 cm of residue and fertilization with 100 kg N ha(-1) provided better answer morphogenic traits.

Análise do potencial de micro-organismos dos gêneros Lectthophora e Cryptococcus para a produção de biocumbustíveis

A busca de novas fontes de energia tem sido estimulada pela demanda crescente do mercado e o bioetanol é uma alternativa promissora para esta questão. A produção de etanol a partir de resíduos agroindustriais lignocelulósicos está sendo pesquisada em vários laboratórios do Brasil e do exterior. Os resíduos da agroindústria são formados, em grande parte, por fibra vegetal lignocelulósica, a qual é altamente resistente à degradação, dificultando a conversão dos componentes a monossacarídeos fermentescíveis. Desta forma, a prospecção de micro-organismos que viabilizem a conversão de material lignocelulósico em etanol tem aumentado consideravelmente. Sendo assim, o estudo de micro-organismos associados às formigas cortadeiras, os quais são adaptados ao uso da biomassa lignocelulolítica, pode ser promissor para a descoberta de enzimas adequadas à degradação eficiente da fibra vegetal, podendo significar um passo adiante na produção do etanol de segunda geração. Neste trabalho analisamos a ação hidrolítica e a liberação de açúcares fermentescíveis por fungos dimórficos do gênero Lecythophora e de leveduras do gênero Cryptococcus sobre o material lignocelulósico. A metodologia empregada consistiu na inoculação das linhagens em diferentes resíduos da agroindústria, como bagaço de cana-de-açúcar, casca de café, casca de arroz e sabugo de milho triturado, seguida da quantificação dos açúcares redutores liberados, bem como da produção de enzimas hidrolíticas extracelulares, como endoamilase, exoamilase, pectinase, endoglucanase, exoglucanase e xilanase. O gênero Lecythophora mostrou-se melhor produtor enzimático quando comparado com o gênero Cryptococcus, ambos em meio suplementado com bagaço de cana-de-açúcar. Ainda, foi realizado o inóculo de culturas mistas das melhores linhagens pertencentes ao gênero Lecythophora. A produção enzimática constatada indicou o potencial das linhagens...

Gestão integrada de resíduos sólidos urbanos nos municípios da UGRHI- 14 Alto Paranapanema: interfaces concretas e potencialidades

Pós-graduação em Geografia - FCT

Proposição de modelo de logística reversa de resíduos sólidos domésticos recicláveis para o municípios de Rio Claro - SP

The approval of the Solid Waste National Policy on August 2, 2010, brought important advances on the issue of solid waste nationwide. Several requirements were imposed causing public and private sectors to direct the problem more diligently. At the same time, the growth of human consumption and the negative impacts of related activities are increasing pressure for new ways to manage wastes. This study was carried out in order to bring proposals for a new model of solid waste management in the city of Rio Claro. To do so, it was used methodologies which stick to collaborative approaches in order to co-create a new vision considering different points of view . This new proposal includes four main initiatives: the integration of a reverse logistics system and collection of recycling materials in all kinds of educational institutions; the use of a routing platform for collection of solid wastes and recycling materials; the application of a garbage fee to residents who use the collection of solid waste system; and a bonus system developed by the private sector as a marketing strategy, encouraged by the public sector, enabling residents to separate their wastes correctly and leave them in one of the educational institutions to exchange points for discounts at local markets

Análise dos métodos de leira estática e de revolvimento manual na compostagem de resíduos orgânicos gerados em restaurante universitário

Composting is considered a process that enables adding value to organic solid waste turning them into organic fertilizer. In this process, factors such as mishandling the windrow, failed to control the temperature, aeration and moisture content will result in the quality of waste decomposition, and thus affect the quality of the final compound. Decentralized systems such as home composting, composting in restaurants, food courts and schools are one of the solutions for valuing these waste in a non expensive way and with greater quality. For this purpose, the project aims to analyze the conditions for composting of solid waste of the University Restaurant of Rio Claro- SP, through two different composting systems: manual revolving windrow and static pile. It was found that in University Restaurant (RU) on average 33% by weight of the total waste generated in the property are capable of composting. In this sense, in order to investigate the preliminary process operation parameters were mounted one manual windrow composed of 100% of the UR waste and a static pile composed of 60% of the UR waste and 40% of pruning and grass residues (PG). This study analyzed the manual revolving windrow and static pile systems for the parameters: moisture content, pH, C / N ratio and temperature. The study of the proportions of the PG and UR waste pointed to the need for pruning and grass residues addition for composting, considering that the manual revolving windrow composed by 100% of the UR waste had no satisfactory performance due to low temperatures measured during 60 days analysis. The best ratio for manual revolving windrow method analyzed in this study was 60% of the UR waste and 40% of PG waste, in dry weight. From this proportion a static pile was assembled, composed of 60% of UR waste e 40% of PG waste from the maintenance activities of the green area of the university. The biological activity in the static pile reached the maximum temperature of ...

Diagnóstico do plano de gestão de resíduos sólidos do município de Osasco (SP)

The management of solid waste has been a great challenge to public managers both because of its high operational costs and increasing waste generation. Besides environmental and public health harm, it involves high costs to be mitigated. It is necessary to seek solutions that focus on, amongst other matters, economic efficiency for a healthy environment. This could be reached with sustainable development, which has proven itself as an alternative model of development to the actual one in place. In order to ensure that sustentability is the goal of an activity, it is necessary to establish goals and to evaluate a system in order to track opportunities and correct possible mistakes, that is, it is necessary to elaborate a Waste Management Plan. However, in order to establish goals, it is also necessary a good description of the management of solid waste, thus diagnosis is a core aspect in the building of an specific law, as it will allow for the knowledge of the actual status of solid waste collection in Osasco town, showing what progress has been made in recent years, identifying current problems and generating the foundations to build future perspectives in the area. The present work has seeked to elaborate a diagnosis on waste management in Osasco municipality, presenting places for consultation and analysing how it meets the current legislation in place, enabling it to serve as a model for the elaboration of other diagnosis in other Brazilian municipalities

Análise sobre a importância do gerenciamento de resíduos de construção e demolição na universidade

With the growth of settlements and the consequent rise in civilian buildings, there was a need to allocate appropriately the waste arising from construction and demolition. Failure to meet the standards set about building waste generate social, economic and environmental impacts of remediation difficult. This study aimed to attend the importance of holding management programs involving the waste of construction and demolition at the University by the resulting environmental, economic and social benefits, and analysis of the main stages of Waste Management of Construction and Demolition, whose based on the National Solid Waste Policy, as well as verification of the importance of implementing these steps in the design of works, assisting in future studies of this type of waste and the problems accompanying the University

Produção, caracterização nutricional e utilização de farinhas e óleos de resíduos de peixes neotropicais em dietas para Tilápia do Nilo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Gerenciamento de resíduos odontológicos no serviço público

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Protocolo de biossegurança e gerenciamento de resíduos no ensino de radiologia odontológica da Faculdade de Odontologia de Araçatuba-UNESP

In dentistry, the technic and radiographic processing incur the possibility of cross infection and environmental contamination. The dentist is responsible for the patient and dental team. For this reason he needs to take a protocol to prevent the spread of microorganisms and environmental exposure to risk factors. The protocols are introduced in the dentistry school as an important teaching tool, whose learning and application reinforce the importance of continuity of these actions in the professional activity. The objective of this paper is to present the biosafety and waste management protocol used in the dental radiology clinic of Araçatuba Dental School, including procedures for the prevention of biological and environmental contamination.

Desenvolvimento de um bioprocesso utilizando-se resíduos para produção de amilases por Rhizopus oligosporus e etanol por Saccharomyces cerevisiae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biossorção & biodegradação de azo corante: desenvolvimento de processos utilizando resíduos como fonte de microorganismos = Azo dye biosorption & biodegradation : process development with residues as source of microorganisms

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Recuperação de amidos remanescentes em resíduos de extração da fécula de mandioca

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)