Absorption and emission properties of LBL PPV films deposited on ITO electrodes

In this work we studied the properties of absorption and emission line shape of layer-by-layer (LBL) poly(p-phenylene vinylene) (PPV) on indium-tin oxide (ITO) electrode. To minimize the PPV thermal conversion effects during the polymer processing, we used a less aggressive leaving group in the precursor polymer; minimizing electrode degradation. LBL ITO/PPV films showed the same absorption and emission line shape compared with LBL PPV films deposited on non-metallic substrates (glass). With this analysis we indirectly observe the decrease in the ITO degradation. Atomic force microscopy (AFM) technique was used to analyze quantitatively the microscopic morphology of the film surface. Results indicated that the substrate topology is not affected, to a large extent, by the use of dodecylbenzensulfonate (DBS) ion. (C) 2008 Elsevier B.V. All rights reserved.

Platinum nanoparticle-modified electrodes, morphologic, and electrochemical studies concerning electroactive materials deposition

The present work describes the synthesis of platinum nanoparticles followed by their electrophoretic deposition onto transparent fluorine-doped tin oxide electrodes. The nano-Pt-modified electrodes were characterized by voltammetric studies in acidic solutions showing a great electrocatalytic behavior towards H(+) reduction being very interesting for fuel cell applications. Morphological characterization was performed by atomic force microscopy on different modified electrodes showing a very rough surface which can be tuned by means of time of deposition. Also, nickel hydroxide thin films were galvanostatically grown onto these electrodes showing an interesting electrochemical behavior as sharper peaks, indicating a faster ionic exchange from the electrolyte to the film.

Micro/nanostructured carbon composite modified with a hybrid redox mediator and enzymes as a glucose biosensor

A carbon micro/nanostructured composite based on cup-stacked carbon nanotubes (CSCNTs) grown onto a carbon felt has been found to be an efficient matrix for enzyme immobilization and chemical signal transduction. The obtained CSCNT/felt was modified with a copper hexacyanoferrate/polypyrrole (CuHCNFe/Ppy) hybrid mediator, and the resulting composite electrode was applied to H(2)O(2) detection, achieving a sensitivity of 194 +/- 15 mu A mmol(-1) L. The results showed that the CSCNT/felt matrix significantly increased the sensitivity of CuHCNFe/Ppy-based sensors compared to those prepared on a felt unrecovered by CSCNTs. Our data revealed that the improved sensitivity of the as-prepared CuHCNFe/Ppy-CSCNT/felt composite electrode can be attributed to the electronic interactions taking place among the CuHCNFe nanocrystals, Ppy layer and CSCNTs. In addition, the presence of CSCNTs also seemed to favor the dispersion of CuHCNFe nanocrystals over the Ppy matrix, even though the CSCNTs were buried under the conducting polymer layer. The CSCNT/felt matrix also enabled the preparation of a glucose biosensor whose sensitivity could be tuned as a function of the number of glucose oxidase (GOx) layers deposited through a Layer-by-Layer technique with an sensitivity of 11 +/- 2 mu A mmol(-1) L achieved at 15 poly(diallyldimethylammoniumchloride)/GOx bilayers. (C) 2011 Elsevier Ltd. All rights reserved.

Lithium Ion Electro-Insertion and Spectroelectrochemical Properties of Films from Hexaniobate

Layer-by-layer (LbL) films from K(2)Nb(6)O(17)(2-) and polyallylamine (PAH) and dip-coating films of H(2)K(2)Nb(6)O(17) were prepared on a fluorine-doped tin-oxide (FTO)-coated glass. The atomic force microscopy (AFM) images were carried out for morphological characterization of both materials. The real surface area and the roughness factor were determined on the basis of pseudocapacitive processes involved in the electroreduction/electrooxidation of gold layers deposited on these films. Next, lithium ion insertion into these materials was examined by means of electrochemical and spectroelectrochemical measurements. More specifically, cyclic voltammetry and current pulses under visible light beams were used to investigate mass transport and chromogenic properties. The lithium ion diffusion coefficient (D(Li)) within the LbL matrix is significantly higher than that within the dip-coating film, ensuring high storage capacity of lithium ions in the self-assembled electrode. Contrary to the LbL film, the potentiodynamic profile of absorbance change (Delta A) as a function of time is not similar to that obtained in the case of current density for the dip-coating film. Aiming at analyzing the rate of the coloration front associated with lithium ion diffusion, a spectroelectrochemical method based on the galvanostatic intermittent titration technique (GITT) was employed so as to determine the ""optical"" diffusion coefficient (D(op)). In the dip-coating film, the method employed here revealed that the lithium ion rate is higher in diffusion pathways formed from K(2)Nb(6)O(17)(2-) sites that contribute more significantly to Delta A. Meanwhile, the presence of PAH contributed to the increased ionic mobility in diffusion pathways in the LbL film, with low contribution to the electrochromic efficiency. These results aided a better understanding of the potentiodynamic profile of the temporal change of absorbance and current density during the insertion/deinsertion of lithium ions into the electrochromic materials.

Development of Highly Selective Enzymatic Devices Based on Deposition of Permselective Membranes on Aligned Nanowires

We describe a simple and efficient strategy to fabricate enzymatic devices based on the deposition of glucose oxidase on aligned and highly oriented CoNiMo metallic nanowires. CoNiMo nanowires with an average diameter of 200 nm and length of 50 mu m were electrodeposited on Au-covered alumina substrates via electrodeposition, using alumina membranes as templates. Enzyme-modified electrodes were fabricated via enzyme immobilization using a cross-linker. To minimize nonspecific reactions in the presence of interfering agents, a permselective membrane composed of poly(vinylsulfonic acid) and polyamidoamine dendrimer was deposited via electrostatic interaction. The formation of hydrogen peroxide as a product of the enzymatic reaction was monitored at low overpotential, 0.0 V (vs Ag/AgCl). The detection limit was estimated at 22 mu M under an applied potential of 0.0 V. The apparent Michaelis-Menten constant determined from the Lineweaver-Burke plot was 2 mM.

Synthesis and characterization of stable Co and Cd doped nickel hydroxide nanoparticles for electrochemical applications

The present paper describes the physical-chemical characterization and electrochemical behavior of a new nanomaterial formed by the addition of cadmium and cobalt atoms into the structure of nickel hydroxide nanoparticles, these ones synthesized by an easy sonochemical method. Particles of about 5 nm diameter were obtained and characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction and Raman spectroscopy. Different nickel hydroxide nanoparticles were immobilized onto transparent conducting substrates by using electrostatic layer-by-layer providing thin films at the nanoscale and the electrochemical behavior was investigated. The formation of a mixed hydroxide was corroborated by observation of very interesting properties as redox potential shifting to less positive potentials and high stability when submitted to long electrochemical cycling or high times of ultrasonic synthesis, suggesting practical applications. (C) 2008 Elsevier B.V. All rights reserved.

Copper hexacyanoferrate nanoparticles modified electrodes: A versatile tool for biosensors

Copper hexacyanoferrate nanoparticles of about 30 nm in size have been prepared by the sonochemical irradiation of a mixture of aqueous potassium ferricyanide and copper chloride solutions. The nanoparticles were immobilized onto fluorine doped tin oxide (FTO) electrodes by using the electrostatic deposition layer-by-layer technique (LbL), obtaining electroactive films with electrocatalytic properties towards H2O2 reduction, providing higher currents than those observed for electrodeposited bulk material, even in electrolytes containing NH4+, Na+ and K+. The nanoparticles assembly was used as mediator in a glucose biosensor by immobilizing glucose oxidase enzyme by both, cross-linking and LbL. techniques. Sensitivities obtained were dependent on the immobilization method ranging from 1.23 mu A mmol(-1) L cm(-2) for crosslinking to 0.47 mu A mmol(-1) L cm(-2) for LbL; these values being of the same order than those obtained with electrodes where the amount of enzyme used is much higher. Moreover, the linear concentration range where the biosensors can operate was 10 times higher for electrodes prepared with the LbL immobilization method than with the conventional crosslinking one. (C) 2008 Elsevier B.V. All rights reserved.

Defining the role of common variation in the genomic and biological architecture of adult human height

Using genome-wide data from 253,288 individuals, we identified 697 variants at genome-wide significance that together explained one-fifth of the heritability for adult height. By testing different numbers of variants in independent studies, we show that the most strongly associated ∼2,000, ∼3,700 and ∼9,500 SNPs explained ∼21%, ∼24% and ∼29% of phenotypic variance. Furthermore, all common variants together captured 60% of heritability. The 697 variants clustered in 423 loci were enriched for genes, pathways and tissue types known to be involved in growth and together implicated genes and pathways not highlighted in earlier efforts, such as signaling by fibroblast growth factors, WNT/β-catenin and chondroitin sulfate-related genes. We identified several genes and pathways not previously connected with human skeletal growth, including mTOR, osteoglycin and binding of hyaluronic acid. Our results indicate a genetic architecture for human height that is characterized by a very large but finite number (thousands) of causal variants.2014

A modest start, but a steady rise in research use : A longitudinal study of nurses during the first five years in professional life

Background: Newly graduated nurses are faced with a challenging work environment that may impede theirability to provide evidence-based practice. However, little is known about the trajectory of registered nurses’ use ofresearch during the first years of professional life. Thus, the aim of the current study was to prospectively examinethe extent of nurses’ use of research during the first five years after undergraduate education and specifically assesschanges over time.Method: Survey data from a prospective cohort of 1,501 Swedish newly graduated nurses within the nationalLANE study (Longitudinal Analyses of Nursing Education and Entry in Worklife) were used to investigate perceiveduse of research over the first five years as a nurse. The dependent variables consisted of three single itemsassessing instrumental, conceptual, and persuasive research use, where the nurses rated their use on a five-pointscale, from ‘never’ (1) to ‘on almost every shift’ (5). These data were collected annually and analyzed bothdescriptively and by longitudinal growth curve analysis.Results: Instrumental use of research was most frequently reported, closely followed by conceptual use, withpersuasive use occurring to a considerably lower extent. The development over time showed a substantial generalupward trend, which was most apparent for conceptual use, increasing from a mean of 2.6 at year one to 3.6 atyear five (unstandardized slope +0.25). However, the descriptive findings indicated that the increase started onlyafter the second year. Instrumental use had a year one mean of 2.8 and a year five mean of 3.5 (unstandardizedslope +0.19), and persuasive use showed a year one mean of 1.7 and a year five mean of 2.0 (unstandardized slope+0.09).Conclusion: There was a clear trend of increasing research use by nurses during their first five years of practice.The level of the initial ratings also indicated the level of research use in subsequent years. However, it took morethan two years of professional development before this increase ‘kicked in.’ These findings support previousresearch claiming that newly graduated nurses go through a ‘transition shock,’ reducing their ability to useresearch findings in clinical work.

O processo decisório do empreendedor frente à transição da pequena para a média empresa: casos do setor hoteleiro na cidade Curitiba-PR

O presente estudo buscou entender como as mudanças ocasionadas pelo crescimento da empresa afetam o processo decisório, com foco na transição de pequena para média empresa. Buscou-se preencher o gap existente sobre esse período de transição entre pequenas e médias empresas, principalmente sob os aspectos abordados pelas lógicas Effectuation e Causation, descritas por Sarasvathy (2001). Esta pesquisa parte do princípio de que as pequenas empresas possuem poucos níveis hierárquicos e geralmente as decisões estão centralizadas no empreendedor-proprietário. Já quando a empresa cresce e torna-se média empresa, há um aumento nas formalizações dos processos e nas hierarquias. Com isso, há uma necessidade de modificar o processo decisório, que pode ser descentralizada ou envolver mais pessoas, se comparado às pequenas empresas. O referencial teórico da pesquisa, teve como base temas relativos à pequenas e médias empresas; setor hoteleiro, estrutura organizacional; ciclo de vida das organizações; processo decisório; e, por fim, o uso das lógicas causation e effectuation, com foco nas características do processo decisório do empreendedor. A pesquisa teve de caráter qualitativo e exploratório e faz uso do método de estudos de casos, através de entrevistas em profundidade com empreendedores do setor hoteleiro, que é um setor de serviços que tem tido grande visibilidade e crescimento nos últimos anos. Foram analisados dois casos no setor hoteleiro de Curitiba- PR, que passaram recentemente pela fase de transição de pequena para média empresa. Em cada um dos casos foram entrevistados os proprietários-fundadores, os seus sucessores diretos e o gerente-geral. Também levantou-se depoimentos de clientes em sites de avalizações de hospedagem. Para análise dos dados foram atribuídas categorias analíticas, e foi realizada a análise do conteúdo, (contrapondo com o referencial teórico apresentado) e cross-case analysis (comparativo das informações obtidas em cada caso). Ao finalizar a pesquisa, concluiu-se que a transição de pequena para média empresa afeta as decisões no sentido de aumentar a formalização de processos, há uma delegação de pequenos poderes, um maior distanciamento dos funcionários e a cúpula administrativa, há uma preocupação maior com a capacitação dos funcionários, são consideração de aspectos racionais na decisão, há uma equipe de suporte para tomada de decisões, há uma preocupação com o longo prazo, as responsabilidades tornam-se mais claras, e mais autonomia é delegada aos funcionários. Pode-se dizer que não mudou o fato da administração permanecer familiar, o foco das decisões ainda mantém-se no curto prazo, as decisões permanecem flexíveis, mantém-se a centralização do poder de decisões estratégicas; há ainda uma dificuldade em separar o pessoal do profissional, definição de metas e objetivos não muito claras, investimentos em um projeto por vez, e o uso de rede de contatos ainda é importante para o desenvolvimento da empresa.

Sustainable miracles : protection and competition in the Brazilian oil industry

It is often suggested that competition improves productivity, however, the underlying support for this idea is surprisingly thin. This paper presents a case study examining the e ects of a change in the competitive environment on productivity at the Petrobras, Brazil's state-owned oil company. Petrobras had a legal monopoly on production, re ning, transportation and importation of oil in Brazil until it was removed in 1995. Even though Petrobras continues to have a de facto monopoly, the end of legal monopoly labor productivity growth rate more than doubled. A growth accounting of the industry shows that between 1977 and 1993 output growth rate (and productivity growth rate) is explained by the accumulation of capital, while Total Factor Productivity (TFP) decreased. Between 1994 and 2000 labor productivity growth rate is completely explained by the growth rate of TFP. The results suggest that the threat of competition alone is su cient to improve productivity. They also provide evidence that restricting competition help cause Brazil's depression of the 1980s.

Encapsulation of single hMSCs in polyelectrolyte shells

The main objective of this Thesis was to encapsulate single viable cells within polyelectrolyte films using the Layer-by-Layer (LbL) technique. Most of the experiments used human mesenchymal stem cells (MSCs) whose characteristics (capacity of selfrenewal and potential to differentiate into several types of cells) make them particularly interesting to be used in biomedical applications. Also, most of the experiments used alginate (ALG) as the anionic polyelectrolyte and chitosan (CHI) or poly(allylamine hydrochloride) (PAH) as the cationic polyelectrolyte. Hyaluronic acid (HA) was also tested as an anionic polyelectrolyte. At the beginning of the work, the experimental conditions necessary to obtain the encapsulation of individual cells were studied and established. Through fluorescence microscopy visualization by staining the cell nucleus and using polyelectrolytes conjugated to fluorescent dyes, it was possible to prove the obtainment of capsules containing one single cell inside. Capsules aggregation was an observed problem which, despite the efforts to design an experimental process to avoid this situation (namely, by playing with cell concentration and different means of re-suspending and stirring the cells), was not completely overcome. In a second part of the project, single cells were encapsulated within polyelectrolyte layers made of CHI/ALG, PAH/ALG and PAH/HA and their viability was evaluated through the resazurin reduction assay and the Live/Dead assay. In these experiments, during the LbL process, polyelectrolyte solutions were used at a concentration of 1mg/mL based on literature. In general, the viability of the encapsulated cells was shown to be very low/absent. Then, as a consequence of the lack of viability of cells encapsulated within polyelectrolyte layers, the LbL technique was applied in cells growing adherent to the surface of cell culture plates. The cells were cultured like in a sandwich, between the surface of the cell culture dish and the polyelectrolyte layers. Also here, the polyelectrolyte solutions were used at a concentration of 1mg/mL during the LbL process. Surprisingly, cell viability was also absent in these systems. A systematic study (dose-effect study) was performed to evaluate the effect of the concentration of the individual polyelectrolytes (ALG, CHI and PAH were studied) in cell viability. Experiments were performed using cells growing adherent to the surface of cell culture plates. The results pointed out that a very high (cytotoxic) concentration of polyelectrolytes had been in use. Also, in general, PAH was much more cytotoxic than CHI, whereas ALG was the less cytotoxic polyelectrolyte. Finally, using alginate and chitosan solutions with adequate concentrations (low concentrations: 50ng/mL and 1μg/mL), the encapsulation of single viable cells was again attempted. Once again, the encapsulated cells were not shown to be viable. In conclusion, the viability of the encapsulated cells is not only dependent on the cytotoxic characteristics (or combined cytotoxic characteristics) of the polyelectrolytes but it seems that, when detached from the culture plates, the cells become too fragile and lose their viability very easily.

Crescimento e nutrição mineral de capim-camalote

Rottboelia exaltata é considerada uma das 12 piores espécies daninhas que infestam a cultura da cana-de-açúcar, pois geralmente não permite o fechamento das entrelinhas da cana quando se encontra em densidades maiores que 10 plantas por m². Com o objetivo de estudar a produção de massa seca, a distribuição e o acúmulo de macronutrientes em plantas de capim-camalote, foi conduzido o presente trabalho em condições de casa de vegetação. As plantas foram cultivadas em vasos preenchidos com areia de rio lavada e peneirada, sendo irrigadas diariamente com solução nutritiva completa de Hoagland & Arnon a 50% da concentração original. A primeira avaliação foi realizada aos 21 dias após a emergência (DAE), e as seguintes, em intervalos de 14 dias. Foi determinada a biomassa seca das diferentes partes da planta. O material foi moído e analisado quanto aos teores de macronutrientes. Os resultados indicaram que a planta apresentou crescimento durante toda a fase experimental. O maior acúmulo ocorreu aos 133 DAE, quando a planta acumulou 87,18 gramas de massa seca. Aos 133 DAE, cerca de 34,60% da biomassa seca estava alocada nas raízes, 40,29% nos colmos + bainhas, 15,13% nas folhas e 8,35% nas inflorescências. O acúmulo total dos macronutrientes foi crescente ao longo do ciclo de desenvolvimento da planta. Até 77 DAE, uma planta de capim-camalote acumula 7,14 gramas de massa seca; 132,2 mg de K; 81,5 mg de N; 32,3 mg de Ca; 18,8 mg de P; 18,6 mg de Mg; e 10,1 mg de S.

In vitro Survival of Follicles Collected from Domestic Cats' Ovaries at Different Stages of Oestrous Cycle and Cultured with IGF-1

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Selection of surfactant compounds to enhance the dispersion of Beauveria bassiana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)