Estudio gráfico básico de lago artificial situado en Argulls. Estación de esquí de Baqueira-Beret. Vall d’Aran.

Propuesta gráfica de nuevo lago artificial en Argulls. Estación de esquí de Baqueria-Beret

Carotenoids production: microorganisms as source of natural dyes

Carotenoids are natural dyes synthesized by plants, algae and microorganisms. Application in many sectors can be found, as food dyeing and supplementation, pharmaceuticals, cosmetics and animal feed. Recent investigations have shown their ability to reduce the risks for many degenerative diseases like cancer, heart diseases, cataract and macular degeneration. An advantage of microbial carotenoids is the fact that the cultivation in controlled conditions is not dependent of climate, season or soil composition. In this review the advances in bio-production of carotenoids are presented, discussing the main factors that influence the microbial production of these dyes in different systems.

Fluxos de nutrientes associados às descargas de água subterrânea para a Lagoa Mangueira (Rio Grande do Sul, Brasil)

This study assesses the importance of groundwater discharge to dissolved nutrient levels in Mangueira Lagoon. A transect of an irrigation canal in the margin of Lagoon demonstrated a strong geochemical gradient due to high groundwater inputs in this area. Using 222Rn as a quantitative groundwater tracer, we observed that the flux of dissolved inorganic nitrogen (DIN), silicate and phosphate (1178 and 1977; 26190 and 35652; 167 and 188 mol d-1 for winter and summer, respectively) can continually supply/sustain primary production. The irrigation canals act as an artificial underground tributary and represent a new source of nutrients to coastal lagoons.

Aplicação de técnicas multivariadas e inteligência artificial na análise de espectros de infravermelho para determinação de matéria orgânica em amostras de solos

In this paper studies based on Multilayer Perception Artificial Neural Network and Least Square Support Vector Machine (LS-SVM) techniques are applied to determine of the concentration of Soil Organic Matter (SOM). Performances of the techniques are compared. SOM concentrations and spectral data from Mid-Infrared are used as input parameters for both techniques. Multivariate regressions were performed for a set of 1117 spectra of soil samples, with concentrations ranging from 2 to 400 g kg-1. The LS-SVM resulted in a Root Mean Square Error of Prediction of 3.26 g kg-1 that is comparable to the deviation of the Walkley-Black method (2.80 g kg-1).

Chemical composition, circadian rhythm and antibacterial activity of essential oils of piper divaricatum: a new source of safrole

The essential oils from leaves, stems and fruits of Piper divaricatum were analyzed by GC-MS. The tissues showed high safrole content: leaves (98%), fruits (87%) and stems (83%), with yields of 2.0, 4.8 and 1.7%, respectively. This is a new alternative source of safrole, a compound widely used as a flavoring agent and insecticide. The leaf's oil showed antibacterial activity against gram-negative bacteria while safrole was active against Salmonella Typhimurium and Pseudomonas aeruginosa. In addition, the study of circadian rhythm of the safrole concentration in the essential oils of leaves showed a negligible variation of 92 to 98%.

Tropical biodiversity: has it been a potential source of secondary metabolites useful for medicinal chemistry?

The use of natural products has definitely been the most successful strategy in the discovery of novel medicines. Secondary metabolites from terrestrial and marine organisms have found considerable use in the treatment of numerous diseases and have been considered lead molecules both in their natural form and as templates for medicinal chemistry. This paper seeks to show the great value of secondary metabolites and emphasize the rich chemical diversity of Brazilian biodiversity. This natural chemical library remains understudied, but can be a useful source of new secondary metabolites with potential application as templates for drug discovery.

QSAR modeling: um novo pacote computacional open source para gerar e validar modelos QSAR

QSAR modeling is a novel computer program developed to generate and validate QSAR or QSPR (quantitative structure- activity or property relationships) models. With QSAR modeling, users can build partial least squares (PLS) regression models, perform variable selection with the ordered predictors selection (OPS) algorithm, and validate models by using y-randomization and leave-N-out cross validation. An additional new feature is outlier detection carried out by simultaneous comparison of sample leverage with the respective Studentized residuals. The program was developed using Java version 6, and runs on any operating system that supports Java Runtime Environment version 6. The use of the program is illustrated. This program is available for download at lqta.iqm.unicamp.br.

Time-series forecasting of pollutant concentration levels using particle swarm optimization and artificial neural networks

This study evaluates the application of an intelligent hybrid system for time-series forecasting of atmospheric pollutant concentration levels. The proposed method consists of an artificial neural network combined with a particle swarm optimization algorithm. The method not only searches relevant time lags for the correct characterization of the time series, but also determines the best neural network architecture. An experimental analysis is performed using four real time series and the results are shown in terms of six performance measures. The experimental results demonstrate that the proposed methodology achieves a fair prediction of the presented pollutant time series by using compact networks.

Volatile constituents of Aristolochia trilobata L. (Aristolochiaceae): a rich source of sulcatyl acetate

Analysis of the volatile fraction of Aristolochia trilobata stem led to the identification of 6-methyl-5-hepten-2-yl acetate (23.31 ± 0.28%), limonene (15.43 ± 0.030%), linalool (8.70 ± 0.29%), p-cymene (7.81 ± 0.12%), bicyclogermacrene (4.21 ± 0.11%), and spathulenol (4.17 ± 0.14%) as the major constituents of the essential oil. Linalool (29.51 ± 0.49%), 6-methyl-5-hepten-2-ol (19.54 ± 0.82%), 6-methyl-5-hepten-2-yl acetate (8.92 ± 0.16%), and a-terpineol (4.62 ± 0.05%) were identified as major constituents of the hydrolate. The compound 6-methyl-5-hepten-2-yl acetate was isolated for the first time from this plant and was identified as the major component of the volatile fraction.

Simple method for mass production of polypyrrole/carbon nanotubes hybrid artificial muscle

Large scale preparation of hybrid electrical actuators represents an important step for the production of low cost devices. Interfacial polymerization of polypyrrole in the presence of multi-walled carbon nanotubes represents a simple technique in which strong interaction between components is established, providing composite materials with potential applications as actuators due to the synergistic interaction between the individual components, i.e., fast response of carbon nanotubes, high strain of polypyrrole, and diversity in the available geometry of resulting samples.

PYROLIGNEOUS LIQUOR PRODUCED FROM ACACIA MEARNSII DE WILD WOOD UNDER CONTROLLED CONDITIONS AS A RENEWABLE SOURCE OF CHEMICALS

Acacia mearnsii de Wild (black wattle) is one of the most important trees planted in Southern Brazil for tannin extraction and charcoal production. The pyrolysis of the black wattle wood used for obtaining charcoal is performed in brick ovens, with the gas fraction being sent directly into the environment. The present study examines the condensable compounds present in the liquor produced from black wattle wood at different thermal degradation conditions, using gas chromatography coupled with mass spectrometry (GC/MS). Branches of black wattle were thermally degraded at controlled ambient and temperature conditions. Overall, a higher variety of compounds were obtained under atmospheric air pressure than under synthetic air pressure. Most of the tentatively identified compounds, such as carboxylic acids, phenols, aldehydes, and low molecular mass lignin fragments, such as guayacol, syringol, and eugenol, were products of lignin thermoconversion. Substituted aromatic compounds, such as vanillin, ethyl vanillin, and 2-methoxy-4-propeny-phenol, were also identified. At temperatures above 200 ºC, furan, 2-acetylfuran, methyl-2-furoate, and furfural, amongst others, were identified as polysaccharide derivatives from cellulose and hemicellulose depolymerization. This study evidences the need for adequate management of the condensable by-products of charcoal production, both for economic reasons and for controlling their potential environmental impact.

LOW COST ANALYZER FOR THE DETERMINATION OF PHOSPHORUS BASED ON OPEN-SOURCE HARDWARE AND PULSED FLOWS

The need for automated analyzers for industrial and environmental samples has triggered the research for new and cost-effective strategies of automation and control of analytical systems. The widespread availability of open-source hardware together with novel analytical methods based on pulsed flows have opened the possibility of implementing standalone automated analytical systems at low cost. Among the areas that can benefit from this approach are the analysis of industrial products and effluents and environmental analysis. In this work, a multi-pumping flow system is proposed for the determination of phosphorus in effluents and polluted water samples. The system employs photometric detection based on the formation of molybdovanadophosphoric acid, and the fluidic circuit is built using three solenoid micropumps. The detection is implemented with a low cost LED-photodiode photometric detection system and the whole system is controlled by an open-source Arduino Uno microcontroller board. The optimization of the timing to ensure the color development and the pumping cycle is discussed for the proposed implementation. Experimental results to evaluate the system behavior are presented verifying a linear relationship between the relative absorbance and the phosphorus concentrations for levels as high as 50 mg L-1.

Inoculação artificial de colmos de milho em diferentes idades e concentrações de inóculo e sua relação com a expressão da resistência a fusarium moniliforme

A podridão do colmo de milho (Zea mays) causada por Fusarium moniliforme tem ocorrência generalizada nas regiões produtoras do Brasil. Visando obter informações sobre o comportamento da doença, foram conduzidos dois experimentos em campo, um inoculando-se artificialmente colmo de plantas aos 30, 55 e 80 dias após a semeadura, e outro testando-se diferentes concentrações de inóculo, 1x10(4), 5x10(5) e 1x10(7) conídios/ml, aplicadas aos 55 dias após a semeadura. Nesses experimentos utilizou-se o delineamento de blocos ao acaso, com respectivamente, quatro e cinco repetições, sendo cada parcela constituída de 50 plantas. As inoculações foram feitas no centro do segundo entrenó alongado acima do solo. A avaliação da doença foi realizada aos 120 dias após a semeadura, com base na sintomatologia interna do colmo, utilizando uma escala de notas variando de 1 a 9. Por ocasião da colheita foram avaliados o número de plantas acamadas e a produção de grãos. Procedeu-se também a análise do teor de lignina e tanino da casca e da parte interna do entrenó inoculado nos diferentes tratamentos. Todas as concentrações de inóculo testadas permitiram diferenciar os níveis de resistência dos híbridos, sendo estes decrescentes a partir do Cargill 333 para o Cargill 901, tendo o Dina 766 um comportamento intermediário. Por outro lado, não houve diferenças significativas para as inoculações em diferentes épocas. Os teores de taninos não foram significativamente diferentes entre os híbridos, já o teor de lignina foi significativamente relacionado com o nível de resistência dos três híbridos avaliados.

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.

Source and Target Text-Orientation in Drama Translation. An Analysis of Four Translations of William Shakespeare’s Julius Caesar

Tässä pro gradu -tutkielmassa käsittelen lähde- ja kohdetekstikeskeisyyttä näytelmäkääntämisessä. Tutkimuskohteina olivat käännösten sanasto, syntaksi, näyttämötekniikka, kielikuvat, sanaleikit, runomitta ja tyyli. Tutkimuksen tarkoituksena oli selvittää, näkyykö teoreettinen painopisteen siirtyminen lähdetekstikeskeisyydestä kohdetekstikeskeisyyteen suomenkielisessä näytelmäkääntämisessä. Oletuksena oli, että siirtyminen näkyy käytetyissä käännösstrategioissa. Tutkimuksen teoriaosuudessa käsitellään ensin lähde- ja kohdetekstikeskeisiä käännösteorioita. Ensin esitellään kaksi lähdetekstikeskeistä teoriaa, jotka ovat Catfordin (1965) muodollinen vastaavuus ja Nidan (1964) dynaaminen ekvivalenssi. Kohdetekstikeskeisistä teorioista käsitellään Touryn (1980) ja Newmarkin (1981) teoreettisia näkemyksiä sekä Reiss ja Vermeerin (1986) esittelemää skopos-teoriaa. Vieraannuttamisen ja kotouttamisen periaatteet esitellään lyhyesti. Teoriaosuudessa käsitellään myös näytelmäkääntämistä, William Shakespearen kieltä ja siihen liittyviä käännösongelmia. Lisäksi esittelen lyhyesti Shakespearen kääntämistä Suomessa ja Julius Caesarin neljä kääntäjää. Tutkimuksen materiaalina oli neljä Shakespearen Julius Caesar –näytelmän suomennosta, joista Paavo Cajanderin käännös on julkaistu vuonna 1883, Eeva-Liisa Mannerin vuonna 1983, Lauri Siparin vuonna 2006 ja Jarkko Laineen vuonna 2007. Analyysissa käännöksiä verrattiin lähdetekstiin ja toisiinsa ja vertailtiin kääntäjien tekemiä käännösratkaisuja. Tulokset olivat oletuksen mukaisia. Lähdetekstikeskeisiä käännösstrategioita oli käytetty uusissa käännöksissä vähemmän kuin vanhemmissa. Kohdetekstikeskeiset strategiat erosivat huomattavasti toisistaan ja uusinta käännöstä voi sanoa adaptaatioksi. Jatkotutkimuksissa tulisi materiaali laajentaa koskemaan muitakin Shakespearen näytelmien suomennoksia. Eri aikakausien käännöksiä tulisi verrata keskenään ja toisiinsa, jotta voitaisiin luotettavasti kuvata muutosta lähde- ja kohdetekstikeskeisten käännösstrategioiden käytössä ja eri aikakausien tyypillisten strategioiden kartoittamiseksi.