Adaptação do índice de alimentação saudável ao guia alimentar da população brasileira

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Goniometric measurements of the forelimb and hindlimb joints in sheep

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A clinical comparison of remifentanil or alfentanil in propofol-anesthetized cats undergoing ovariohysterectomy

Sixteen cats were used to compare the cardiovascular and anesthetic effects of remifentanil (REMT) or alfentanil (ALF) in propofol-anesthetized cats undergoing ovariohysterectomy. After premedication with acepromazine, anesthesia was induced and maintained with a constant rate infusion of propofol (0.3 mg/kg/min). REMT or ALF infusions were administered simultaneously with propofol. Heart rate (HR), systolic arterial pressure (SAP), pulse oximetry (SpO(2)), rectal temperature (RT), and response to surgical stimulation were recorded at predefined time points during anesthesia. Data [mean +/- standard deviation (SD)] were analyzed by analysis of variance (ANOVA) for repeated measures followed by a Dunnett's test and Student t-test (P < 0.05). SAP was significantly lower in ALF group than in REMI group. Extubation time was significantly shorter in REMI than in ALF group. Overall infusion rate of REMI and ALF was 0.24 +/- 0.05 mu g/kg/min and 0.97 +/- 0.22 mu g/kg/min, respectively. The combination of propofol and REM! or ALF provided satisfactory anesthesia in cats undergoing ovariohysterectomy. (C) 2011 ISFM and AAFP. Published by Elsevier Ltd. All rights reserved.

Population parameters in Brazilian Thoroughbred

The information in this study has been provided by the Brazilian Association of Racehorse Breeders [Associação do Brasileira dos Criadores do Cavalo de Corrida (ABCCC)]. It can be found in the files on the CD-ROM developed by the ABCCC in 1999. A total of 5008 finishing time records related to 2545 winning horses that ran in the classical calendar on Brazilian hippodromes during 25 years (197498) were analysed. There were a total of 9949 horses on the relationship matrix. The variance components were estimated using the multiple-trait derivate-free restricted maximum likelihood (MTDFREML) program, for an animal model. Generation intervals were higher in the maternal side (10.91 years) than in the paternal one (10.41 years). The estimates for genetic permanent environmental and phenotypic variances and heritability were 0.291, 0.161, 3.486 and 0.08, respectively. The phenotypic standard deviation for time in races was 1.86729 s. Genetic time trend on Thoroughbred races in Brazil was small and could be accelerated if selection considered the trait time effectively. With respect to the animal's country of birth, the results show that there has been an intense participation of foreign animals in breeding Brazilian Thoroughbreds.

Efeitos da transformação de uma variável com distribuição normal em sua inversa sobre os parâmetros de sua distribuição usando técnicas de Monte Carlo

Foram realizados quatro estudos de simulação para verificar a distribuição de inversas de variáveis com distribuição normal, em função de diferentes variâncias, médias, pontos de truncamentos e tamanhos amostrais. As variáveis simuladas foram GMD, com distribuição normal, representando o ganho médio diário e DIAS, obtido a partir da inversa de GMD, representando dias para se obter determinado peso. em todos os estudos, foi utilizado o sistema SAS® (1990) para simulação dos dados e para posterior análise dos resultados. As médias amostrais de DIAS foram dependentes dos desvios-padrão utilizados na simulação. As análises de regressão mostraram redução da média e do desvio-padrão de DIAS em função do aumento na média de GMD. A inclusão de um ponto de truncamento entre 10 e 25% do valor da média de GMD reduziu a média de GMD e aumentou a de DIAS, quando o coeficiente de variação de GMD foi superior a 25%. O efeito do tamanho dos grupos nas médias de GMD e DIAS não foi significativo, mas o desvio-padrão e CV amostrais médios de GMD aumentaram com o tamanho do grupo. em virtude da dependência entre a média e o desvio-padrão e da variação observada nos desvios-padrão de DIAS em função do tamanho do grupo, a utilização de DIAS como critério de seleção pode diminuir a acurácia da variação. Portanto, para a substituição de GMD por DIAS, é necessária a utilização de um método de análise robusto o suficiente para a eliminação da heterogeneidade de variância.

Influência do exercício aeróbio na renina de portadores de hipertensão arterial com sobrepeso

FUNDAMENTO: A atividade do sistema renina-angiotensina-aldosterona tem relação direta com sobrepeso e sedentarismo, e essas variáveis se associam à hipertensão arterial (HA). O exercício aeróbio propicia melhor controle da pressão arterial (PA) por agir nos mecanismos da regulação pressórica, dentre eles, a atividade de renina plasmática (ARP). OBJETIVO: Avaliar a influência do exercício aeróbio sobre ARP em portadores de HA com sobrepeso. MÉTODOS: Foram avaliados níveis pressóricos, bioquímicos e antropométricos pré e pós-treinamento de 16 semanas, três vezes por semana, a 60%-80% da frequência cardíaca máxima. Os dados foram expressos em média ± desvio padrão ou mediana e intervalo interquartílico, e analisados pelo teste t, Mann-Withney e ANOVA (p < 0,05). RESULTADOS: Vinte indivíduos apresentaram média de idade de 57 ± 7,0 anos e índice de massa corpórea de 30 ± 3,5 kg/m². O treinamento aeróbio promoveu a redução da porcentagem de gordura corporal (35 ± 7,8 para 30 ± 5,6 %), da frequência cardíaca (FC) (80 ± 10,4 para 77 ± 8,5 bpm) e da pressão de pulso (PP) (50 ± 11,8 para 46 ± 10,0 mmHg) na amostra geral (p < 0,05), sem redução da ARP, que variou de 0,8 (0,45-2,0) a 1,45 (0,8-2,15) ηg/ml/h (p = 0,055). No grupo com redução da circunferência abdominal (CA) (n = 8) houve redução da PA sistólica e PP (p < 0,05). No grupo sem redução da CA, nenhuma das variáveis pressóricas apresentou alteração. A ARP não se associou com nenhuma variável estudada. O efeito do treinamento aeróbio associou-se à redução da PP na casuística total e à redução da PA sistólica no subgrupo com redução da CA. CONCLUSÃO: O treinamento aeróbio não reduziu a ARP em hipertensos com sobrepeso.

Morphometric study of the root anatomy in furcation area of mandibular first molars

Furcation involvement in periodontal disease has been a challenge for the dentist. Objective: The aim of this study was to investigate root dimensions in the furcation area of 233 mandibular first molars. Material and Methods: Digital photomicrographs were used to obtain the following measurements on the buccal and lingual surfaces of each tooth: root trunk height (RT), horizontal interadicular distance obtained 1 mm (D1) and 2 mm (D2) below the fornix and interadicular angle (IA). Results: Mean standard deviation of buccal and lingual furcation measurements were, respectively, 1.37 +/- 0.78 mm and 2.04 +/- 0.89 mm for RT; 0.86 +/- 0.39 mm and 0.71 +/- 0.42 mm for D1; 1.50 +/- 0.48 mm and 1.38 +/- 0.48 mm for D2; 41.68 +/- 13.20 degrees and 37.78 +/- 13.18 degrees for IA. Statistically significant differences were found between all measured parameters for buccal and lingual sides (p<0.05, paired t test). Conclusions: In conclusion, the lingual furcation of mandibular first molars presented narrower entrance and longer root trunk than the buccal furcation, suggesting more limitation for instrumentation and worse prognosis to lingual furcation involvements in comparison to buccal lesions.

The effect of implant design on insertion torque and immediate micromotion

Objectives: To evaluate the effect of insertion torque on micromotion to a lateral force in three different implant designs. Material and methods: Thirty-six implants with identical thread design, but different cutting groove design were divided in three groups: (1) non-fluted (no cutting groove, solid screw-form); (2) fluted (901 cut at the apex, tap design); and (3) Blossomt (Patent pending) (non-fluted with engineered trimmed thread design). The implants were screwed into polyurethane foam blocks and the insertion torque was recorded after each turn of 901 by a digital torque gauge. Controlled lateral loads of 10N followed by increments of 5 up to 100N were sequentially applied by a digital force gauge on a titanium abutment. Statistical comparison was performed with two-way mixed model ANOVA that evaluated implant design group, linear effects of turns and displacement loads, and their interaction. Results: While insertion torque increased as a function of number of turns for each design, the slope and final values increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- standard deviation [SD] = 64.1 +/- 26.8, 139.4 +/- 17.2, and 205.23 +/- 24.3 Ncm, respectively). While a linear relationship between horizontal displacement and lateral force was observed for each design, the slope and maximal displacement increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- SD 530 +/- 57.7, 585.9 +/- 82.4, and 782.33 +/- 269.4 mm, respectively). There was negligible to moderate levels of association between insertion torque and lateral displacement in the Blossomt, fluted and non-fluted design groups, respectively. Conclusion: Insertion torque was reduced in implant macrodesigns that incorporated cutting edges, and lesser insertion torque was generally associated with decreased micromovement. However, insertion torque and micromotion were unrelated within implant designs, particularly for those designs showing the least insertion torque.

Bond strength of adhesive restorations to Er : YAG laser-treated dentin

Background and Objective: evaluate the adhesion of adhesive restorations with and without a base of resin-modified glass-ionomer cement (RMGIC) to dentin irradiated with Er:YAG laser.Study Design/Materials and Methods: Twenty-four human molar teeth were divided into 6 groups (n=4): G1) 37% Phosphoric acid (PA) + Adhesive system (Ad) + Composite resin (CR); G2) RMGIC + CR; G3) Laser (60mJ-5Hz-20s) + PA + Ad + CR; G4) Laser (60 mJ-5 Hz-20 s) + RMGIC + CR; G5) Laser (100mJ-5Hz-20s) + PA + Ad + CR; G6) Laser (100mJ-5Hz-20s) + RMGIC + CR. Teeth were prepared, restored and cut into specimens, according to the treatment proposed and to methodology for microtensile test. Data were submitted to ANOVA and Tukey statistical tests (alpha=5%).Results:. The mean values for adhesion (MPa) and standard deviation (+/- SD) were: G1) 26.30(+/- 4.50), G2) 5.34(+/- 2.87), G3) 21.16(+/- 6.01), G4) 5.22(+/- 1.52), G5) 22.23(+/- 4.98), G6) 5.25(+/- 3.08).Conclusion: the use of Er:YAG laser did not influence on the restorations adhesion.

The Effect of Power Bleaching Actived by Several Light Sources on Enamel Microhardness

The purpose of this study was to evaluate the influence of different light sources for in-office bleaching on surface microhardness of human enamel. One hundred and five blocks of third molars were distributed among seven groups. The facial enamel surface of each block was polished and baseline Knoop microhardness of enamel was assessed with a load of 25 g for 5 s. Subsequently, the enamel was treated with 35% hydrogen peroxide bleaching agent and photo-activated with halogen light (group A) during 38 s, LED (group B) during 360 s, and high intensity diode laser (group C) during 4 s. The groups D (38 s), E (360 s), and F (4 s) were treated with the bleaching agent without photo-activated. The control (group G) was only kept in saliva without any treatment. Microhardness was reassessed after 1 day of the bleaching treatment, and after 7 and 21 days storage in artificial saliva. The mean percentage and standard deviation of microhardness in Knoop Hardness Number were: A 97.8 +/- 13.1 KHN; B 95.5 +/- 12.7 KHN; C 84.2 +/- 13.6 KHN; D 128.6 +/- 20.5 KHN; E 133.9 +/- 14.2 KHN; F 123.9 +/- 14.2 KHN; G 129.8 +/- 18.8 KHN. Statistical analysis (p < 0.05; Tukey test) showed that microhardness percentage values were significantly lower in the groups irradiated with light when compared with the non-irradiated groups. Furthermore, the non-irradiated groups showed that saliva was able to enhance the microhardness during the measurement times. The enamel microhardness was decreased when light sources were used during the bleaching process and the artificial saliva was able to increase microhardness when no light was used.

Shear bond strength of repairs in porcelain conditioned with laser

The aim of this study was to evaluate the shear bond strength of repairs in porcelain conditioned with laser. Sixty porcelain discs were made and six groups were formed (n = 10): G1: conditioning with laser with potency 760 mW; G2: conditioning with laser with potency 760 mW and application of 37% phosphoric acid for 15 s; G3: conditioning with laser with potency 900 mW; G4: conditioning with laser with potency 900 mW and application of 37% phosphoric acid for 15 s; G5: application of 37% phosphoric acid for 15 s (group control) and G6: application of 10% hydrofluoric acid for 2 min. The composite resin was insert of incremental layers at the porcelain surface aided with a metal matrix, and photoactivation for 20 s each increment. The specimens were submitted to a thermal cycling by 1000 cycles of 30 s in each bath with temperature between 5 and 55 degrees C. After the thermal cycling, specimens were submitted to the shear bond strength. The results were evaluated statistically through analysis of variance and Tukey's tests with 5% significance. The averages and standard deviation founded were: G1, 11.25 (+/- 3.10); G2, 12.32 (+/- 2.65); G3, 14.02 (+/- 2.38); G4, 13.44 (+/- 2,07); G5, 9.91 (-/+ 2,18); G6, 12.74 (+/- 2.67). The results showed that the femtosecond laser produced a shear bond strength of repairs in porcelain equal to the hydrofluoric acid and significantly superior to the use of phosphoric acid. Microsc. Res. Tech., 2012. (C) 2012 Wiley Periodicals, Inc.

Variabilidade espacial da densidade do solo sob manejo da irrigação

Este trabalho foi desenvolvido em um solo aluvial na Estação Experimental da Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Algodão, município de Souza, Estado da Paraíba, Brasil, com o objetivo de estudar a variabilidade espacial da densidade do solo. A área tem uma superfície cultivada de 17 ha e os testes de campo foram feitos em 40 pontos amostrais, locados na linha central longitudinal de cada parcela agrícola, eqüidistante de 50 m. Na determinação da densidade do solo, foi utilizado o método do anel volumétrico, em amostras com estrutura indeformada para as profundidades de 0-30, 30-60 e 60-90 cm. A variabilidade espacial foi determinada pela técnica de estatística clássica e da geoestatística. Na análise estatística clássica, a densidade do solo para as três profundidades apresentou baixos valores de desvio-padrão e coeficiente de variação, indicando pouca variação da densidade do solo com aumento da profundidade. A densidade do solo manifestou estrutura de dependência espacial, modelada por meio de semivariogramas, os quais permitiram a interpolação por Krigagem, apresentando estrutura esférica nas profundidades de 0-30 e 60-90 cm, com alcance de 46 m e estrutura exponencial com alcance de 255,10 m para a profundidade 30-60 cm.

Differential pulse voltammetric determination of nitrite with gold ultramicroelectrode

The application of disk shaped gold ultramicroelectrode for nitrite determination with and without addition of supporting electrolyte was studied using the differential pulse voltammetric method. The well-defined peak for nitrite oxidation near 0.8V (vs. Ag/AgCl reference electrode) was used to obtain analytical plots in the concentration range from 0.1 to 0.6 mmol L-1 and from 10.0 to 50.0 mu mol.L-1. The calculated detection limit was 0.65 mu mol.L-1 in purified water, in the absence of supporting electrolyte, with relative standard deviation of 1.36% (n=6) for analyzing 10.0 mu mol L-1 nitrite solutions, and accuracy of 100.9 %, based on recovery studies. The application of this analytical method to mineral and river water samples of natural pH also showed improved sensitivity when compared with the linear sweep voltammetric method previously reported.

A model for the plankton system of the Broa reservoir, Sao Carlos, Brazil

In this paper a model, called ELLOBO running in STELLA II, was set to describe the plankton system of the Broa reservoir (SP). The three state variables of the model are: phytoplankton, zooplankton, and the fish Astyanax fasciatus. The forcing variables are: temperature, nitrate, phosphorus and solar radiation. The model did not consider the cycling of nutrients inside the reservoir. The results show that: temperature is the principal forcing variable in the phytoplankton dynamic and in the subsequent evolution of the whole system. The zooplankton predation was described by Odum's equation, and there is a strong random component in zooplankton grazing, which was essential for the model, because zooplankton estimates have high variance. One must collect data in a short space of time (maybe daily) to better explain the zooplankton and phytoplankton variation. Validation was performed using simple statistics (arithmetic mean, standard deviation) and the results show concordance between observed and simulated values. Overhead was used to calibrate some parameters and to validate the model. The highest overhead value (5%) imply in the better accordance between estimated and;observed state variables values. We believe this approach in Broa reservoir will provide an useful tool for future research and it could be used comparatively in other continental aquatic ecosystems. (C) 2000 Elsevier B.V. B.V. All rights reserved.

Gap size measurement: the proposal of a new field method

In the tropical Atlantic Forest, 42 canopy gaps had their areas estimated using four different field methods of measurement: Runkle, Brokaw and Green [Runkle, J.R., 1981. Gap formation in some old-growth forests of the eastern United States. Ecology 62, 1041-1051; Brokaw, N.V.L., 1982. The definition of treefall gap and its effect on measures of forest dynamics. Biotropica 14, 158-160; Green, P.T., 1996. Canopy Gaps in rain forest on Christmas Island, Indian Ocean: size distribution and methods of measurement. J. Trop. Ecol. 12, 427-434] and a new method proposed in this work. It was found that within the same gap delimitation, average gap size varied from 56.0 up to 88.3 m(3) while total sum of gap area varied from 2351.3 to 3707.9 m(3) Differences among all methods and between pairs of method proved to be statistically significant. As a consequence, gap size-class distribution was also different between methods. When one method is held as a standard, deviation on average values of gap size ranged between 11.8 and 59.7% as deviations on single gap size can reach 172.8%. Implications on forest dynamics were expressed by the forest turnover rate that was 24% faster or 15% slower depending on the method adopted for gap measurement. Based on my results and on methods' evaluation, the use of a new method is proposed here for future research involving the measure of gap size in forest ecosystems. Finally, it is concluded that forest comparisons disregarding the influence of different methods of gap measurement should be reconsidered. (c) 2005 Elsevier B.V. All rights reserved.