2012 Community Tree Management Plan, Alburnett, IA, June 24, 2013

This plan was developed to assist Alburnett with the management, budgeting and future planning of their urban forest. Across the state, forestry budgets continue to decrease with more and more of that money spent on tree removal. With the anticipated arrival of Emerald Ash Borer (EAB), an invasive pest that kills native ash trees, it is time to prepare for the increased costs of tree removal and replacement planting. With proper planning and management of the current canopy in Alburnett, these costs can be extended over years and public safety issues from dead and dying ash trees mitigated. Trees are an important component of Alburnett’s infrastructure and one of the greatest assets to the community. The benefits of trees are immense. Trees provide the community with improved air quality, stormwater runoff interception, energy conservation, lower traffic speeds, increased property values, reduced crime, improved mental health and create a desirable place to live, to name just a few benefits. It is essential that these benefits be maintained for the people of Alburnett and future generations through good urban forestry management. Good urban forestry management involves setting goals and developing management strategies to achieve these goals. An essential part of developing management strategies is a comprehensive public tree inventory. The inventory supplies information that will be used for maintenance, removal schedules, tree planting and budgeting. Basing actions on this information will help meet Alburnett’s urban forestry goals.

Letter health consultation : Exposure to benzene from Equistar pyrolysis gasoline tank, Clinton, Iowa (2008)

The Iowa Department of Public Health (IDPH) has been asked by several citizens of Clinton, Iowa to evaluate potential health effects from exposure to benzene from an above ground tank located near a residential area. The above ground tank is managed by Equistar Chemicals, LP (Equistar) and is use to store pyrolysis gasoline prior to off-loading onto barges. The IDPH in cooperation with the Agency for Toxic Substances and Disease Registry (ATSDR) prepared this health consultation to review the air quality monitoring provided by Equistar and provide an evaluation of the health effects from exposure to benzene at the levels detected in ambient air near the tank. The information in this health consultation was current at the time of writing. Data that emerges later could alter this document’s conclusions and recommendations.

A spatially explicit life cycle inventory of the global textile chain

Life cycle analyses (LCA) approaches require adaptation to reflect the increasing delocalization of production to emerging countries. This work addresses this challenge by establishing a country-level, spatially explicit life cycle inventory (LCI). This study comprises three separate dimensions. The first dimension is spatial: processes and emissions are allocated to the country in which they take place and modeled to take into account local factors. Emerging economies China and India are the location of production, the consumption occurs in Germany, an Organisation for Economic Cooperation and Development country. The second dimension is the product level: we consider two distinct textile garments, a cotton T-shirt and a polyester jacket, in order to highlight potential differences in the production and use phases. The third dimension is the inventory composition: we track CO2, SO2, NO (x), and particulates, four major atmospheric pollutants, as well as energy use. This third dimension enriches the analysis of the spatial differentiation (first dimension) and distinct products (second dimension). We describe the textile production and use processes and define a functional unit for a garment. We then model important processes using a hierarchy of preferential data sources. We place special emphasis on the modeling of the principal local energy processes: electricity and transport in emerging countries. The spatially explicit inventory is disaggregated by country of location of the emissions and analyzed according to the dimensions of the study: location, product, and pollutant. The inventory shows striking differences between the two products considered as well as between the different pollutants considered. For the T-shirt, over 70% of the energy use and CO2 emissions occur in the consuming country, whereas for the jacket, more than 70% occur in the producing country. This reversal of proportions is due to differences in the use phase of the garments. For SO2, in contrast, over two thirds of the emissions occur in the country of production for both T-shirt and jacket. The difference in emission patterns between CO2 and SO2 is due to local electricity processes, justifying our emphasis on local energy infrastructure. The complexity of considering differences in location, product, and pollutant is rewarded by a much richer understanding of a global production-consumption chain. The inclusion of two different products in the LCI highlights the importance of the definition of a product's functional unit in the analysis and implications of results. Several use-phase scenarios demonstrate the importance of consumer behavior over equipment efficiency. The spatial emission patterns of the different pollutants allow us to understand the role of various energy infrastructure elements. The emission patterns furthermore inform the debate on the Environmental Kuznets Curve, which applies only to pollutants which can be easily filtered and does not take into account the effects of production displacement. We also discuss the appropriateness and limitations of applying the LCA methodology in a global context, especially in developing countries. Our spatial LCI method yields important insights in the quantity and pattern of emissions due to different product life cycle stages, dependent on the local technology, emphasizing the importance of consumer behavior. From a life cycle perspective, consumer education promoting air-drying and cool washing is more important than efficient appliances. Spatial LCI with country-specific data is a promising method, necessary for the challenges of globalized production-consumption chains. We recommend inventory reporting of final energy forms, such as electricity, and modular LCA databases, which would allow the easy modification of underlying energy infrastructure.

Energiankäytön tehostamispotentiaalit UPM-Pelloksen vaneritehtailla

UPM-Pelloksen vaneritehtaat muodostavat Euroopan suurimman vanerintuotantoyksiköntuotantokapasiteetilla mitattuna. Pelloksen vaneritehtailla on kolme eri tehdasta yhdellä tehdasalueella. Vaneritehtaiden viilunkuivaus on hyvin merkittävä primäärienergian kuluttaja. Tehtaiden prosessienergian saannista huolehtii Järvi-Suomen Voiman voimalaitos. Viilunkuivaajien poistokaasuista jalauhteista saadaan talteen merkittävästi sekundäärienergiaa. Sekundäärienergia kulutetaan pääosin hautomoaltaalla tukkien haudontaan. Tukkien haudonta pyritäänhoitamaan lähes kokonaan sekundäärienergialla. Primäärihöyryä tarvitaan altaalle kuitenkin huoltoseisakkien aikana. Tässä diplomityössä tutustutaan vanerin valmistuksen prosessiin Pelloksen vaneritehtailla. Työssä kartoitetaan tehtaiden prosessien, hautomoaltaan ja voimalaitoksen välisiä energiavirtauksia. Työn tarkoituksena on saada selville mahdollisia hyödyntämättömiä potentiaaleja tehtaiden energiankäytössä. Työssä pohditaan myös mahdollisia eri tapoja energiankäytön tehostukselle. Voimalaitoksen höyrykuorma on kuivauskoneiden kulutuksesta riippuen ajoittain voimakkaasti vaihtelevaa. Höyrykuorman vaihtelu aiheuttaa ongelmia voimalaitoksen tuotannolle. Työssä pohditaan höyrykuorman tasausmahdollisuutta muun muassa höyryakun avulla.

Impact des maladies rhumatismales sur la population âgée en Suisse et sa consommation de soins

Les maladies rhumatismales sont fréquemment observées chez les personnes âgées et ont un impact considérable sur la qualité de vie des personnes en souffrant. Peu d'études suisses sur la situation épidémiologique et sur l'impact de ce type de maladies sur la consommation des services de santé existent. Cette thèse a pour but d'étudier les connaissances actuelles à partir de la littérature suisse et étrangère et d'établir un bilan en Suisse au moyen d'une enquête de population effectuée en 1997. Une revue systématique de littérature a été effectuée. En dépit d'une grande variété des approches méthodologiques rendant délicates les comparaisons géographiques et temporelles, la prévalence des maladies rhumatismales chez les personnes de 65 ans et plus semble être homogène entre pays et stable temporellement. particulièrement dès 1980. Celle-ci est élevée et augmente rapidement avec le très grand âge. De plus, les femmes sont plus fréquemment atteintes que les hommes. Notre revue montre que le recours aux soins ambulatoires (médecins, chiropraticiens, traitements ambulatoires des hôpitaux) lié aux maladies rhumatismales est important. L'impact de ces maladies sur les hospitalisations est, par contre, moins clairement établi. Les nouvelles générations de personnes en souffrant semblent avoir plus recours aux services de santé que les précédentes. Ces maladies sont aussi à l'origine d'une forte consommation d'anti-inflammatoires non-stéroïdiens avec comme conséquence une multitude de complications. En dépit de son efficacité et de son utilité, le recours à l'arthroplastie est sous- utilisé. Notre analyse se base sur une enquête réalisée auprès d'un échantillon représentatif des individus âgés de 15 ans et plus résidant de manière permanente en Suisse en 1997 : la prévalence des maladies rhumatismales en Suisse s'élève à 41 % chez les personnes âgées de 65 ans et plus, dont 48 % chez les femmes et 31 % chez les hommes. Ces prévalences sont inférieures à celles relevées dans la littérature probablement en raison de notre définition relativement restrictive des maladies rhumatismales. Ces dernières augmentent de 50 % le nombre attendu de consultations chez un médecin ou un chiropraticien et de 30 % le nombre attendu d'hospitalisations. Les personnes souffrantes ont. en outre, une probabilité de recours aux services de Soins à domicile 1,7 fois plus élevé que les autres. Aucun impact sur le nombre de traitements ambulatoires en milieu hospitalier n'a été trouvé. Nos résultats sont comparables à ceux relevés dans la littérature internationale et suisse, sauf pour les traitements ambulatoires des hôpitaux. En 1990, sur les 983'400 personnes de 65 ans et plus (recensement fédéral de la population de 1990), 403'200 personnes souffraient de maladies rhumatismales. Quelque 5'334'900 consultations chez un médecin ou un chiropraticien, 4'959'300 consultations chez un médecin et 216'800 hospitalisations étaient imputables aux personnes de 65 ans et plus toutes causes de consultations confondues, dont 1'008'000 consultations chez un médecin/chiropraticien, 927'300 chez un médecin et 98'500 hospitalisations imputables aux maladies rhumatismales. Selon ie scénario (( tendance )) des projections démographiques publiées par l'Office Fédéral de la Statistique. d'ici 2040, le nombre de personnes souffrant de maladies rhumatismales en Suisse risque d'augmenter de 80 % (en supposant que la prévalence reste stable), affectant 726'500 sur 1'772'000 personnes de 65 ans et plus. Cette augmentation est la conséquence de l'accroissement prévu de la population de 65 ans et plus dans la population générale. Le nombre global de consultatiordhospitalisations risque d'augmenter dans les mêmes proportions si le recours aux services de santé reste stable. En effet. en 2040, quelque 9'613'100 consultations chez un médecinichiropraticien, 8'936'200 consultations chez un médecin et 390'700 hospitalisations pourraient être imputables aux personnes de 65 ans et plus. dont 1'8 16'300 consultations chez un médecin/chiropraticien, 1'67 1'000 consultations chez un médecin et 1 90'600 hospitalisations en raison de maladies rhumatismales. Une légère diminution du nombre de personnes atteintes de maladies rhumatismales. ainsi que du recours aux services de santé engendré par ces maladies. est attendue dès 3040. Le nombre de personnes souffrant de maladies rhumatismales et le nombre de consultations/ hospitalisations associées risquant d'augmenter de façon considérable, il est nécessaire de freiner cette progression. Des mesures préventives primaires, secondaires ou tertiaires peuvent diminuer la prévalence des maladies rhumatismales et l'impact de celles-ci sur la consommation des services de santé.<br/><br/>Rheumatic diseases are frequently observed in elderly people and have an important impact on tlieir life qurlity. There are fe1.v Swiss stuciies on the epiciemio!ogica! situttien and on the impact of such diseases on the use of health services. This thesis aims at studying the current knowledge based on Swiss and international literature and at establishing the situation in Switzerland from a population survey conducted in 1997. A systeinatic literature review lias been carried out. Despite a large range of methods making a comparisoii diffcult, the prevalence of rheumatic diseases seems to be homogeneous in different countries and stable. especially since 1980. It is high and increases rapidly with age. Furthermore, \niorneil suffer more frequently thaii men. Our review shows that the use of ambulatory care linked to rheumatic diseases is important. On the contrary, the impact of such diseases on hospitalization is less clearly established. New generations seem to consult more. Rheumatic diseases are also at the origin of a strong consumptioii of non-steroidal anti- inflammatory drugs \vitIl potential severe consequences. Despite its effectiveness and efficiency, arthroplasty is underused. Our analysis is based 011 a survey of Swiss permanent residents aged 15 or more in 1997. Based on Our analysis, the prevalence of rheumatic diseases in Switzerland is 41 % for elderly people (48 96 for women and 31 % for men). Theses prevalences are smaller than those found in the literature because of our relatively strict definition of rheumatic diseases. The latter diseases increase of about 50 o/o the expected number of consultations (chiropractor included or not) and of about 30 960 the expected number of hospitalizations. The affected persons have a probability of home care use 1.7 times higlier than the others. No impact on the number of outpatient care provided by hospitals has been found. Our results are comparable to those found in the international and Swiss literature, except for hospital outpatient care. In 1990, of 983,400 perçons aged 65 and older, 403,200 persons suffered from rheumatic diseases. 5,334,900 consultations by a physician or a chiropractor, 4,959,300 consultations by a physician and 2 16,800 hospitalizations were attributed to the elderly whatever, the reason of consultation, of which 1,008,000 consultations by a physicianlchiropractor, 927,300 by a physician, and 98,500 hospitalizations are due to rheumatic diseases. According to the "tendance" scenario of demographic projections published by the Swiss Federal Office of Statistics, until 2040 the number of persons suffering from rheumatic diseases will increase of 80 % if the prevalence stays stable, affecting 736,500 of 1,772,000 perçons of 65 and older. This increase is due to the increase of the percentage of persons 65 and older in the population. The global number of consultationshospitalizations will increase similarly if the use of health services stays stable. In 2040, 9,613,l 00 consultations by a physiciaidchiropractor, 8,936,200 Consultations by a physician and 390,700 hospitalizations could be attributed to the persons aged 65 and older, of which 1,816,300 consultations by a physician, 1,671,000 consultations by a physician/chiropractor and 109,600 hospitalizations will be due to the rheumatic diseases. However a small decrease of the number of affected perçons and of the subsequent use of health services is expected after 2040. The number of affected elderly people and the volume of conçultations/hospitalizations are expected to increase and it ir necessx-y to slow down this progression. Preventive interventions, primary, secondary or tertiary, can decrease the prevalence of rheumatic diseases and the impaci on the consumption of health services.

Short-term effects of particulate matters on pulse pressure in two general population studies.

OBJECTIVES: To explore the association of short-term exposure to particulate matter with aerodynamic diameters less than 10 μm (PM10) with pulse pressure, SBP, and DBP taking outdoor temperature into account in two large population-based studies in Switzerland. METHODS: We used data from the Bus Santé study including 5605 adults in Geneva and the CoLaus study including 6183 adults in Lausanne. PM10 and meteorological data were measured from fixed monitoring stations. We analyzed the association of short-term exposure to PM10 (on the day of examination visit and up to 7 days before) with pulse pressure, SBP, and DBP by linear regression, controlling for potential confounders and effect modifiers. RESULTS: Average PM10 levels were 22.4 μg/m in Geneva and 31.7 μg/m in Lausanne. In adjusted models, for each 10 μg/m increase in 7-day PM10 average, pulse pressure and SBP increased by 0.583 (95% confidence interval, 0.296-0.870) mmHg and 0.490 (0.056-0.925) mmHg in Geneva, and 0.183 (0.017-0.348) mmHg and 0.036 (0.042-0.561) mmHg in Lausanne, respectively. Stronger associations of pulse pressure and SBP with PM10 were observed when outdoor temperature was above 5°C. CONCLUSION: Positive associations of pulse pressure and SBP with short-term exposure to PM10 were found and replicated in the Swiss adult population. Our results suggest that even low levels of air pollution may substantially impact cardiovascular risk in the general population.

'Herbal' but potentially hazardous: an analysis of the constituents and smoke emissions of tobacco-free waterpipe products and the air quality in the cafes where they are served

BACKGROUND: There are limited data on the composition and smoke emissions of 'herbal' shisha products and the air quality of establishments where they are smoked. METHODS: Three studies of 'herbal' shisha were conducted: (1) samples of 'herbal' shisha products were chemically analysed; (2) 'herbal' and tobacco shisha were burned in a waterpipe smoking machine and main and sidestream smoke analysed by standard methods and (3) the air quality of six waterpipe cafes was assessed by measurement of CO, particulate and nicotine vapour content. RESULTS: We found considerable variation in heavy metal content between the three products sampled, one being particularly high in lead, chromium, nickel and arsenic. A similar pattern emerged for polycyclic aromatic hydrocarbons. Smoke emission analyses indicated that toxic byproducts produced by the combustion of 'herbal' shisha were equivalent or greater than those produced by tobacco shisha. The results of our air quality assessment demonstrated that mean PM2.5 levels and CO content were significantly higher in waterpipe establishments compared to a casino where cigarette smoking was permitted. Nicotine vapour was detected in one of the waterpipe cafes. CONCLUSIONS: 'Herbal' shisha products tested contained toxic trace metals and PAHs levels equivalent to, or in excess of, that found in cigarettes. Their mainstream and sidestream smoke emissions contained carcinogens equivalent to, or in excess of, those of tobacco products. The content of the air in the waterpipe cafes tested was potentially hazardous. These data, in aggregate, suggest that smoking 'herbal' shisha may well be dangerous to health.

Lentoaseman terminaalirakennuksen energiankäyttö ja sisäilmasto

Diplomityössä tarkasteltiin lentoaseman terminaalirakennuksen energia- ja ainevirtoja sekä sisäilman ominaisuuksia. Esimerkkikohteena oli Helsinki-Vantaan lentoaseman keskiterminaalirakennus, jonka 1. ja 2. rakennusvaiheen ulkovaippa muodosti taserajan. Taseen ulkopuolisista tekijöistä tarkasteltiin jäähdytysenergian tuotantoa ja ulkoilman laatua. Työn yhtenä tavoitteena oli muodostaa rakennukselle energiatase. Taseen avulla saatiin tietoa energian jakautumisesta eri toimintoihin ja löydettiin tekijät, joita suunnittelussa tulee painottaa. Terminaalin lähiympäristössä tutkittiin ulkoilman laatua mittausten avulla. Mittaustietoja käytetään apuna tulevaisuuden ilmanottosuunnittelussa. Työssä tarkasteltiin energia- ja ainevirtoina lämpö-, jäähdytys- ja sähköenergian sekä veden ostoa, tuotantoa ja kulutusta sekä prosessointia. Terminaalin lämpötarpeesta hieman yli puolet katettiin kaukolämmöllä. Loput noin 45 % lämpöenergiasta saatiin ns. ilmaisenergioista. Näistä merkittävimmäksi havaittiin sähkölaitteiden luovuttama lämpömäärä. Lämpöhäviöiden kannalta merkittäviä energiavirtoja olivat ilmanvaihdon ja vuotoilmojen kautta siirtyvät energiavirrat, joiden osuuden todettiin olevan noin 80 % terminaalin kokonaislämpöhäviöistä. Vaipan lämmöneristyskyky ja kyky absorboida auringon säteilyä todettiin hyviksi. Tulevaisuudessa tärkeitä suunnittelunäkökohtia tulevat olemaan ilmanvaihdon ja vuotoilman kautta siirtyvien energiavirtojen hallinta sekä sähköenergian ominaiskulutuksen pienentäminen. Ulkoilma todettiin mittauksin hyvätasoiseksi. Lento- ja maaliikenteen päästöarvot olivat lähellä toisiaan ja selvästi ohjearvoja alemmalla tasolla. Päästöjen sijaintiin vaikuttivat liikennemääriä enemmän tuuliolosuhteet. Tulevaisuudessa tuloilma voidaan johtaa terminaaliin yhtä hyvin joko lento- tai maaliikenteen puolelta.

Secondhand tobacco smoke exposure in open and semi-open settings: a systematic review

Background: Some countries have recently extended smoke-free policies to particular outdoor settings; however, there is controversy regarding whether this is scientifically and ethically justifiable. Objectives: The objective of the present study was to review research on secondhand smoke (SHS) exposure in outdoor settings. Data sources: We conducted different searches in PubMed for the period prior to September 2012. We checked the references of the identified papers, and conducted a similar search in Google Scholar. Study selection: Our search terms included combinations of"secondhand smoke,""environmental tobacco smoke,""passive smoking" OR"tobacco smoke pollution" AND"outdoors" AND"PM" (particulate matter),"PM2.5" (PM with diameter ≤ 2.5 µm),"respirable suspended particles,""particulate matter,""nicotine,""CO" (carbon monoxide),"cotinine,""marker,""biomarker" OR"airborne marker." In total, 18 articles and reports met the inclusion criteria. Results: Almost all studies used PM2.5 concentration as an SHS marker. Mean PM2.5 concentrations reported for outdoor smoking areas when smokers were present ranged from 8.32 to 124 µg/m3 at hospitality venues, and 4.60 to 17.80 µg/m3 at other locations. Mean PM2.5 concentrations in smoke-free indoor settings near outdoor smoking areas ranged from 4 to 120.51 µg/m3. SHS levels increased when smokers were present, and outdoor and indoor SHS levels were related. Most studies reported a positive association between SHS measures and smoker density, enclosure of outdoor locations, wind conditions, and proximity to smokers. Conclusions: The available evidence indicates high SHS levels at some outdoor smoking areas and at adjacent smoke-free indoor areas. Further research and standardization of methodology is needed to determine whether smoke-free legislation should be extended to outdoor settings.

Gas-phase photocatalytic oxidation of volatile organic compounds

Substances emitted into the atmosphere by human activities in urban and industrial areas cause environmental problems such as air quality degradation, respiratory diseases, climate change, global warming, and stratospheric ozone depletion. Volatile organic compounds (VOCs) are major air pollutants, emitted largely by industry, transportation and households. Many VOCs are toxic, and some are considered to be carcinogenic, mutagenic, or teratogenic. A wide spectrum of VOCs is readily oxidized photocatalytically. Photocatalytic oxidation (PCO) over titanium dioxide may present a potential alternative to air treatment strategies currently in use, such as adsorption and thermal treatment, due to its advantageous activity under ambient conditions, although higher but still mild temperatures may also be applied. The objective of the present research was to disclose routes of chemical reactions, estimate the kinetics and the sensitivity of gas-phase PCO to reaction conditions in respect of air pollutants containing heteroatoms in their molecules. Deactivation of the photocatalyst and restoration of its activity was also taken under consideration to assess the practical possibility of the application of PCO to the treatment of air polluted with VOCs. UV-irradiated titanium dioxide was selected as a photocatalyst for its chemical inertness, non-toxic character and low cost. In the present work Degussa P25 TiO2 photocatalyst was mostly used. In transient studies platinized TiO2 was also studied. The experimental research into PCO of following VOCs was undertaken: - methyl tert-butyl ether (MTBE) as the basic oxygenated motor fuel additive and, thus, a major non-biodegradable pollutant of groundwater; - tert-butyl alcohol (TBA) as the primary product of MTBE hydrolysis and PCO; - ethyl mercaptan (ethanethiol) as one of the reduced sulphur pungent air pollutants in the pulp-and-paper industry; - methylamine (MA) and dimethylamine (DMA) as the amino compounds often emitted by various industries. The PCO of VOCs was studied using a continuous-flow mode. The PCO of MTBE and TBA was also studied by transient mode, in which carbon dioxide, water, and acetone were identified as the main gas-phase products. The volatile products of thermal catalytic oxidation (TCO) of MTBE included 2-methyl-1-propene (2-MP), carbon monoxide, carbon dioxide and water; TBA decomposed to 2-MP and water. Continuous PCO of 4 TBA proceeded faster in humid air than dry air. MTBE oxidation, however, was less sensitive to humidity. The TiO2 catalyst was stable during continuous PCO of MTBE and TBA above 373 K, but gradually lost activity below 373 K; the catalyst could be regenerated by UV irradiation in the absence of gas-phase VOCs. Sulphur dioxide, carbon monoxide, carbon dioxide and water were identified as ultimate products of PCO of ethanethiol. Acetic acid was identified as a photocatalytic oxidation by-product. The limits of ethanethiol concentration and temperature, at which the reactor performance was stable for indefinite time, were established. The apparent reaction kinetics appeared to be independent of the reaction temperature within the studied limits, 373 to 453 K. The catalyst was completely and irreversibly deactivated with ethanethiol TCO. Volatile PCO products of MA included ammonia, nitrogen dioxide, nitrous oxide, carbon dioxide and water. Formamide was observed among DMA PCO products together with others similar to the ones of MA. TCO for both substances resulted in the formation of ammonia, hydrogen cyanide, carbon monoxide, carbon dioxide and water. No deactivation of the photocatalyst during the multiple long-run experiments was observed at the concentrations and temperatures used in the study. PCO of MA was also studied in the aqueous phase. Maximum efficiency was achieved in an alkaline media, where MA exhibited high fugitivity. Two mechanisms of aqueous PCO – decomposition to formate and ammonia, and oxidation of organic nitrogen directly to nitrite - lead ultimately to carbon dioxide, water, ammonia and nitrate: formate and nitrite were observed as intermediates. A part of the ammonia formed in the reaction was oxidized to nitrite and nitrate. This finding helped in better understanding of the gasphase PCO pathways. The PCO kinetic data for VOCs fitted well to the monomolecular Langmuir- Hinshelwood (L-H) model, whereas TCO kinetic behaviour matched the first order process for volatile amines and the L-H model for others. It should be noted that both LH and the first order equations were only the data fit, not the real description of the reaction kinetics. The dependence of the kinetic constants on temperature was established in the form of an Arrhenius equation.

Life cycle costs in heating, ventilation and air-conditioning systems with drive

Energy consumption and energy efficiency have become an issue. Energy consumption is rising all over the world and because of that, and the climate change, energy is becoming more and more expensive. Buildings are major consumers of energy, and inside the buildings the major consumers are heating, ventilation and air-conditioning systems. They usually run at constant speed without efficient control. In most cases HVAC equipment is also oversized. Traditionally heating, ventilation and air-conditioning systems have been sized to meet conditions that rarely occur. The theory part in this thesis represents the basics of life cycle costs and calculations for the whole life cycle of a system. It also represents HVAC systems, equipment, systems controls and ways to save energy in these systems. The empirical part of this thesis represents life cycle cost calculations for HVAC systems. With these calculations it is possible to compute costs for the whole life cycle for the wanted variables. Life cycle costs make it possible to compare which variable causes most of the costs from the whole life point of view. Life cycle costs were studied through two real life cases which were focused on two different kinds of HVAC systems. In both of these cases the renovations were already made, so that the comparison between the old and the new, now existing system would be easier. The study indicates that energy can be saved in HVAC systems by using variable speed drive as a control method.

Otimização de um mecanismo fotoquímico para a simulação da atmosfera urbana brasileira

A photochemical reaction mechanism for the description of air quality in Brazilian urban regions is described and evaluated by comparison with chamber experiments. The mechanism was developed for use in ozone modeling and application of control strategies. The oxidation of ethanol and methyl-ter-butyl-ether is also considered. Using this chemical model, a trajectory simulation of Brazil Avenue, Rio de Janeiro, was performed. The model predicts that ozone should reach a maximum of 22.4 ppb at 14:57 h. This value is in good agreement with the experimental measurements of 22.5 ppb for 14:00 h and 22.3 ppb for 15:00 h.

Análises seqüenciais de agrupamentos aplicadas ao estudo de partículas atmosféricas

The present paper has as objective to apply a sequential Cluster Analysis to the atmospheric particles: Hierarchical Cluster Analysis followed by Nonhierarchical Cluster Analysis. The hierarchical cluster analysis results were used as start point for the nonhierarchical cluster analysis as an agglomerative technique. These particles were taken from two areas of the metropolitan region of Porto Alegre, Charqueadas and Sapucaia do Sul., from may /97 to may/98, using a High Volume Sampler (Hi-Vol). Around 10,000 particles were analysed by Scanning Electron Microscope with Energy-Dispersive X-Ray microanalysis (SEM-EDS). The Hierarchical Cluster Analysis allowed the identification of five groups of particles, whose amounts were differentiated according to the summer and the winter campaigns. The abundance of each type of particles inside each group according to the different sections was verified by the Nonhierarchical Cluster Analysis, resulting in information about the emissions sources. The groups of particles of Si/Al and Si and of Fe/Zn and Fe for Charqueadas were more significant in section 2 and 3 (NW and W wind directions) and in section 1 (SE wind direction), evidencing the influence of the coal power plant and steel industry, respectively located in these quadrants. In Sapucaia do Sul the data were more heterogeneous, causing a certain difficulty to identify the source as anthropogenic. Nevertheless the group of particles containing Fe was found in sectors of NW/W wind directions which shows the influence of the steel plant.

Analytical challenges in breath analysis and its application to exposure monitoring

There is an increasing interest in the use of breath analysis for monitoring human physiology and exposure to toxic substances or environmental pollutants. This review focuses on the current status of the sampling procedures, collection devices and sample-enrichment methodologies used for exhaled breath-vapor analysis. We discuss the different parameters affecting each of the above steps, taking into account the requirements for breath analysis in exposure assessments and the need to analyze target compounds at sub-ppbv levels. Finally, we summarize the practical applications of exposure analysis in the past two decades

Effects of Weight Loss on Adipose Tissue, Liver and Heart Metabolism in Humans

Obesity has become the leading cause of many chronic diseases, such as type 2 diabetes and cardiovascular diseases. The prevalence of obesity is high in developed countries and it is also a major cause of the use of health services. Ectopic fat accumulation in organs may lead to metabolic disturbances, such as insulin resistance.Weight loss with very-low-energy diet is known to be safe and efficient. Weight loss improves whole body insulin sensitivity, but its effects on tissue and organ level in vivo are not well known. The aims of the studies were to investigate possible changes of weight loss in glucose and fatty acid uptake and perfusion and fat distribution at tissue and organ level using positron emission tomography and magnetic resonance imaging and spectroscopy in 34 healthy obese subjects. The results showed that whole-body insulin sensitivity increased after weight loss with very-low-energy diet and this is associated with improved skeletal muscle insulin-stimulated glucose uptake, but not with adipose tissue, liver or heart glucose uptake. Liver insulin resistance decreased after weight loss. Liver and heart free fatty acid uptakes decreased concomitantly with liver and heart triglyceride content. Adipose tissue and myocardial perfusion decreased. In conclusion, enhanced skeletal muscle glucose uptake leads to increase in whole-body insulin sensitivity when glucose uptake is preserved in other organs studied. These findings suggest that lipid accumulation found in the liver and the heart in obese subjects without co-morbidies is in part reversible by reduced free fatty acid uptake after weight loss. Reduced lipid accumulation in organs may improve metabolic disturbances, e.g. decrease liver insulin resistance. Keywords: Obesity, weight loss, very-low-energy diet, adipose tissue metabolism, liver metabolism, heart metabolism, positron emission tomography