Could the acid-base status of Antarctic sea urchins indicate a better-than-expected resilience to near-future ocean acidification?

Increasing atmospheric carbon dioxide concentration alters the chemistry of the oceans towards more acidic conditions. Polar oceans are particularly affected due to their low temperature, low carbonate content and mixing patterns, for instance upwellings. Calcifying organisms are expected to be highly impacted by the decrease in the oceans' pH and carbonate ions concentration. In particular, sea urchins, members of the phylum Echinodermata, are hypothesized to be at risk due to their high-magnesium calcite skeleton. However, tolerance to ocean acidification in metazoans is first linked to acid-base regulation capacities of the extracellular fluids. No information on this is available to date for Antarctic echinoderms and inference from temperate and tropical studies needs support. In this study, we investigated the acid-base status of 9 species of sea urchins (3 cidaroids, 2 regular euechinoids and 4 irregular echinoids). It appears that Antarctic regular euechinoids seem equipped with similar acid-base regulation systems as tropical and temperate regular euechinoids but could rely on more passive ion transfer systems, minimizing energy requirements. Cidaroids have an acid-base status similar to that of tropical cidaroids. Therefore Antarctic cidaroids will most probably not be affected by decreasing seawater pH, the pH drop linked to ocean acidification being negligible in comparison of the naturally low pH of the coelomic fluid. Irregular echinoids might not suffer from reduced seawater pH if acidosis of the coelomic fluid pH does not occur but more data on their acid-base regulation are needed. Combining these results with the resilience of Antarctic sea urchin larvae strongly suggests that these organisms might not be the expected victims of ocean acidification. However, data on the impact of other global stressors such as temperature and of the combination of the different stressors needs to be acquired to assess the sensitivity of these organisms to global change.

Optimización granulométrica de morteros de base cemento

En la práctica habitual, para la elaboración de morteros se recomienda la utilización de granulometrías continuas. El requisito de continuidad y que los tamaños de partícula se encuentren dentro de los límites establecidos por “husos granulométricos” surge de las teorías clásicas de Fuller – Thompson y se apoya en la necesidad de obtener mezclas con adecuada docilidad en el estado fresco. Sin embargo, las distribuciones continuas de árido no representan las únicas alternativas para obtener mezclas que tengan una adecuada docilidad en estado fresco y mediante nuevos criterios de interferencia de partículas es posible demostrar que las distribuciones discontinuas aun siendo más compactas y con menor requerimientos de volumen de pasta pueden ser igual de dóciles en estado fresco. Aunque el volumen mínimo de pasta está condicionado por su fluidez y viscosidad estos parámetros pueden modificarse mediante la incorporación de filler de distinta naturaleza y aditivos químicos de reciente desarrollo. En consecuencia, se propone analizar la posibilidad de minimizar el contenido de pasta de morteros de base cemento, manteniendo las prestaciones en el estado fresco, con el objetivo de obtener una mejor estabilidad volumétrica, posibilitando mejor control de la retracción y de la fisuración. Para ello se emplearán criterios de interferencia de partículas, combinados con el uso de filler de distinta naturaleza La reducción del contenido de pasta conducirá también a mejorar el perfil sostenible de los morteros. El proceso de optimización tiene una base racional y, por lo tanto, será aplicable a distintos tipos de mortero, y las proporciones óptimas podrán adecuarse según las prestaciones requeridas para el material. SUMMARY In common practice, continuous sand gradings are recommended to produce ordinary mortars. This requirement, along with grading limits are based on classical theories, such as Fuller, aimed at achieving a reasonable packing density without compromising workability at the fresh state. Nevertheless, there are other alternatives, such as discontinuous curves based on particle interference criteria, which are capable of having even higher packing density. The less the content of voids in the granular skeleton, the less the amount of cement paste required to fill in these voids and coating the particles. Yet, the minimum volume of paste in a mortar is determined by requirements associated to the fresh state and thus, fluidity and viscosity of the paste play a significant role on the matter. These two properties can be modified by the use of suitable fillers and by the use of last-generation chemical admixtures. As a result, it is proposed to analyse the possibility of combining current particle interference criteria with the use of different types of filler and chemical admixtures to optimise cement-based mortar formulations. This optimisation is aimed at reducing the paste content while maintaining a suitable performance at the fresh state. The reduction in paste content would lead to a better dimensional stability, with better control of shrinkage and cracking behaviour. The foreseen optimisation process will have a strong rational basis and thus, it should be potentially useful to optimise mortar proportions according to a performance-based approach.

Polypropylene fiber-reinforced self-compacting concrete for the reconstruction of the cathedral of La Laguna, Canary Island, Spain

High performance materials are needed for the reconstruction of such a singular building as a cathedral, since in addition to special mechanical properties, high self compact ability, high durability and high surface quality, are specified. Because of the project’s specifications, the use of polypropylene fiber-reinforced, self-compacting concrete was selected by the engineering office. The low quality of local materials and the lack of experience in applying macro polypropylene fiber for structural reinforcement with these components materials required the development of a pretesting program. To optimize the mix design, performance was evaluated following technical, economical and constructability criteria. Since the addition of fibers reduces concrete self-compactability, many trials were run to determine the optimal mix proportions. The variables introduced were paste volume; the aggregate skeleton of two or three fractions plus limestone filler; fiber type and dosage. Two mix designs were selected from the preliminary results. The first one was used as reference for self-compactability and mechanical properties. The second one was an optimized mix with a reduction in cement content of 20 kg/m3and fiber dosage of 1 kg/m3. For these mix designs, extended testing was carried out to measure the compression and flexural strength, modulus of elasticity, toughness, and water permeability resistance

Conexión con la meseta desde el Ebro medio de las vías romanas como base de la malla territorial de España

No tenemos conocimiento de ninguna red de caminos prerromanos que sirvieran como base de una posible malla territorial de España. Sin embargo, una sociedad prerromana sin caminos, por muy fragmentada y aislada que fuera, es algo improbable y mucho menos en la Edad del Hierro. Por eso en época prerromana existían infinidad de caminos, muchos de los cuales hoy han desaparecido y otros han sobrevivido, casi siempre con sus recorridos mejorados. Los pueblos prerromanos aprovecharon vías naturales de comunicación (ríos, vados, valles, puertos naturales, llanuras, etc.) para tender sus caminos. En sus orígenes no siguieron pautas concretas, si no que los caminos se originaban por el tránsito (de personas, ganados, mercancías, etc.) de un lugar a otro. De este modo la red viaria prerromana era caótica y anárquica: todo camino tenía numerosos ramales y variantes, según las necesidades. Pendientes excesivas, anchuras variables, etc., en decir eran vías espontáneas, surgidas sin ninguna planificación aparente. Los recorridos en general eran cortos, aunque algunas investigaciones actuales están demostrando que algunas de las cañadas ganaderas más importantes, como la Galiana, y de largo recorrido, eran de origen prerromano. En el caso de la península Ibérica, y más concretamente en el caso de la Meseta, el territorio estaba fragmentado en diversos pueblos y tribus, agrupados según criterios étnicos y culturales y con contactos con los pueblos próximos que motivan la preponderancia de caminos de recorrido cortos. Solo la necesidad de llevar los rebaños (de cabras y ovejas sobre todo) desde las serranías en verano a las llanuras en invierno, motivaría viajes más largos en los que algunas cañadas ganaderas jugarían un papel más importante. Con la llegada de los romanaos, se implantó en Hispania una densa red viaria, cuya construcción se prolongó durante toda la dominación romana, siendo reparadas muchas calzadas y vías en varias ocasiones. En época romana la red caminera era variada y estaba constituida por “las calzadas” que comunicaban puntos importantes, eran muy transitadas, de ahí que la administración romana las mantuviera siempre en buen estado, para asegurar el intercambio comercial entre zonas distintas, cobro de impuestos, etc. “Los caminos de tierra (viae terrenae)” que además de las calzadas, que podemos asemejar a las actuales carreteras de primer y segundo orden, constituían la infinidad de caminos locales y comarcales. Los trazados se realizaron unos en época romana, y otros muchos apoyándose en los caminos de la época prerromana, éstas vías no se realizaban buscando el recorrido más corto entre dos puntos, ni tampoco el más cómodo y con un firme estructural de menor importancia que en las calzadas. Tampoco estaban hechos para un tipo concreto de transporte, por lo que nos encontraríamos algunos que por su anchura permitían el paso de carros, y otros que sólo permitirían el paso a pie, a caballo o en burro. Solían ser, como hemos indicado, caminos de tierra con acabados en zahorras y recorridos en su mayor parte cortos y medianos. Dentro de la malla territorial de España las calzadas constituirían las denominadas “viae publicae” que constituían la red principal y esqueleto vertebrador de Hispania. Los caminos de tierra constituirían los denominados “actus” caminos de carácter regional que configuraban la mayor parte de la red. Muchas de las “viae publicae” y de los “actus” tendrían su origen en las “viae militares” que habrían sido los primeros construidos, apoyándose en muchas ocasiones en los caminos prerromanos, por los romanos para realizar la conquista de Hispania y que luego con la Paz romana habrían tenido otro tipo de uso. Dentro de estas “viae militares” tuvieron una importancia relevancia aquellas que se utilizaron en la conquista de la Celtiberia, culminada con la caída de Numantia. Dentro de ellas tuvo una importancia fundamental la vía romana del río Alhama, objeto de esta Tesis, que facilitaría el desplazamiento de los ejércitos romanos desde Graccurris, primera ciudad romana fundada en el Ebro medio, hasta Numantia. Desde la época Augusta, la vía romana del río Alhama, pasaría a formar parte de los denominados “actus” formando parte de la malla territorial de la Península Ibérica como vía de comunicación entre la Meseta y el Ebro Medio. We do not have knowledge of any network of ways prerromanos that were serving as base of a possible territorial mesh of Spain. Nevertheless, a company prerromana without ways, for very fragmented and isolated that was, is something improbable and great less in the Age of the Iron. Because of it in epoch prerromana existed infinity of ways, many of which today have disappeared and others have survived, almost always with his improved tours. The people prerromanos took advantage of natural routes of communication (rivers, fords, valleys, natural ports, plains, etc.) to stretch his ways. In his origins concrete guidelines did not continue, if not that the ways were originating for the traffic (of persons, cattle, goods, etc.) to and from. Thus the network viaria prerromana was chaotic and anarchic: all way had numerous branches and variants, according to the needs. Excessive slopes, variable widths, etc., in saying were spontaneous routes arisen without no apparent planning. The tours in general were short, though some current investigations are demonstrating that some of the most important cattle glens, as the Galiana, and of crossed length, were of origin prerromano. In case of the Iberian Peninsula, and more concretely in case of the Plateau, the territory was fragmented in diverse peoples and tribes, grouped according to ethnic and cultural criteria and with contacts with the near peoples that motivate the prevalence of short ways of tour. Only the need to take the flocks (of goats and sheeps especially) from the mountainous countries in summer to the plains in winter, would motivate longer trips in which some cattle glens would play a more important paper. With the arrival of the romanos, a dense network was implanted in Roman Spain viaria, whose construction extended during the whole Roman domination, being repaired many causeways and routes in several occasions. In Roman epoch the pertaining to roads network was changed and constituted by " the causeways " that were communicating important points, they were very travelled, of there that the Roman administration was supporting always in good condition, to assure the commercial exchange between different zones, collection of taxes, etc. "The dirt tracks (viae terrenae)" that besides the causeways, which we can make alike to the current roads of the first and second order, were constituting the infinity of local and regional ways. The tracings were realized some in Roman epoch, and great others resting on the ways of the epoch prerromana, these routes were not realized looking for the most short tour neither between points, two nor neither most comfortable and with a structural road surface of minor importance that in the causeways. They were not also done for a concrete type of transport, for what some of us would think that for his width they were allowing the step of cars, and others that only would allow the step afoot, astride or in donkey. They were in the habit of being, since we have indicated, dirt tracks with ended in zahorras and tours in his most short and medium. Inside the territorial mesh of Spain the causeways would constitute the called ones "viae publicae" that constituted the principal network and skeleton vertebrador of Roman Spain. The dirt tracks would constitute the "actus” called ways of regional character that were forming most of the network. Many of "viae publicae" and of the "actus" they would have his origin in " viae military" that would have been the first ones constructed, resting on many occasions on the ways prerromanos, for the Romans to realize the conquest of Roman Spain and that then with the Roman Peace they would have had another type of use. Inside these "viae military" had an importance relevancy those that were in use in the conquest of the Celtiberia, reached with Numantia's fall. Inside them a fundamental importance had the Roman route of the river Alhama, object of this Thesis, which would facilitate the displacement of the Roman armies from Graccurris, the first Roman city been founded on the average Ebro, up to Numantia. From the August epoch, the Roman route of the river Alhama, would happen to form a part of the "actus” forming a part of the territorial mesh of the Iberian Peninsula as road link between the Plateau and the Average Ebro.

A mathematical framework for finite strain elastoplastic consolidation. Part 1: Balance laws, variational formulation, and linearization

A mathematical formulation for finite strain elasto plastic consolidation of fully saturated soil media is presented. Strong and weak forms of the boundary-value problem are derived using both the material and spatial descriptions. The algorithmic treatment of finite strain elastoplasticity for the solid phase is based on multiplicative decomposition and is coupled with the algorithm for fluid flow via the Kirchhoff pore water pressure. Balance laws are written for the soil-water mixture following the motion of the soil matrix alone. It is shown that the motion of the fluid phase only affects the Jacobian of the solid phase motion, and therefore can be characterized completely by the motion of the soil matrix. Furthermore, it is shown from energy balance consideration that the effective, or intergranular, stress is the appropriate measure of stress for describing the constitutive response of the soil skeleton since it absorbs all the strain energy generated in the saturated soil-water mixture. Finally, it is shown that the mathematical model is amenable to consistent linearization, and that explicit expressions for the consistent tangent operators can be derived for use in numerical solutions such as those based on the finite element method.

Mathematical and Numerical Modeling in Maritime Geomechanics

A theoretical and numerical framework to model the foundation of marine offshore structures is presented. The theoretical model is composed by a system of partial differential equations describing coupling between seabed solid skeleton and pore fluids (water, air, oil,…) combined with a system of ordinary differential equations describing the specific constitutive relation of the seabed soil skeleton. Once the theoretical model is described, the finite element numerical procedure to achieve an approximate solution of the governing equations is outlined. In order to validate the proposed theoretical and numerical framework the seaward tilt mechanism induced by the action of breaking waves over a vertical breakwater is numerically reproduced. The results numerically attained are in agreement with the main conclusions drawn from the literature associated with this failure mechanism

Seismic performance case study of bridge pile cap foundation

The purpose of this report is to build a model that represents, as best as possible, the seismic behavior of a pile cap bridge foundation by a nonlinear static (analysis) procedure. It will consist of a reproduction of a specimen already built in the laboratory. This model will carry out a pseudo static lateral and horizontal pushover test that will be applied onto the pile cap until the failure of the structure, the formation of a plastic hinge in the piles due to the horizontal deformation, occurs. The pushover test consists of increasing the horizontal load over the pile cap until the horizontal displacement wanted at the height of the pile cap is reached. The output of this model will be a Skeleton curve that will plot the lateral load (kN) over the displacement (m), so that the maximum movement the pile cap foundation can reach before its failure can be calculated. This failure will be achieved when the load at that specific shift is equal to 85% of the maximum. The pile cap foundation finite element model was based on pile cap built for a laboratory experiment already carried out by the Master student Deming Zhang at Tongji University. Two different pile caps were tested with a difference in height above the ground level. While one has 0:3m, the other rises 0:8m above the ground level. The computer model was calibrated using the experimental results. The pile cap foundation will be programmed in a finite element environment called OpenSees (Open System for Earthquake Engineering Simulation [28]). This environment is a free software developed by Berkeley University specialized, as it name says, in the study of earthquakes and its effects on structures. This specialization is the main reason why it is being used for building this model as it makes it possible to build any finite element model, and perform several analysis in order to get the results wanted. The development of OpenSees is sponsored by the Pacific Earthquake Engineering Research Center through the National Science Foundation engineering and education centers program. OpenSees uses Tcl language to program it, which is a language similar to C++.

Discussion of “Initial Pore Pressure from Vertical Surface Loads” by Jacobo Bielak (September, 1982)

The author presents a very interesting application of the ideas developed by Scott to determine the initial pore pressure in excess of the hydrostatic pore pressure in linear, elastic, homogeneous and isotropic soil-skeleton. Scott demonstrates that under vertical surface loads the problem is governed by Laplace's equation. Nevertheless the writers' think that it could be interesting to state clearly the conditions under which this analogy can be applied.