819 resultados para AIDS risk behaviour
Resumo:
The category of the `at-risk' youth currently underpins a good deal of youth policy. Primarily, it centres around a range of programs associated with the need for state intervention. The `at-risk' youth tenuously appears at the intersection of a variety of knowledges/problematisations, such as vocational guidance, youth welfare, family management, and so on. Whilst it is argued that in some ways, the `at-risk' youth simply replaces older characterisations used in the policing of the young, it will also be argued that the preventative policies associated with `risk' are constituted in terms of factors rather than individuals, that prevention is no longer primarily based upon personal expertise, but rather upon the gathering and collation of statistical knowledge which identifies `risks' within given populations, and that `risk' legitimates unlimited governmental intervention. Importantly, the category of the `at-risk' youth underpins crucial sections of policy documents such as the Finn Report (into credentialling/education and vocational competency). In this case, youth is deemed to be `at-risk' of not making the transition to adulthood successfully. It will be argued that not only is the Finn Report significant in the administrative and cultural shaping of the category of `youth', but also by employing the notion of `risk', the Report puts in place yet another element of an effective network of governmental intelligibility covering the young. Finally, it will be argued that young women, as a specific an example of a `risk' group (vis-a-vis obtaining certain types of employment), require particular forms of intervention, primarily through changing the vocational aspirations of their parents.
Resumo:
Research has shown that road lane width impacts on driver behaviour. This literature review provides guidelines to assist in the design, construction and retrofitting of urban roads to accommodate road users' safety requirements. It focuses on the impacts of lane widths on cyclists and motor vehicle safety behaviour. The literature review commenced with a search of library databases. Peer reviewed articles and road authority (local, state and national) reports were reviewed. The majority of studies investigating the effects of lane width on driver behaviour were simulator based, while research into cycling safety involved data collected from actual traffic environments. Results show that marked road lane width influences perceived task difficulty, risk perception and possibly speed choice. The positioning of cyclists in traffic lanes is influenced by the presence of on-road cycling facilities and the total roadway width. The lateral displacement between bicycle and vehicle is smallest when a bicycle facility is present. Lower, or reduced, vehicle speeds play a significant role in improving bicyclist and pedestrian safety. It is also shown that if road lane widths in urban areas were reduced, to a functional width that was less than the current guidelines of 3.5m, it could result in a safer road environment for all road users.
Resumo:
Crash risk is the statistical probability of a crash. Its assessment can be performed through ex post statistical analysis or in real-time with on-vehicle systems. These systems can be cooperative. Cooperative Vehicle-Infrastructure Systems (CVIS) are a developing research avenue in the automotive industry worldwide. This paper provides a survey of existing CVIS systems and methods to assess crash risk with them. It describes the advantages of cooperative systems versus non-cooperative systems. A sample of cooperative crash risk assessment systems is analysed to extract vulnerabilities according to three criteria: market penetration, over-reliance on GPS and broadcasting issues. It shows that cooperative risk assessment systems are still in their infancy and requires further development to provide their full benefits to road users.
Resumo:
Despite the increasing popularity of social networking websites (SNWs), very little is known about the psychosocial variables which predict people’s use of these websites. The present study used an extended model of the theory of planned behaviour (TPB), including the additional variables of self-identity and belongingness, to predict high level SNW use intentions and behaviour in a sample of young people aged between 17 and 24 years. Additional analayses examined the impact of self-identity and belongingness on young people’s addictive tendencies towards SNWs. University students (N = 233) completed measures of the standard TPB constructs (attitude, subjective norm and perceived behavioural control), the additional predictor variables (self-identity and belongingness), demographic variables (age, gender, and past behaviour) and addictive tendencies. One week later, they reported their engagement in high level SNW use during the previous week. Regression analyses partially supported the TPB, as attitude and subjective norm signficantly predicted intentions to engage in high level SNW use with intention signficantly predicting behaviour. Self-identity, but not belongingness, signficantly contributed to the prediction of intention, and, unexpectedly, behaviour. Past behaviour also signficantly predicted intention and behaviour. Self-identity and belongingness signficantly predicted addictive tendencies toward SNWs. Overall, the present study revealed that high level SNW use is influenced by attitudinal, normative, and self-identity factors, findings which can be used to inform strategies that aim to modify young people’s high levels of use or addictive tendencies for SNWs.
Resumo:
Vertebrplasty involved injecting cement into a fractured vertebra to provide stabilisation. There is clinical evidence to suggest however that vertebroplasty may be assocated with a higher risk of adjacent vertebral fracture; which may be due to the change in material properties of the post-procedure vertebra modifying the transmission of mechanical stresses to adjacent vertebrae.
Resumo:
Understanding the complex dynamic and uncertain characteristics of organisational employees who perform authorised or unauthorised information security activities is deemed to be a very important and challenging task. This paper presents a conceptual framework for classifying and organising the characteristics of organisational subjects involved in these information security practices. Our framework expands the traditional Human Behaviour and the Social Environment perspectives used in social work by identifying how knowledge, skills and individual preferences work to influence individual and group practices with respect to information security management. The classification of concepts and characteristics in the framework arises from a review of recent literature and is underpinned by theoretical models that explain these concepts and characteristics. Further, based upon an exploratory study of three case organisations in Saudi Arabia involving extensive interviews with senior managers, department managers, IT managers, information security officers, and IT staff; this article describes observed information security practices and identifies several factors which appear to be particularly important in influencing information security behaviour. These factors include values associated with national and organisational culture and how they manifest in practice, and activities related to information security management.
Resumo:
This study explored the role of donor prototype evaluations (perceptions of the typical organ donor) in organ donation communication decisions using an extended theory of planned behaviour (TPB) model. The model incorporated attitude, subjective norm, perceived behavioural control, moral norm, self-identity, and donor prototype evaluations to predict intentions to record consent on an organ donor register and discuss the organ donation decision with significant others. Participants completed surveys assessing the extended TPB constructs related to registering (n = 359) and discussing (n = 282). Results supported a role for donor prototype evaluations in predicting discussing intentions only. Both extended TPB structural equation models were a good fit to the data, accounting for 74 and 76% of the variance in registering and discussing intentions, respectively. Participants’ self-reported discussing behaviour (but not registering behaviour given low numbers of behavioural performers) was assessed 4 weeks later, with discussing intention as the only significant predictor of behaviour (Nagelkerke R2 = 0.11). These findings highlight the impact of people's perceptions of a typical donor on their decisions to discuss their organ donation preference, assisting our understanding of the factors influencing individuals' communication processes in efforts to bridge the gap between organ supply and demand.
Resumo:
Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.
Resumo:
Describes a brief intensive program of cognitive therapy for depression that was designed for 4 adult residents of country towns in Australia, who resided some distance from treatment centers. Ss were assessed prior to treatment, at posttreatment, and at 4-wk, 8-wk, and 20-mo follow-ups. Treatments took place over 3 consecutive days for a total period of 15 hrs. Effects were highly consistent with the impact of group treatments delivered on a more traditional schedule. If confirmed in a controlled group study, these results suggest that cognitive therapy may be applied more economically and more widely than was previously realized.
Resumo:
Research has highlighted the relationship between vehicle speed and increased crash risk and severity. Evidence suggests that police speed enforcement, in particular speed camera operations, can be an effective tool for reducing traffic crashes. A quantitative survey of Queensland drivers (n = 852) was conducted to investigate the impact of police speed enforcement methods on self-reported speeding behaviour. Results indicate that visible enforcement was associated with significantly greater self-reported compliance than covert operations irrespective of the mobility of the approach, and the effects on behaviour were longer lasting. The mobility of operations appeared to be moderated the visibility of the approach. Specifically, increased mobility was associated with increase reported compliant behaviour, but only for covert operations, and increased longevity of reported compliant behaviour, but only for overt operations. The perceived effectiveness of various speed enforcement approaches are also analysed across a range of driving scenarios. Results are discussed in light of the small effect sizes. Recommendations for policy and future research are presented.
Resumo:
The wide range of contributing factors and circumstances surrounding crashes on road curves suggest that no single intervention can prevent these crashes. This paper presents a novel methodology, based on data mining techniques, to identify contributing factors and the relationship between them. It identifies contributing factors that influence the risk of a crash. Incident records, described using free text, from a large insurance company were analysed with rough set theory. Rough set theory was used to discover dependencies among data, and reasons using the vague, uncertain and imprecise information that characterised the insurance dataset. The results show that male drivers, who are between 50 and 59 years old, driving during evening peak hours are involved with a collision, had a lowest crash risk. Drivers between 25 and 29 years old, driving from around midnight to 6 am and in a new car has the highest risk. The analysis of the most significant contributing factors on curves suggests that drivers with driving experience of 25 to 42 years, who are driving a new vehicle have the highest crash cost risk, characterised by the vehicle running off the road and hitting a tree. This research complements existing statistically based tools approach to analyse road crashes. Our data mining approach is supported with proven theory and will allow road safety practitioners to effectively understand the dependencies between contributing factors and the crash type with the view to designing tailored countermeasures.
Resumo:
Any cycle of production and exchange – be it economic, cultural or aesthetic – involves an element of risk. It involves uncertainty, unpredictability, and a potential for new insight and innovation (the boom) as well as blockages, crises and breakdown (the bust). In performance, the risks are plentiful – economic, political, social, physical and psychological. The risks people are willing to take depend on their position in the exchange (performer, producer, venue manager or spectator), and their aesthetic preferences. This paper considers the often uncertain, confronting or ‘risky’ moment of exchange between performer, spectator and culture in Live Art practices. Encompassing body art, autobiographical art, site-specific art and other sorts of performative intervention in the public sphere, Live Art eschews the artifice of theatre, breaking down barriers between art and life, artist and spectator, to speak back to the public sphere, and challenge assumptions about bodies, identities, memories, relationships and histories. In the process, Live Art frequently privileges an uncertain, confrontational or ‘risky’ mode of exchange between performer, spectator and culture, as a way of challenging power structures. This paper examines the moment of exchange in terms of risk, vulnerability, responsibility and ethics. Why the romance with ‘risky’ behaviours and exchanges? Who is really taking a risk? What risk? With whose permission (or lack thereof)? What potential does a ‘risky’ exchange hold to destabilise aesthetic, social or political norms? Where lies the fine line between subversive intervention in the public sphere and sheer self-indulgence? What are the social and ethical implications of a moment of exchange that puts bodies, beliefs or social boundaries at ‘risk’? In this paper, these questions are addressed with reference to historical and contemporary practices under the broadly defined banner of Live Art, from the early work of Abrovamic and Burden, through to contemporary Australian practitioners like Fiona McGregor.
Resumo:
Purpose: The purpose of this paper is to analyse the risk management process conducted by some private and not-for-profit affordable housing providers in South East Queensland, and draw conclusions about the relationship between risk assessments/responses and past experiences.----- Design/methodology/approach: In-depth interviews of selected non-government housing providers have been conducted to facilitate an understanding of their approach to risk assessment in developing and in managing affordable housing projects. Qualitative data are analysed using thematic analysis to find emerging themes suggested by interview participants.----- Findings: The paper finds that informal risk management process is used as part of normal business process in accordance with industry standards. Many interviewees agree that the recognition of financial risk and the fear of community rejection of such housing projects have restrained them from committing to such investment projects. The levels of acceptance of risk are not always consistent across housing providers which create opportunities to conduct multi-stakeholder partnership to reduce overall risk.----- Research limitations/implications: The paper has implications for developers or investors who seek to include affordable housing as part of their portfolio. However, data collected in the study are a cross-section of interviews that will not include the impact on recent tax incentives offers by the Australian Commonwealth Government.----- Practical implications: The study suggests that implementing improvements to the risk mitigation and management framework may assist in promoting the supply of affordable housing by non-government providers.----- Originality/value: The focus of the study is the interaction between partnerships and risk management in development and management of affordable rental housing.
Resumo:
First-degree relatives of men with prostate cancer have a higher risk of being diagnosed with prostate cancer than men without a family history. The present review examines the prevalence and predictors of testing in first-degree relatives, perceptions of risk, prostate cancer knowledge and psychological consequences of screening. Medline, PsycInfo and Cinahl databases were searched for articles examining risk perceptions or screening practices of first-degree relatives of men with prostate cancer for the period of 1990 to August 2007. Eighteen studies were eligible for inclusion. First-degree relatives participated in prostate-specific antigen (PSA) testing more and perceived their risk of prostate cancer to be higher than men without a family history. Family history factors (e.g. being an unaffected son rather than an unaffected brother) were consistent predictors of PSA testing. Studies were characterized by sampling biases and a lack of longitudinal assessments. Prospective, longitudinal assessments with well-validated and comprehensive measures are needed to identify factors that cue the uptake of screening and from this develop an evidence base for decision support. Men with a family history may benefit from targeted communication about the risks and benefits of prostate cancer testing that responds to the implications of their heightened risk.