New technique for capillary electrophoresis directly coupled with end-column electrochemiluminescence detection

capillary electrophoresis (CE) is characterized. A 300 mum diameter Pt working electrode was used to directly couple with a 75 mum inner diameter separation capillary without an electric field decoupler. The hydrodynamic cyclic voltammogram (CV) of Ru(bpy)(3)(2+) showed that electrophoretic current did not affect the ECL reaction. The presence of high-voltage (HV) field only resulted in the shift of the ECL detection potential. The distance of capillary to electrode was an important parameter for optimizing detection performance as it determined the characteristics of mass transport toward the electrode and the actual concentration of Ru(bpy)(3)(2+) in the detection region. The optimum distance of capillary to electrode was decided by the inner diameter of the capillary, too. For a 75 mum capillary, the working electrode should be placed away from the capillary outlet at a distance within the range of 20-260 mum. The effects of pH value of ECL solution and molecular structure of analytes on peak height and theoretical plate numbers were discussed. Using the 75 mum capillary, under the optimum conditions, the method provided a linear range for tripropylamine (TPA) between 1 x 10(-10) and 1 X 10(-5) mol/L with correlation coefficient of 0.998. The detection limit (signal-to-noise ratio S/N = 3) was 5.0 x 10(-11) mol/L. The relative standard deviation in peak height for eight consecutive injections was 5.6%. By this new technique lidocaine spiked in a urine sample was determined. The method exhibited the linear range for lidocaine from 5.0 x 10(-8) to 1.0 X 10(-5) mol/L with correlation efficient of 0.998. The limit of detection (S/N = 3) was 2.0 x 10(-1) mol/L.

Identification of high-lying odd energy levels of uranium by resonant ionization mass spectrometry

Single-colour and two-colour multiphoton resonant ionization spectra of uranium atom were studied extensively with a Nd: YAG laser-pumped dye laser atomic beam apparatus time-of-flight mass spectrometer in our laboratory. The energy locations of high-lying odd-parity levels in the region 33 003-34 264 cm(-1),mearured by a two-colour three-step ionization technique, were reported here. The angular momentum quantum number J was uniquely assigned for these levels by using angular momentum selection rules.

用共振电离质谱测定铀原子奇宇称高激发态能级

对铀原子单色和双色多光子共振电离光谱开展了深入的研究。报道了用双色三步共振光电离技术测量位于 330 0 3～ 34 2 6 4cm- 1 范围内的奇宇称高激发态能级的位置。利用总角动量选择定则指定了这些能级的总角动量 J值。

Oxidation of ascorbic acid by dopamine incorporated in mimetic biomembrane

A kind of mimetic biomembrane-cast lipid film was made onto a glassy carbon electrode. Dopamine can be incorporated into the film. The oxidation of 2.0 x 10(-3) mol/L ascorbic acid with dopamine in the film was investigated. The oxidation overpotential of ascorbic acid was reduced by about 260 mV.

Hydrogen peroxide biosensor based on sol-gel-derived glasses doped with Eastman AQ polymer

A hydrogen peroxide biosensor based on sol-gel-derived glasses doped with poly(ester sulfonic acid) Eastman AQ 55D was constructed. Thionine (TH), as a mediator, was incorporated in this matrix by electrostatic force between TH+ and the negatively charged sulfonic acid group in Eastman AQ polymer. Performance and characteristics of the sensor were evaluated with respect to response time, sensitivity and storage stability. The enzyme electrode has a sensitivity of 11.36 muA mM(-1) with a detection limit of 5.0 x 10(-7) M H2O2, and the sensor achieved 95% of the steady state current within 20 s. (C) 2001 Elsevier Science B.V. All rights reserved.

A new type of polymer-supported metallocene catalyst for ethylene polymerization

A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.

In-situ Fourier transform infrared spectroelectrochemistry as a probe of the glassy carbon electrode chemically modified by nickel (II)-cyanometallates

A new nickel (II)-cyanometallates modified on glassy carbon electrode was prepared by a new method and studied by cyclic voltammetry and in situ Fourier transform infrared (FTIR) spectroelectrochemistry. It was found that the NiHCF film existed in two forms: Ni2Fe(II)-(CN)(6) and M2NiFe(II)(CN)(6), Fe(CN)(3)(6-) codeposited in the NiHCF film existing in free cation or bridged-bond state depended on the property of the cations in electrolyte: in NaCl and LiCl solution, it is in bridges-bonded, but in HCl and KCl, it is free.

Luminescence characteristics of europium and terbium complexes with 1,10-phenanthroline in-situ synthesized in a silica matrix by a two-step sol-gel process

In-situ synthesis of europium and terbium complexes with 1,10-phenanthroline (phen) in silica matrix by a two-step sol-gel process has been proposed. The formation of europium and terbium complexes with phen in sol-gel derived silica gel were confirmed by the luminescence excitation spectra. The silica gels that contain in-situ synthesized europium and terbium complex exhibit the characteristic emission bands of the rare earth ions. Furthermore. the rare earth ions present longer fluorescence lifetimes than the comparable pure complex powder and the complexes dissolved in ethanol solutions. The luminescence properties of the silica gels codoped with europium (or terbium) and phen were also investigated with respect to the gels doped with europium (or terbium). (C) 1999 Elsevier Science B.V. All rights reserved.

六氰亚铁酸镍修饰玻碳电极的现场红外光谱电化学研究

报道了一种制备六氰亚铁酸镍玻碳修饰电极(NiHCF/GC)的电化学方法,并用循环伏安(CV)和现场红外光谱电化学(FTIRs)方法对该修饰电极进行了研究.结果表明该电极上的NiHCF修饰膜有两种结构:Ni_2Fe(Ⅱ)(CN)_6和M_2NiFe(Ⅱ)(CN)_6,M为碱金属离子.M_2NiFe(CN)_6结构具有阳离子选择性,而阳离子对Ni_2Fe(Ⅱ)(CN)_6电化学反应的影响是间接的.FTLRs研究还表明在膜制备过程中Fe(CN)_6~(4-)发生了共沉积,其存在形式与支持电解质中阳离子的性质有关:在Na~+和Li~+溶液中,主要以桥式结构存在;而在K~-和H~-溶液中,主要为离子对形式.

细胞色素C在聚乙烯氧化物修饰的金电极上的直接电化学反应

本文报道了细胞色素Ｃ在聚乙烯氧化物（ＰＥＯ）修饰的金电极上的直接电化学行为，发现ＰＥＯ是细胞色素Ｃ电化学反应的促进剂，ＰＥＯ修饰膜的形态对细胞色素Ｃ电化学反应的可逆性有较大的影响.

钒元素在铬铝丙烷氧化脱氢催化剂中的助催化作用

研究了丙烷在以钒元素为助剂的ＣｒＡｌＯ催化剂上的氧化脱氢反应性能。利用ＸＲＤ、ＤＲＳ、ＸＰＳ等方法，讨论了钒元素的助催化作用。实验结果表明，钒元素的添加，使得催化剂表面产生Ｏ物种，并且可以改变催化剂的表面组成，提高催化剂表面Ｃｒ３＋的浓度，从而影响催化剂的氧化脱氢活性。

4-羟基偶氮苯与6-氯-5,12-萘并萘醌反应产物的NMR分析

无水碳酸钾存在下6-氯-5,12-萘并萘醌与4-羟基偶氮苯在干燥DMF中反应的主要产物在某些反应条件下不是6[4-(苯基偶氮基)苯氧基]-5,12-萘并萘醌(1)。该未知反应产物2经核磁共振方法研究证实是6-(N,N-二甲氨基)-5,12-萘并萘醌。本文对化合物2的~1H-和~(13)C化学位移、偶合信息和结构作了详细归属,并推测其反应进程,实验结果表明,化合物2是由化合物1与溶剂DMF反应生成。

聚酰亚胺微孔膜疏水化用于膜蒸馏

采用聚合物表面涂覆改性的方法，将疏水性聚合物硅橡胶涂覆在聚酰亚胺亲水微孔膜上，制得了具有良好膜蒸馏性能的聚酰亚胺疏水微孔复合膜。研究了涂覆工艺条件对所得聚酰亚胺疏水微孔复合膜的膜蒸馏性能的影响。结果表明，控制适当工艺条件可制得具有高膜蒸馏通量的聚酰亚胺微孔复合膜，其透过系数可达２．１７×１０－３ｋｇ／ｍ２·ｈ·Ｐａ。该改性聚酰亚胺疏水微孔复合膜使用３７ｄ后，截留率仍保持在９９．５％以上，具有较长使用寿命。

The crystal structure and drawing-induced polymorphism in poly(aryl ether ketone)s .1. Poly(oxybiphenyl-4-4'-diyloxy-1,4-phenylenecarbonyl-1,3-phenylenecarbonyl-1,4-phenylene)

Crystal structure and polymorphism induced by uniaxial drawing of a poly(aryl ether ketone) [PEDEKmK] prepared from 1,3-bis(4-fluorobenzoyl)benzene and biphenyl-4,4'-diol have been investigated by means of transmission electron microscopy (TEM), electron diffraction (ED), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC) techniques. The melting and recrystallization process in the temperature range of 250-260 degrees C, far below the next melting temperature (306 degrees C), was identified and found to be responsible for the remarkable changes in lamellar morphology. Based on WAXD and ED patterns, it was found that crystal structure of isotropic-crystalline PEDEKmK obtained under different crystallization conditions (melt-crystallization, cold-crystallization, solvent-induced crystallization, melting-recrystallization, and crystallization from solution) keeps the same mode of packing, i.e., a two-chain orthorhombic unit cell with the dimensions a = 0.784 nm, b = 0.600 nm, and c = 4.745 nm (form I). A second crystal modification (form II) can be induced by uniaxial drawing above the glass transition temperature, and always coexists with form I. This form also possesses an orthorhombic unit cell but with different dimensions, i.e., a = 0.470 nm, b = 1.054 nm, c = 5.064 nm. The 0.32 nm longer c-axis of form II as compared with form I is attributed to an overextended chain conformation due to the expansion of ether and ketone bridge bond angles during uniaxial drawing. The temperature dependence of WAXD patterns for the drawn PEDEKmK suggests that form II can be transformed into the more stable form I by relaxation of overextended chains and relief of internal stress at elevated temperature in absence of external tension.

长链烷氧基取代苯基卟啉衍生物的解吸电子离子化质谱

长链烷氧基取代苯基卟啉化合物是一类性能良好的充电膜材料及照相感光材料.本文对合成一系列四-(对-烷氧基笨基)卟啉(取代基如式(1)R1=R2=R3=R4=H;(2)R1=C16H33,R2=R3=R4=H;(3)R1=R2=C16H33,R3=R4=H;(4)R1=R2=R3=C16H33,R4=H;(5)R1=R2=R3=R4=C16H33)进行质谱分进,结果表明,当用DEI电离方式时,不仅能给出较大丰度的分子离子峰,而且其EDIMS谱还清楚地反映出卟啉苯环羟基氢取代基团的丢失规律.然而其他电离方式却难以达到这样的效果.2 样品与仪器 部分所用样品承吉林大学王永祥博士赠送.质谱实验在 VG公司生产的 Quattro三级四极串联质谱仪上进行,采用DCI方式进样,但不通反应气故称DEI,离子源温度为100℃,发射电流260μA,用IBM386数据系统采集数据.