长白山北坡植物群落复杂性的海拔梯度变化(英文)

应用梯度格局法在长白山北坡海拔700m-2600m的坡面上每100 m海拔设置一样地,共计20块样地,通过对同一群落各样方间的相异性测定,对各海拔植物群落的复杂性进行了分析。结果表明,以主林层乔木种的二元数据计算的结果,除亚高山岳桦林外,其它各海拔群落的样方间均表现出较高的相异性,特别是低海拔的阔叶红松林平均相异系数达0.74,明显高于其它植被类型;暗针叶林各群落间差异不大,相对而言1400 m群落样方间的相异性略高于其它群落,表现出过渡性群落树种组成的复杂性;岳桦林树种组成简单,样[(\267\275\274\344\322\262\261\355\317\326\263\366\275\317\270\337\265\304\\317\340\313\306\320\324\241\243)-0.1(\322\324\271\340\304\276\326\326\265\304\266\376\324\252\312\375\276\335\\274\306\313\343\265\304\310\272)]落内的相异性,虽低海拔的阔叶红松林总体上高于其它群落,但差异趋势并不像乔木种那么明显。以各草本植物与所有植物种的二元数据计算的各海拔群落内样方间的相异性,表现出非常相近的趋势,群落内样方间草本植物及所有植物种均以阔叶红松林及高山冻原差异最大,暗针叶林基本稳定于比较相近的水平。图3表1参8。

Determination of peptides and amino acids from wool and beer with sensitive fluorescent reagent 2-(9-carbazole)-ethyl chloroformate by reverse phase high-performance liquid chromotography and liquid chromotography mass spectrometry

A new method for the sensitive determination of amino acids and peptides using the tagging reagent 2-(9-carbazole)-ethyl chloroformate (CEOC) with fluorescence (FL) detection has been developed. Identification of derivatives was carried out by liquid chromotography mass spectrometry. The chromophore in the 2-(9-fluorenyl)-ethyl chloroformate (FMOC) reagent was replaced by carbazole, which resulted in a sensitive fluorescence lerivatizing agent CEOC. CEOC can easily and quickly label peptides and amino acids. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography. Studies on derivatization demonstrate excellent derivative yields over the pH range 8.8-10.0. Maximal yields close to 100% are observed with three- to fourfold molar reagent excess. Derivatives exhibit strong fluorescence and allow direct injection of the reaction mixture with no significant disturbance from the major fluorescent reagent degradation by-products, such as 2(9-carbazole)-ethanol and bis-(2-(9-carbazole)-ethyl) carbonate. In addition, the detection responses for CEOC derivatives are compared to those obtained with FMOC. The ratios AC(CEOC)/AC(FMOC) = 1.00-1.82 for fluorescence (FL) response and AC'(CEOC)/AC'(FMOC) = 1.00-1.21 for ultraviolet (UV) response are observed (here, AC and AC' are, respectively, FL and UV F response). Separation of the derivatized peptides and amino acids has been optimized on a Hypersil BDS C18 column. Excellent linear responses are observed. This method was used successfully to analyze protein hydrolysates from wool and from direct-derivatized beer. (C) 2003 Elsevier Science (USA). All rights reserved.

黄绵土不同形态有机氮径流流失规律

利用不同坡度径流小区 ,在自然降水条件下 ,研究侵蚀泥沙不同形态有机氮的流失规律 ,结果表明 :在 4次产流泥沙中 ,除氨基糖氮含量减少外 ,其它有机形态氮均存在增加趋势 ,以氨态氮含量增加最为显著。随坡度的下降 ,水解全氮、氨态氮和氨基酸氮含量呈增加趋势 ;泥沙中水解全氮、氨基酸氮、氨态氮、非酸水解氮均存在不同程度的富集 ,其富集率随坡度的下降而增大 ,以氨基酸氮富集程度高 ,泥沙中氨基糖态氮反而无富集现象存在 ;当坡度分别为 2 5°、2 0°、15°、10°和 5°时 ,水解全氮流失量分别为 1135 .0、76 3.7、485 .5、313.0和 15 4.4kg/ km2 ,而氨基酸氮流失量则为 2 34.8、182 .7、12 1.1、76 .8和 33.9kg/ km2 ,占水解全氮的 2 0 .6 %～ 2 4.9%。氨态氮流失量为 742 .5、5 0 3.3、32 2 .2、2 0 8.9、97.4kg/ km2 ,占水解全氮的 6 3.1%～ 6 6 .7%。氨基糖氮占酸水解氮 1.1%～ 2 .9%。非鉴别氮占水解全氮的 5 .8%～ 12 .6 %。而酸水解氮与非酸水解氮之比分别为 ...

曲面效应法优化辅酶Q_(10)发酵条件

以根癌土壤杆菌(Agrobacterium tum efaciens)1.1416的突变株AGR 0610为出发菌株,采用P lackett-Burm an设计法(P lackett-Burm an design,P-B)对影响AGR 0610发酵产辅酶Q10的相关因素进行了研究,选取到4种有显著效应的因素:糖蜜、大豆蛋白胨、玉米浆和蛋氨酸.再采用响应曲面法(response surface m ethodology,RSM)对这4种因素的最佳水平范围进一步探讨,得到二次回归方程,优化了培养基组成.当这4种因素分别取值为1.02%、0.49%、0.29%和0.34%时,辅酶Q10产量有最大预测值38.88 mg/L,并被实验所证实.图6表4参8

水稻生育后期生化特性分析

以2个不同穗型品种辽粳326(直立型)和奥羽316(弯穗型)为试材,测定了水稻生育后期生理生化指标,每次取倒2叶进行测定,包括超氧化物歧化酶(SOD)、过氧化物酶(POX)、过氧化氢酶(CAT)和可溶性蛋白质含量。从测定结果来看,抽穗前辽粳326各项指标明显高于奥羽316,抽穗以后各项指标变化有所不同,体现了两品种不同的衰老特性。

Coal-burning roasted corn and chili as the cause of dental fluorosis for children in southwestern China

To find the pathologic cause of the children's dental fluorosis in southwestern China, diet structure before the age of 6 and prevalence rate of dental fluorosis (DF) of 405 children were investigated, and the fluorine and arsenic content of several materials were determined. The prevalence rate of DF of children living on roasted corn before the age of 6 is 100% with nearly 95% having the mild to severe DF; while that of children living on non-roasted corn or rice is less than 5% with all having very mild DF. The average fluorine and arsenic concentration are 20.26 mg/kg and 0.249 mg/kg in roasted corn, which are about 16 times and 35 times more than in non-roasted corn, respectively. The average fluorine concentration is 78 mg/kg in coal, 1116 mg/kg in binder clay and 313 mg/kg in briquette (coal mixed with clay). The average arsenic concentration of coal is 5.83 mg/kg, the binder clay is 20.94 mg/kg, with 8.52 mg/kg in the briquette. Living on roasted corn and chili is the main pathologic cause of endemic fluorosis in southwestern China. The main source of fluorine and arsenic pollution of roasted corn and chill is the briquette of coal and binder clay. (C) 2010 Elsevier B.V. All rights reserved.

Controlled release of urea encapsulated by starch-g-poly(L-lactide)

This paper presented a new approach for preparing a new type of slow-release membrane-encapsulated urea fertilizer with starch-g-PLLA as biodegradable carrier materials. By solution-casting and washing rapidly with water the urea was individually encapsulated within the starch matrix modified by L-lactide through in situ graft-copolymerization.

A zinc/p-sulfonatocalix[4]arene/phenanthroline supramolecular compound with novel (H2O)(10) water clusters

A supramolecular complex Zn-2[Cl2H8N2](2)[C28H2OS4O16][H2O](17.7) (1), has been synthesized under hydrothermal conditions, and characterized by IR spectroscopy, TG and DTA analysis, and single crystal X-ray diffraction. Unprecedented (H2O)(10) water clusters consisting of cyclic pentamer (H2O)(5) and five dangling water molecules were observed in the lattice.

In Situ Preparation and Luminescent Properties of CeF3 and CeF3:Tb3+ Nanoparticles and Transparent CeF3:Tb3+/PMMA Nanocomposites in the Visible Spectral Range

CeF3 and CeF3:Tb3+ nanoparticles were prepared by reverse microemulsion with a functional monomer, methyl methacrylate (MMA), as the oil phase, and CeF3:Tb3+/poly (methyl methacrylate) (PMMA) nanocomposites were obtained via polymerization of the MMA monomer. The nanoparticles and nanocomposites have been well characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), low- and high-resolution transmission electron microscope (TEM), selected-area electron diffraction (SAED), thermogravimetric analysis (TGA), UV/vis transmission spectra, photoluminescence excitation, and emission spectra and luminescence decays. The well-crystallized CeF3 and CeF3:Tb3+ nanoparticles are spherical with a mean diameter of 15 nm. They show the characteristic emission of Ce3+ 5d-4f (313 nm, D-2-F-2(5/2); 323 nm, D-2-F-2(7/2)) and Tb3+ D-5(4)-F-7(J) (J = 6-3, with D-5(4)-F-7(5) green emission at 541 nm as the strongest one) transitions, respectively.

Formation of low surface energy separators with undercut structures via a full-solution process and its application in inkjet printed matrix of polymer light-emitting diodes

In this paper, low surface energy separators With undercut structures were fabricated through a full solution process, These low Surface energy separators are more suitable for application in inkjet printed passive-matrix displays of polymer light-emitting diodes. A patterned PS film was formed on the P4VP/photoresist film by microtransfer printing firstly. Patterned Au-coated Ni film was formed on the uncovered P4VP/photoresist film by electroless deposition. This metal film was used as mask to pattern the photoresist layer and form undercut structures with the patterned photoresist layer. The surface energy of the metal film also decreased dramatically from 84.6 mj/m(2) to 21.1 mJ/m(2) by modification of fluorinated mercaptan self-assemble monolayer on Au surface. The low surface energy separators were used to confine the flow of inkjet printed PFO solution and improve the patterning resolution of inkjet printing successfully. Separated PFO stripes, complement with the pattern of the separators, formed through inkjet printing.

Synthesis, photoluminescence, thermoluminescence and dosimetry properties of novel phosphor KSr4(BO3)(3):Ce

Polycrystalline powder sample of KSr4(BO3)(3) was synthesized by high-temperature solid-state reaction. The influence of different rare earth dopants, i.e. Tb3+, TM3+ and Ce3+, on thermoluminescence (TL) of KSr4(BO3)(3) Phosphor was discussed. The TL, photoluminescence (PL) and some dosimetric properties of Ce3+-activated KSr4(BO3)(3) phosphor were studied. The effect of the concentration of Ce3+ on TL intensity was investigated and the result showed that the optimum Ce3+ concentration was 0.2 mol%. The TL kinetic parameters of KSr4(BO3)(3):0.002 Ce3+ phosphor were calculated by computer glow curve deconvolution (CGCD) method. Characteristic emission peaking at about 407 and 383 nm due to the 4f(0)5d(1) -> F-2((5/2),(7/2)) transitions of Ce3+ ion were observed both in PL and three-dimensional (3D) TL spectra. The dose-response of KSr4(BO3)(3):0.002 Ce3+ to gamma-ray was linear in the range from 1 to 1000 mGy. In addition, the decay of the TL intensity of KSr4(BO3)(3):0.002 Ce3+ was also investigated.

Synthesis of dodecenyl succinic anhydride (DDSA) corn starch

Dodecenly succinic anhydride (DDSA) starches were prepared commercially by the base catalyzed reaction of DDSA in pre-emulsion with starch granular in aqueous slurry. The results indicated that the degree of substitution and reaction efficiency were 0.0256% and 42.7%, respectively, at the parameters for the preparation of DDSA starches in starch slurry 30%, DDSA/starch radio 10% (wt/wt), pH 8.5-9.0, reaction temperature 313 K. After modification, product surface chemical composite had been changed which was prone to migrate into less polar solution. The chemical structural characteristics were investigated by methods of FTIR and H-1 NMR. The results of X-ray diffraction showed the native A-type crystalline pattern, indicating that reaction of corn starch with DDSA caused no change in the crystalline structure. Compared to native starch, the hydrophobic performance of esters was greatly increased. With the DS increasing, contact angles were gradually increased, however, the adhesion works were decreased. The maximum contact angle of DDSA starch could attend to 123 degrees, and the corresponding adhesion work was 33.2 mJ m(-2).