Resistivity (DC) method applied to aouifer protection studies

Resistivity (DC) method using vertical electrical soundings (Schlumberger array) are conducted In the vicinity of Canoas/RS, applied to environmental studies with the objective of Investigating groundwater conditions, The present paper shows a geoelectrlcal Identification of the lithology and an estimate of the relationship between the resistivity and Dar Zarrouk parameters (transverse unit resistance and longitudinal unit conductance) with the properties such as aquifer transmlssivlty and protection of ground water resources, In the saturated sediments, resistivity values defined the following sequence: clay layers (resistivity < 40 ohm-m) and sand layers (resistivity > 40 ohm-m), Two sand layers were identified; one corresponding to the unconfined aquifer and another to the confined aquifer between two clay layers, In the map of the transverse unit resistance of the unconfined aquifer, the tendencies of high values can be associated with the zones of high transmissivity; hence, these zones are suggested for the installation of monitoring wells, The map of longitudinal conductance Illustrates the Impermeability of the confining clay layer, Values of S > 1.0 siemens would indicate zones in which the confined aquifer would be protected; In comparison, values of S < 1.0 siemens would indicate zones of probable risks of contamination. © 2006 Sociedade Brasileira de Geofísica.

Sintering of cobalt and strontium doped lanthanum chromite obtained by combustion synthesis

Lanthanum chromite (LaCrO3) is one of the most adequate materials for use as interconnector in solid oxide fuel cell (SOFC) applications, due to its intrinsic properties, namely its good electrical conductivity and resistance to environment conditions in fuel cell operations. Due to difficulties in sintering, additives are usually added to help in the densification process. In this work, the influence of added cobalt and strontium, in the sintering of LaCrO3 obtained by combustion synthesis was studied. The starting materials were respectively nitrates of chromium, lanthanum, cobalt and strontium, and urea was used as fuel. The results show that by increasing the strontium and cobalt concentrations it is possible to reduce the temperature of sintering. Using both additives, the sintering processes took place in lesser times than normally used for this material, as well as greater values of density were attained.

Composition of stingless bee honey: Setting quality standards

Compositional data from 152 stingless bee (Meliponini) honey samples were compiled from studies since 1964, and evaluated to propose a quality standard for this product. Since stingless bee honey has a different composition than Apis mellifera honey, some physicochemical parameters are presented according to stingless bee species. The entomological origin of the honey was known for 17 species of Meliponini from Brazil, one from Costa Rica, six from Mexico, 27 from Panama, one from Surinam, two from Trinidad & Tobago, and seven from Venezuela, most from the genus Melipona. The results varied as follows: moisture (19.9-41.9g/100g), pH (3.15-4.66), free acidity (5.9-109.0meq/Kg), ash (0.01-1.18g/100g), diastase activity (0.9-23.0DN), electrical conductivity (0.49-8.77mS/cm), HMF (0.4-78.4mg/Kg), invertase activity (19.8-90.1IU), nitrogen (14.34-144.00mg/100g), reducing sugars (58.0-75.7g/100g) and sucrose (1.1-4.8g/100g). Moisture content of stingless bee honey is generally higher than the 20% maximum established for A. mellifera honey. Guidelines for further contributions would help make the physicochemical database of meliponine honey more objective, in order to use such data to set quality standards. Pollen analysis should be directed towards the recognition of unifloral honeys produced by stingless bees, in order to obtain standard products from botanical species. A honey quality control campaign directed to both stingless beekeepers and stingless bee honey hunters is needed, as is harmonization of analytical methods. © 2007 Asociación Interciencia.

Produção de frutos de pimentão em diferentes concentrações salinas

An experiment with an Elisa hybrid sweet pepper (Capsicum annuum L) crop using fertirrigation system was carried out in greenhouse. The aim of this study was to evaluate the quantitative effects of an increasing soil saline concentration on the production. The saline concentration was changed by the variation of the KC1 and Ca 2NO 3 concentration in order to obtain high soil electrical conductivity (EC) values. Standard fertigation system (1.5 dS m -1) values were used as control parameters. Besides that, the possibility of saline stress attenuation by applying organic material into the soil was studied. It was observed that the EC levels used in the crop were inversely correlated to the fructification index and the fruit mean weight. Under the most severe treatment (6.0 dS m -1) the fruit mean weight was reduced up to 58% and the mean produced fiuit number per plant was also reduced up to 55%, when compared to the obtained results under controlled conditions. These results demonstrated that the EC variation in the soil solution had strong interference on th production parameters selected for the studies.

Qualidade da água utilizada para irrigação de hortaliças na região de Botucatu-SP

This work had as objective verifies the water quality used for irrigation by the vegetables producers of Botucatu-SP area. They were interviewed 27 producers that sell vegetables in the street markets of Botucatu. Among these producers, ten were selected, being one of each place. Three samples of water of each source were collected. The main standard to evaluate the obtained results were the CONAMA Resolution (National Environment Council) N° 357, March 17, 2005, that it establishes the standard for water classification. The Electric Conductivity was evaluated of agreement value suggested by CETESB and the color was verified according to OMS (Health World Organization), for potable water due to CONAMA Resolution not to stipulate a value for classification. For the public health, just the coliformes and nitrate are the preoccupying variables for they be related with the incidence of diseases, so, the analyzed waters, 40% of them (A, F, H and J producers) offer some risk for the health of Botucatu population, second established standard for CONAMA. We can to conclude that in a general way, those waters, are in conditions no alarming, because they don't present values very different from those established by the legislation.

Correção da sodicidade de dois solos irrigados em resposta à aplicação de gesso agrícola

The chemical and physical degradation of the soils by salinity and sodicity problems constitutes a serious obstacle in productive irrigated areas in arid and semi-add regions. In order to eval mate the effect of gypsum on electrical conductivity, pH, exchangeable sodium percentage, sodium, calcium and magnesium content in saturation extract and exchangeable sodium of two saline-sodic soils: one from irrigated Perimeter Engenheiro Arco Verde in the municipality of Condado and another from irrigated Perimeter of São Gonçalo, in the municipality of Sousa both in the Paraiba State Brazil, an experiment was carried out in green house of the Departamento de Solos e Engenharia Rural, Centro de Ciências Agrárias, Universidade Federal da Paraíba, Areia, Brazil, in a factorial design 2 × 5 referring the two soils and five gypsum levels equivalent to 0; 3.2; 6.3; 9.4 and 12.5 g kg-1 to each soil. The gypsum application exercised positive effects on reduction of salinity and sodicity. The values of electrical conductivity, exchangeable sodium percentage, pH and contents of soluble and exchangeable sodium in relation to data of the soils before application of treatments with gypsum in both the soils were found to decrease.

Preparation and characterization of castor oil-based polyurethane/poly(o- methoxyaniline) blend film

Blends made up of castor oil-based polyurethane (PU) and poly(o-methoxyaniline) (POMA) were obtained in the form of films by casting and characterized by FTIR, UV-Vis-NIR spectroscopy, and electrical conductivity measurements. Doping was carried out by immersing the films in 1.0M HCl aqueous solution. Chemical bonds between NCO group of PU and NH group of POMA were observed by means of FTIR spectra. The UV-Vis-NIR spectra indicated that the presence of the PU in the blend does not affect doping and formation of the POMA phase. The electrical conductivity research was in the range of 10-3 S/cm. © 2007 Wiley Periodicals, Inc.

Development of a new TDR probe for determining soil water content and dry density

A few traditional methods for determining water content in the field are either inaccurate or time consuming. As an alternative, the time domain reflectometry (TDR) technology has been used in the determination of the soil water content for geotechnical applications. This paper presents the preliminary results on the development of a new TDR probe for determining soil water content and dry density at different depths. This new probe is intended to be pushed into the ground using piezocone equipment. Different from the standard TDR probes with straight rods, the new probe consists of two parallel copper stripes coiled around a PVC-steel core. The probe diameter is the same as the standard 10 cm2 piezocone diameter. Through laboratory calibrations, it is possible to establish expressions relating the soil apparent dielectric constant and the bulk electrical conductivity with the gravimetric water content and the dry density. Copyright ASCE 2007.

Policultivo do camarão de água doce Macrobrachium amazonicum (Heller, 1862) com a Tilápia do Nilo (Oreochromis niloticus) alimentadas com rações peletizada e farelada

The objective of this work was to evaluate the influence of fresh water shrimp Macrobrachium amazonicum (Heller, 1862) in performance of Nile tilapia (Oreochromis niloticus) cultivated in polyculture system and feeding with ration pelleted and mashed. The work was realized in Centro de Pesquisa em Aqüicultura Ambiental-CPAA/IAP - Toledo/PR during 37 days. Were utilized like experimental unit 16 ponds excavated, covered with concrete but with bottom of soil with dimension the 4 x 3 m and useful volume the 3,5 m 3. Were utilized 30 tilapias e 150 shrimps for experimental unit distributed at an entirely randomized design with 4 treatments and 4 replications, where TF: tilapia feeding with ration mashed; TCF: tilapia and shrimp feeding with ration mashed; TP: tilapia feeding with ration pelleted; TCP: tilapia and shrimp feeding with ration pelleted. The density used were the 2,6 fishes/m 2 with medium initial weight the 5,58 ± 0,10 g and initial length the 5,56 cm, and the density of shrimp was the 13 shrimps/m 2 with initial length the 1,04 cm. The temperature was gauged daily, while the variables dissolved oxygen, pH and electrical conductivity, weekly. The quantity of ration supplied was the 10% of total biomass of fishes, with feed frequency the 4 times a day, being corrected weekly in function of the biometry. During the experimental period the medium values of temperature, dissolved oxygen, pH and electrical conductivity of the ponds water were 23,42 ± 0,83°C, 5,32 ± 0,52 mg/L, 7,02 ± 0,39, e 100,96 ± 1,81 μS/ cm respectively. Won't registering any influence of shrimp during the cultivation and the ration pelleted provide the better conversion alimentary and performance of tilapias.

Testes de vigor para avaliação da qualidade fisiológica de sementesde Sebastiania commersoniana (Baill.) Smith & Downs.

The objective of this work was to evaluate the efficiency of different vigor tests to assess S. commersoniana seeds physiological quality during storage. Therefore, seeds were stored in cloth bags, plastic bags and glass containers for 531 days, both at room temperature and in a cold chamber. Periodically samples were taken and the following tests were conducted: standard germination, germination speed index, first count after germination, seedlings fresh and dry matter, electrical conductivity (imbibitions for 2 and 24 hours) and accelerated aging, in order to monitoring the seeds physiologic quality. Data were submitted to polynomial regression analysis, for each of the combination of packaging/storage condition. The results obtained led to the following considerations: a) the speed germination index and the accelerated aging test permitted a good evaluation of the seed-lots quality; b) the first count of germination did not allow any prediction about seed lots vigor; c) seedling fresh and dry matter did not discriminate among seed lots; d) electrical conductivity test after 2 h imbibitions was not adequate to evaluate the seed lots vigor and e) the electric conductivity test with 24 h imbibitions was more adequate to differentiate among seed lots, but with little efficiency to discriminate among seed lots with intermediate vigor or with low quality differences.

Qualidade da água para irrigação na microbacia do Coqueiro, Estado de São Paulo

The aim of this study was to evaluate the physico chemical characteristics of water quality for irrigation purposes in the micro basin of Coqueiro, a tributary on the right bank of the São José dos Dourados river, located between the municipalities of Jales, São Francisco, Palmeira d'Oeste and Dirce Reis, in the state of São Paulo, Brazil. Water samples were collected at five geo-referenced points along the stocam and analysed monthly for one year. The parameters analysed were: suspended and dissolved solids, turbidity, electrical conductivity, pH, calcium, magnesium, hardness and total iron. The result showed that the physico chemical parameters had the classification of medium potential for damage to the irrigation system, except total iron, which was classified as having medium to high potential for damage by clogging for localized irrigation systems.

Potential use of the veris apparent EC sensor to predict soil texture under the semi-arid conditions of central Arizona

The operational details of the apparent electrical conductivity (ECa) sensor manufactured by Veris Technologies have been extensively documented in literature reports, but the geographical distribution of these research studies indicate a strong regional concentration in the US Mid-west and Southern states. The agricultural lands of these states diverge significantly to the soil conditions and water regime of irrigated land in the US South-western states such as Arizona where there is no previous research reports of the use of this particular sensor. The objectives of the present study were to analyze the performance of this sensor under the conditions of typical soils in irrigated farms of Central Arizona. We tested under static conditions the performance of the sensor on three soils of contrasting texture. Observations were collected as time series data as soil moisture changed from saturation to permanent wilting point. Observations were repeated at the hours of lowest and highest temperatures. In addition, this study included soil penetration resistance and salinity determinations. Preliminary results indicate that soil temperature of the upper layer caused the most dynamic change in the sensor output. The ECa curves of the three soil textures tested had well defined distinctive characteristics. Final multivariate analysis is pending.

Condições hidrológicas de uma bacia hidrográfica com diferentes usos do solo na região de taquaritinga, SP

In areas where human activities, as agriculture, are developed land use contributes to physical, chemical and biological characteristics of water. This study aimed to identify physical and chemical variations of the water monitoring network in 4 first magnitude watersheds with different land use/occupation in the hydrographic basin of the Glori Farm Creek in the city of Taquaritinga, State of Sao Paulo, from February to July, 2005. The methodology consisted of weekly sample water collections to naalyze turbidity, temperature, dissolved oxygen, pH and electric conductivity. The characterization of the hydrological conditions of the watersheds showed that agricultural activities, including the productive system of the sugarcane cultivation, have affected the quality of water resources.

Qualidade fisiológica e sanitária de sementes de mamona submetidas a diferentes tratamentos químicos

The use of fungicides for treating seeds has become an essential measure in the control of pathogens. However, the effectiveness of many products is not well-known to some crops. The objective of this research was to evaluate the effect of different doses of carbendazin and carboxin + thiram fungicides for controlling pathogens and their interference on the physiologic quality of castor bean seeds. The test consisted of the following treatments (g i.a./100 kg of seeds): carbendazin (15, 30, and 60), carboxin + thiram (25 + 25, 50 + 50, and 100 + 100), formol 0.15% (v/v), and control (distilled water). The physiologic quality of the seeds was determined by germination, first counting, field emergence, speed emergence index, length, fresh and dry weight of the aerial part, and electrical conductivity. There were no statistical differences for germination and fresh and dry matter index. The treatment with formol provided lower values for first counting and field emergence. Seeds treated with fungicides presented higher values for electrical conductivity, but did not differ, statistically, among themselves. The fungi Cladosporium spp.; Bipolaris spp.; Curvularia spp.; Aspergillus flavus; Aspergillus niger; Rhizopus sp.; Penicillium sp.; Rhizoctonia sp.; Verticillium sp.; Fusarium sp.;Arthrobotrys sp.; and Epicocum sp. were identified. All tested products, independently of the dose, provided efficient control for pathogens.

Rietveld analyses and piezoelectric properties of niobium doped bismuth titanate systems

Bi 4Ti 3- xNbxO 12 (BITNb) samples, with × ranging from 0 to 0.40 were obtained using a polymeric precursor solution. Rietveld analyses confirmed that the powders crystallize in an orthorhombic structure free of secondary phases with space group Fmmm. Raman analysis evidenced a sharp increase in the bands intensity located at 129 cm -1 and 190 cm -1 due the lattice distortion in BIT02Nb and BIT04Nb compositions. UV-vis spectra indicated that addition of niobium causes a reduction of defects in the BIT lattice due the suppression of oxygen vacancies located at BO-6 octahedral. Size and morphology of particles as well as electrical behavior of BIT ceramics were affected by addition of donor dopant. Polarization reversal was investigated by applying dc voltage through a conductive tip during the area scanning and was investigated by piezoresponse force microscopy (PFM). PFM measurements revealed a decrease in piezoelectric response with increasing Nb concentration originating from a reduced polarizability along the a-axis. High spontaneous polarization is noted for the less doped sample due the reduction of strain energy and pin charged defects after niobium addition. Copyright © 2010 American Scientific Publishers.