Identification of the dominant translation start site in the attB1 sequence of the pET-DEST42 Gateway vector

Gateway technology is a powerful system for converting a single entry vector into a wide variety of expression vectors. We expressed recombinant influenza matrix protein M1 (FMP), a potent antigen for cytotoxic T cells, using the Gateway vector pET-DEST42 containing the FMP cDNA, and purified the expressed FMP as a single 32 kDa recombinant protein. N-terminal and internal protein sequencing, however, showed that the recombinant FMP contained an extra 10 amino acids fused to the N-terminal of native FMP. Further investigation of the DNA sequence adjacent to the 5'-FMP cDNA indicated that the TTG in the attB1 site (30bp upstream of the ATG in the 5'-FMP cDNA) behaved as a dominant translation start site, resulting in a 10 amino acid extension of the recombinant FMP. Thus, it is possible that recombinant proteins produced by this Gateway vector contain unexpected vector-derived peptides, which may affect experimental outcomes. (c) 2006 Elsevier Inc. All rights reserved.

Effect of over-doped yttrium on the microstructure, mechanical properties and thermal properties of a Zr-based metallic glass

The effects of over-doped yttrium on the microstructure, mechanical properties and thermal behaviour of an oxygen-contaminated Zr51Cu20.7Ni12Al16.3 bulk metallic glass are studied systematically. It has been found that, when yttrium doping is beyond the optimum doping, the glass-forming ability enhancement effect induced by yttrium addition decreases and the mechanical properties are adversely affected. In this study, a new phase with an orthorhombic structure (a = 0.69 nm, b = 0.75 nm and c = 0.74 nm) is identified in the yttrium over-doped alloys. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Improving the economic decision making capability and viability of Chinese wool textile mills

The successful restructuring of Chinese industries is of immense importance not only for the continued development of China but also to the stability of the world economy. The transformation of the Chinese wool textile industry illustrates well the many problems and pressures currently facing most Chinese industries. The Chinese wool textile industry has undergone major upheaval and restructuring in its drive to modernize and take advantage of developments in world textile markets. Macro level ownership and administrative reforms are well advanced as is the uptake of new technology and equipment. However, the changing market and institutional environment also demands an increasing level of sophistication in mill management decisions including product selection, input procurement, product pricing, investment appraisal, cost analysis and proactive identification of new market and growth opportunities. This paper outlines a series of analyses that have been integrated into a decision-making model designed to assist mill managers with these decisions. Features of the model include a whole-of-mill approach, a design based on existing mill structures and information systems, and the capacity for the model to be tailored to individual mills. All of these features facilitate the adoption of the model by time and resource constrained managers seeking to maintain the viability of their enterprises in the face of extremely dynamic market conditions.

Isolation, characterization and discovery of new alleles of sHsp genes in durum wheat (Triticum durum Desf.)

Gli organismi vegetali mostrano una notevole capacità di adattamento alle condizioni di stress e lo studio delle componenti molecolari alla base dell'adattamento in colture cerealicole di interesse alimentare, come il frumento, è di particolare interesse per lo studio di varietà che consentano una buona produzione con basso input anche in condizioni ambientali non ottimali. L'esposizione delle colture cerealicole a stress termico durante determinate fasi del ciclo vitale influisce negativamente sulla resa e sulla qualità, a questo fine è necessario chiarire le basi genetiche e molecolari della termotolleranza per identificare geni e alleli vantaggiosi da impiegare in programmi di incrocio volti al miglioramento genetico. Numerosi studi dimostrano il coinvolgimento delle sHSP a localizzazione cloroplastica (in frumento sHSP26) nel meccanismo di acquisizione della termotolleranza e la loro interazione con diverse componenti del fotosistema II (PSII) che determinerebbe un’azione protettiva in condizioni di stress termico e altri tipi di stress. Lo scopo del progetto è quello di caratterizzare in frumento duro nuove varianti alleliche correlate alla tolleranza a stress termico mediate l'utilizzo del TILLING (Target Induced Local Lesion In Genome), un approccio di genetica inversa che prevede la mutagenesi e l'identificazione delle mutazioni indotte in siti di interesse. Durante la tesi sono state isolate e caratterizzate 3 sequenze geniche complete per smallHsp26 denominate TdHsp26-A1; TdHsp26-A2; TdHsp26-B1 e un putativo pseudogene denominato TdHsp26-A3. I geni isolati sono stati usati come target in analisi di TILLING in due popolazioni di frumento duro mutagenizzate con EMS (EtilMetanoSulfonato). Nel nostro studio sono stati impiegati due differenti approcci di TILLING: un approccio di TILLING classico mediante screening con High Resolution Melting (HRM) e un approccio innovativo che sfrutta un database di TILLING recentemente sviluppato. La popolazione di mutanti cv. Kronos è stata analizzata per la presenza di mutazioni in tutti e tre i geni individuati mediante ricerca online nel database di TILLING, il quale sfrutta la tecnica dell’exome capture sulla popolazione di TILLING seguito da sequenziamento ad alta processività. Attraverso questa tecnica sono state individuate, nella popolazione mutagenizzata di frumento duro cv. Kronos, 36 linee recanti mutazioni missenso. Contemporaneamente lo screening con HRM, effettuato su 960 genotipi della libreria di TILLING di frumento duro cv. Cham1 ha consentito di individuare mutazioni in una regione di 211bp di interesse funzionale del gene TdHsp26-B1, tra le quali 3 linee mutanti recanti mutazioni missenso in omozigosi. Alcune mutazioni missenso individuate sui due geni TdHsp26-A1 e TdHsp26-B1 sono state confermate in vivo nelle piante delle rispettive linee mutanti generando marcatori codominanti KASP (Kompetitive Allele Specific PCR) con cui è stato possibile verificare anche il grado di zigosità di tali mutazioni. Al fine di ridurre il numero di mutazioni non desiderate nelle linee risultate più interessanti, è stato eseguito il re-incrocio dei mutanti con i relativi parentali wild type ed inoltre sono stati generati alcuni doppi mutanti che consentiranno di comprendere meglio i meccanismi molecolari presieduti da questa classe genica. Gli individui F1 degli incroci sono stati poi genotipizzati con i medesimi marcatori KASP specifici per la mutazione di interesse per verificare la buona riuscita dell’incrocio. Questo approccio ha permesso di individuare ed implementare risorse genetiche utili ad intraprendere studi funzionali relativi al ruolo di smallHSP plastidiche implicate nella acquisizione di termotolleranza in frumento duro e di generare marcatori potenzialmente utili in futuri programmi di breeding.

Sustainable competitive advantage in electronic business: towards a contingency perspective of the resource-based view

Our understanding of the nature of competitive advantage has not been helped by a tendency for theorists to adopt a unitary position, suggesting, for example, that advantage is industry based or resource based. In examining the nature of competitive advantage in an electronic business (e-business) environment this paper adopts a contingency perspective. Several intriguing questions emerge. Do 'new economy' companies have different resource profiles to 'old economy' companies? Are the patterns of resource development and accumulation different? Are attained advantages less sustainable for e-businesses? These are the kinds of themes examined in this paper. The literature on competitive advantage is reviewed as are the challenges posed by the recent changes in the business environment.Two broad sets of firms are identified as emerging out of the e-business shake up and the resource profiles of these firms are discussed. Several research propositions are advanced and the implications for research and practice are discussed.

Techno-economic security aspects of transferring technology to China:the perspective of Danish companies

Danish companies are especially prevalent in China where they have found opportunities to exploit their niche position in a number of specialised product areas. As a result, their operations are often well advanced in terms of the levels of technology transferred and the extent of transfer. Transferring technology brings with it risks as well as benefits. Its absorption and dissemination can, in the longer term, bring about new competitors unless measures are taken to prevent leakage of know-how or the technology supplier can stay ahead of the technological race. This paper draws on data from three Danish case companies that are transferring technology to China. The cases are examined within a framework that allows the identification of the companies’ motivations for transfer against their awareness of the techno-economic security issues. In this way it is possible to highlight the strategic and operational approaches that can be taken to obviate the risks involved.

A conceptual analysis of m-technology as a medium towards e-governance society in emerging countries

This paper shows how mobile phone technology can influence the development of egovernance in emerging countries. We evaluate the conditions under which consumers really engage with m-services. We argue that the lower cost of m-infrastructure is more appropriate than the Internet-based structure that prevents large part of the population access to ICT. However, m-technology should not be separated from the Internet but be integrated allowing emerging country to leap frog the technological cycle.

Perception of concurrent sentences with harmonic or frequency-shifted voiced excitation:performance of human listeners and of computational models based on autocorrelation

Keyword identification in one of two simultaneous sentences is improved when the sentences differ in F0, particularly when they are almost continuously voiced. Sentences of this kind were recorded, monotonised using PSOLA, and re-synthesised to give a range of harmonic ?F0s (0, 1, 3, and 10 semitones). They were additionally re-synthesised by LPC with the LPC residual frequency shifted by 25% of F0, to give excitation with inharmonic but regularly spaced components. Perceptual identification of frequency-shifted sentences showed a similar large improvement with nominal ?F0 as seen for harmonic sentences, although overall performance was about 10% poorer. We compared performance with that of two autocorrelation-based computational models comprising four stages: (i) peripheral frequency selectivity and half-wave rectification; (ii) within-channel periodicity extraction; (iii) identification of the two major peaks in the summary autocorrelation function (SACF); (iv) a template-based approach to speech recognition using dynamic time warping. One model sampled the correlogram at the target-F0 period and performed spectral matching; the other deselected channels dominated by the interferer and performed matching on the short-lag portion of the residual SACF. Both models reproduced the monotonic increase observed in human performance with increasing ?F0 for the harmonic stimuli, but not for the frequency-shifted stimuli. A revised version of the spectral-matching model, which groups patterns of periodicity that lie on a curve in the frequency-delay plane, showed a closer match to the perceptual data for frequency-shifted sentences. The results extend the range of phenomena originally attributed to harmonic processing to grouping by common spectral pattern.

Optimizing supply chain waste management through the use of RFID technology

This paper presents a Decision Support System framework based on Constrain Logic Programming and offers suggestions for using RFID technology to improve several of the critical procedures involved. This paper suggests that a widely distributed and semi-structured network of waste producing and waste collecting/processing enterprises can improve their planning both by the proposed Decision Support System, but also by implementing RFID technology to update and validate information in a continuous manner. © 2010 IEEE.

Cost and performance analysis of new wood-fuelled power plant concepts

The objective of the thesis was to analyse several process configurations for the production of electricity from biomass. Process simulation models using AspenPlus aimed at calculating the industrial performance of power plant concepts were built, tested, and used for analysis. The criteria used in analysis were performance and cost. All of the advanced systems appear to have higher efficiencies than the commercial reference, the Rankine cycle. However, advanced systems typically have a higher cost of electricity (COE) than the Rankine power plant. High efficiencies do not reduce fuel costs enough to compensate for the high capital costs of advanced concepts. The successful reduction of capital costs would appear to be the key to the introduction of the new systems. Capital costs account for a considerable, often dominant, part of the cost of electricity in these concepts. All of the systems have higher specific investment costs than the conventional industrial alternative, i.e. the Rankine power plant; Combined beat and power production (CUP) is currently the only industrial area of application in which bio-power costs can be considerably reduced to make them competitive. Based on the results of this work, AsperiPlus is an appropriate simulation platform. How-ever, the usefulness of the models could be improved if a number of unit operations were modelled in greater detail. The dryer, gasifier, fast pyrolysis, gas engine and gas turbine models could be improved.

Antecedents and consequences of new product development and international new product rollout timeliness:an examination of mediating and moderating influences

The study examined the relationships between antecedents, timeliness in NPD and INPR, and consequences. A conceptual framework was tested using 232 new products from South Korean firms. The hypothesized relationships among the constructs in the model were evaluated by multiple regression and hierarchal regression analyses using SPSS 12 as well as by structural equation modelling (SEM) using SIMPLIS LISREL. In addition, confirmatory factor analysis (CFA) was carried out using SIMPLIS LISREL. In the direct relationships, cross-functional linkages and marketing synergy exhibited a statistically significant effect on NPD timeliness. The results also supported the influences of the HQ-subsidiary/agent relationship and NPD timeliness on INPR timeliness as well as INPR timeliness on performance. In the mediating effect tests, marketing proficiency significantly accounts for the relationships between cross-functional linkages and NPD timeliness, between marketing synergy and NPD timeliness, and between the HQ-subsidiary/agent relationship and INPR timeliness. Technical proficiency also mediates the effect of the HQ-subsidiary/agent relationship on INPR timeliness. The influence of NPD timeliness on new product performance in target markets is attributed to INPR timeliness. As for the results of the external environmentals and standardization influences, competitive intensity moderates the relationship between NPD timeliness and new product performance. Technology change also moderates the relationship between cross-functional linkages and NPD timeliness and between timeliness in NPD and INPR and performance. Standardization has a moderating role on the relationship between NPD timeliness and INPR timeliness. This study presents the answers to research questions which concern what factors are predictors of criterion variables, how antecedents influence timeliness in NPD and INPR and when the direct relationships in the INPR process are strengthened.

Implementation of optical chemsensors based on HF-etched fibre Bragg grating structures

High-sensitivity optical chemsensors have been implemented by exploiting fibre Bragg grating structures UV-inscribed in D-shape, single-mode and multimode fibres and post-sensitized by hydrofluoric acid (HF) etching treatment. We have demonstrated that the Bragg grating structures which are intrinsically insensitive to chemicals can be sensitized by effective etching. All etched devices possess refractive index sensing capability that offers an encoding function to chemical concentrations. Most etched devices have been used to measure the concentrations of sugar solutions, showing a potential capability of detecting concentration changes as small as 0.1–0.5%.

A study of new product market search and user adoption

The research was carried out in the Aviation Division of Dunlop Limited and was initiated as a search for more diverse uses for carbon/carbon composites. An assumed communication model of adoption was refined by introducing the concept of a two way search after making cross industry comparisons of supplier and consumer behaviour. This research has examined methods of searching for new uses for advanced technology materials. Two broad approaches were adopted. First, a case history approach investigated materials that had been in a similar oosition to carbon/carbon to see how other material producing firms had tackled the problem. Second, a questionnaire survey among industrialists examined: the role and identity of material decision makers in different sized firms; the effectiveness of various information sources and channels; and the material adoption habits of different industries. The effectiveness of selected information channels was further studied by monitoring the response to publicity given to carbon/carbon. A flow chart has been developed from the results of this research which should help any material producing firm that is contemplating the introduction of a new material to the world market. Further benefit to our understanding of the innovation and adoption of new materials would accrue from work in the followino areas: "micro" type case histories; understanding more fully the role of product champions or promoters; investigating the phase difference between incremental and radical type innovations for materials; examining the relationship between the adoption rate of new materials and the advance of technology; studying the development of cost per unit function methods for material selection; and reviewing the benefits that economy of scale studies can have on material developments. These are all suggested areas for further work.