Canine cerebral leishmaniasis: Potential role of matrix metalloproteinase-2 in the development of neurological disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Protective Effect of HLA-DRB1*11 and Predisposition of HLA-C*04 in the Development of Severe Liver Damage in Brazilian Patients with Chronic Hepatitis C Virus Infection

The objective of this study was to investigate human leucocyte antigen (HLA) genes in patients chronically infected with hepatitis C virus (HCV) and to analyse the possible role of these genes in the progression of chronic hepatitis C. One hundred and forty-five (145) Brazilian patients infected only with HCV genotype 1 were evaluated. HLA class I (A*, B*, C*) and class II (DRB1*, DQA1*, DQB1*) typing were carried out by PCR-SSO, through Luminex technology. Associations were found with protection against development of liver damage by both DRB1*11 (5.0% versus 18.2%, P = 0.0016, OR = 0.23, CI 95% = 0.090.58; Pc=0.0208) and DRB1*11-DQA1*05-DQB1*03 haplotype (4.2% versus 15.3%, P = 0.0032; OR = 0.24, CI 95% = 0.08-0.64). Liver damage was associated with HLA-C*04 in patients with <20 years of infection (38.4% versus 9.1%, P = 0.002, OR = 6.25, CI 95% = 1.9719.7; Pc=0.0238). It is concluded that HLA alleles can influence the development of liver damage in HCV type-1 chronically infected Brazilian patients.

Observations on the development of the febrile response to pyrogen in newborn pigs

The febrile response of newborn pigs to exogenous pyrogen injection was investigated. Lipopolysacharides (LPS, E coli) were injected intravenously into the superior vena cava of 1-30-day-old piglets. All the experiments were carried out in littermates half of which were injected with pyrogen and half with pyrogen-free saline. Newborn pigs did not develop a febrile response from 1 to 4 days of age; however, when the animals were 5 days old exogenous pyrogen determined a typical monophasic febrile response. A second intravenous injection of pyrogen into newborn pigs (1 day old) 24 h after the first did not raise body temperature. It is suggested that newborn pigs behave like the newborn of other mammalian species regarding endotoxin-induced thermogenesis.

The development of a febrile response to pyrogen in the thyroid-deficient rabbit

The development of the febrile response to E. coli lipopolysaccharide (1.5 μg/kg, i.v.) in thyroid-deficient rabbits has been studied. Twenty-eight New Zealand White rabbits weighing 2.1-2.3 kg were used. Hypothyroidism was induced by treatment with propylthiouracil (100 or 200 mg/kg body wt./15 days). Thyroid-deficient animals showed a reduction in the febrile response to lipopolysaccharide, but the effect was significantly different (p<0.01) from the control only for rabbits treated with 200 mg/kg of propylthiouracil. Propranolol (2 mg/kg, i.p.) given 30 min before lipopolysaccharide also reduced (p<0.01) the fever response in control rabbits. The results of this experiment are consistent with the hypothesis that the reduction in the febrile response of thyroid-deficient rabbits is due to the reduced number of β-adrenergic receptors, or to a change in the availability of neurotransmitter in thermogenically active tissues, such as brown fat.

On the development of the electrochemical potentiokinetic method

The development of electrochemical potentiokinetic methods as applied to the testing of metals and alloys is followed from its early phases up to its latest advances relating to intergranular corrosion, SCC and pitting corrosion tests of stainless steels and special alloys and to the examination of their structure and properties. In assessing the susceptibility to intergranular and pitting corrosion by potentiokinetic polarization tests, the polarization curves which apply to the bulk of the alloy grains (the matrix) must be distinguished from those pertaining to grain boundaries. Cyclic polarization measurements such as the electrochemical potentiokinetic reactivation (EPR) test make it possible to derive the alloy's susceptibility to intergranular, pitting and crevice corrosion from characteristic potentials and other quantities determined in the 'double loop' test. EPR is rapid and responds to the combined effects of a number of factors that influence the properties of materials. The electrochemical p otentiokinetic tests are sensitive enough to detect structural changes in heat treated materials ranging far beyond the stainless steels alone, and can be used for non-destructive testing aimed at elucidating the properties and behavior of materials. © 2001 Elsevier Science Ltd. All rights reserved.

Effect of substrata on the development of stem cuttings of Lippia alba (Mill.) N. E. BR. - Limonene-carvone chemotype

Studies were conducted to show the effect of different substrata on the development of stem cuttings of Lippia alba made of limonene-carvone chemotype. The experiment was done in the College of Agronomical Sciences, UNESP, Botucatu, SP, Brazil in 2000. The cuttings were planted in polystyrene trays consisting of 72 cells. The cuttings had about 0.20 m of length and were put in the following substrata: Fine sand (T1), commercial substratum (T2), carbonised rice peel and local soil (T3), local soil, cow manure and carbonised rice peel (T4), vermiculite (T5), and carbonised rice peel (T6). After 40 days the development of stem cuttings were evaluated. High rate of rooting of stem cuttings was verified, with average of 95% and no significant difference between the treatments. In relation to dry mass of aerial parts and dry mass of roots, significant differences were found. For dry mass production of aerial parts the commercial substratum (T2) and the local soil, cow manure, carbonised rice peel (T4) were optimal. For mass of roots the local soil, cow manure, carbonised rice peel (T4) proved to be the best.

Evaluation of the development of Fafia - Pfaffia glomerata (Spreng.) Pedersen

The aim of this experiment is to evaluate the development in height of the plants of four accessions (2 from Parana - accession 1 and 2, one from São Paulo - accession 3, and one from Mato Grosso do Sul State- accession 4). The experimental design was made of randomized blocks, with four treatments (accessions) and four replications. In each plot were planted 24 seedlings. Five evaluations of the height were accomplished, with an interval of two months, starting from the second month after the planting of the seedlings. The results show a significant difference between accession 4 and other three accessions in first evaluation (141.42 % higher than accession 2, the lowest of three and 44.16 % higher than accession 3, the highest of three), demonstrating a higher vigour of this accession on initial stage of its development. In the second and third evaluation, all accessions have no statistical difference, demonstrating a similar level of development at intermedial stages of development. At 5 th evaluation, all accessions have almost the same result, with no statistical difference among them. This is a clear result of similar level of development of this species in these accessions, representing a stabilization of their height development at the end of first year. We concluded that fáfia possesses a strong initial growth, with visible difference among the accessions in the first months. From the eight month on, we observed a slight decrease in the height. This suggests the end of annual cycle.

Combined use of modeling techniques for the development of the conceptual model in simulation projects

The objective of this paper is to utilize the SIPOC, flowchart and IDEF0 modeling techniques combined to elaborate the conceptual model of a simulation project. It is intended to identify the contribution of these techniques in the elaboration of the computational model. To illustrate such application, a practical case of a high-end technology enterprise is presented. The paper concludes that the proposed approach eases the elaboration of the computational model. © 2008 IEEE.

ECLAC Development of official statistics in the region. Report of the Economic Commission for Latin America and the Caribbean on the development of official statistics in Latin America and the Caribbean

This document was prepared by the Economic Commission for Latin America and the Caribbean (ECLAC); and offers a description of the main trends in the development of official statistics in Latin America and the Caribbean and the principal challenges in that regard.The first chapter provides an analysis of the state of development of statistical production in the region, based on statistical information for 41 Latin American and Caribbean countries and eight specific areas. The institutional organization of national statistical systems in the region is also described. Chapter II examines the history and current status of mechanisms for regional and subregional coordination and of the Statistical Conference of the Americas of ECLAC. Chapter III describes the main challenges for official statistics in the countries of the region and the strategies that the Statistical Conference of the Americas and ECLAC propose to implement in order to address them.

The problems of intellectual property in Latin America and how to address them

Includes bibliography

A case study of concurrent engineering application on the development of parts for the white goods industry in Brazil

This classical way to manage product development processes for massive production seems to be changing: high pressure for cost reduction, higher quality standards, markets reaching for innovation lead to the necessity of new tools for development control. Into this, and learning from the automotive and aerospace industries factories from other segments are starting to understand and apply manufacturing and assembly oriented projects to ease the task of generate goods and from this obtain at least a part of the expected results. This paper is intended to demonstrate the applicability of the concepts of Concurrent Engineering and DFM/DFA (Design for Manufacturing and Assembly) in the development of products and parts for the White Goods industry in Brazil (major appliances as refrigerators, cookers and washing machines), showing one case concerning the development and releasing of a component. Finally is demonstrated in a short term how was reached a solution that could provide cost savings and reduction on the time to delivery using those techniques.

Histological outcomes on the development of new space-making devices for maxillary sinus floor augmentation

Background: Previous studies have pointed out that the mere elevation of the maxillary sinus membrane promotes bone formation without the use of augmentation materials. Purpose: This experimental study aimed at evaluating if the two-stage procedure for sinus floor augmentation could benefit from the use of a space-making device in order to increase the bone volume to enable later implant installation with good primary stability. Materials and Methods: Six male tufted capuchin primates (Cebus apella) were subjected to extraction of the three premolars and the first molar on both sides of the maxilla to create an edentulous area. The sinuses were opened using the lateral bone-wall window technique, and the membrane was elevated. One resorbable space-making device was inserted in each maxillary sinus, and the bone window was returned in place. The animals were euthanatized after 6 months, and biopsy blocks containing the whole maxillary sinus and surrounding soft tissues were prepared for ground sections. Results: The histological examination of the specimens showed bone formation in contact with both the schneiderian membrane and the device in most cases even when the device was displaced. The process of bone formation indicates that this technique is potentially useful for two-stage sinus floor augmentation. The lack of stabilization of the device within the sinus demands further improvement of space-makers for predictable bone augmentation. Conclusions: It is concluded that (1) the device used in this study did not trigger any important inflammatory reaction; (2) when the sinus membrane was elevated, bone formation was a constant finding; and (3) an ideal space-making device should be stable and elevate the membrane to ensure a maintained connection between the membrane and the secluded space. © 2009 Wiley Periodicals, Inc.