Maximal power output during incremental cycling test is dependent on the curvature constant of the power-time relationship

The aim of this study was to investigate whether the maximal power output (Pmax) during an incremental test was dependent on the curvature constant (W') of the power-time relationship. Thirty healthy male subjects (maximal oxygen uptake = 3.58 ± 0.40 L·min(-1)) performed a ramp incremental cycling test to determine the maximal oxygen uptake and Pmax, and 4 constant work rate tests to exhaustion to estimate 2 parameters from the modeling of the power-time relationship (i.e., critical power (CP) and W'). Afterwards, the participants were ranked according to their magnitude of W'. The median third was excluded to form a high W' group (HIGH, n = 10), and a low W' group (LOW, n = 10). Maximal oxygen uptake (3.84 ± 0.50 vs. 3.49 ± 0.37 L·min(-1)) and CP (213 ± 22 vs. 200 ± 29 W) were not significantly different between HIGH and LOW, respectively. However, Pmax was significantly greater for the HIGH (337 ± 23 W) than for the LOW (299 ± 40 W). Thus, in physically active individuals with similar aerobic parameters, W' influences the Pmax during incremental testing.

A flow cytometry method for testing the susceptibility of Cryptococcus spp. to amphotericin B

Human fungal infections have increased at an alarming rate in recent years, particularly in immunocompromised individuals. Cryptococcosis is the second most prevalent systemic fungal infection worldwide, and the most prevalent systemic infection in immunocompromised individuals, representing more than 70% of cases. The incidence of cryptococcosis is high in people with HIV/acquired immunodeficiency syndrome (AIDS), with recent estimates indicating that there are one million cases of cryptococcal meningitis globally per year in AIDS patients. The aim of this research was to develop a rapid flow cytometric antifungal susceptibility test and to compare the results with the standard methods. A reference strain and clinical isolates of Cryptococcus neoformans and Cryptococcus gattii were tested for susceptibility to amphotericin B by flow cytometry using propidium iodide as indicator of viability. Flow cytometry (FC) results were compared with the minimum inhibitory concentration (MIC) values determined by microdilution. The antifungal activity of amphotericin B ranged from MICs of 0.06 to 2μg/ml for the 11 isolates studied. The same results were found by FC. The FC method allows same-day results, assisting in the selection of appropriate antifungal therapies. These results demonstrate an excellent correlation between FC and the classic methods of testing for susceptibility to antifungal agents. This rapid diagnosis method makes it possible to quickly administer effective therapeutic interventions, often saving lives.

Perfil de Aglutininas Anti-leptospira e anti-brucella e condições sanitárias de ovinos da região noroeste do Estado de São Paulo, Brasil

The sheep industry has become increasingly prominent in agribusiness, transforming the stage production of Brazil, and thus contributes more to the socio-economic development of the country. The work aimed to verify the occurrence of brucellosis and leptospirosis in sheep from northwestern São Paulo state. In addition to determining the prevalence of major Leptospira in the region and to trace the diagnosis of sheep breeding in this part of the country. All the 1222 sheep serum samples from 49 properties did not react serologically to evidentiary testing for brucellosis, compared to antigens of B. abortus and B. ovis used in the testing of 2-ME and IDGA, respectively. The Microscopic Agglutination Test (MAT) test revealed that 19.14% (232/1212) of samples were positive for one or more serovars, with titles ranging from 100 to 800. The most frequent serovar was hebdomadis in the region, with Sentot and Sherman (18.10%, 11.64% and 8.62%, respectively). By profiling the system of sheep farming in the region, we found that most herds are composed of more than one race being the main purpose is for the court. According to the scheme adopted immunoprophylactics there is a homogeneous set schedule. It adopts the use of anti-helminth, non-prescription veterinary antibiotic. There is also the presence of diarrhea and abortions and the lack of criteria for los ovinos on management, making it the need for emergency development of programs for disease control, schema immunoprophylactics adequate sanitation and hygienic measures in sheep breeding.

Atividade antioxidante do extrato seco de cacau orgânico (Theobroma cacao): estudo de estabilidade e teste de aceitação de cremes acrescidos deste extrato

Conselho Nacional de Desevolvimento Científico e Tecnológico (CNPq)

Application of an auditory steady-state response test to evaluate the attenuation of hearing protection devices

This research aims to present a new method to get real attenuation of hearing protection devices, with good reproducibility and a small standard deviation, without relying on skills and cooperation individual. Thus the authors performed tests in 10 individuals without protection and after with two kinds of ear protections (ear plug and ear muffs), to get the threshold limit value in each of the 3 stages. For this, the research used an electrophysical exam, normally used in speech therapy, named ASSR (auditory steady-state response). The principle of this exam is put on individual’s head 3 electrodes, to capture electrical signs directly in auditory nerve. In summary, the authors presented the final results. The method proposed by ANSI (American National Standards Institute) indicated an attenuation of 27.6 dB for ear plugs, while the value found in this work was 16 dB; and for ear muffs, the ANSI method indicated 29.8 dB while the value found here was 28.5 dB.

RB30-246 Testing Ice Cream for Butterfat

Butterfat is usually the most expensive ingredient of ice cream; hence, great care is necessary in controllng its use. The manufacturer of ice cream, whether doing a large or a small volume of business, must manufacture a product that will comply with the established fat standard. Some means of determining the percentage of butterfat in the product must be available in order to establish this control. This 1930 research bulletin discusses the different testing equipment used to test butterfat in ice cream.

Tuberculin Skin Testing in White-Tailed Deer (Odocoileus virginianus)

The comparative cervical skin test for antemortem diagnosis of tuberculosis was done 169 times on 116 different white-tailed deer of known Mycobacterium bovis infection status. The sensitivity and specificity were 97 and 81%, respectively. The magnitude of change in skin thickness at test sites was not significantly influenced by dosage of inoculum, dissemination of the disease process, or repeated skin testing. However, the magnitude of change in skin thickness was significantly greater in deer infected for less than 109 days than in deer infected for more than 109 days. As used in the present study, the comparative cervical skin test is a sensitive method of antemortem diagnosis of M. bovis infection in white-tailed deer.

Directed Test Suite Augmentation

As software evolves, engineers use regression testing to evaluate its fitness for release. Such testing typically begins with existing test cases, and many techniques have been proposed for reusing these cost-effectively. After reusing test cases, however, it is also important to consider code or behavior that has not been exercised by existing test cases and generate new test cases to validate these. This process is known as test suite augmentation. In this paper we present a directed test suite augmentation technique, that utilizes results from reuse of existing test cases together with an incremental concolic testing algorithm to augment test suites so that they are coverage-adequate for a modified program. We present results of an empirical study examining the effectiveness of our approach.

A Controlled Experiment Assessing Test Case Prioritization Techniques via Mutation Faults

Regression testing is an important part of software maintenance, but it can also be very expensive. To reduce this expense, software testers may prioritize their test cases so that those that are more important are run earlier in the regression testing process. Previous work has shown that prioritization can improve a test suite’s rate of fault detection, but the assessment of prioritization techniques has been limited to hand-seeded faults, primarily due to the belief that such faults are more realistic than automatically generated (mutation) faults. A recent empirical study, however, suggests that mutation faults can be representative of real faults. We have therefore designed and performed a controlled experiment to assess the ability of prioritization techniques to improve the rate of fault detection techniques, measured relative to mutation faults. Our results show that prioritization can be effective relative to the faults considered, and they expose ways in which that effectiveness can vary with characteristics of faults and test suites. We also compare our results to those collected earlier with respect to the relationship between hand-seeded faults and mutation faults, and the implications this has for researchers performing empirical studies of prioritization.

Incorporating Varying Test Costs and Fault Severities into Test Case Prioritization

Test case prioritization techniques schedule test cases for regression testing in an order that increases their ability to meet some performance goal. One performance goal, rate offault detection, measures how quickly faults are detected within the testing process. In previous work we provided a metric, APFD, for measuring rate of fault detection, and techniques for prioritizing test cases to improve APFD, and reported the results of experiments using those techniques. This metric and these techniques, however, applied only in cases in which test costs and fault severity are uniform. In this paper, we present a new metric for assessing the rate of fault detection of prioritized test cases, that incorporates varying test case and fault costs. We present the results of a case study illustrating the application of the metric. This study raises several practical questions that might arise in applying test case prioritization; we discuss how practitioners could go about answering these questions.

MECHANICAL TESTING DEVICE FOR VISCOELASTIC BIOMATERIALS

Nearly all biologic tissues exhibit viscoelastic behavior. This behavior is characterized by hysteresis in the response of the material to load or strain. This information can be utilized in extrapolation of life expectancy of vascular implant materials including native tissues and synthetic materials. This behavior is exhibited in many engineering materials as well such as the polymers PTFE, polyamide, polyethylene, etc. While procedures have been developed for evaluating the engineering polymers the techniques for biologic tissues are not as mature. There are multiple reasons for this. A major one is a cultural divide between the medical and engineering communities. Biomedical engineers are beginning to fill that void. A digitally controlled drivetrain designed to evaluate both elastic and viscoelastic characteristics of biologic tissues has been developed. The initial impetus for the development of this device was to evaluate the potential for human umbilical tissue to serve as a vascular graft material. The consequence is that the load frame is configured for membrane type specimens with rectangular dimensions of no more than 25mm per side. The designed load capacity of the drivetrain is to impose an axial load of 40N on the specimen. This drivetrain is capable of assessing the viscoelastic response of the specimens by four different test modes: stress relaxation, creep, harmonic induced oscillations, and controlled strain rate tests. The fluorocarbon PTFE has mechanical properties commensurate with vascular tissue. In fact, it has been used for vascular grafts in patients who have been victims of various traumas. Hardware and software validation of the device was accomplished by testing PTFE and comparing the results to properties that have been published by both researchers and manufacturers.

Schizophrenia, brain disease and meta-analyses: Integrating the pieces and testing Fusar-Poli`s hypothesis

This paper aims to discuss and test the hypothesis raised by Fusar-Poli [Fusar-Poli P. Can neuroimaging prove that schizophrenia is a brain disease? A radical hypothesis. Medical Hypotheses in press, corrected proof] that ""on the basis of the available imaging literature there is no consistent evidence to reject the radical and provocative hypothesis that schizophrenia is not a brain disease"". To achieve this goal, all meta-analyses on `fMRI and schizophrenia` published during the current decade and indexed in Pubmed were summarized, as much as some other useful information, e.g., meta-analyses on genetic risk factors. Our main conclusion is that the literature fully supports the hypothesis that schizophrenia is a syndrome (not a disease) associated with brain abnormalities, despite the fact that there is no singular and reductionist pathway from the nosographic entity (schizophrenia) to its causes. This irreducibility is due to the fact that the syndrome has more than one dimension (e.g., cognitive, psychotic and negative) and each of them is related to abnormalities in specific neuronal networks. A psychiatric diagnosis is a statistical procedure; these dimensions are not identically represented in each diagnosticated case and this explains the existence of more than one pattern of brain abnormalities related to schizophrenia. For example, chronification is associated with negativism while the first psychotic episode is not; in that sense, the same person living with schizophrenia may reveal different symptoms and fMRI patterns along the course of his life, and this is precisely what defines schizophrenia since the time when it was called Dementia Praecox (first by pick then by Kraepelin). It is notable that 100% of the collected meta-analyses on `fMRI and schizophrenia` reveal positive findings. Moreover, all meta-analyses that found positive associations between schizophrenia and genetic risk factors have to do with genes (SNPs) especially activated in neuronal tissue of the central nervous system (CNS), suggesting that, to the extent these polymorphisms are related to schizophrenia`s etiology, they are also related to abnormal brain activity. (C) 2009 Elsevier Ltd. All rights reserved.

Implementing Human Papillomavirus Testing in a Public Health Hospital: Challenges and Opportunities

Objectives: Robust evidence now supports human papillomavirus (HPV) testing as a more effective option to screening and as more sensitive than cytology in detecting high-grade cervical intraepithelial neoplasia. Our goal was to analyze the performance of the Hybrid Capture II (HC2) assay for high-risk HPV (hrHPV) in women undergoing gynecological examination at a public health hospital as part of the evaluation of HPV screening as an alternative or complement to cytology. Study Design: This analysis is a subset of a cross-sectional study carried out at a large public hospital serving a predominantly low-resource population. A total of 705 women were enrolled; the sensitivity and specificity of each test were estimated and compared. Results: The analysis identified 272 hrHPV-positive women (mean age 36.3 years) and 433 hrHPV-negative women (mean age 41.2 years). HPV testing showed a significantly increased sensitivity of the HC2 assay versus cytology (84.5 vs. 69.7%; p < 0.0001) but a lower specificity (49.90 vs. 88.78%; p < 0.0001). Conclusion: The combination of both methods seems to be useful in improving detection of cervical lesions. Copyright (C) 2012 S. Karger AG, Basel

A comparative study between crack analysis and a mechanical test for assessing the polymerization stress of restorative composites

Objectives. To verify the hypothesis that crack analysis and a mechanical test would rank a series of composites in a similar order with respect to polymerization stress. Also, both tests would show similar relationships between stress and composite elastic modulus and/or shrinkage. Methods. Soda-lime glass discs (2-mm thick) with a central perforation (3.5-mm diameter) received four Vickers indentations 500 mu m from the cavity margin. The indent cracks were measured (500x) prior and 10 min after the cavity was restored with one of six materials (Kalore/KL, Gradia/GR, Ice/IC, Wave/WV, Majesty Flow/MF, and Majesty Posterior/MP). Stresses at the indent site were calculated based on glass fracture toughness and increase in crack length. Stress at the bonded interface was calculated using the equation for an internally pressurized cylinder. The mechanical test used a universal testing machine and glass rods (5-mm diameter) as substrate. An extensometer monitored specimen height (2 mm). Nominal stress was calculated dividing the maximum shrinkage force by the specimen cross-sectional area. Composite elastic modulus was determined by nanoindentation and post-gel shrinkage was measured using strain gages. Data were subjected to one-way ANOVA/Tukey or Kruskal-Wallis/Mann-Whitney tests (alpha: 5%). Results. Both tests grouped the composites in three statistical subsets, with small differences in overlapping between the intermediate subset (MF, WV) and the highest (MP, IC) or the lowest stress materials (KL, GR). Higher stresses were developed by composites with high modulus and/or high shrinkage. Significance. Crack analysis demonstrated to be as effective as the mechanical test to rank composites regarding polymerization stress. (c) 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Testing allele homogeneity: the problem of nested hypotheses

Background: The evaluation of associations between genotypes and diseases in a case-control framework plays an important role in genetic epidemiology. This paper focuses on the evaluation of the homogeneity of both genotypic and allelic frequencies. The traditional test that is used to check allelic homogeneity is known to be valid only under Hardy-Weinberg equilibrium, a property that may not hold in practice. Results: We first describe the flaws of the traditional (chi-squared) tests for both allelic and genotypic homogeneity. Besides the known problem of the allelic procedure, we show that whenever these tests are used, an incoherence may arise: sometimes the genotypic homogeneity hypothesis is not rejected, but the allelic hypothesis is. As we argue, this is logically impossible. Some methods that were recently proposed implicitly rely on the idea that this does not happen. In an attempt to correct this incoherence, we describe an alternative frequentist approach that is appropriate even when Hardy-Weinberg equilibrium does not hold. It is then shown that the problem remains and is intrinsic of frequentist procedures. Finally, we introduce the Full Bayesian Significance Test to test both hypotheses and prove that the incoherence cannot happen with these new tests. To illustrate this, all five tests are applied to real and simulated datasets. Using the celebrated power analysis, we show that the Bayesian method is comparable to the frequentist one and has the advantage of being coherent. Conclusions: Contrary to more traditional approaches, the Full Bayesian Significance Test for association studies provides a simple, coherent and powerful tool for detecting associations.