Comparing experiments of the stressed skin diaphragm spanning several and few purlins

Concerning the specialty of the testing of stressed skin diaphragm assembly, the current loading method of cantilever beam test is improved by the diagonally loading method. In order to investigate the differences of the shear behavior between the stressed skins spanning several purlins and few purlins , which have the same forms and spaces of the connections and purlins, comparing experiments are carried out. Using the curve fitting method, the test results are quantified. The shear rigidity of two specimens is gained. It shows that the shear rigidity of the diaphragm spanning several purlins is quite higher than that spanning few purlins, but the carrying capacity of the former is a little lower than that of the latter.

Field test study on the shear behaviour of stressed skin diaphragm spanning several purlins

Although profiled steel sheets have the diaphragm effect in steel structure, since there is no specific code to follow in China, it is only used as the reservation of the structural stiffness.So it results in economic wastes.In order to investigate the contribution of stressed skin to the overall stiffness, field tests are carried out to measure the lateral stiffness of the frames with and without stressed skin diaphgram.Based on the superposition principle and using the curve fitting method, the test results are quantified.The shear rigidity of stressed skin diaphgram spanning several purlins is gained indirectly.It shows that the shear rigidity of the diaphragm between two frames is even close to the lateral stiffness of one frame.

The effect of skin passing on the material behavior of metal strip in pure bending and tension

The metal strip used in roll forming has often been preprocessed by (tension or roller) leveling or by skin-pass rolling, and as a consequence, may contain residual stresses. These stresses are not well observed by the tensile test, but could have a significant effect on the bending and springback behavior. With the advent of improved process design techniques for roll forming, including advanced finite element techniques, the need for precise material property data has become important. The major deformation mode of roll forming is that of bending combined with unloading and reverse bending, and hence property data derived from bend tests could be more relevant than that from tensile testing.

This work presents a numerical study on the effect of skin passing on the material behavior of stainless steel strip in pure bending and tension. A two dimensional (2-D) numerical model was developed using Abaqus Explicit to analyze the affect of skin passing on the residual stress profile across a section for various working conditions. The deformed meshes and their final stress fields were then imported as pre-defined fields into Abaqus Standard, and the post-skin passing material behavior in pure bending was determined. The results show that a residual stress profile is introduced into the steel strip during skin passing, and that its shape and stress level depend on the overall thickness reduction as well as the number of rolling passes used in the skin passing process. The material behavior in bending and the amount of springback changed significantly depending on the skin pass condition.

Skin pedagogies and abject bodies

How does the beauty industry ‘narrate the skin’? What does it teach women from different cultural groups about the female body? How does skin function as a site where female subjection and abjection are produced and reproduced? In this paper we examine the skin industry pointing to its extreme commodification of the female body and to the inexcusable pressure this places on females of most age and cultural groups.We focus on two examples. Firstly, we show what the skin industry teaches girls and women about both their skin colour ‘problems’ and desirable practices of whitening and, secondarily, tanning. Secondly, we consider what the cosmetic surgery industry teaches us about female bodily ‘imperfections’ linked to certain ethnic and racial groups and the necessary ‘remedies’. Overall we show how the socio-cultural normalization of perfect skin is a product of a range of contemporary and enduring social and cultural forces overlain by complex pedagogies of power, expertise and affect.

A comparative assessment of austempered ductile iron as a substitute in weight reduction applications

Manufacturing engineering has had to undergo drastic changes in the approach to material selection in order to meet new design challenges. In the automotive industry, researchers in their effort to reduce emissions and satisfy environmental regulations, have shifted their focus to new emerging materials such as high-strength aluminium alloys, metal matrix composites, plastics, polymers and of late, Austempered Ductile Iron (ADI). ADI is a good choice for design where the criterion is high performance at reduced weight and cost. The unique, ausferrite microstructure gives the material desirable material properties and an edge over other materials. A comparative study of ADI in terms of materials properties and machining characteristics with other materials is desirable to highlight the potential of the material. This paper focuses on a comparative assessment of material and machining characteristics of ADI for different applications. The properties under consideration are machinability, weight and cost savings and versatility. ADI has a higher strength-to-weight ratio than aluminium making it a ready alternative for material selection. In terms of machinability, there are some problems associated with machining of ADI due to its work hardening nature. This paper attempts to identify the possible potential applications of ADI, by critically reviewing specific applications such as machinability, overall economics and service.

Chromatic interaction between egg pigmentation and skin chromatophores in the nuptial coloration of female two-spotted gobies

In two-spotted gobies (Gobiusculus flavescens Fabricius 1779), females develop an orange belly as they approach sexual maturity. Bright belly coloration is preferred by males and has been suggested to act as a female ornament. This coloration is unusual in that it originates partly from pigmentation of the abdominal skin but also from strongly pigmented gonads directly visible through the skin. In addition, females have been observed to temporarily become more colourful during courtship and competition. To understand how gonad and skin pigmentation interact in this nuptial coloration, the potential for colour modification via regulation of skin chromatophores was investigated. Noradrenaline caused aggregation of chromatophore pigment and was used to experimentally reduce the contribution of skin chromatophores to the nuptial coloration. Chromatophore pigment aggregation caused bellies to become less colourful and abdominal skin biopsies to become less colourful and more transparent. There was a strong positive relationship between belly coloration and the coloration of the underlying gonads. This shows that belly coloration honestly reflects egg pigmentation, mainly because the transparency of the abdominal skin allows other fish to see the gonads directly. Interestingly, when noradrenaline caused pigment to aggregate and thereby increased the transparency of the skin, the relationship between belly and gonad coloration weakened. We conclude that female G. flavescens have a potential to use skin chromatophores to rapidly alter their nuptial coloration, thereby affecting the efficacy with which information about gonad coloration is conveyed.

The integration substitute : the role of controls in managing human asset specificity

As the integration solution to the problem of specific assets cannot be replicated on human asset specificity because slavery is illegal, economic theory states that control systems substitute for integration through a balanced structure to help align diverse interests. To understand the intricate design features of the balance, we examine a case-study firm. For low human asset specificity, the restriction and segregation of usable decision rights link with standards. However, incentives are traced to individuals only to the extent task deviations do not create relevant future costs that are difficult to be self-corrected. For high specificity, incentives are related to outputs rather than outcomes, because outcome variations reduce the attractiveness of maintaining the balance. Subjective assessment is used as an efficient alternate ‘balancing’ solution and decision control is shared when available subjective data are inadequate.

Sleepwalking into the mirror : panic and the thin skin of a writer

This text interwoven with artworks by Elizabeth McQueen explores the act of writing and this writer’s search for a narrative form which, after Kafka, fuses dream and reality. Escaping from the back door of my PhD research, which has entered such liminal realities as sleepwalking and autism as a way of challenging familiar boundaries of western normative thought, this text explores a slightly different boundary transgression: a terrifying fusion of reality and writing when late one dark (but not stormy) night a character from my novel appeared at my back window.

Relationships between skin follicle characteristics and fibre properties of Suri and Huacaya alpacas and Peppin Merino sheep

We aimed to quantify the number, type and arrangement of skin follicles in Huacaya and Suri alpaca skin and correlate their follicle characteristics with fibre traits of harvested fibre and compared these relationships with those of Merino sheep. Fibre and skin samples were collected from the mid-side of 12 Huacaya alpacas, 24 Suri alpacas and 10 Merino sheep. The mean fibre diameter (MFD ± s.e.) of the Huacaya and Suri were: 35.5 ± 0.9 and 28.3 ± 1.0 μm, respectively. The follicle groups found for alpacas were very different from the normal trio of primary follicles found in sheep and goats. The follicle group of the alpacas consisted of a single primary follicle surrounded by a variable number of secondary follicles. The mean ± s.e. primary follicle density was 3.1 ± 0.3 and 2.7 ± 0.1 follicles/mm² for Huacaya and Suri, respectively. The mean ± s.e. secondary follicle density (SFD) was 13.7 ± 1.2 and 17.5 ± 0.6 follicles/mm² for Huacaya and Suri, respectively. The mean ± s.e. ratio of secondary to primary follicles (S/P ratio) was 5.1 ± 0.5 for the Huacaya and 7.3 ± 0.2 for the Suri alpacas. The sheep had higher S/P ratios and SFD, lower MFD and produced significantly heavier fleeces. The key correlations found between traits in alpacas include a negative correlation between SFD and MFD (r = –0.71, P = 0.001) and a negative correlation between S/P ratio and MFD (r = –0.44, P = 0.003) and a positive correlation between S/P ratio and total follicle density (r = 0.38, P = 0.010). The study revealed that important relationships exist between alpaca skin follicle characteristics and fibre characteristics. It was the number of secondary follicles in a group that imparts density and a corresponding reduced MFD.

Frequency of excisions and yields of malignant skin tumors in a population-based screening intervention of 360 288 whole-body examinations

Objective To explore the frequency of excisions and yields of histopathologically confirmed skin cancer.

Design A population-based skin cancer screening intervention (the SCREEN project) in the German state of Schleswig-Holstein (July 1, 2003, to June 30, 2004).

Setting Physician offices. Participants could choose between nondermatologist physicians and dermatologists for their initial whole-body skin examination. All screening physicians received a mandatory 8-hour training course.

Participants Inhabitants of Schleswig-Holstein 20 years or older with statutory health insurance (N = 360 288).

Main Outcome Measures Frequency of excisions and yields of malignant skin tumors (malignant melanomas [MMs], basal cell carcinomas [BCCs], and squamous cell carcinomas [SCCs]), stratified by sex and age.

Results Overall, 15 983 excisions were performed (1 of 23 screenees). A total of 3103 malignant skin tumors were diagnosed in 2911 persons: 585 MMs, 1961 BCCs, 392 SCCs, and 165 other malignant skin tumors. Overall, 116 persons (3103 of 360 288) had to be screened to find 1 malignant tumor, with 1 of 620 for MM, 1 of 184 for BCC, and 1 of 920 for SCC. Twenty excisions were performed to find 1 melanoma in men 65 years and older, but more than 50 excisions were required to find 1 melanoma in men aged between 20 and 49 years.

Conclusions The results of SCREEN suggest a high yield of malignant skin tumors in a large-scale population-based screening project. We found that a high number of excisions was performed in the youngest screenees with an associated low yield, suggesting a need in screener training to emphasize a more conservative attitude toward excisions in young screenees.