809 resultados para rochas vulcânicas
Resumo:
The Itararé Group is the record of one of the most significant glaciation events of the Gondwana. Of neocarboniferous-eopermian age, this unit has facies associations interpreted as resulted from shallow marine settings with glacial and deglacial water influence. The role of glaciers on the tectonic-sedimentary processes of the Itararé Group is striking, as typical facies such as diamictites, tilites, shales and rhythmites with dropstones are generated, besides the existence of glacially striated and polished surfaces. This work had as main goal to contribute to the geological knowledge of the Itararé Group in the central eastern portion of São Paulo State, using as basis outcrops from Itu, Salto and Porto Feliz, and also pertinent bibliographic data and well profiles located in the surrounding areas. About the stratigraphic framework, genetic association and paleogeography of these deposits, this work concludes that the area studied comprises the basal section of the Itararé Group. The stacking of the facies recognized during the field work begins with the striated and polished surfaces of the basement, described in Salto, superposed by tilites and diamictites with glacial movement features. Over these are the turbidites from Itu, associated with the glacier retreat. The outcrops of Porto Feliz are at the top of this succession, with deposits generated by flows with lateral and vertical variations, sometimes with prevalence of tractive conditions, and sometimes with sediments transported largely by suspension. Paleocurrent measurements show main flow directions towards NW, the same as glacial striae, suggesting the influence of reworking of sediments by the meltwater during deglacial periods
Resumo:
The study area is located in the geological parameters of the Pilar de Goiás Greenstone Belt (GO), it is part of the Pilar de Goias Group’s meta-volcano-sedimentary sequence. This is a homoclinal package constituted by terrigenous metassediments containing intercalations of meta-ultramafic rocks and iron formations. The units that were informally named in this work, are interpreted as belongs to the Serra do Moinho Formation. Through mineralogical associations the area’s metamorphism were classified as high greenschist facies garnet zone. Prior to this work were detected in the area, through soil samples, some auriferous anomalies. One of the objectives of this work is the detection of possibles hidrotermal alterations related to these anomalies presents in the study area
Resumo:
Microbialites (irregular agglutinated grains, laterally continuous mats and stromatolites) occur in small, nearly continuous outcrops over a ~60 m-thick carbonate interval of the Sumidouro Member, Lagamar Formation, Vazante Group, Meso-Neoproterozoic, on the Sumaré Farm, in Lagamar (MG, Southeastern Brazil). Diversified stromatolites formed under shallow, high energy conditions predominate and exhibit frequent lateral and vertical changes, including probable bioherm borders. In the lower part of the interval, coniform columnar stromatolites (Conophyton), representative of the deepest and/or calmest settings, are common. Higher up, narrow subcylindrical unbranched forms become abundant and may grade to forms with subparallel dichotomous or multiple divergent branches. The microbialites are apparently organized in shallowing upward cycles
Resumo:
The Bom Futuro tin deposit is located in Ariquemes, north-central state of Rondônia. Since its discovery in the late 80s, the tin deposit of Bom Futuro has been explored and considered one of the leading Brazilian producers of cassiterite, exploring it mainly in secondary deposits (placers) in the vicinity of the hill Bom Futuro. The primary mineralization occurs in the contacts between quartz veins and pegmatites with the rocks of the hill and its exploitation has been the goal of new studies in the area. These bodies occur in all rock types of the hill, leading edges of hydrothermal alteration with each rock. The focus of the study is the characterization of hydrothermal alteration through the analysis of the edges of pegmatitic veins intruded on each of the main rock types found on the hill Bom Futuro, which are: biotite gneiss, biotite amphibolite, subvolcanic breccia, topaz leucogranite, topaz leucoriolito and micro melassienito porphyry. The analysis and comparison showed familiarities between the edges of alteration encountered, and possible subdivision into three main zones: the inner zone or the vein itself, intermediate zone or transition zone and the change zone where the passage of hydrothermal features to rocks features is gradual. The cassiterite and sphalerite were found scattered in three zones, however in larger quantities in the intermediate zone, near the contact
Resumo:
The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin
Resumo:
Main occurrence of Cu-Au in Goias Magmatic Arc, the Chapada mine fits into the geological context of the Brasilia Fold Belt, specifically in the Mara Rosa Magmatic Arc. Four targets, named Hidrotermalito Norte and Sul, NW Chapada Mine Portion and Suruca, are situated in this context, which includes ortogneisses and rocks from the Mara Rosa volcanic-sedimentary sequence. All these targets have been studied due to the possibility of presenting a great potential in Cu-Au, as well as the Chapada mine. Hidrotermalitos Norte and Sul targets presents four lithological sequences, which were identified as: quartz-muscovite schist; muscovite quartzites and kyanite quartzites; quartz-biotite-amphibole schist with pyrite and epidote-amphibole-biotite gneisses with muscovite; muscovite-biotite gneisses. They are metamorphosed to amphibolites facies and retrogressive greenschist facies. Sulfetation represented mainly by pyrite. In the NW Chapada Mine Portion, three main lithological groups were identified and classified as biotite gneisses; honblende-quartz-biotite-schist; amphibolites, with the first group metamorphosed in greenschist facies (low grade), and the other two groups metamorphosed in amphibolites facies, with subsequent retrogressive metamorphism in greenschist facies. Sulfetation is represented by chalcopyrite and pyrite. Finally, also three main lithological groups were identified in the Suruca target, classified as garnet-chlorite-epidote-eiotite gneiss; biotite gneiss and chlorite-biotite gneiss with epidote and muscovite; muscovite-quartz schist, all them metamorphised in amphibolites, with retrometamorphism in greenschist facies. Sulfetation represented by pyrite and sphalerite
Resumo:
The Urucuia Aquifer System represents a strategic water source in western Bahia. Its baseflow is responsible for the flow rate of the main tributaries of São Francisco river left bank in the dry season, including the Rio Grande, its main tributary in Bahia state. This river has a hydrological regime heavily affected by groundwater and is located in a region with conflicts about water resources. The aquifers geology is constituted by neocretacious sandstones of Urucuia Group subdivided in Posse Formation and Serra das Araras Formation. The embasement is formed by neoproterozoic rocks of Bambuí Group. This work focuses on an important tool application, the mathematical model, whose function is represent approximately and suitably the reality so that can assist in different scenarios simulations and make predictions. Many studies developed in this basin provided the conceptual model basis including a full free aquifer, lithological and hydraulical homogeneity in entire basin, null flux at plateau borders and aquifer base. The finite element method is the numerical method used and FEFLOW the computational algorithm. The simulated area was discretized in a single layer with 27.357,6 km² (314.432 elements and 320.452 nodes) totaling a 4.249,89 km³ volume. Were utilized 21 observation wells from CERB to calibrate the model. The terrain topography was obtained by SRTM data and the impermeable base was generated by interpolation of descriptive profiles from wells and electric vertical drilling from previous studies. Works in this area obtained mean recharge rates varying approximately from 20% to 25% of average precipitation, thus the values of model recharge zones varying in this range. Were distributed 4 hydraulic conductivity zones: (K1) west zone with K=6x10-5 m/s; (K2) center-east zone with K=3x10-4 m/s; (K3) far east zone with K=5x10-4 m/s; e (K4) east-north zone with K=1x10-5 m/s. Thereby was incorporated to the final conceptual model...
Resumo:
Hydrocarbon accumulations occur in marine carbonate reservoirs of Quissamã Formation (early to midlle Albian), southwest Campos Basin. We investigated Pampo, Bicudo and Bonito fields, in order to understand the tectono-structural framework of oncolite/bioclast coarse-grained calcarenite reservoir and the calcilutite-marl-shale sealing interval (Late Albian to Turonian). The database of eleven wells from those fields allowed to elaborate structural sections correlating the Macaé Group – both Quissamã reservoir and Outeiro seal, the latter corresponding to the tectonic deepening phase of basin evolution. Based on density and electric logs, it was prepared structural sections of the carbonate reservoirs with consequent identification of porous zones and oil-water contacts. An extensive 3-D seismic database (~300 Km2) allowed to map three reflectors which represent the limiting units of Macaé Group
Resumo:
The study area comprises Guarinos Greenstone Belt which is located in the centralwest state of Goias and has an approximate size of 280 km2. The present work has as main objective to characterize the metamorphism of the greenstone belt and the relationship between the tectonic events and the metamorphism. For the execution of the work we used data collected in the course Geological Mapping of Crystalline Area of the geology course of UNESP, classes 2009 and 2010, the data collected by Alex Choupina Joaquim Andrade Silva in his master's thesis and the information collected in field in the study area. This compilation of data allows approximately 200 thin sections have been evaluated and allowed the construction of the metamorphic map in scale 1:125.000, also allowed the preparation of the geological map in scale 1:125.000 greestone belt, based on 1:25.000 scale maps performed by students of UNESP and the mapping conducted by Silva (2011). The study area was divided into two tectonic compartments depending on the Shear Zone Engenho Velho that longitudinally crosses study area, with direction approximately NW-SE. The west compartment is bordered by granite-gneiss complex and the east compartment, seems thicker to the south and narrows gradually towards the north and its structure is seen in general as a great monoclinal with NW-SE direction with trim to SW, this way your stack was considered as a package of rocks at the base and metaultramafic metamafic the top, with a second package in tectonic contact, which is composed of detrital and chemical metasedimentary rocks. The east compartment is represented by the intrusion of a large granitic body surrounded by amphibolites and metasediments, is bounded on the east by a granite-gneiss complexes through thrust fault, and is bounded on the west by the other compartment. The structure of the compartment is seen as a major axis oriented roughly... (Completo abstract click electronic access below)
Resumo:
In order to to research, the region of Perau, base metal mineralization, Grupo Votorantim Metals conducted a soil sampling on targets predetermined holding its chemical analysis. These reviews have been provided by the company for this work was to evaluate the potential use of these data pedogeochemical multi-element for refinement of the work of geological mapping. We selected six targets: Varginha, Salvador, Guararema Taquara Lisa and Coffin of Mendes, in the municipalities of Adrianople, Cerro Azul and Tunas do Paraná, located in Vale do Ribeira (PR). Both have about 10 km2 and situated in the geological context of the Fold Belt Terrane and the Massif de Joinville. The main rock types are present metasedimentary rocks of low to medium grade metamorphic, interspersed the amphibolites ortoderivados, both belonging to the Complex Perau, gneisses and migmatitic Complex. Applied to the geochemical data descriptive statistical techniques (variogram, kriging and histogram). From the correlation between the distributions of elements with the geological data, we could assess the potential of the proposed methodology.
Resumo:
Of the four lacustrine deltaic models, which were found in the Pendência formation, two are represented in the Serraria field. Respectively the deltaic models 1 and 3 shows the reservoir zones A and B. The Zone A is divided into six sub-areas. Each is representing a smaller cycle of development of sigmoidal lobes of deltaic front. Zone B produces in reservoirs of Model 3, or so called Full delta. The Zone B is formed by overlapping the deltaic plain system over the deltaic/prodeltaic front (model 1). This work uses the method of zooming with the aim to contextualize the geometric aspects of the sand bodies, highlighting the analysis of facies and diagenesis with help of pictures and testimonies of thin sections. The sigmoidal lobes of Zone A are fine to very fine sandstones, well sorted, with a arcosian composition.;practically with a weak compaction and cementation of a kind of film of clay (if very fine) and overgrowth feldspar (fine texture). This silicate phases are succeeded by cementation of poiquilotópica calcite, and after this a stage of dissolution, containing only regular permoporosity for this reservoir. Zone B has a combination of two types of deltaic plain reservoir. One is the rarest of distributary channel and the other the most common of lobes of crevasse. In the channel coarse to medium-grained and poor to moderate sorted sandstones are formed (tuning up), and with a lytic arcosiana nature. Rarely there are cements, including growth of feldspar and rhombohedral dolomite, which prevent a high permoporosity of the reservoir. In the crevasse lobes, the sandstones are laminated, fine and well sorted, arkosic, rarely with overgrowth feldspar and calcite poiquilotópica, and with a good intergranular permoporosity
Resumo:
The Ambrósio dome is a granodioritic batholiths of elliptical geometry, 40km length in the N-S direction and variable width of up to 8 km, has a weakly deformed nucleus with intensely deformed margins, in its northern portion is intruded in orthogneiss that belong to the Archean basement, and its southern part comes in direct contact with the volcano-sedimentary sequence of Paleoproterozoic Rio Itapicuru Greenstone Belt (RIGB), Bahia. From geological mapping on 1:25:000 scale were recognized two structural domains, termed West Domain and East Domain. From investigation of these domains was identified a major shear zone, which puts in contact two distinct stratigraphic sequences, one west, consisting primarily of metavulcanic and metapyroclastic rocks with records of low-grade regional metamorphism, and east discontinuity a metassedimentary domain, with record of gradational contact metamorphism, deformation and compression generated from the rise of Ambrosio Pluton. Such records put into question the structural and stratigraphic models in the literature so far
Resumo:
The Vazante Fault Zone (VFZ), located northwestward of Minas Gerais, host the largest zinc deposit known in the Brazilian territory. This structure is hosted in Vazante’s Group rocks, a metassedimentary sequence of marine environment. Near Vazante is situated the south end of the VFZ. To the west, occur the Serra do Garrote inflexion, characterized by a curvature in the contact of Formations Serra do Garrote and Serra do Poço Verde. This structure is through the analysis of aerial imagery of the region and represented in the published geological maps. The objective of this work is to understand what causes this inflexion and determine whether it affects the VZF, causing a shift in the same, and possibly, in the mineralization as well. To this end, it was done a mapping work in the region covering the Serra do Garrote inflexion and the south end of the VFZ, in 1:25.000 scale, supplemented by petrographic description of thin section and geologic sections, with cooperated to the understanding of the structural evolution of the region. Data analysis allowed the identification of six deformation phases. The D1 an D2 phases generated the main foliation. The D3 phase generate kink bands folds, with NS axis and vertical axial plane. The fourth phase is responsible for generating the Vazante Fault Zone. The fifth phase produces low angle folds and shear zones, subparallel to S1//S2. The last phase generates folds with NW axis and vertical axial plane, with causes the inflection of lithologic contactas. Field observations also make possible the conclusion that the Vazante Fault Zone presents a south continuation, which is affected by deformation associated to D6 phase attributing to the trace of the VFZ a curved geometry, similar to that exhibited by lithologic contacts between units of the map
Resumo:
The Roosevelt-Domain Aripuanã that by Filho et al 2004 is characterized by a metavolcanic sedimentary sequence, containing acidic to interemediary metavolcanic rocks and clastic and chemical sediments, deformed and metamorphosed at low grade, with U-Pb age of 1.743 +- 4 Ma, (by Granito Zé do Torno), and circumscribed bodies of granites late to post-orogenic (Aripuanã)...
Resumo:
Among the flow, the flows have the highest destructive potential, may cause disasters with a very high number of victims, as recorded in the events Caraguatatuba (SP) and the Serra das Araras (RJ) in 1967; Valeu do Rio Figueira, in Timbé do Sul (SC) between 1995 and 1996; Vale do Itajaí in Santa Catarina, in 2008, Teresópolis, Petrópolis and Nova Friburgo (RJ), in December 2010 and January 2011. This project aimed to prioritize the main determinants of inducing processes of debris flows by applying the method of decision making AHP (Analytical Hierarch Process). Therefore, the following stages of work were defined: research of the major factors of debris flows, questionnaire design method for application of AHP expert on the subject, analysis of the results obtained from calculating the ratio of consistency and preparation of proposal for hierarchical of conditions for debris flows. From the surveys it was possible to establish a relationship of conditions according to the scale of work, defining three levels: regional (1:250,000 to 1:100,000), Semi-Detail (1:50,000 to 1:25,000) and Detail (1: 10,000 or higher). The factors found were: concentration time, the flood wave, rain, landslide susceptibility (slope), drainage and development in the deposition. The project analyzed the results obtained from the questionnaires, which allowed the ranking of the constraints, contributing to weight constraints in studies of multicriteria mapping of susceptibility to the occurrence of debris flows. The study showed that the most of the analyzed datas were inconsistent because of the different opinion of the judges