Symmetry and order parameter dynamics of the human odometer

Bipedal gaits have been classified on the basis of the group symmetry of the minimal network of identical differential equations (alias cells) required to model them. Primary bipedal gaits (e.g., walk, run) are characterized by dihedral symmetry, whereas secondary bipedal gaits (e.g., gallop-walk, gallop- run) are characterized by a lower, cyclic symmetry. This fact has been used in tests of human odometry (e.g., Turvey et al. in P Roy Soc Lond B Biol 276:4309–4314, 2009, J Exp Psychol Hum Percept Perform 38:1014–1025, 2012). Results suggest that when distance is measured and reported by gaits from the same symmetry class, primary and secondary gaits are comparable. Switching symmetry classes at report compresses (primary to secondary) or inflates (secondary to primary) measured distance, with the compression and inflation equal in magnitude. The present research (a) extends these findings from overground locomotion to treadmill locomotion and (b) assesses a dynamics of sequentially coupled measure and report phases, with relative velocity as an order parameter, or equilibrium state, and difference in symmetry class as an imperfection parameter, or detuning, of those dynamics. The results suggest that the symmetries and dynamics of distance measurement by the human odometer are the same whether the odometer is in motion relative to a stationary ground or stationary relative to a moving ground.

Development and application of NMR techniques to study water-in-CO2 microemulsions

Self-assembly is a phenomenon that occurs frequently throughout the universe. In this work, two self-assembling systems were studied: the formation of reverse micelles in isooctane and in supercritical CO2 (scCO2), and the formation of gels in organic solvents. The goal was the physicochemical study of these systems and the development of an NMR methodology to study them. In this work, AOT was used as a model molecule both to comprehensively study a widely researched system water/AOT/isooctane at different water concentrations and to assess its aggregation in supercritical carbon dioxide at different pressures. In order to do so an NMR methodology was devised, in which it was possible to accurately determine hydrodynamic radius of the micelle (in agreement with DLS measurements) using diffusion ordered spectroscopy (DOSY), the micellar stability and its dynamics. This was mostly assessed by 1H NMR relaxation studies, which allowed to determine correlation times and size of correlating water molecules, which are in agreement with the size of the shell that interacts with the micellar layer. The encapsulation of differently-sized carbohydrates was also studied and allowed to understand the dynamics and stability of the aggregates in such conditions. A W/CO2 microemulsion was prepared using AOT and water in scCO2, with ethanol as cosurfactant. The behaviour of the components of the system at different pressures was assessed and it is likely that above 130 bar reverse microemulsions were achieved. The homogeneity of the system was also determined by NMR. The formation of the gel network by two small molecular organogelators in toluene-d8 was studied by DOSY. A methodology using One-shot DOSY to perform the spectra was designed and applied with success. This yielded an understanding about the role of the solvent and gelator in the aggregation process, as an estimation of the time of gelation.

How to increase reach efficiency and effectiveness of MEO’s digital marketing campaigns?

Field lab: Business project

Desensitization of thermal hyperemia in the skin is reproducible.

OBJECTIVE: Local heating increases skin blood flow SkBF (thermal hyperemia). In a previous study, we reported that a first local thermal stimulus could attenuate the hyperemic response to a second one applied later on the same skin spot, a phenomenon that we termed desensitization. However, other studies found no evidence for desensitization in similar conditions. The aim of the present work was to test whether it was related to differences in instrumentation. METHODS: Twenty-eight healthy young males were studied. Two pairs of heating chambers, one custom-made (our study) and one commercial (other groups), were affixed to forearm skin. SkBF was measured with single-point laser-Doppler flowmetry (LDF) (780nm) in one pair, and laser-Doppler imaging (LDI) (633nm) in the other. A temperature step from 34 to 41°C, was applied for 30minutes and repeated after two hours. RESULTS: During the second thermal challenge, the plateau SkBF was lower than during the first thermal and was observed with each of the four combinations of SkBF measurement techniques and heating equipment (p<0.05 for all conditions, range -9% to -16% of the initial value). CONCLUSION: Desensitization of thermal hyperemia is not specific to peculiar operating conditions.

Quantification of aortic flow by phase-contrast magnetic resonance in patients with bicuspid aortic valve.

AIMS: Bicuspid aortic valve (BAV) causes complex flow patterns in the ascending aorta (AAo), which may compromise the accuracy of flow measurement by phase-contrast magnetic resonance (PC-MR). Therefore, we aimed to assess and compare the accuracy of forward flow measurement in the AAo, where complex flow is more dominant in BAV patients, with flow quantification in the left ventricular outflow tract (LVOT) and the aortic valve orifice (AV), where complex flow is less important, in BAV patients and controls. METHODS AND RESULTS: Flow was measured by PC-MR in 22 BAV patients and 20 controls at the following positions: (i) LVOT, (ii) AV, and (iii) AAo, and compared with the left ventricular stroke volume (LVSV). The correlation between the LVSV and the forward flow in the LVOT, the AV, and the AAo was good in BAV patients (r = 0.97/0.96/0.93; P < 0.01) and controls (r = 0.96/0.93/0.93; P < 0.01). However, in relation with the LVSV, the forward flow in the AAo was mildly underestimated in controls and much more in BAV patients [median (inter-quartile range): 9% (4%/15%) vs. 22% (8%/30%); P < 0.01]. This was not the case in the LVOT and the AV. The severity of flow underestimation in the AAo was associated with flow eccentricity. CONCLUSION: Flow measurement in the AAo leads to an underestimation of the forward flow in BAV patients. Measurement in the LVOT or the AV, where complex flow is less prominent, is an alternative means for quantifying the systolic forward flow in BAV patients.

Motivational model of problem drinking for men and women /

This thesis tested a path model of the relationships of reasons for drinking and reasons for limiting drinking with consumption of alcohol and drinking problems. It was hypothesized that reasons for drinking would be composed of positively and negatively reinforcing reasons, and that reasons for limiting drinking would be composed of personal and social reasons. Problem drinking was operationalized as consisting of two factors, consumption and drinking problems, with a positive relationship between the two. It was predicted that positively and negatively reinforcing reasons for drinking would be associated with heavier consumption and, in turn, more drinking problems, through level of consumption. Negatively reinforcing reasons were also predicted to be associated with drinking problems directly, independent of level of consumption. It was hypothesized that reasons for limiting drinking would be associated with lower levels of consumption and would be related to fewer drinking problems, through level of consumption. Finally, among women, reasons for limiting drinking were expected to be associated with drinking problems directly, independent of level of consumption. The sample, was taken from the second phase of the Niagara Young Aduh Health Study, a community sample of young adult men and women. Measurement models of reasons for drinking, reasons for limiting drinking, and problem drinking were tested using Confirmatory Factor Analysis. After adequate fit of each measurement model was obtained, the complete structural model, with all hypothesized paths, was tested for goodness of fit. Cross-group equality constraints were imposed on all models to test for gender differences. The results provided evidence supporting the hypothesized structure of reasons for drinking and problem drinking. A single factor model of reasons for limiting drinking was used in the analyses because a two-factor model was inadequate. Support was obtained for the structural model. For example, the resuhs revealed independent influences of Positively Reinforcing Reasons for Drinking, Negatively Reinforcing Reasons for Drinking, and Reasons for Limiting Drinking on consumption. In addition. Negatively Reinforcing Reasons helped to account for Drinking Problems independent of the amount of alcohol consumed. Although an additional path from Reasons for Limiting Drinking to Drinking Problems was hypothesized for women, it was of marginal significance and did not improve the model's fit. As a result, no sex differences in the model were found. This may be a result of the convergence of drinking patterns for men and women. Furthermore, it is suggested that gender differences may only be found in clinical samples of problem drinkers, where the relative level of consumption for women and men is similar.

The role of water in determining structure and function of macromolecules and macromolecular assemblies /

The interaction of biological molecules with water is an important determinant of structural properties both in molecular assemblies, and in conformation of individual macromolecules. By observing the effects of manipulating the activity of water (which can be accomplished by limiting its concentration or by adding additional solutes, "osmotic stress"), one can learn something about intrinsic physical properties of biological molecules as well as measure an energetic contribution of closely associated water molecules to overall equilibria in biological reactions. Here two such studies are reported. The first of these examines several species of lysolipid which, while present in relatively low concentrations in biomembranes, have been shown to affect many cellular processes involving membrane-protein or membrane-membrane interactions. Monolayer elastic constants were determined by combining X-ray diffraction and the osmotic stress technique. Spontaneous radii of curvature of lysophosphatidylcholines were determined to be positive and in the range +30A to +70A, while lysophosphatidylethanolamines proved to be essentially flat. Neither lysolipid significantly affected the bending modulus of the monolayer in which it was incorporated. The second study examines the role of water in theprocess of polymerization of actin into filaments. Water activity was manipulated by adding osmolytes and the effect on the equilibrium dissociation constant (measured as the criticalmonomer concentration) was determined. As water activity was decreased, the critical concentration was reduced for Ca-actin but not for Mg-actin, suggesting that 10-12 fewer water molecules are associated with Ca-actin in the polymerized state. Thisunexpectedly small amount of water is discussed in the context of the common structural motif of a nucleotide binding cleft.

Foraging ecology and parental care of common terns (Sterna hirundo) nesting in Windermere Basin, Lake Ontario

The relationships among chick feeding, size and type of prey item, and foraging time away from the brood have not been well studied in seabirds. This study investigated spatial and temporal patterns of foraging and chick-provisioning among 23 radio-tagged male common terns nesting at Hamilton Harbour, Lake Ontario during 1991 and 1992. Telemetry data were collected concurrently with behavioural observations from an elevated blind. Terns fitted with transmitters did not differ from controls with respect to either brood attendance, patterns of chick mortality, species and size distributions of prey delivered to offspring, or chick-provisioning rates. There was a clear separation of parental roles: males were primarily responsible for feeding chicks while females allocated more time to brood attendance. The prey species most commonly delivered to chicks by adults were rainbow smelt (Osmerus mordax) and alewife (A/osa pseudoharengus), followed in importance by larval fish, emerald shiner (Notropis antherinoides), salmonids, and fathead minnows (Pimepha/es prome/as). The relative proportions of various fish speCies delivered to chicks by males differed over the course of each breeding season, and there was also much variability in species composition of prey between years. Sizes of prey delivered to chicks also differed between sampling periods. The modal size of fish brought to chicks during Peak 1991 was 1.5 bill lengths, while the majority of prey in Late 1991 were small larval fish. The reverse trend occurred in 1992 when small fish were delivered to chicks predominantly during the Peak nesting period. During periods when predominantly small fish were delivered to chicks, the foraging activity of radio-tagged males was concentrated within a two kilometer radius of the colony. The observed variation in prey composition and foraging locations during the study likely reflects temporal variation in the availability of prey in the vicinity of the colony. Males delivered fish to chicks at a constant rate, while females 4 increased their feeding frequency over the first six to ten brood days. The mean length of fish delivered to chicks by adults increased significantly with increasing chick age. As a group, within each nesting period, transmittered males either foraged predominantly in the same directional bearing (north during Peak 1991, south during Late 1992), or concentrated foraging activity in the immediate vicinity of the colony (Late 1991, Peak 1992). However, individual radio-tagged males exhibited unique and predictable foraging patterns, often favouring specific locations within these areas and differing in their secondary foraging patterns. Overall, the Lake Ontario shoreline between NCB Bay" (3.5 km south of colony) and the lift bridge canal (4 km north of colony) was the foraging area used most frequently by radiotagged males during the chick-rearing period. Foraging patterns of transmittered males at Windermere Basin are similar to patterns of peak-nesting common terns, but differ from those of late-nesters, at a nearby colony (Port Colborne, Lake Erie). Differences between the foraging patterns of late-nesting terns at these colonies likely reflect differences in annual patterns of fish availability between the two locations. No relationship was found between foraging proficiency of adults and survival of offspring. Stochastic factors, such as predation by black-crowned nightherons (Nycticorax nycticorax) and adverse weather conditions during the early stages of chick rearing, may be more important determinants of common tern breeding success than parental quality or fish availability.

Oxygen exchange in galls of Eurosta solidaginis (Diptera: Tephritidae)

Hypoxia in plant tissue should affect animals living within. Gallmakers stimulate their plant hosts to produce the gall they inhabit and feed on, and also influence the gall phenotype for other adaptations, such as defense against predators. The potential for hypoxia in galls of Eurosta solidaginis was studied in the context of potential adaptations to gall oxygen level, using a combination of direct measurement, mathematical modelling, and respirometry on both gallmakers and hosts. Modelling results suggested mild hypoxia tolerable to the larva persists for most of the growth season, whereas more severe hypoxia may occur earlier in fully-grown young galls. Field data from one of the two years studied showed hypoxia more severe than expected, and coincided with adverse weather conditions and high larval mortality. The hypoxia may be related to host response to adverse weather. Whether hypoxia directly caused larval mortality requires further study.

QUANTIFICATION AND EXTRACTION OF SURFACE FEATURES FROM DIGITAL TERRAIN MODELS

Digital Terrain Models (DTMs) are important in geology and geomorphology, since elevation data contains a lot of information pertaining to geomorphological processes that influence the topography. The first derivative of topography is attitude; the second is curvature. GIS tools were developed for derivation of strike, dip, curvature and curvature orientation from Digital Elevation Models (DEMs). A method for displaying both strike and dip simultaneously as colour-coded visualization (AVA) was implemented. A plug-in for calculating strike and dip via Least Squares Regression was created first using VB.NET. Further research produced a more computationally efficient solution, convolution filtering, which was implemented as Python scripts. These scripts were also used for calculation of curvature and curvature orientation. The application of these tools was demonstrated by performing morphometric studies on datasets from Earth and Mars. The tools show promise, however more work is needed to explore their full potential and possible uses.

The contribution of skate blade properties to skating speed

The purpose of the study was to investigate the relative contribution of skate blade properties to on-ice skating speed. Thirty-two male ice hockey players (mean age = 19±2.65 yrs.) representing the Ontario Minor Hockey Association (OMHA; Midget AAA and Junior), Canadian Inter University Sport (CIS: Varsity), Ontario hockey league (OHL) and East Coast Hockey League (ECHL), and the playing positions of forwards (n=18) and defense (n=14) were recruited to participate. Skate related equipment worn by the players for the purpose of the research was documented and revealed that 80% of the players wore Bauer skates, Tuuk blade holders and LS2 skate blades. Subjects completed a battery of eight on-ice skating drills used to measure and compare two aspects of skating speed; acceleration [T1(s)] and total time to complete each drill [TT(s)] while skating on three skate blade conditions. The drills represented skills used in the game of hockey, both in isolation (e.g., forward skating, backward skating, stops and starts, and cornering) and in sequence to simulate the combination of skills used in a shift of game play. The three blade conditions consisted of (i) baseline, represented by the blades worn by the player throughout their current season of play; (ii) experimental blades (EB), represented by brand name experimental blades with manufacturers radius of contour and a standardized radius of hollow; and (iii) customized experimental blades (CEB), represented by the same brand name experimental blades sharpened to the players’ preference as identified in the baseline condition. No significant differences were found in acceleration time [T1(s)] or total time to complete [TT(s)] the isolated drills across blade conditions; however significant differences were revealed in both T1(s) and TT(s) measured during the execution of the sequenced drill across blade conditions. A iii Bonferroni post hoc test revealed that players skated significantly faster when skating on the CEB condition compared to the baseline condition (p≤.05). A questionnaire assessing subjects perceived comfort, confidence and effort expended while skating on the experimental blades revealed that players were significantly more comfortable when skating on the CEB versus the EB condition (p≤.05). Outcomes of the study provide evidence to suggest that the experimental skate blades customized with the players preferred blade sharpening characteristics results in faster skating speed in a combination drill representing skills performed in gameplay.

Identification of Genomic Variants Associated with Adolescent Idiopathic Scoliosis (AIS) in French-Canadian Population

La scoliose idiopathique est une déformation tridimensionnelle de la colonne vertébrale dont la pathogenèse reste obscure. Cette maladie affecte 2-4% des adolescents de 10-18 ans parmi les garçons et les filles. Il est à noter que les filles sont plus sévèrement affectées et ce en plus grand nombre que les garçons. Les études de jumeaux ont montré que les facteurs génétiques jouent un rôle important dans la scoliose idiopathique de l'adolescent (SIA). Depuis 2010, les études d'association pan génomiques ont été multipliées dans les recherches, visant à trouver des gènes candidats impliqués dans la SIA à travers des examens des polymorphismes nucléotidiques (SNPs). Un test génétique nommé "ScoliScore" a été publié pour essayer de prédire la progression de courbure dans la population caucasienne. Cependant, l'association n'a pas été reproduite dans une grande étude japonaise, soulignant l'importance d'une étude de réplication dans une population caucasienne indépendante. Dans ce contexte, mon projet de maîtrise a permis de génotyper plus de 1,4 millions de SNPs dans une cohorte canadienne-française dans le but: 1) de valider l'association de ScoliScoreTM; et 2) d’identifier les variants génomiques associées à la SIA dans la population québécoise. Notre étude a montré qu’aucun des variants constituant le test ScoliScoreTM n’était associé à la SIA. Ceci suggère que l'absence d'association dans une cohorte japonaise n'est pas due à l'appartenance ethnique. Aussi, nous avons identifié des variants génomiques associés significativement à l’initiation et/ou la progression de SIA dans la population québécoise, suggérant des gènes candidats impliqués dans la pathogenèse de SIA.

The Role of Diffusion in ISOL Targets for the Production of Radioactive Ion Beams

On line isotope separation techniques (ISOL) for production of ion beams of short-lived radionuclides require fast separation of nuclear reaction products from irradiated target materials followed by a transfer into an ion source. As a first step in this transport chain the release of nuclear reaction products from refractory metals has been studied systematically and will be reviewed. High-energy protons (500 - 1000 MeV) produce a large number of radionuclides in irradiated materials via the nuclear reactions spallation, fission and fragmentation. Foils and powders of Re, W, Ta, Hf, Mo, Nb, Zr, Y, Ti and C were irradiated with protons (600 - 1000 MeV) at the Dubna synchrocyclotron, the CERN synchrocyclotron and at the CERN PS-booster to produce different nuclear reaction products. The main topic of the paper is the determination of diffusion coefficients of the nuclear reaction products in the target matrix, data evaluation and a systematic interpretation of the data. The influence of the ionic radius of the diffusing species and the lattice type of the host material used as matrix or target on the diffusion will be evaluated from these systematics. Special attention was directed to the release of group I, II and III-elements. Arrhenius plots lead to activation energies of the diffusion process.

Microwave Dielectric Properties of RETiTaO6 (RE = La, Ce,Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, Yb, Al, and In) Ceramics

Microwave dielectric ceramics based on RETiTaO6 (RE = La, Cc, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, Yb, Al, and In) were prepared using a conventional solid-state ceramic route. The structure and microstructure of the samples were analyzed using x-ray diffraction and scanning electron microscopy techniques. The sintered samples were characterized in the microwave frequency region. The ceramics based on Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy, which crystallize in orthorhombic aeschynite structure, had a relatively high dielectric constant and positive T f while those based on Ho, Er, and Yb, with orthorhombic euxenite structure, had a low dielectric constant and negative Tf. The RETiTaO6 ceramics had a high-quality factor. The dielectric constant and unit cell volume of the ceramics increased with an increase in ionic radius of the rare-earth ions, but density decreased with it. The value of Tf increased with an increase in RE ionic radii, and a change in the sign of Tf occurred when the ionic radius was between 0.90 and 0.92 A. The results indicated that the boundary of the aeschynite to euxenite morphotropic phase change lay between DyTiTaO6 and HoTiTaO6. Low-loss ceramics like ErTiTaO6 (Er = 20.6, Qxf = 85,500), EuTiTaO6 (Er = 41.3, Qxf = 59,500), and YTiTaO6 (Er = 22.1, Q„xf = 51,400) are potential candidates for dielectric resonator applications

Tailoring the Microwave Dielectric Properties of GdTiNb 1 _-xTa,O6 and Sm 1 _X Y,TiTa06 Ceramics

Microwave dielectric ceramics based on GdTiNb,-,.Ta,O6 and Sml _.,Y,TiTa06 have been prepared by conventional solid state method . The GdTiTaO6 and SmTiTaO6 have aeschenite structure with positive rr and GdTiNbO6 and YTiTaO6 have euxenite structure with negative rr. The rr of the ceramics has been tuned by preparing solid solution phases between the aeschynites and euxenites for a possible zero rr material . It is observed that GdTiNbt_YTa.,O6 undergoes a phase transition from aeschynite to euxenite when x=0.75 and in Sml-,YxTiTa06 for x= 0.73. The microwave dielectric properties change abruptly near the transition region . The rr value approaches zero near the phase transition region while the samples have poor sinterability and poor quality factor . The unloaded quality factor, dielectric constant and the sign of rr of the solid solution phases are found to depend on the average ionic radius of the rare earth ion in RE ,-5RE',TiTaO6. The boundary of the euxenite-aeschynite phase transition occurs at an average ( RE) ionic radius of 0.915 A in Sm,_, Y,.TiTaO6 solid solution phases