The Optimal Degree of Monetary-Discretion in a New Keynesian Model with Private Information

This paper considers the optimal degree of discretion in monetary policy when the central bank conducts policy based on its private information about the state of the economy and is unable to commit. Society seeks to maximize social welfare by imposing restrictions on the central bank's actions over time, and the central bank takes these restrictions and the New Keynesian Phillips curve as constraints. By solving a dynamic mechanism design problem we find that it is optimal to grant "constrained discretion" to the central bank by imposing both upper and lower bounds on permissible inflation, and that these bounds must be set in a history-dependent way. The optimal degree of discretion varies over time with the severity of the time-inconsistency problem, and, although no discretion is optimal when the time-inconsistency problem is very severe, our numerical experiment suggests that no-discretion is a transient phenomenon, and that some discretion is granted eventually.

Maximal Physiological Parameters during Partial Body-Weight Support Treadmill Testing.

PURPOSE: This study investigated maximal cardiometabolic response while running in a lower body positive pressure treadmill (antigravity treadmill (AG)), which reduces body weight (BW) and impact. The AG is used in rehabilitation of injuries but could have potential for high-speed running, if workload is maximally elevated. METHODS: Fourteen trained (nine male) runners (age 27 ± 5 yr; 10-km personal best, 38.1 ± 1.1 min) completed a treadmill incremental test (CON) to measure aerobic capacity and heart rate (V˙O2max and HRmax). They completed four identical tests (48 h apart, randomized order) on the AG at BW of 100%, 95%, 90%, and 85% (AG100 to AG85). Stride length and rate were measured at peak velocities (Vpeak). RESULTS: V˙O2max (mL·kg·min) was similar across all conditions (men: CON = 66.6 (3.0), AG100 = 65.6 (3.8), AG95 = 65.0 (5.4), AG90 = 65.6 (4.5), and AG85 = 65.0 (4.8); women: CON = 63.0 (4.6), AG100 = 61.4 (4.3), AG95 = 60.7 (4.8), AG90 = 61.4 (3.3), and AG85 = 62.8 (3.9)). Similar results were found for HRmax, except for AG85 in men and AG100 and AG90 in women, which were lower than CON. Vpeak (km·h) in men was 19.7 (0.9) in CON, which was lower than every other condition: AG100 = 21.0 (1.9) (P < 0.05), AG95 = 21.4 (1.8) (P < 0.01), AG90 = 22.3 (2.1) (P < 0.01), and AG85 = 22.6 (1.6) (P < 0.001). In women, Vpeak (km·h) was similar between CON (17.8 (1.1) ) and AG100 (19.3 (1.0)) but higher at AG95 = 19.5 (0.4) (P < 0.05), AG90 = 19.5 (0.8) (P < 0.05), and AG85 = 21.2 (0.9) (P < 0.01). CONCLUSIONS: The AG can be used at maximal exercise intensities at BW of 85% to 95%, reaching faster running speeds than normally feasible. The AG could be used for overspeed running programs at the highest metabolic response levels.

Derivation of soil-specific streaming potential electrical parameters from hydrodynamic characteristics of partially saturated soils

Water movement in unsaturated soils gives rise to measurable electrical potential differences that are related to the flow direction and volumetric fluxes, as well as to the soil properties themselves. Laboratory and field data suggest that these so-called streaming potentials may be several orders of magnitudes larger than theoretical predictions that only consider the influence of the relative permeability and electrical conductivity on the self potential (SP) data. Recent work has improved predictions somewhat by considering how the volumetric excess charge in the pore space scales with the inverse of water saturation. We present a new theoretical approach that uses the flux-averaged excess charge, not the volumetric excess charge, to predict streaming potentials. We present relationships for how this effective excess charge varies with water saturation for typical soil properties using either the water retention or the relative permeability function. We find large differences between soil types and the predictions based on the relative permeability function display the best agreement with field data. The new relationships better explain laboratory data than previous work and allow us to predict the recorded magnitudes of the streaming potentials following a rainfall event in sandy loam, whereas previous models predict values that are three orders of magnitude too small. We suggest that the strong signals in unsaturated media can be used to gain information about fluxes (including very small ones related to film flow), but also to constrain the relative permeability function, the water retention curve, and the relative electrical conductivity function.

(Optimal) Spatial Aggregation in the Determinants of Industrial Location

Empirical studies on the determinants of industrial location typically use variables measured at the available administrative level (municipalities, counties, etc.). However, this amounts to assuming that the effects these determinants may have on the location process do not extent beyond the geographical limits of the selected site. We address the validity of this assumption by comparing results from standard count data models with those obtained by calculating the geographical scope of the spatially varying explanatory variables using a wide range of distances and alternative spatial autocorrelation measures. Our results reject the usual practice of using administrative records as covariates without making some kind of spatial correction. Keywords: industrial location, count data models, spatial statistics JEL classification: C25, C52, R11, R30

Optimal latent period in a bacteriophage population model structured by infection-age

We study the lysis timing of a bacteriophage population by means of a continuously infection-age-structured population dynamics model. The features of the model are the infection process of bacteria, the natural death process, and the lysis process which means the replication of bacteriophage viruses inside bacteria and the destruction of them. We consider that the length of the lysis timing (or latent period) is distributed according to a general probability distribution function. We have carried out an optimization procedure and we have found the latent period corresponding to the maximal fitness (i.e. maximal growth rate) of the bacteriophage population.

Eumelanin-based coloration and fitness parameters in birds: a meta-analysis

Although melanin is the most common pigment in animal integuments, the adaptive function of variation in melanin-based coloration remains poorly understood. The individual fitness returns associated with melanin pigments can be variable across species as these pigments can have physical and biological protective properties and genes involved in melanogenesis may vary in the intensity of pleiotropic effects. Moreover, dark and pale coloration can also enhance camouflage in alternative habitats and melanin-based coloration can be involved in social interactions. We investigated whether darker or paler individuals achieve a higher fitness in birds, a taxon wherein associations between melanin-based coloration and fitness parameters have been studied in a large number of species. A meta-analysis showed that the degree of melanin-based coloration was not significantly associated with laying date, clutch size, brood size, and survival across 26 species. Similar results were found when restricting the analyses to non-sexually dimorphic birds, colour polymorphic and monomorphic species, in passerines and non-passerines and in species for which inter-individual variation in melanism is due to colour intensity. However, eumelanic coloration was positively associated with clutch and brood size in sexually dimorphic species and those that vary in the size of black patches, respectively. Given that greater extent of melanin-based coloration was positively associated with reproductive parameters and survival in some species but negatively in other species, we conclude that in birds the sign and magnitude of selection exerted on melanin-based coloration is species- or trait-specific.

A Modulated Closed Form solution for Quantitative Susceptibility Mapping - A thorough evaluation and comparison to iterative methods based on edge prior knowledge.

The aim of this study is to perform a thorough comparison of quantitative susceptibility mapping (QSM) techniques and their dependence on the assumptions made. The compared methodologies were: two iterative single orientation methodologies minimizing the l2, l1TV norm of the prior knowledge of the edges of the object, one over-determined multiple orientation method (COSMOS) and anewly proposed modulated closed-form solution (MCF). The performance of these methods was compared using a numerical phantom and in-vivo high resolution (0.65mm isotropic) brain data acquired at 7T using a new coil combination method. For all QSM methods, the relevant regularization and prior-knowledge parameters were systematically changed in order to evaluate the optimal reconstruction in the presence and absence of a ground truth. Additionally, the QSM contrast was compared to conventional gradient recalled echo (GRE) magnitude and R2* maps obtained from the same dataset. The QSM reconstruction results of the single orientation methods show comparable performance. The MCF method has the highest correlation (corrMCF=0.95, r(2)MCF =0.97) with the state of the art method (COSMOS) with additional advantage of extreme fast computation time. The l-curve method gave the visually most satisfactory balance between reduction of streaking artifacts and over-regularization with the latter being overemphasized when the using the COSMOS susceptibility maps as ground-truth. R2* and susceptibility maps, when calculated from the same datasets, although based on distinct features of the data, have a comparable ability to distinguish deep gray matter structures.

Development of an optimized methodology for tensile testing of carbon steels in hydrogen environment

The study was performed at OCAS, the Steel Research Centre of ArcelorMittal for the Industry market. The major aim of this research was to obtain an optimized tensile testing methodology with in-situ H-charging to reveal the hydrogen embrittlement in various high strength steels. The second aim of this study has been the mechanical characterization of the hydrogen effect on hight strength carbon steels with varying microstructure, i.e. ferrite-martensite and ferrite-bainite grades. The optimal parameters for H-charging - which influence the tensile test results (sample geometry type of electrolyte, charging methods effect of steel type, etc.) - were defined and applied to Slow Strain Rate testing, Incremental Step Loading and Constant Load Testing. To better understand the initiation and propagation of cracks during tensile testing with in-situ H-charging, and to make the correlation with crystallographic orientation, some materials have been analyzed in the SEM in combination with the EBSD technique. The introduction of a notch on the tensile samples permits to reach a significantly improved reproducibility of the results. Comparing the various steel grades reveals that Dual Phase (ferrite-martensite) steels are more sensitive to hydrogen induced cracking than the FB (ferritic-bainitic) ones. This higher sensitivity to hydrogen was found back in the reduced failure times, increased creep rates and enhanced crack initiation (SEM) for the Dual Phase steels in comparison with the FB steels.

Optimal exponent heat balance and refined integral methods applied to Stefan problems

When using a polynomial approximating function the most contentious aspect of the Heat Balance Integral Method is the choice of power of the highest order term. In this paper we employ a method recently developed for thermal problems, where the exponent is determined during the solution process, to analyse Stefan problems. This is achieved by minimising an error function. The solution requires no knowledge of an exact solution and generally produces significantly better results than all previous HBI models. The method is illustrated by first applying it to standard thermal problems. A Stefan problem with an analytical solution is then discussed and results compared to the approximate solution. An ablation problem is also analysed and results compared against a numerical solution. In both examples the agreement is excellent. A Stefan problem where the boundary temperature increases exponentially is analysed. This highlights the difficulties that can be encountered with a time dependent boundary condition. Finally, melting with a time-dependent flux is briefly analysed without applying analytical or numerical results to assess the accuracy.

Simulation-based systematic review of imatinib population pharmacokinetics and PK-PD relationships in chronic myeloid leukemia (CML) patients

Objectives: Several population pharmacokinetic (PPK) and pharmacokinetic-pharmacodynamic (PK-PD) analyses have been performed with the anticancer drug imatinib. Inspired by the approach of meta-analysis, we aimed to compare and combine results from published studies in a useful way - in particular for improving the clinical interpretation of imatinib concentration measurements in the scope of therapeutic drug monitoring (TDM). Methods: Original PPK analyses and PK-PD studies (PK surrogate: trough concentration Cmin; PD outcomes: optimal early response and specific adverse events) were searched systematically on MEDLINE. From each identified PPK model, a predicted concentration distribution under standard dosage was derived through 1000 simulations (NONMEM), after standardizing model parameters to common covariates. A "reference range" was calculated from pooled simulated concentrations in a semi-quantitative approach (without specific weighting) over the whole dosing interval. Meta-regression summarized relationships between Cmin and optimal/suboptimal early treatment response. Results: 9 PPK models and 6 relevant PK-PD reports in CML patients were identified. Model-based predicted median Cmin ranged from 555 to 1388 ng/ml (grand median: 870 ng/ml and inter-quartile range: 520-1390 ng/ml). The probability to achieve optimal early response was predicted to increase from 60 to 85% from 520 to 1390 ng/ml across PK-PD studies (odds ratio for doubling Cmin: 2.7). Reporting of specific adverse events was too heterogeneous to perform a regression analysis. The general frequency of anemia, rash and fluid retention increased however consistently with Cmin, but less than response probability. Conclusions: Predicted drug exposure may differ substantially between various PPK analyses. In this review, heterogeneity was mainly attributed to 2 "outlying" models. The established reference range seems to cover the range where both good efficacy and acceptable tolerance are expected for most patients. TDM guided dose adjustment appears therefore justified for imatinib in CML patients. Its usefulness remains now to be prospectively validated in a randomized trial.

Dynamic stackelberg game with risk-averse players: optimal risk-sharing under asymmetric information

The objective of this paper is to clarify the interactive nature of the leader-follower relationship when both players are endogenously risk-averse. The analysis is placed in the context of a dynamic closed-loop Stackelberg game with private information. The case of a risk-neutral leader, very often discussed in the literature, is only a borderline possibility in the present study. Each player in the game is characterized by a risk-averse type which is unknown to his opponent. The goal of the leader is to implement an optimal incentive compatible risk-sharing contract. The proposed approach provides a qualitative analysis of adaptive risk behavior profiles for asymmetrically informed players in the context of dynamic strategic interactions modelled as incentive Stackelberg games.

Molecular pathology of colorectal cancer.

Colorectal cancer (CRC) is one of the most intensively studied cancer types, partly because of its high prevalence but also because of the existence of its precursor lesions, tubular or villous adenomas, and more recently (sessile) serrated adenomas, which can be detected endoscopically and removed. The morphological steps in the adenoma-carcinoma sequence have been elucidated at a molecular level, which has been facilitated by identification of the genes responsible for familial intestinal cancer. However, apart from early detection of familial forms of CRC and its use in genetic counseling, until recently such detailed molecular knowledge has had little impact on clinical management of the disease. This has dramatically changed in the last decade. With drugs specifically targeting the epidermal growth factor receptor (EGFR) having been shown effective in CRC, mechanisms responsible for resistance have been explored. The finding that KRAS mutated cancers do not respond to anti-EGFR treatment has had a profound impact on clinical management and on molecular diagnostics of CRC. Additional genetic tests for mutations in NRAS, BRAF and PIK3CA contribute to determining who to treat, and others will follow. New therapies effective in patients with advanced CRC are under investigation. Remaining burning questions for optimal management are which patients will relapse after resection of the primary tumor and which patients will respond to the standard 5FU-oxaliplatin adjuvant treatment regimen. Predictive tests to address these issues are eagerly awaited. New classifications of CRC, based on molecular parameters, are emerging, and we will be confronted with new subtypes of CRC, for which the definition is based on combinations of gene expression patterns, chromosomal alterations, gene mutations and epigenetic characteristics. This will be instrumental in designing new approaches for therapy but will also be translated into molecular diagnostics. Both will contribute to improved clinical management of CRC.

Protein recovery, separation and purification: selection of optimal techniques using an expert system

The paper discusses the utilization of new techniques ot select processes for protein recovery, separation and purification. It describesa rational approach that uses fundamental databases of proteins molecules to simplify the complex problem of choosing high resolution separation methods for multi component mixtures. It examines the role of modern computer techniques to help solving these questions.

Thermal effect on the life-cycle parameters of the medically important freshwater snail species Lymnaea (Radix) luteola (Lamarck)

The snails Lymnaea (Radix) luteola exhibited marked variations in growth, longevity, and attaining sexual maturity at different temperatures and diets. At 10°C, irrespective of foods, pH and salinity of water, the snails had minimum life span, maximum death rate and lowest growth rate. At 15°C, the growth rate was comparatively higher and the snails survived for a few more days. But at these temperatures they failed to attain sexual maturity. Snails exposed to pH 5 and 9 at 20°, 25°, 30°, 35°C and room temperatures (19.6°-29.6°C); to 0.5, 1.5 and 2.5 NaCl ‰ at 20° and 35ºC; to 2.5 NaCl ‰ at 25°C and room temperatures failed to attain sexual maturity. The snails exposed to pH 7 and different salinity grades at 20°, 25°, 30°, 35°C and room temperatures became sexually mature between 25-93 days depending upon the type of foods used in the culture.

Early broncoconstriction in anesthetized sheep: a simplified experimental model of asthma

Résumé Cette étude décrit un modèle expérimental de bronchoconstriction précoce induite par aérosolisation d'un extrait d'Ascaris suum chez des moutons anesthésiés par de l'isoflurane et ventilés mécaniquement. Dix moutons adultes ont été anesthésiés et ventilés mécaniquement puis ont été exposés à un stimulus bronchoconstrictif sous forme d'un aérosol d'extrait d'Ascaris suum durant 25 minutes. Tous les moutons ont été exposés deux fois à huit semaines d'intervalle à ce même stimulus. Les échanges gazeux ainsi que les paramètres respiratoires ont été mesurés régulièrement durant la période d'aérosolisation ainsi que durant les 60 minutes suivantes. A la fin de la période d'aérosolisation, une augmentation significative (p<0.05) des pressions de crête (+114%) et de plateau (+148%), de la résistance expiratoire (+93%) et de la pression partielle artérielle de gaz carbonique PaCO2 (+25%) a été constatée, de même qu'une diminution significative (p<0.05) de la compliance respiratoire (-41 %) et de la pression partielle artérielle d'oxygène PaO2 (-49%). Ces modifications sont restées stables durant toute la période d'observation. Ce modèle expérimental animal de bronchoconstriction offre de nombreux avantages : la stabilité hémodynamique et le confort de l'animal sont améliorés et la réaction de stress est inhibée. Il permet de plus une distribution optimale de l'antigène respiratoire et finalement évite l'utilisation d'un pléthysmographe corporel. Abstract This study describes a simplified experimental model of early bronchoconstriction induced by aerosolization of Ascaris suum extract in isoflurane-anesthetized and mechanically ventilated sheep. Ten adult sheep were anesthetized, mechanically ventilated and then challenged with an aerosol of Ascaris suum extract during 25 minutes. All of them were challenged twice at eight weeks intervals. During the bronchoconstrictive challenges and the following sixty minutes, gas exchange was measured and respiratory mechanics parameters computed from a lung mechanics calculator. At the end of the challenge, a significant increase (p<0.05) was observed in peak (+114%) and plateau (+148%) pressures, expiratory resistance (+93%) and PaCO2 (+25%) along with a significant decrease (p<0.05) in respiratory compliance (-41 %) and PaO2 (-49%). These changes remained stable throughout the 60 minutes study period. This model offers several advantages: hemodynamic stability and animal welfare are improved and the stress response is blunted. It allows an optimal distribution of the antigen and finally avoids the need of a body plethysmograph.