The distribution of zinc, cadmium, copper and iron in seawater of the Iceland-Faroe Ridge area

During the International ICES Expedition "Overflow '73" a total of 174 samples from 18 stations were collected by R. V. "Meteor" in the waters of the Iceland-Faroe Ridge area. They were filtered on board ship (through 0.4 mym "Nuclepore" filters), then stored in 500 cm**3 quartz bottles (at -20 °C) and analyzed in air-filtered laboratories on land for zinc and cadmium by means of the differential pulse anodic stripping voltammetry technique and copper and iron by flameless atomic absorption spectrometry. The overall averages of 1.9 myg Zn l**-1, 0.07 myg Cd l**-1, 0.5 myg Cu l**-1 and 0.9 myg Fe l**-1 are in good agreement with recent "baseline" studies of open-ocean waters. The mixture of low salinity water masses from the North Iceland Shelf/Arctic Intermediate Waters seem to maintain distinctly lower concentration of Cd, Cu and Fe than the waters from the North Atlantic and the Norwegian Sea where quite similar mean values are found. There is only little evidence for the assumption that overflow events on the ridge are influencing the concentrations of dissolved metals in the near-bottom layers.

(Table 2) Concentrations of dissolved Zn, Cd, Pb, and Cu in waters of the Baltic Sea

A method of determination of low concentrations of zinc, cadmium, lead, and copper dissolved in seawater and interstitial water with use of inversion voltammetry with AC solution conditions is described. The optimum conditions for measurements with accumulation on a mercury-film electrode with a silver substrate are presented. Detection limit is 0.2 ?g/l for zinc and 0.05 ?g/l for cadmium, lead, and copper. Large number of determinations can be carried out during expeditions at natural pH of seawater containing these four metals.

Geochemistry at DSDP Leg 74 Holes

Clay mineralogical and inorganic geochemical data from the Campanian to the Pleistocene provide information bearing on the evolution of both continental and marine paleoenvironments in the Walvis Ridge area. (1) Alteration processes of basalts occurred under subaerial conditions during the Campanian and Maestrichtian and were virtually absent in deeper marine environments. (2) Strong tectonic effects were present during the Campanian and persisted until the early Eocene. (3) Subsidence of this part of the Walvis Ridge became important during the late Maestrichtian and continued into the Paleocene and Eocene. (4) The influence of global climatic cooling was evident from the late Eocene on. (5) Modification of oceanic circulation and the increasing influence of surface and deep water masses on the sedimentation characterized the Cenozoic.

Concentration of trace elements in samples of sea water determined by use of two methods of concentrating

A device and a specific procedure for simultaneous concentration of trace ele¬ments from sea water by co-precipitating them in precipitate of magnesium hydroxide obtained by electrolytic alkalization of samples in a two-chamber electrolyzer are described. Analyses of sea water samples for zinc, iron, copper, nickel and lead demonstrate that the method produces a thousand-fold concentration and gives results that agree well with those obtained by extractive concentration using diethyldithiocarbamate and 8-hydroxyquinoline in chloroform. Extracts were analyzed by flame atomic absorption. Correlation coefficients of results obtained with use of these two methods of concentration were 0.76-0.87 for zinc, iron, and copper at confidence levels of 0.05-0.07. Average zinc and iron concentrations determined by the method differed by less than 10%.

Geochemistry on manganese deposit from the Median Valley of the Mid-Atlantic Ridge

A manganese oxide crust from an extensive deposit in the median valley of the Mid-Atlantic Ridge was found to be unusually high in manganese (up to 39.4% Mn), low in Fe (as low as 0.01% Fe), low in trace metals and deficient in Th230 and Pa231 with respect to the parent uranium isotopes in the sample. The accumulation rate is 100 mm to 200 mm/10 million year, or 2 orders of magnitude faster than the typical rate for deep-sea ferromanganese deposits. The rapid growth rate and unusual chemistry are consistent with a hydrothermal origin or with a diagenetic origin by manganese remobilized from reduced sediments. Because of the association with an active ridge, geophysical evidence indicative of hydrothermal activity, and a scarcity of sediment in the sampling area, we suggest that a submarine hot spring has created the deposit.

Geochemistry at DSDP Site 76-533

Bulk X-ray mineralogy of 47 hemipelagic mud and clay samples from the Blake Outer Ridge has revealed that the sediments contain low magnesian calcite, calcian dolomite, ferroan dolomite, and magnesian siderite. Dolomite and siderite are authigenic and occur as rhombohedrons scattered through the sediments, whereas calcite is mostly biogenic. Pliocene dolomitic lenses are made up of interlocking polyhedral grains of ferroan dolomite. The contents of authigenic dolomite and siderite are 3 to 8% in carbonate sediments and 70 to 89% in dolomitic lenses. Dolomite occurs largely in the cores above 192 m sub-bottom depth, whereas siderite occurs in the cores below 87 m. The distribution and occurrence of dolomite and siderite have determined the diagenetic zonation of carbonates as Zone I (dolomitic zone, top-90 m), Zone II (transition zone, 90-180 m), and Zone III (sideritic zone, 180 m-bottom). Measurements of major and minor elements in the untreated total sediment samples and the insoluble residues after digestion in acid-reducing solution have revealed that the soluble fraction concentrates carbonates and ferromanganese associations (Ca, Mg, Sr, Fe, and Mn). Typical "hydrogenous elements" (Co, Cu, Ni, and V) are more concentrated in the insoluble residues rather than in the soluble fraction; the concentrations of these four elements are low and comparable to modern offshore mud, probably because the Site 533 sediments were deposited at a high rate of sedimentation. The contents of Fe2O3 and MnO are somewhat high for rapidly accumulated mud, particularly in the Pliocene sediments (8.09 and 0.26%, respectively, on a Carbonate-free basis). The high Fe and Mn contents are mainly due to the high contribution of the leacheable nonlithogenous fraction; leacheable Fe and Mn originate in the ferromanganese oxide accumulated on the seafloor. Only a small amount of ferric oxide was converted to iron sulfide in the surficial part of Zone I. Most ferromanganese oxide was reduced and precipitated as ferroan dolomite and magnesian siderite in Zones II and III under high alkalinity and high pH conditions in the organic-matter-rich sediments. Fe2+ and Mn2+ in the deeper sediments beneath Zone III possibly migrated upward and concentrated as siderite in Zone III, hence resulting in high contents of Fe and Mn in the Pliocene sediments. Analysis of carbonate zonation on the Blake Outer Ridge has revealed that the zonation is subparallel to the bedding plane rather than to the present seafloor. The sediments at Site 103 on the flank region of the Ridge are lacking Zone I and most of Zone II, probably the result of erosion of the most of the Pleistocene and Pliocene sediments by the enhanced bottom currents during the Pleistocene.