Avaliação genética de seleções e híbridos de limões cravo, volkameriano e rugoso como porta-enxertos para laranjeiras Valência na presença da morte súbita dos citros

Este estudo teve como objetivo realizar a avaliação genética da produção de frutos, eficiência produtiva e altura de laranjeiras Valência (Citrus sinensis) enxertadas em seleções e híbridos dos limões Cravo (C. limonia), Volkameriano (C. volkameriana) e Rugoso (C. jambhiri), em área endêmica para morte súbita dos citros (MSC). Foram avaliados 36 genótipos desses porta-enxertos, representados por cinco plantas cada, avaliados em cinco safras, do terceiro ao sétimo ano após o plantio. Sete dos genótipos avaliados apresentaram plantas com sintomas de MSC até o sétimo ano: Rangpur Otaheite orange 12901 (859), Rangpur Red Lime D.33.30 (866), Limão-Cravo EEL (871), Rangpur Borneo red (874), Citrus kokhai (1649), Limão-Rugoso 58329 (1655) e Limão- Cravo x Swingle B (1695). Para os genótipos que não manifestaram sintomas da doença, foram estimados parâmetros genéticos e fenotípicos e realizada a predição de valores genéticos dos indivíduos, visando à seleção e ao melhoramento genético para as características citadas, empregando-se o método REML/BLUP (máxima verossimilhança restrita/melhor predição linear não viciada). A análise de produção de frutos de cinco safras mostrou acurácia seletiva de 84,59%, tornando-se desnecessária a avaliação de maior número de safras. A seleção dos sete melhores genótipos proporcionou ganhos genéticos de 11,5% na produção de frutos, enquanto a do melhor genótipo conferiu ganho genético de 16,3%. As maiores médias genéticas preditas (>70,0 kg.pl-1) para produção de frutos foram obtidas pelos genótipos Limão-Cravo- Ipanema (1522), Santa- Bárbara-Red- Lime (884), Limão- Cravo- Limeira (863), Limão- Cravo- Taquaritinga (869), Limão- Rugoso- do -Cabo (1643), Rangpur- Rose Lime (868) e Limão- Cravo- da- Califórnia (1467). Já a acurácia seletiva da eficiência produtiva, para quatro colheitas, foi 77,4%. Para este caráter, as maiores médias genéticas (>8,0 kg.m-3) foram dos genótipos Rangpur- Lime x Trifoliata 3810 (1648), Rangpur- Lime x Trifoliata 5320 (1644), Limão- Cravo x Citrange- Carrizo (1524), Citrus pennivesiculata (880), Limão- Cravo x Trifoliata- Swingle A (1707), Rangpur- Rose- Lemon 124684 (864), Rangpur- Red -Lime D33.47 (867) e Limão- Cravo -Ipanema (1522). Dentre os 10 melhores genótipos para produção de frutos e para eficiência produtiva, apenas três são coincidentes: Rangpur- Rose -Lime (868), Citrus pennivesiculata (880) e Limão- Cravo-Ipanema (1522).

Lipeäkierron kemiallisesti parhaat käytännöt

Diplomityön tavoitteena oli kartoittaa kemiallisesti parhaita käytäntöjä sellutehtaiden kemikaalien talteenottoprosessissa. Kirjallisuudesta ei löytynyt lipeäkiertoon liittyvää kemiallista tietoutta. Laiteteknisten ratkaisujen kautta yritettiin saada selville parhaat käytännöt. Teoriaosassa on myös käsitelty lipeäkierrossa esiintyvien vierasaineiden lähteitä, rikastumista ja poistumista prosessista. Työ tehtiin Stora Enson Suomessa sijaitseville tehtaille. Kokeellisessa osassa on suoritettu tehtailta saadun materiaalin perusteella tunnuslukujen laskentaa sekä PCA-analyysin teko. Työssä tarkastelualueena on lipeäkierto liuottajasta meesauuniin. Kaukopäässä on käytössä lipeäkierrossa kaksi lipeälinjaa ja muilla tehtailla vain yksi. Saatujen tunnuslukujen perusteella tehtaille on annettu pisteitä nollasta viiteen. Viisi pistettä on saanut parhaan arvon saanut tehdas ja nolla pistettä kaukana parhaasta arvosta olevat. Tunnuslukuja on valittu 14 ja edellä esitetyllä tavalla pisteytettynä on parhaaksi tehtaaksi saatu Kaukopään 1-lipeälinja ja huonoin on Kemijärvi. Huomioitavaa on Kaukopään 2-lipeälinjan sijoittuminen vasta neljänneksi, vaikka lipeälinjoilla on valkolipeän ja meesan käsittelyssä yhteiset syöttösäiliöt. PCA-analyysin perusteella havaittiin, että kuukausikeskiarvoja käytettäessä tulokset tasoittuvat verrattuna päiväarvoilla tehtyyn analyysiin. Analyysi osoittaa, että tehtailla lipeäkierto ei ole täysin hallinnassa. Tämä ilmenee suurina objektien liikkeinä kuvissa. Päiväarvoilla analyysi tehtiin vain Oulun tehtaalle. Tarkastelussa valittiin kuukauden mittainen ajanjakso niin hyvää kuin huonoakin jaksoa. Mallien selitysasteista voidaan nähdä eroja hyvän ja huonon jakson välillä. Tämä ilmenee niin, että hyvän jakson mallin selitysaste on korkeampi kuin huonon jakson. Objektien sijoittuminen kuvissa on myös erilainen. Hyvän jakson aikana objektit ovat pieninä ryhminä, kun huonon jakson objektit ovat hajonneet yksittäisiksi arvoiksi ja päivien väliset erot ovat suuret.

Feeding habits of Ophichthus rufus (Anguilliformes, Ophichthidae) in the western Mediterranean

Ophichthus Rufus is a Mediterranean benthic fish with nocturnal habits. It lives in sand or mud bottoms at depths between 50 and 150m. Until now, nothing about its feeding habits was known. Stomach contents of 689 individuals, collected between 1985 and 1987, were analysed. The diet is basically composed of benthic organisms, among which the decapods processa canaliculata and Alpheus glaber and the teleost fish Callionymus maculatus are prominent. Young of both sexes and adult males have a euryphagic carnivorous diet, whereas adult females are closer to a stenophagic piscivorous diet

Factors Affecting Filterability

In this thesis the factors affecting lime mud filterability were studied. In the literature part there is information about recausticizing process, lime mud properties and filterability, and general filtration theory. In the experimental part the properties of lime mud particles and the properties of lime mud filter cake were investigated and the behavior of lime mud precoat was studied. The experiments were also carried out with R-PCC (rhombohedral precipitated calcium carbonate). The filtration and precoat studies were performed with a laboratory scale pressure filter. The pressure differences used were between 0.25-1.50 bars. Six different lime mud samples with varying amount of impurities and two R-PCC samples were used in the experiments. The average specific cake resistance of different lime mud samples varied quite extensively. The most influential factor affecting the lime mud filterability and dry solids content was found to be silica content. As the lime mud contained silica, the average specific cake resistance was high and the lime mud dryness was low. If the lime mud samples containing silica were not taken into account, the smaller the mean particle size, the higher the average specific cake resistance of the lime mud. The R-PCC had also a high average specific cake resistance, which was because of small particle size. In addition, the pressure difference affected the average specific cake resistance of some lime mud samples. In those cases lime mud was compressible material. During the precoat experiments the lime mud samples having the largest mean particle sizes, compressed. However, the average specific cake resistances of the filtration and precoat part were approximately the same magnitude. A brief displacement by air did not affect the behavior of the precoat. Instead, vibration and a brief but relatively great change in pressure difference had a slight influence.

Designing a new type of support for rotary kilns

Lime kiln is used as a part of the modern kraft pulp process in order to produce burnt lime from lime mud. This rotating kiln is supported by support rollers, which are traditionally supported by journal bearings. Since the continuous growth in the production of pulp mills requires larger lime kilns, the traditional bearing construction has become unreliable. The main problem especially involves the running-in phase of the bearings. In the present thesis, a new type of support roller was developed by using the systematic approach of machine design. Structural analysis was conducted on the critical parts of the selected structure by the finite element method. The operation of hydrodynamic bearings was examined by analytical methods. As a result of this work, a new type of support for rotating kilns was designed, which is more reliable and easier to service. A new support roller geometry is described, which pro¬vides for significant cost savings.

Estudo sobre a utilização da lama vermelha para a remoção de corantes em efluentes têxteis

Red mud is the principal residue of the alumina (Al2O3) industry. Generated during the Bayer process, it is characterized by strong alkalinity and ion exchange. Iron oxides are the principal component (30 to 60%). Annually millions of tons of red mud are generated in the world. Red mud disposal is responsible for a large part of the cost of alumina production. On the other hand, textile industry wastewaters containing dyes have a great impact on the environment and on human health. In this paper the possibility of applying red mud for the removal of dyes was investigated by two processes: adsorption and degradation by the Fenton reagent.

Adsorção competitiva de inibidor de corrosão usado em poços de perfuração de petróleo sobre aço, esmectita e arenito

A commercial corrosion inhibitor used in petroleum production was characterized by means of infrared spectroscopy and energy dispersive spectroscopy (EDS). Predicting the adsorption behavior of corrosion inhibitor onto steel, sandstone and esmectite is the key to improve working conditions. In this study, the adsorption kinetics of inhibitor formulations in HCl 15% or in Mud Acid (HCl 13,5% and ammonium bifluoride) onto steel, sandstone and esmectite was determined by means of spectrophotometry. Kinetic parameters indicated that adsorption of inhibitor in the presence of bifluoride was favored. Moreover, the adsorption constant rate was the largest when the substrate was esmectite.

Adsorção do corante Reativo Azul 19 em solução aquosa por lama vermelha tratada quimicamente com peróxido de hidrogênio

Adsorption of Reactive Blue 19 dye onto activated red mud was investigated. Red mud was treated with hydrogen peroxide (LVQ) and heated at both 400 ºC (LVQ400) and 500 ºC (LVQ500). These samples were characterized by pH, specific surface area, point of zero charge and mineralogical composition. Adsorption was found to be significantly dependent on solution pH, with acidic conditions proving to be the most favorable. The adsorption followed pseudo-second-order kinetics. The Langmuir isotherm was the most appropriate to describe the phenomenon of dye removal using LVQ, LVQ400 and LVQ500, with maximum adsorption capacity of 384.62, 357.14 and 454.54 mg g-1, respectively.

Remoção do ácido mefenâmico em água utilizando carvão ativado em pó, lama vermelha e oxidação com cloro

The use of activated carbon powder (ACP), red mud and oxidation with chlorine to remove mefenamic acid in water are described, aimed at their application as a complement to sewage treatment processes in Brazil. A study on the behavior of mefenamic acid in water was performed by evaluating its dissolution for different concentrations and times. Subsequently, the optimal conditions for removal of mefenamic acid were investigated using ACP adsorption at different pH and concentrations, and red mud adsorption using different pH. The utilization of different pH and times was also investigated to establish the ideal conditions for chemical oxidation of the drug. Among the different conditions studied, the best condition for drug removal by ACP and red mud were 100% and 96%, respectively, while the best condition for chemical oxidation occurred using solutions with pH 6 and 7 and reaction times of 30 and 60 minutes.

Natural colonization of leaves of 'Pêra' sweet orange and related varieties by Guignardia citricarpa

The purpose of this research was to evaluate the differences in the colonization and production of structures in the leaves of 'Pêra' sweet orange (Citrus sinensis) clones and related varieties by Guignardia citricarpa. The natural colonization and the production of reproductive structures in the leaves and in vitro of ten 'Pêra' sweet orange was quantified in the following clones: Bianchi, Dibbern C.V., EEL, IAC 2000, Olímpia 15161, Premunizada 1212, Premunizada 1743/82, R. Gullo 1569/244, R. Gullo 1570/246 and Vimusa; and in five related varieties: Redonda C.N, Ovale 968, Ovale San Lio 969, Lamb Summer and Corsa Tardia. The quantification of the colonization density of G. citricarpa in the leaves was obtained through isolation. Incidence and colonization density (cm²) were calculated for each clone. The production of reproductive structures was accomplished through the moistening and drying process of the leaves. The incidence (percentage of affected leaves) and the leaf surface percentage occupied by the reproductive fungus structures were quantified. The in vitro production of reproductive structures was accomplished in water-agar medium. The number of immature and total reproductive fungus structures (cm²), and the percentage of picnidia with liberation of spores were quantified. Significant differences were not observed among clones related to the colonization of the leaves. But there were differences in the induction experiments, i.e., in the leaf surface percentage occupied by the reproductive fungus structures and the in vitro production of reprodutive fungus structures.

Alternative liquid biofuels for lime kilns

Causticizing plant is an important part of kraft pulp mill. It uses green liquor from recovery boiler as a raw material and consumes lime to produce white liquor, which is an important chemical used in pulping. Lime kiln is a part of the causticizing process. It is used to convert lime mud, a by-product obtained from the causticizing back to lime in high temperatures. This conversion requires a lot of energy. The most common fuels used as energy source for lime kiln are heavy fuel oil and natural gas. In a modern pulp mill lime kiln is the only user of significant amount of fossil fuels. Replacing fossil fuels with biofuels can have prominent economical and environmental benefits. Interest in using biofuels as energy source of lime kiln has become a worldwide issue in the recent years. However fuels used for lime kiln have a lot of certain requirements. The purpose of this work is to study the required characteristics from liquid fuels used in pulp mill lime kiln and to map suitable liquid biofuels already available in the markets. Also taxation of liquid biofuels compared to heavy fuel oil in Finland, Sweden and Germany is shortly introduced.

The Sedimentology, Ichnology and Hydrogeochemistry of the Late Miocene, Marginal Marine, Upper Pebas and Nauta Formations, Amazonian Foreland Basin, Peru

This thesis includes detailed sedimentological and ichnological studies on two geological units: the Pebas Formation, with a special focus in its informal upper member, and the Nauta Formation. Both formations were deposited during the Miocene in Northeastern Peruvian Amazonia, in the Amazon retroarc foreland basin. The Pebas and Nauta successions mainly consist of non-consolidated, clastic sedimentary deposits arranged into sand- to mud-dominated heterolithic successions, which can be upward-coarsening to upward-fining. Sediments in both the Pebas and Nauta successions range from mud to fine- to medium-grained sand. The main facies observed were 1) mud-dominated horizontal heterolithic couplets; 2) rooted brownish mud; 3) lenticular, mud-draped, cross-stratified sand; 4) mud- to sand-dominated, inclined heterolithic stratification; 5) sand-dominated horizontal heterolithic couplets; and 6) mud-draped, trough cross-stratified sand. Locally, tidal rhythmites were documented. The facies are interpreted as: 1) muddy, shallow, subaqueous flats/shoals; 2) palaeosols; 3) secondary tidal channels or run-off creeks; 4) tidally influenced point bars; 5) shoreface deposits; and 6) subtidal compound dunes. Thalassinoides-dominated Glossifungites ichnofacies, low-diversity expressions of the Skolithos ichnofacies and depauperate suites consisting of elements common to the Cruziana ichnofacies strongly indicate brackish-water conditions. However, continental trace fossil assemblages, with possible elements common to the Scoyenia ichnofacies, have also been identified. In addition to the palaeoenvironmental study, a local hydrogeochemical characterisation of the Pebas and Nauta formations was also conducted. The geochemistry of the groundwaters reflects the characteristics and the soil geochemistry of the geological formations studied. The Pebas formation has low hardness, acid to neutral waters, whereas the upper Pebas has high hardness, acid to neutral waters. In both units, the arsenic content is locally high. The Nauta formation has low hardness acid groundwaters. A regional review of the Pebas and Nauta formations placed the local observations into a continental perspective and suggests that the whole Pebas-Nauta system was a probably shallow (some tens of metres at maximum), brackish- to freshwater, tidally-influenced epicontinental embayment with a probable semi-diurnal to mixed tidal regime and a microtidal range, surrounded by continental environments such as forest floors, lagoons, rivers and their flood plains, and lakes.

Ultrasonographic and radiographic determination of egg development of jurarás (Kinosternon scorpioides) in captivity

Kinosternon scorpioides (Linnaeus, 1766), with its common name of jurará, is a quite variable species of turtles, and many different names have been applied to populations throughout its range. Currently, however, four subspecies are considered valid as K. scorpioides arises from southern Panama over most of northern South America and is found in Ecuador, northern Peru, southern Bolivia, northern Argentina, eastern Guyana and Brazil. Thus, an ultrasonographic and radiographic study was performed in order to describe the morphology and development of eggs of 20 female jurará mud turtles K. scorpioides, from September 2005 to August 2006. In the first month, the ovarian cycle was characterized by absence of vitellogenic follicles, atresic follicles or oviduct eggs. From October 2005 to March 2006 on, ultrasonographic scanning allowed to establish the growing vitellogenic follicles. Vitellogenic follicles were observed with spherical to ovoid shapes, with a surrounding echogenic yolk, a nonechogenic albumin layer, and a high echogenic shell. The oviduct eggs were identified by radiography just 180 days after beginning the experiment, when the shell became enough mineralized to impress the radiographic film. This experiment allowed to obtain by means of the 7.5 MHz linear probe images with adequate resolution and penetration for visualization of follicles. Successive ultrasonographic examinations of 20 K. scorpioides females allowed to access initial stages of vitellogenic follicles and oviduct eggs, and radiographic examination revealed to be an easy technique to assess oviduct eggs and to allow evaluation of egg development in jurarás, from 6 months on.

Morphological aspects of the ovaries of turtle Kinosternon scorpioides raised in captivity

The swear turtle "jurará" (Kinosternon scorpioides) is a mud turtle of the Amazon region exposed to disordering capture in the rural areas of Maranhão, Brazil. Despite its popularity in these areas, little meaningful information regarding the reproductive morphology is currently available, fact that impedes the adoption of policies for preservation of the species. To obtain more information, we studied the ovarian morphology adult jurará females kept in captivity by morphological and morphometric analysis in the dry and rainy season. The results revealed that all females were sexually mature and were in a vitellogenic period. The ovaries are two irregular structures composed by follicles in different stages of development (primary, secondary and tertiary) scattered in a stroma of loose connective highly vascularized tissue. The ovary weight was 6.25±4.23g and 2.27±1.42g, for the right and left one respectively. The gonadosomatic indexes were 2.06% for the dry season and 1.79% for the rainy season. The average of the follicles was 29.83 units per ovary. Microscopically, the mature ovaries revealed a basal layer composed by four cellular layers: the inner and outer theca, stratum granulosum with perivitelline membrane and zona radiata with vitelline membrane. No significant differences were observed in the ovaries either in the dry or wet period.