Cosmic shear requirements on the wavelength dependence of telescope point spread functions

Cosmic shear requires high precision measurement of galaxy shapes in the presence of the observational point spread function (PSF) that smears out the image. The PSF must therefore be known for each galaxy to a high accuracy. However, for several reasons, the PSF is usually wavelength dependent; therefore, the differences between the spectral energy distribution of the observed objects introduce further complexity. In this paper, we investigate the effect of the wavelength dependence of the PSF, focusing on instruments in which the PSF size is dominated by the diffraction limit of the telescope and which use broad-band filters for shape measurement. We first calculate biases on cosmological parameter estimation from cosmic shear when the stellar PSF is used uncorrected. Using realistic galaxy and star spectral energy distributions and populations and a simple three-component circular PSF, we find that the colour dependence must be taken into account for the next generation of telescopes. We then consider two different methods for removing the effect: (i) the use of stars of the same colour as the galaxies and (ii) estimation of the galaxy spectral energy distribution using multiple colours and using a telescope model for the PSF. We find that both of these methods correct the effect to levels below the tolerances required for per cent level measurements of dark energy parameters. Comparison of the two methods favours the template-fitting method because its efficiency is less dependent on galaxy redshift than the broad-band colour method and takes full advantage of deeper photometry.

Challenges in Radiative Transfer Modeling - W3 IRS5

By modeling the spectral energy distribution (SED) of the W3 IRS5 high-mass star formation region and matching this model to observed data, we can constrain the physical parameters of the basic system geometry and cloud mass distribution. From these parameters, we hope to add to the understanding of high-mass star formation processes. In particular, we hope to determine if the geometries associated with lowmass star formation carry over into the high-mass regime.

Decision Tree Classification Model In Water Supply Network

With the service life of water supply network (WSN) growth, the growing phenomenon of aging pipe network has become exceedingly serious. As urban water supply network is hidden underground asset, it is difficult for monitoring staff to make a direct classification towards the faults of pipe network by means of the modern detecting technology. In this paper, based on the basic property data (e.g. diameter, material, pressure, distance to pump, distance to tank, load, etc.) of water supply network, decision tree algorithm (C4.5) has been carried out to classify the specific situation of water supply pipeline. Part of the historical data was used to establish a decision tree classification model, and the remaining historical data was used to validate this established model. Adopting statistical methods were used to access the decision tree model including basic statistical method, Receiver Operating Characteristic (ROC) and Recall-Precision Curves (RPC). These methods has been successfully used to assess the accuracy of this established classification model of water pipe network. The purpose of classification model was to classify the specific condition of water pipe network. It is important to maintain the pipeline according to the classification results including asset unserviceable (AU), near perfect condition (NPC) and serious deterioration (SD). Finally, this research focused on pipe classification which plays a significant role in maintaining water supply networks in the future.

Modeling Of District Metered Areas With Relatively High Leakage Rate. The Case Study Of Kalipoli’s DMA

The article reviews the modelling of District Metered Areas (DMAs) with relatively high leakage rate. As a generally recognised approach in modelling of leakage does not exist, modelling of leakage by enginners and other researchers usually takes place by dividing the whole leakage rate evenly to all available nodes of the model. In this article, a new methodology is proposed to determine the nodal leakage by using a hydraulic model. The proposed methodology takes into consideration the IWA water balance methodology, the Minimum Night Flow (MNF) analysis, the number of connections related to each node and the marerial of pipes. In addition, the model is illustrated by a real case study, as it was applied in Kalipoli’s DMA. Results show that the proposed model gives reliable results.

Newly Automated System For Integrated Assessment Of The Conditions Of Underwater Gas Pipelines

An underwater gas pipeline is the portion of the pipeline that crosses a river beneath its bottom. Underwater gas pipelines are subject to increasing dangers as time goes by. An accident at an underwater gas pipeline can lead to technological and environmental disaster on the scale of an entire region. Therefore, timely troubleshooting of all underwater gas pipelines in order to prevent any potential accidents will remain a pressing task for the industry. The most important aspect of resolving this challenge is the quality of the automated system in question. Now the industry doesn't have any automated system that fully meets the needs of the experts working in the field maintaining underwater gas pipelines. Principle Aim of this Research: This work aims to develop a new system of automated monitoring which would simplify the process of evaluating the technical condition and decision making on planning and preventive maintenance and repair work on the underwater gas pipeline. Objectives: Creation a shared model for a new, automated system via IDEF3; Development of a new database system which would store all information about underwater gas pipelines; Development a new application that works with database servers, and provides an explanation of the results obtained from the server; Calculation of the values MTBF for specified pipelines based on quantitative data obtained from tests of this system. Conclusion: The new, automated system PodvodGazExpert has been developed for timely and qualitative determination of the physical conditions of underwater gas pipeline; The basis of the mathematical analysis of this new, automated system uses principal component analysis method; The process of determining the physical condition of an underwater gas pipeline with this new, automated system increases the MTBF by a factor of 8.18 above the existing system used today in the industry.

Leakage Detection And Localization Method Based On A Hybrid Inverse/Direct Modelling Approach Suitable For Handling Multiple-Leak Scenarios

When an accurate hydraulic network model is available, direct modeling techniques are very straightforward and reliable for on-line leakage detection and localization applied to large class of water distribution networks. In general, this type of techniques based on analytical models can be seen as an application of the well-known fault detection and isolation theory for complex industrial systems. Nonetheless, the assumption of single leak scenarios is usually made considering a certain leak size pattern which may not hold in real applications. Upgrading a leak detection and localization method based on a direct modeling approach to handle multiple-leak scenarios can be, on one hand, quite straightforward but, on the other hand, highly computational demanding for large class of water distribution networks given the huge number of potential water loss hotspots. This paper presents a leakage detection and localization method suitable for multiple-leak scenarios and large class of water distribution networks. This method can be seen as an upgrade of the above mentioned method based on a direct modeling approach in which a global search method based on genetic algorithms has been integrated in order to estimate those network water loss hotspots and the size of the leaks. This is an inverse / direct modeling method which tries to take benefit from both approaches: on one hand, the exploration capability of genetic algorithms to estimate network water loss hotspots and the size of the leaks and on the other hand, the straightforwardness and reliability offered by the availability of an accurate hydraulic model to assess those close network areas around the estimated hotspots. The application of the resulting method in a DMA of the Barcelona water distribution network is provided and discussed. The obtained results show that leakage detection and localization under multiple-leak scenarios may be performed efficiently following an easy procedure.

Validação da termografia no diagnóstico de lesões por esforços repetitivos/distúrbios osteomusculares relacionados ao trabalho

As Lesões por Esforços Repetitivos e Doenças Osteomusculares Relacionadas ao Trabalho estão caracterizadas por queixas de grande incapacidade funcional, causadas pelo uso dos membros superiores em tarefas que envolvam movimentos repetitivos. Esses distúrbios também podem ocorrer nas atividades de lazer ou no cotidiano das pessoas, especialmente quando realizadas por períodos longos, sem pausas adequadas para recuperação muscular, ou ainda, sem devido acompanhamento médico. A avaliação de doenças ocupacionais é eminentemente clínica. São raros os casos em que os exames complementares apóiam o diagnóstico médico. Diante disso, o objetivo desta pesquisa foi verificar a eficácia da técnica de Termografia no diagnóstico de LER/DORT. A amostra (n=51) foi dividida em dois grupos. Um grupo experimental (n=41) composto por 26 Taquigrafas da Assembléia Legislativa do Rio Grande do Sul e 15 digitadores da Companhia Estadual de Energia Elétrica do Rio Grande do Sul e um grupo controle (n=10) composto por participantes com outras profissões. Todos eles estavam de acordo com o que prescreve a resolução 196/96 do Conselho Nacional de Saúde. Os resultados do teste Q de Cochran mostraram diferenças estatisticamente significativas entre os 3 observadores da Termografia nas regiões dos punhos, cotovelos e ombros para o teste. Os coeficientes de concordância Kappa de cada observador no teste e reteste foram elevados. O coeficiente de concordância Kappa entre os observadores no teste mostraram que os 3 observadores estavam seguros para diagnosticar punho direito e cotovelos. Tais resultados mostram que a Termografia foi mais sensível e específica que a Ecografia e o Exame Clínico nos punhos direito e esquerdo. Assim, podemos inferir que os dados obtidos através das imagens termográficas permitiram uma melhor visualização das áreas traumatizadas nos componentes da amostra.

O impacto de reestruturação e privatização na gestão integrada do setor de energia elétrica: análise do setor a partir da abordagem de redes

The Brazilian energetic sector is passing through deep transformations. The restructure is mainly characterized by the passage from a vertical and centrally coordinated system, in hands of the State, to a more horizontal one, with characteristics of a network, in which organizations, such as the National Agency of Electric Energy (ANEEL), the new regulator entity, the Wholesaler Market of Electric Energy (MAE), the National Operator of Electric System (ONS), Eletrobrás and the National Bank of Economic and Social Development (BNDES) are designated as the principals integrators of the system. The objective of the present work was to analyze the influence of the privatization and restructuring processes in the integration of the Brazilian system of electric energy. The analysis was based on the instruments offered by the network approach. The results of the research show that the Brazilian sector of electric energy cannot be considered as a highly integrated network. In this new horizontal configuration, the social actors are affirming its roles, functions and objectives, while the key-organization like ANEEL, ONS, MAE, Eletrobrás, and BNDES are being structured to strengthen its integrative role.

Trajetória de desenvolvimento tecnológico na indústria de transmissão de energia elétrica: a experiência das Centrais Elétricas do Norte do Brasil S.A. - ELETRONORTE

Esta dissertação estuda as implicações dos processos de aprendizagem para acumulação de competências tecnológicas no nível de firmas. Este relacionamento foi examinado nas Centrais Elétricas do Norte do Brasil S.A. - Eletronorte, ao longo dos anos de 1990 a 2003. A empresa tem sua sede administrativa em Brasília e a sua área de atuação é caracterizada pela Amazônia Legal (Acre, Amapá, Amazonas, Maranhão, Mato Grosso, Pará, Rondônia, Roraima e Tocantins). A Eletronorte é uma empresa concessionária de geração e transmissão de energia elétrica, contudo, o presente trabalho enfocou apenas as atividades de transmissão, quer dizer, a geração está fora do escopo do estudo. A acumulação de competências tecnológicas para adaptar, modificar ou criar novas tecnologias é essencial para a sobrevivência e o desempenho competitivo das empresas. Para descrever o modo e a velocidade de acumulação de competências tecnológicas na Eletronorte, foram utilizadas estruturas analíticas existentes na literatura. Entretanto, tais estruturas foram adaptadas especificamente para a indústria de transmissão de energia elétrica. A acumulação de competências foi estudada para três funções tecnológicas: "engenharia, projetos e equipamento"; "operação e manutenção"; "processos operacionais". Os processos de aprendizagem foram examinados à luz de quatro características-chave: variedade, intensidade, funcionamento e interação. Durante o período de 1990 e 2003, a empresa construiu e acumulou diferentes níveis de competências tecnológicas nas funções estudadas. Com base nas evidências empíricas, verificou-se que a partir de 1995, quando a empresa passou a coordenar sistematicamente esforços para adquirir e converter conhecimentos do nível individual para o nível organizacional, a construção de capacitação tecnológica foi acelerada. Contudo, a partir do ano de 2000, em que foram diminuídos investimentos no setor elétrico brasileiro, o processo de capacitação tecnológica permaneceu estagnado. Assim, aliando-se a estudos anteriores realizados para outros tipos de indústria, a conclusão deste estudo sugere que o modo e a velocidade com que a firma acumulou capacitação tecnológica podem ser explicados pelos processos de aprendizagem (aquisição interna e externa, socialização e codificação do conhecimento) e pelas características-chave de como esses foram utilizados ao longo do tempo (variedade, intensidade, funcionamento e interação).

Manutenção produtiva total: o caso da Eletronorte

The continuous search of the increase of the productivity has been facilitating the growing diffusion of modern and advanced technologies, that open new ways for the renovation of the industrial productive process, as well as, to the appearance of modern administration systems that establish ways in direction to the democratization of the social relationships in the organizations. Accompanying that tendency and, motivated by the competitive characteristic of the market of electric energy, Eletronorte, adopted the Total Productive Maintenance - TPM, of japanese origin, as the system of administration of its productive process. This dissertation has as objective, to analyze the methodological content of the Total Productive Maintenance, showing its significance and its reach in the Regional of Transmission of Mato Grosso, adopting the post fordism, as comparison paradigm. The whole study and analysis had as focus the offices of the company and the Substation of Coxipó, placed in the city of Cuiabá, as well as the Substations of Rondonópolis and Sinop, placed in cities with the same name. The offices and the substations are geographically located in the state of Mato Grosso, and under the responsibility of the Regional of Transmission of Mato Grosso, of the Centrais Elétricas do Norte do Brasil SA - Eletronorte. The work method was of qualitative orientation and of case study, through a research of applied nature. The research was accomplished with explanatory and exploratory objectives. They were used as instruments of collection of data the analysis of documents, interviews, and application of questionnaires. The data collected through documents and of the application of questionnaires they were compiled and analyzed. The results of the interviews had for objective to confirm the consistency of the collected data. The obtained results demonstrate increases of productivity of the order of 40%, and reduction of the costs of up to 29%. The study still demonstrated, that TPM provoked significant impacts in the practices you work, denoting the presence of an action managerial dialógica. It was still characterized that the transference of TPM will depend in that context the administration system will be applied, because if this is here different from it studied, there won't be transference warranties.

Um estudo da inadimplência dos geradores no setor elétrico brasileiro à luz da teoria da regulação

Essa dissertação objetiva analisar, à luz da Teoria da Regulação, os principais problemas enfrentados pelo Setor Elétrico Brasileiro (SEB) quando ocorrem atrasos ou não entrega de novos empreendimentos de geração. Para tal estudo, serão apresentados os conceitos-chave do SEB, sua estrutura institucional e o funcionamento da Câmara de Comercialização de Energia Elétrica (CCEE), além de detalhadas as regras vigentes para lidar com a inadimplência de agentes. Em seguida, serão apresentados dois casos recentes e importantes do setor elétrico: Bertin e Santo Antônio. Finalmente, os casos apresentados e seus impactos no setor serão analisados a partir da literatura de regulação econômica.

O termo de ajustamento de conduta como instrumento de efetividade da regulação da Agência Nacional de Energia Elétrica (ANEEL)

A partir dos dados do Tribunal de Contas da União (TCU) que apontaram que, entre os anos de 2009 e 2013, a Agência Nacional de Energia Elétrica (ANEEL) arrecadou apenas 32,7% do total de multas administrativas aplicadas, passamos a questionar quais seriam as possíveis hipóteses que poderiam, de certa forma, ter influenciado nesse percentual. O próprio TCU chegou a apontar algumas hipóteses, entre elas, destacamos: recursos administrativos pendentes de julgamento, recursos pendentes no Poder Judiciário, falha no sistema de inscrição de inadimplentes no Cadastro Informativo de Créditos Não Quitados do Setor Público Federal (CADIN) e a celebração de Termos de Ajustamento de Conduta (TAC). O presente trabalho concentrou a análise apenas nessa última hipótese levantada, em razão da importância que esse instituto vem ganhando ao longo dos últimos anos. Visando testar a hipótese acima mencionada, realizamos uma pesquisa na Biblioteca Virtual da ANEEL e analisamos as decisões da diretoria da agência que julgaram os pedidos de celebração dos TACs entre os anos de 2011 e abril de 2015, tendo como objetivo identificar em que medida esses acordos celebrados com a agência impactaram na redução do valor das multas aplicadas.

Síntese e caracterização de ferrita ni-zn pelo método dos precursores poliméricos calcinada por energia de microondas

Magnetic ceramics have been widely investigated, especially with respect to intrinsic and extrinsic characteristics of these materials. Among the magnetic ceramic materials of technological interest, there are the ferrites. On the other hand, the thermal treatment of ceramic materials by microwave energy has offered various advantages such as: optimization of production processes, high heat control, low consumption of time and energy among others. In this work were synthesized powders of Ni-Zn ferrite with compositions Ni1- xZnxFe2O4 (0.25 ≤ x ≤ 0.75 mols) by the polymeric precursor route in two heat treatment conditions, conventional oven and microwave energy at 500, 650, 800 and 950°C and its structural, and morphological imaging. The materials were characterized by thermal analysis (TG/ DSC), X-ray diffraction (XRD), absorption spectroscopy in the infrared (FTIR), scanning electron microscopy (SEM), X-ray spectroscopy and energy dispersive (EDS) and vibrating sample magnetometry (VSM). The results of X-ray diffraction confirmed the formation of ferrite with spinel-type cubic structure. The extrinsic characteristics of the powders obtained by microwave calcination and influence significantly the magnetic behavior of ferrites, showing particles ferrimagnéticas characterized as soft magnetic materials (soft), is of great technological interest. The results obtained led the potential application of microwave energy for calcining powders of Ni-Zn ferrite

Análise do monitoramento de descargas atmosféricas na área de concessão da companhia força e luz do oeste em Guarapuava, Estado do Paraná

Aiming to analyze the monitoring of the atmospheric discharges incidence, the concession area of Companhia Forca e Luz do Oeste (CFLO) - Western Power and Light Company, located in the district of Guarapuava, state of Parana was chosen for a study developed in 2003, from January to December. After the air masses dynamics description, it was possible to identify the occurrence of atmospheric discharges and to compare them to the energy interruptions. To that end, atmospheric discharges density maps were created within the CFLO concession area for a later analysis of their influence in the electric energy supply. The monitoring of the atmospheric discharges and the comparison between this phenomenon and the occurrence of interruptions in the electric energy supply enabled this study. Results showed that such events are directly related, and that the rural area of the region under study underwent a major interference.