High electrical-to-green efficiency high stability intracavity-frequency-doubled Nd:YAG-LBO QCW 532 nm laser with a straight cavity

An electrical-to-green efficiency of more than 10% was demonstrated by intracavity-frequency-doubling a Q-switched diode-side-pumped Nd:YAG laser with a type II lithium triborate (LBO) crystal in a straight plano-concave cavity. An average power of 69.2 W at 532 nm was generated when electrical input power was 666 W. The corresponding electrical-to-green conversion efficiency is 10.4%. To the best of our knowledge, this is the highest electrical-to-green efficiency of second harmonic generation laser systems with side-pumped laser modules, ever reported. At about 66 W of green output power, the power fluctuation over 4 hours was better than +/-0.86%.

Gene transfection of hyperbranched PEI grafted by hydrophobic amino acid segment PBLG

The complex copolymer of hyperbranched polyethylenimine (PEI) with hydrophobic poly(gamma-benzyl L-glutamate) segment (PBLG) at their chain ends was synthesized. This water-soluble copolymer PEI-PBLG (PP) was characterized for DNA complexation (gel retardation assay, particle size, DNA release and DNase I protection), cell viability and in vitro transfection efficiency. The experiments showed that PP can effectively condense pDNA into particles. Size measurement of the complexes particles indicated that PP/DNA tended to form smaller nanoparticles than those of PEI/DNA, which was caused by the hydrophobic PBLG segments compressing the PP/DNA complex particles in aqueous solution. The representative average size of PP/DNA complex prepared using plasmid DNA (pEGFP-N1, pDNA) was about 96 nm. The condensed pDNA in the PP/pDNA complexes was significantly protected from enzymatic degradation by DNase1. Cytotoxicity studies by MTT colorimetric assays suggested that the PP had much lower toxicity than PEI. The in vitro transfection efficiency of PP/pDNA complexes improved a lot in HeLa cells, Vero cells and 293T cells as compared to that of PEI25K by the expression of Green Fluorescent Protein (GFP) as determined by flow cytometry. Thus, the water-soluble PP copolymer showed considerable potential as carriers for gene delivery.

Green light-emitting polyfluorenes with improved color purity incorporated with 4,7-diphenyl-2,1,3-benzothiadiazole moieties

By incorporating 4,7-diphenyl- 2,1,3 benzothiadiazole instead of 2,1,3-benzothiadiazole into the backbone of polyfluorene, we developed a novel series of green light- emitting polymers with much improved color purity. Compared with the state-of-the-art green light-emitting polymer, poly(fluorene-co-benzothiadiazole) (lambda max = 537 nm), the resulting polymers (lambda(max) = 521 nm) showed 10-20 nm blueshifted electroluminescence (EL) spectra and greatly improved color purity because the insertion of two phenylene units between the 2,1,3-benzothiadiazole unit and the fluorene unit reduced the effective conjugation length in the vicinity of the 2,1,3-benzothiadiazole unit. As a result, the resulting polymers emitted pure green light with CIE coordinates of (0.29, 0.63), which are very close to (0.26, 0.65) of standard green emission demanded by the National Television System Committee (NTSC). Moreover, the insertion of the phenylene unit did not affect the photoluminescence (PL) and EL efficiencies of the resulting polymers. PL quantum efficiency in solid films up to 0.82 was demonstrated. Single-layer devices (ITO/PEDOT/ polymer/Ca/Al) of these polymers exhibited a turn-on voltage of 4.2 V, luminous efficiency of 5.96 cd A(-1) and power efficiency of 2.21 lm W-1. High EL efficiencies and good color purities made these polymers very promising for display applications.

Ulva diversity in the Yellow Sea during the large-scale green algal blooms in 2008-2009

P>In the Yellow Sea of China, large-scale green tides have broken out for three consecutive years from 2007 to 2009. As part of the efforts to localize the algal source, two cruises were conducted in the early stage and the outbreak stage of the bloom in 2009. We analyzed the morphological and genetic diversity of drifting Ulva specimens and culture-derived isolates from seawater sampled in different localities. For phylogenetic analyses, the nuclear encoded ribosomal DNA internal transcribed spacer region (ITS nrDNA) and the plastid encoded large subunit of ribulose-1, 5-bisphosphate carboxylase/oxgenase gene (rbcL) were used. Our molecular and morphological data indicate that the dominant free-floating Ulva species in 2008 and 2009 possibly belonged to a single strain of the U. linza-procera-prolifera (LPP) clade. The ITS sequences from bloom-forming algal samples with dense branches were identical to those from U. linza-like specimens without branches derived from the Yellow Sea. Microscopic individuals of the dominant Ulva strain were detected in eight stations, revealing that spore dispersal in the water helped to enlarge biomass in the water during the outbreak stage of green tide in the Yellow Sea.

Steroids from green alga Chaetomorpha basiretorsa Setchell

Six steroids have been isolated from ethanolic extract of green alga Chaetomorpha basiretorsa Setchell by a combination of repeated normal phase silica gel and Sephadex LH-20 gel column chromatography as well as recrystallization. Using spectroscopic methods including MS and NMR, their structures were determined as beta-lawsaritol (1), saringosterol (2), 24-hydroperoxy-24-vinyl-cholesterol (3), beta-stigmasterol (4), stigmast-4-en-3 alpha, 6 beta-diol (5), 29-hydroxystigmasta-5, 24 (28)-dien-3 beta-ol (6). All these compounds were obtained from this genus for the first time and they were inactive (IC50 > 10 mu g /ml) against KB, Bel-7402, PC-3M, Ketr 3 and MCF-7 cell lines.

International transport costs and the margins of Intra-Latin American maritime trade.

This paper focuses on the analysis of the relationship between maritime trade and transport cost in Latin America. The analysis is based on disaggregated (SITC 5 digit level) trade data for intra Latin maritime trade routes over the period 1999-2004. The research contributes to the literature by disentangling the effects of transport costs on the range of traded goods (extensive margin) and the traded volumes of goods (intensive margin) of international trade in order to test some of the predictions of the trade theories that introduce firm heterogeneity in productivity, as well as fixed costs of exporting. Recent investigations show that spatial frictions (distance) reduce trade mainly by trimming the number of shipments and that most firms ship only to geographically proximate customers, instead of shipping to many destinations in quantities that decrease in distance. Our analyses confirm these findings and show that the opposite pattern is observed for ad-valorem freight rates that reduce aggregate trade values mainly by reducing the volume of imported goods (intensive margin).

A framework for the transformation of the creative industries in a digital age.

The creative industries sector faces a constantly changing context characterised by the speed of the development and deployment of digital information systems and Information Communications Technologies (ICT) on a global scale. This continuous digital disruption has had significant impact on the whole value chain of the sector: creation and production; discovery and distribution; and consumption of cultural goods and services. As a result, creative enterprises must evolve business and operational models and practices to be sustainable. Enterprises of all scales, type, and operational model are affected, and all sectors face ongoing digital disruption. Management consultancy practitioners and business strategy academics have called for new strategy development frameworks and toolkits, fit for a continuously changing world. This thesis investigates a novel approach to organisational change appropriate to the digital age, in the context of the creative sector in Scotland. A set of concepts, methods, tools, and processes to generate theoretical learning and practical knowing was created to support enterprises to digitally adapt through undertaking journeys of change and organisational development. The framework is called The AmbITion Approach. It was developed by blending participatory action research (PAR) methods and modern management consultancy, design, and creative practices. Empirical work also introduced to the framework Coghlan and Rashford’s change categories. These enabled the definition and description of the extent to which organisations developed: whether they experienced first order (change), second order (adaptation) or third order (transformation) change. Digital research tools for inquiry were tested by a pilot study, and then embedded in a longitudinal study over two years of twentyone participant organisations from Scotland’s creative sector. The author applied and investigated the novel approach in a national digital development programme for Scotland’s creative industries. The programme was designed and delivered by the author and ran nationally between 2012-14. Detailed grounded thematic analysis of the data corpus was undertaken, along with analysis of rich media case studies produced by the organisations about their change journeys. The results of studies on participants, and validation criteria applied to the results, demonstrated that the framework triggers second (adaptation) and third order change (transformation) in creative industry enterprises. The AmbITion Approach framework is suitable for the continuing landscape of digital disruption within the creative sector. The thesis contributes to practice the concepts, methods, tools, and processes of The AmbITion Approach, which have been empirically tested in the field, and validated as a new framework for business transformation in a digital age. The thesis contributes to knowledge a theoretical and conceptual framework with a specific set of constructs and criteria that define first, second, and third order change in creative enterprises, and a robust research and action framework for the analysis of the quality, validity and change achieved by action research based development programmes. The thesis additionally contributes to the practice of research, adding to our understanding of the value of PAR and design thinking approaches and creative practices as methods for change.

The Challenges of Pluralism: Locating Religion in a World of Diversity

This is a postprint (author's final draft) version of an article published in the journal Social Compass in 2010. The final version of this article may be found at http://dx.doi.org/10.1177/0037768610362406 (login may be required). The version made available in OpenBU was supplied by the author.

Bottom-up modelling of energy demand and technical energy savings potential in the Irish residential sector

The International Energy Agency has repeatedly identified increased end-use energy efficiency as the quickest, least costly method of green house gas mitigation, most recently in the 2012 World Energy Outlook, and urges all governing bodies to increase efforts to promote energy efficiency policies and technologies. The residential sector is recognised as a major potential source of cost effective energy efficiency gains. Within the EU this relative importance can be seen from a review of the National Energy Efficiency Action Plans (NEEAP) submitted by member states, which in all cases place a large emphasis on the residential sector. This is particularly true for Ireland whose residential sector has historically had higher energy consumption and CO2 emissions than the EU average and whose first NEEAP targeted 44% of the energy savings to be achieved in 2020 from this sector. This thesis develops a bottom-up engineering archetype modelling approach to analyse the Irish residential sector and to estimate the technical energy savings potential of a number of policy measures. First, a model of space and water heating energy demand for new dwellings is built and used to estimate the technical energy savings potential due to the introduction of the 2008 and 2010 changes to part L of the building regulations governing energy efficiency in new dwellings. Next, the author makes use of a valuable new dataset of Building Energy Rating (BER) survey results to first characterise the highly heterogeneous stock of existing dwellings, and then to estimate the technical energy savings potential of an ambitious national retrofit programme targeting up to 1 million residential dwellings. This thesis also presents work carried out by the author as part of a collaboration to produce a bottom-up, multi-sector LEAP model for Ireland. Overall this work highlights the challenges faced in successfully implementing both sets of policy measures. It points to the wide potential range of final savings possible from particular policy measures and the resulting high degree of uncertainty as to whether particular targets will be met and identifies the key factors on which the success of these policies will depend. It makes recommendations on further modelling work and on the improvements necessary in the data available to researchers and policy makers alike in order to develop increasingly sophisticated residential energy demand models and better inform policy.

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m3 and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.

Oceans and Human Health (OHH): a European Perspective from the Marine Board of the European Science Foundation (Marine Board-ESF)

The oceans and coastal seas provide mankind with many benefits including food for around a third of the global population, the air that we breathe and our climate system which enables habitation of much of the planet. However, the converse is that generation of natural events (such as hurricanes, severe storms and tsunamis) can have devastating impacts on coastal populations, while pollution of the seas by pathogens and toxic waste can cause illness and death in humans and animals. Harmful effects from biogenic toxins produced by algal blooms (HABs) and from the pathogens associated with microbial pollution are also a health hazard in seafood and from direct contact with water. The overall global burden of human disease caused by sewage pollution of coastal waters has been estimated at 4 million lost person-years annually. Finally, the impacts of all of these issues will be exacerbated by climate change. A holistic systems approach is needed. It must consider whole ecosystems, and their sustainability, such as integrated coastal zone management, is necessary to address the highly interconnected scientific challenges of increased human population pressure, pollution and over-exploitation of food (and other) resources as drivers of adverse ecological, social and economic impacts. There is also an urgent and critical requirement for effective and integrated public health solutions to be developed through the formulation of politically and environmentally meaningful policies. The research community required to address "Oceans & Human Health" in Europe is currently very fragmented, and recognition by policy makers of some of the problems, outlined in the list of challenges above, is limited. Nevertheless, relevant key policy issues for governments worldwide include the reduction of the burden of disease (including the early detection of emerging pathogens and other threats) and improving the quality of the global environment. Failure to effectively address these issues will impact adversely on efforts to alleviate poverty, sustain the availability of environmental goods and services and improve health and social and economic stability; and thus, will impinge on many policy decisions, both nationally and internationally. Knowledge exchange (KE) will be a key element of any ensuing research. KE will facilitate the integration of biological, medical, epidemiological, social and economic disciplines, as well as the emergence of synergies between seemingly unconnected areas of science and socio-economic issues, and will help to leverage knowledge transfer across the European Union (EU) and beyond. An integrated interdisciplinary systems approach is an effective way to bring together the appropriate groups of scientists, social scientists, economists, industry and other stakeholders with the policy formulators in order to address the complexities of interfacial problems in the area of environment and human health. The Marine Board of the European Science Foundation Working Group on "Oceans and Human Health" has been charged with developing a position paper on this topic with a view to identifying the scientific, social and economic challenges and making recommendations to the EU on policy-relevant research and development activities in this arena. This paper includes the background to health-related issues linked to the coastal environment and highlights the main arguments for an ecosystem-based whole systems approach.

Validations and descriptions of European syntaxa of vegetation dominated by lichens, bryophytes and algae

Fourty-two high-rank syntaxa and seven associations of the thallophyte system of syntaxa are either described as new or validated in this paper. Among those, there are the following nine classes: Aspicilietea candidae, Caulerpetea racemosae, Desmococcetea olivacei, Entophysalidetea deustae, Gloeocapsetea sanguineae, Mesotaenietea berggrenii, Naviculetea gregariae, Porpidietea zeoroidis, Roccelletea phycopsis. Eleven orders and ten alliances as well as three associations are described or validated: the Aspicilietalia verruculosae (incl. Aspicilion mashiginensis and Teloschistion contortuplicati), the Caulerpetalia racemosae (incl. Caulerpion racemosae), the Desmococcetalia olivacei (incl. Desmococcion olivacei), the Dirinetalia massiliensis, the Fucetalia vesiculosi (incl. Ascophyllion nodosi), the Gloeocapsetalia sanguineae, the Lecideetalia confluescentis (incl. Lecideion confluescentis), the Mesotaenietalia berggrenii (incl. Mesotaenion berggrenii, Mesotaenietum berggrenii and Chloromonadetum nivalis), the Naviculetalia gregariae (incl. Oscillatorion limosae and Oscillatorietum limosae), the Porpidietalia zeoroidis (incl. Porpidion zeoroidis), and the Roccelletalia fuciformis (incl. Paralecanographion grumulosae). Further, five orders, seven alliances and four associations, classified in known classes, were described as well. These include: the Bacidinetalia phacodis, the Agonimion octosporae and the Dendrographetalia decolorantis (all in the Arthonio radiatae-Lecidelletea elaeochromae), the Staurothelion solventis (in the Aspicilietea lacustris), the Pediastro duplicis-Scenedesmion quadricaudae and the Pediastro duplicis-Scenedesmetum quadricaudae (both in the Asterionelletea formosae), the Peccanion coralloidis and the Peltuletalia euplocae (both in the Collematetea cristati), the Laminarion hyperboreae, the Saccorhizo polyschidi-Laminarietum and the Alario esculenti-Himanthalietum elongatae (all in the Cystoseiretea crinitae), the Delesserietalia sanguinei, the Delesserion sanguinei and the Delesserietum sanguineae (all in the Lithophylletea soluti), as well as the the Rinodino confragosae-Rusavskietalia elegantis and the Rhizocarpo geographici-Rusavskion elegantis (both in the Rhizocarpetea geographici).

Impact of sample preparation on mineralogical analysis of iron reactive barrier materials

Permeable reactive barriers (PRBs) of zero-valent iron (Fe0) are increasingly being used to remediate contaminated ground water. Corrosion of Fe0 filings and the formation of precipitates can occur when the PRB material comes in contact with ground water and may reduce the lifespan and effectiveness of the barrier. At present, there are no routine procedures for preparing and analyzing the mineral precipitates from Fe0 PRB material. These procedures are needed because mineralogical composition of corrosion products used to interpret the barrier processes can change with iron oxidation and sample preparation. The objectives of this study were (i) to investigate a method of preparing Fe0 reactive barrier material for mineralogical analysis by X-ray diffraction (XRD), and (ii) to identify Fe mineral phases and rates of transformations induced by different mineralogical preparation techniques. Materials from an in situ Fe0 PRB were collected by undisturbed coring and processed for XRD analysis after different times since sampling for three size fractions and by various drying treatments. We found that whole-sample preparation for analysis was necessary because mineral precipitates occurred within the PRB material in different size fractions of the samples. Green rusts quickly disappeared from acetone-dried samples and were not present in air-dried and oven-dried samples. Maghemite/magnetite content increased over time and in oven-dried samples, especially after heating to 105°C. We conclude that care must be taken during sample preparation of Fe0 PRB material, especially for detection of green rusts, to ensure accurate identification of minerals present within the barrier system.

Is there a role for contemporary practices of askesis in supporting the transition to sustainable consumption?

An investigation of the potential role of contemporary practices of askesis (Foucault) in supporting the transition to sustainable consumption.

Where are they now? Tracking the longitudinal evolution of environmental businesses from the 1990s

In 1991 Bennett published one of the first major publications on the concept of ecopreneurship, business opportunities resulting from the emerging environmental agenda of the late 1980s and early 1990s. Since then a body of literature has developed that explores the idea of the intersection of entrepreneurship with environmentally and socially responsible behaviour. Many of the business cases presented by Bennett represent early adopters of green products, services and emerging eco-markets. Given the current emphasis on the transformation of business practices towards a more sustainable paradigm it is timely to review these 94 early ecopreneurial examples and consider their status two decades on from the original publication. This paper explores the definitions of environmental and social enterprise, and considers the longitudinal survival of these companies and the emerging trends in consolidation and failure of the sampled companies.