Groundwater from infiltration galleries used for small public water supply systems: contamination with pesticides and endocrine disruptors

Infiltration galleries are among the oldest known means used for small public water fountains. Owing to its ancestral origin they are usually associated with high quality water. Thirty-one compounds, including pesticides and estrogens from different chemical families, were analysed in waters from infiltration galleries collected in Alto Douro Demarcated Wine region (North of Portugal). A total of twelve compounds were detected in the water samples. Nine of these compounds are described as presenting evidence or potential evidence of interfering with the hormone system of humans and wildlife. Although concentrations of the target analytes were relatively low, many of them below their limit of quantification, four compounds were above quantification limit and two of them even above the legal limit of 0.1 lg/L: dimethoate (30.38 ng/L), folpet (64.35 ng/L), terbuthylazine-desethyl (22.28 to 292.36 ng/L) and terbuthylazine (22.49 to 369.33 ng/L).

Social contextual factors contributing to child and adolescent labor: an ecological analysis

OBJECTIVE: To examine the relationship between social contextual factors and child and adolescent labor. METHODS: Population-based cohort study carried out with 2,512 families living in 23 subareas of a large urban city in Brazil from 2000 to 2002. A random one-stage cluster sampling was used to select families. Data were obtained through individual household interviews using questionnaires. The annual cumulative incidence of child and adolescent labor was estimated for each district. New child and adolescent labor cases were those who had their first job over the two-year follow-up. The annual cumulative incidence of child and adolescent labor was the response variable and predictors were contextual factors such as lack of social support, social deprivation, unstructured family, perceived violence, poor school quality, poor environment conditions, and poor public services. Pearson's correlation and multiple linear regression were used to assess the associations. RESULTS: There were selected 943 families corresponding to 1,326 non-working children and adolescents aged 8 to 17 years. Lack of social support, social deprivation, perceived violence were all positively and individually associated with the annual cumulative incidence of child and adolescent labor. In the multiple linear regression model, however, only lack of social support and perceived violence in the neighborhood were positively associated to child and adolescent labor. No effect was found for poor school quality, poor environment conditions, poor public services or unstructured family. CONCLUSIONS: Poverty reduction programs can reduce the contextual factors associated with child and adolescent labor. Violence reduction programs and strengthening social support at the community level may contribute to reduce CAL.

Simulation model for driving dynamics, energy use and power supply

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Control of a power supply with cycling current using different controllers

Fast Field Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometers require controlled current sources in order to get accurate flux density with respect to its magnet. The main elements of the proposed solution are a power semiconductor, a DC voltage source and the magnet. The power semiconductor is commanded in order to get a linear control of the flux density. To implement the flux density control, a Hall Effect sensor is used. Furthermore, the dynamic behavior of the current source is analyzed and compared when using a PI controller and a PD2I controller.

Micro-generation Evaluation of the Zero Emissions Technologies in the Portuguese Market

Micro-generation is the small scale production of heat and/or electricity from a low carbon source and can be a powerful driver for carbon reduction, behavior change, security of supply and economic value. The energy conversion technologies can include photovoltaic panels, micro combined heat and power, micro wind, heat pumps, solar thermal systems, fuel cells and micro hydro schemes. In this paper, a small research of the availability of the conversion apparatus and the prices for the micro wind turbines and photovoltaic systems is made and a comparison between these two technologies is performed in terms of the availability of the resource and costs. An analysis of the new legal framework published in Portugal is done to realize if the incentives to individualspsila investment in sustainable and local energy production is worth for their point of view. An economic evaluation for these alternatives, accounting with the governmentpsilas incentives should lead, in most cases, into attractive return rates for the investment. Apart from the attractiveness of the investment there are though other aspects that should be taken into account and those are the benefits that these choices have to us all. The idea is that micro-generation will not only make a significant direct contribution to carbon reduction targets, it will also trigger a multiplier effect in behavior change by engaging hearts and minds, and providing more efficient use of energy by householders. The diversified profile of power generation by micro-generators, both in terms of location and timing, should reduce the impact of intermittency or plant failures with significant gains for security of supply.

Control of a power supply with cycling current using different controllers

Fast Field Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometers require controlled current sources in order to get accurate flux density with respect to its magnet. The main elements of the proposed solution are a power semiconductor, a DC voltage source and the magnet. The power semiconductor is commanded in order to get a linear control of the flux density. To implement the flux density control, a Hall Effect sensor is used. Furthermore, the dynamic behavior of the current source is analyzed and compared when using a PI controller and a PD2I controller.

Effects of acupressure on progress of labor and cesarean section rate: randomized clinical trial

OBJECTIVE To analyze the effects of acupressure at the SP6 point on labor duration and cesarean section rates in parturients served in a public maternity hospital.METHODS This controlled, randomized, double-blind, pragmatic clinical trial involved 156 participants with gestational age ≥ 37 weeks, cervical dilation ≥ 4 cm, and ≥ 2 contractions in 10 min. The women were randomly divided into an acupressure, placebo, or control group at a university hospital in an inland city in the state of Sao Paulo, Brazil, in 2013. Acupressure was applied to the SP6 point during contractions for 20 min.RESULTS The average labor duration was significantly different between the SP6 acupressure group [221.5 min (SD = 162.4)] versus placebo [397.9 min (SD = 265.6)] and versus control [381.9 min (SD = 358.3)] (p = 0.0047); however, the groups were similar regarding the cesarean section rates (p = 0.2526) and Apgar scores in the first minute (p = 0.9542) and the fifth minute (p = 0.7218) of life of the neonate.CONCLUSIONS The SP6 acupressure point proved to be a complementary measure to induce labor and may shorten the labor duration without causing adverse effects to the mother or the newborn. However, it did not affect the cesarean section rate.

Integração da análise energética na gestão Industrial de uma refinaria de açúcar

Mestrado em Engenharia Química - Optimização Energética na Industria Química

Logística e estão da cadeia de abastecimento

Relatório apresentado ao Instituto Superior De Contabilidade e Administração Do Porto para obtenção do grau de Mestre em Logística Orientado por António Jorge S. T. Duarte

Supply chain optimization of residual forestry biomass for bioenergy production: the case study of Portugal

Within a large set of renewable energies being explored to tackle energy sourcing problems, bioenergy can represent an attractive solution if effectively managed. The supply chain design supported by mathematical programming can be used as a decision support tool to the successful bioenergy production systems establishment. This strategic decision problem is addressed in this paper where we intent to study the design of the residual forestry biomass to bioelectricity production in the Portuguese context. In order to contribute to attain better solutions a mixed integer linear programming (MILP) model is developed and applied in order to optimize the design and planning of the bioenergy supply chain. While minimizing the total supply chain cost the production energy facilities capacity and location are defined. The model also includes the optimal selection of biomass amounts and sources, the transportation modes selection, and links that must be established for biomass transportation and products delivers to markets. Results illustrate the positive contribution of the mathematical programming approach to achieve viable economic solutions. Sensitivity analysis on the most uncertain parameters was performed: biomass availability, transportation costs, fixed operating costs and investment costs. (C) 2015 Elsevier Ltd. All rights reserved.

Reversible current power supply for fast-field cycling nuclear magnetic resonance equipment

The Fast Field-Cycling Nuclear Magnetic Resonance (FFC-NMR) is a technique used to study the molecular dynamics of different types of materials. The main elements of this equipment are a magnet and its power supply. The magnet used as reference in this work is basically a ferromagnetic core with two sets of coils and an air-gap where the materials' sample is placed. The power supply should supply the magnet being the magnet current controlled in order to perform cycles. One of the technical issues of this type of solution is the compensation of the non-linearities associated to the magnetic characteristic of the magnet and to parasitic magnetic fields. To overcome this problem, this paper describes and discusses a solution for the FFC-NMR power supply based on a four quadrant DC/DC converter.

Impacto da cogeração na minimização dos custos de energia elétrica

A promoção da cogeração foi um claro sinal de reconhecimento das vantagens deste sistema por parte da União Europeia. Face às preocupações de aprovisionamento energético e escassez de energia primária na Europa, foi promovida a cogeração, mediante a concessão de benefícios a nível do preço de venda da energia elétrica e de vários prémios. Contudo, estes incentivos não deixam de ter um impacto negativo no sistema, se se tiver em linha de conta que estes provocam um aumento do preço da energia elétrica para os clientes finais. Este foi o problema escolhido como objeto de estudo desta dissertação e que veio permitir concluir que, apesar de agora se pagar na fatura mensal (cliente em BTN) um valor adicional em cerca de 1€ devido à existência da cogeração, isto será benéfico futuramente, caso a política do estado Português mantenha estes apoios aos agentes da cogeração. No âmbito do regime remuneratório para a produção em cogeração, foi criada a ferramenta em Excel para simular o comportamento dos sistemas, tendo em conta as necessidades energéticas e muitas outras características. A principal função da ferramenta é a possibilidade de estimar a remuneração de uma unidade de cogeração em função da tecnologia utilizada e para diferentes condições de funcionamento.

Global restructuring and its effects on occupations: towards a new division of labor?

The following contribution considers whether global restructuring creates new forms of the division of labor. On the basis of empirical data from a comparative project in 14 European countries, the author supports the hypothesis that in addition to the ongoing process of the internationalization of work, there are ‘hidden’ effects at the local level. From the perspective of three occupational clusters, dynamics can be observed which have differing impacts on the occupational groups. Thus, there is a simultaneous process of restructuring and redefining skills, labor processes and the working organization which forms the daily reality of working men and women.

Optimização do processo de fabrico de componentes para a indústria automóvel

A qualidade é um factor-chave na indústria automóvel. Todos os fornecedores de componentes para a indústria automóvel estão sujeitos a qualificações e auditorias sistemáticas, com vista a melhorar os processos e verificar a sua rastreabilidade. Quando os processos assentam essencialmente em mão-de-obra intensiva, torna-se muito mais difícil atingir a ambicionada meta dos zero-defeitos, e a garantia da qualidade pode ficar comprometida, sendo necessário instalar procedimentos de controlo mais apurados. No entanto, se o processo ou processos forem convenientemente definidos, e se optar por capital intensivo em detrimento da mão-de-obra intensiva, a garantia da qualidade pode ser uma realidade, podendo ser fortemente minimizadas as operações de controlo da qualidade. Este trabalho teve por base a necessidade de reduzir fortemente, ou eliminar mesmo, o aparecimento de defeitos de montagem num sistema designado por remachado. Após cuidada análise do processo instalado, já parcialmente automatizado, mas ainda fortemente dependente de mão-de-obra, procedeu-se ao projecto de um equipamento capaz de reproduzir o mesmo efeito, mas que acomodasse alguns possíveis defeitos oriundos dos fornecedores dos componentes que são inseridos neste conjunto, colocados a montante na cadeia de fornecimento do produto. O equipamento resultante deste trabalho permitiu baixar o tempo de ciclo, acomodar a variabilidade dimensional detectada nos componentes que constituem o conjunto e reduzir drasticamente o número de não-conformidades.

Experiências supply-siders na UE15: a redução de impostos como política de melhoria da posição orçamental intertemporal

A Curva de Laffer postula que a partir de determinados níveis de taxas de impostos, uma redução destas pode aumentar as receitas fiscais. Tendo presentes os recentes desenvolvimentos da teoria do crescimento económico, que predizem que a política fiscal tem efeitos permanentes de longo prazo na taxa de crescimento económico, aquele argumento pode ser encarado num contexto dinâmico: a fiscalidade afecta permanentemente a taxa de crescimento económico de longo prazo, alterando as bases fiscais futuras, melhorando, em consequência, a posição orçamental de longo prazo. Neste artigo procura-se averiguar a validação de um efeito Laffer dinâmico para os Estados-Membros da União Europeia dos 15 e, em consequência, se a política fiscal pode ser gerida de forma a substituir o endividamento por reduções de impostos.