Development of Abutment Design Standards for Local Bridge Designs, Volume 2 of 3, Design Manual, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume (this volume) introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

LdShake: learning design solutions sharing and co-edition

Two important challenges that teachers are currently facing are the sharing and the collaborative authoring of their learning design solutions, such as didactical units and learning materials. On the one hand, there are tools that can be used for the creation of design solutions and only some of them facilitate the co-edition. However, they do not incorporate mechanisms that support the sharing of the designs between teachers. On the other hand, there are tools that serve as repositories of educational resources but they do not enable the authoring of the designs. In this paper we present LdShake, a web tool whose novelty is focused on the combined support for the social sharing and co-edition of learning design solutions within communities of teachers. Teachers can create and share learning designs with other teachers using different access rights so that they can read, comment or co-edit the designs. Therefore, each design solution is associated to a group of teachers able to work on its definition, and another group that can only see the design. The tool is generic in that it allows the creation of designs based on any pedagogical approach. However, it can be particularized in instances providing pre-formatted designs structured according to a specific didactic method (such as Problem-Based Learning, PBL). A particularized LdShake instance has been used in the context of Human Biology studies where teams of teachers are required to work together in the design of PBL solutions. A controlled user study, that compares the use of a generic LdShake and a Moodle system, configured to enable the creation and sharing of designs, has been also carried out. The combined results of the real and controlled studies show that the social structure, and the commenting, co-edition and publishing features of LdShake provide a useful, effective and usable approach for facilitating teachers' teamwork.

@neurIST infrastructure for advanced disease management through integration of heterogeneous data, computing, and complex processing services

The increasing volume of data describing humandisease processes and the growing complexity of understanding, managing, and sharing such data presents a huge challenge for clinicians and medical researchers. This paper presents the@neurIST system, which provides an infrastructure for biomedical research while aiding clinical care, by bringing together heterogeneous data and complex processing and computing services. Although @neurIST targets the investigation and treatment of cerebral aneurysms, the system’s architecture is generic enough that it could be adapted to the treatment of other diseases.Innovations in @neurIST include confining the patient data pertaining to aneurysms inside a single environment that offers cliniciansthe tools to analyze and interpret patient data and make use of knowledge-based guidance in planning their treatment. Medicalresearchers gain access to a critical mass of aneurysm related data due to the system’s ability to federate distributed informationsources. A semantically mediated grid infrastructure ensures that both clinicians and researchers are able to seamlessly access andwork on data that is distributed across multiple sites in a secure way in addition to providing computing resources on demand forperforming computationally intensive simulations for treatment planning and research.

Detection of four Plasmodium species in blood from humans by 18S rRNA gene subunit-based and specific real-time PCR assays

Résumé : Un nombre croissant de cas de malaria chez les voyageurs et migrants a été rapporté. Bien que l'analyse microscopique des frottis sanguins reste traditionnellement l'outil diagnostic de référence, sa fiabilité dépend considérablement de l'expertise de l'examinateur, pouvant elle-même faire défaut sous nos latitudes. Une PCR multiplex en temps réel a donc été développée en vue d'une standardisation du diagnostic. Un ensemble d'amorces génériques ciblant une région hautement conservée du gène d'ARN ribosomial 18S du genre Plasmodium a tout d'abord été conçu, dont le polymorphisme du produit d'amplification semblait suffisant pour créer quatre sondes spécifiques à l'espèce P. falciparum, P. malariae, P. vivax et P. ovale. Ces sondes utilisées en PCR en temps réel se sont révélées capables de détecter une seule copie de plasmide de P. falciparum, P. malariae, P. vivax et P. ovale spécifiquement. La même sensibilité a été obtenue avec une sonde de screening pouvant détecter les quatre espèces. Quatre-vingt-dix-sept échantillons de sang ont ensuite été testés, dont on a comparé la microscopie et la PCR en temps réel pour 66 (60 patients) d'entre eux. Ces deux méthodes ont montré une concordance globale de 86% pour la détection de plasmodia. Les résultats discordants ont été réévalués grâce à des données cliniques, une deuxième expertise microscopique et moléculaire (laboratoire de Genève et de l'Institut Suisse Tropical de Bâle), ainsi qu'à l'aide du séquençage. Cette nouvelle analyse s'est prononcé en faveur de la méthode moléculaire pour tous les neuf résultats discordants. Sur les 31 résultats positifs par les deux méthodes, la même réévaluation a pu donner raison 8 fois sur 9 à la PCR en temps réel sur le plan de l'identification de l'espèce plasmodiale. Les 31 autres échantillons ont été analysés pour le suivi de sept patients sous traitement antimalarique. Il a été observé une baisse rapide du nombre de parasites mesurée par la PCR en temps réel chez six des sept patients, baisse correspondant à la parasitémie déterminée microscopiquement. Ceci suggère ainsi le rôle potentiel de la PCR en temps réel dans le suivi thérapeutique des patients traités par antipaludéens. Abstract : There have been reports of increasing numbers of cases of malaria among migrants and travelers. Although microscopic examination of blood smears remains the "gold standard" in diagnosis, this method suffers from insufficient sensitivity and requires considerable expertise. To improve diagnosis, a multiplex real-time PCR was developed. One set of generic primers targeting a highly conserved region of the 18S rRNA gene of the genus Plasmodium was designed; the primer set was polymorphic enough internally to design four species-specific probes for P. falciparum, P. vivax, P. malarie, and P. ovale. Real-time PCR with species-specific probes detected one plasmid copy of P. falciparum, P. vivax, P. malariae, and P. ovale specifically. The same sensitivity was achieved for all species with real-time PCR with the 18S screening probe. Ninety-seven blood samples were investigated. For 66 of them (60 patients), microscopy and real-time PCR results were compared and had a crude agreement of 86% for the detection of plasmodia. Discordant results were reevaluated with clinical, molecular, and sequencing data to resolve them. All nine discordances between 18S screening PCR and microscopy were resolved in favor of the molecular method, as were eight of nine discordances at the species level for the species-specific PCR among the 31 samples positive by both methods. The other 31 blood samples were tested to monitor the antimalaria treatment in seven patients. The number of parasites measured by real-time PCR fell rapidly for six out of seven patients in parallel to parasitemia determined microscopically. This suggests a role of quantitative PCR for the monitoring of patients receiving antimalaria therapy.

An evaluation of new parsimony-based versus parametric inference methods in biogeography: a case study using the globally distributed plant family Sapindaceae

Aim  Recently developed parametric methods in historical biogeography allow researchers to integrate temporal and palaeogeographical information into the reconstruction of biogeographical scenarios, thus overcoming a known bias of parsimony-based approaches. Here, we compare a parametric method, dispersal-extinction-cladogenesis (DEC), against a parsimony-based method, dispersal-vicariance analysis (DIVA), which does not incorporate branch lengths but accounts for phylogenetic uncertainty through a Bayesian empirical approach (Bayes-DIVA). We analyse the benefits and limitations of each method using the cosmopolitan plant family Sapindaceae as a case study.Location  World-wide.Methods  Phylogenetic relationships were estimated by Bayesian inference on a large dataset representing generic diversity within Sapindaceae. Lineage divergence times were estimated by penalized likelihood over a sample of trees from the posterior distribution of the phylogeny to account for dating uncertainty in biogeographical reconstructions. We compared biogeographical scenarios between Bayes-DIVA and two different DEC models: one with no geological constraints and another that employed a stratified palaeogeographical model in which dispersal rates were scaled according to area connectivity across four time slices, reflecting the changing continental configuration over the last 110 million years.Results  Despite differences in the underlying biogeographical model, Bayes-DIVA and DEC inferred similar biogeographical scenarios. The main differences were: (1) in the timing of dispersal events - which in Bayes-DIVA sometimes conflicts with palaeogeographical information, and (2) in the lower frequency of terminal dispersal events inferred by DEC. Uncertainty in divergence time estimations influenced both the inference of ancestral ranges and the decisiveness with which an area can be assigned to a node.Main conclusions  By considering lineage divergence times, the DEC method gives more accurate reconstructions that are in agreement with palaeogeographical evidence. In contrast, Bayes-DIVA showed the highest decisiveness in unequivocally reconstructing ancestral ranges, probably reflecting its ability to integrate phylogenetic uncertainty. Care should be taken in defining the palaeogeographical model in DEC because of the possibility of overestimating the frequency of extinction events, or of inferring ancestral ranges that are outside the extant species ranges, owing to dispersal constraints enforced by the model. The wide-spanning spatial and temporal model proposed here could prove useful for testing large-scale biogeographical patterns in plants.

Pharmaceutical Generics, Vertical Product Differentiation, and Public Policy

This paper studies oligopolistic competition in off-patent pharmaceutical markets using a vertical product differentiation model. This model can explain the observation that countries with stronger regulations have smaller generic market shares. It can also explain the differences in observed regulatory regimes. Stronger regulation may be due to a higher proportion of production that is done by foreign firms. Finally, a closely related model can account for the observed increase in prices by patent owners after entry of generic producers.

Estudio comparativo de las estructuras genitales del macho en el género Pseudocentron (Hymenoptera, Megachilidae)

Comparative study of the structures of male genitalia in Pseudocentron species (Hymenoptera, Megachilidae). Male genitalia of twenty two species of Pseudocentron Mitchell, 1934 belonging to seven subgenera are analysed. The diagnostic characters are described and illustrated. The study shows that the male genitalia provides diagnostic characters at generic, subgeneric and specific levels.

Validation of the New Mix Design Process for Cold In-Place Rehabilitation Using Foamed Asphalt, 2007

Asphalt pavement recycling has grown dramatically over the last few years as a viable technology to rehabilitate existing asphalt pavements. Iowa's current Cold In-place Recycling (CIR) practice utilizes a generic recipe specification to define the characteristics of the CIR mixture. As CIR continues to evolve, the desire to place CIR mixture with specific engineering properties requires the use of a mix design process. A new mix design procedure was developed for Cold In-place Recycling using foamed asphalt (CIR-foam) in consideration of its predicted field performance. The new laboratory mix design process was validated against various Reclaimed Asphalt Pavement (RAP) materials to determine its consistency over a wide range of RAP materials available throughout Iowa. The performance tests, which include dynamic modulus test, dynamic creep test and raveling test, were conducted to evaluate the consistency of a new CIR-foam mix design process to ensure reliable mixture performance over a wide range of traffic and climatic conditions. The “lab designed” CIR will allow the pavement designer to take the properties of the CIR into account when determining the overlay thickness.

Current approaches and challenges for the metabolite profiling of complex natural extracts.

Metabolite profiling is critical in many aspects of the life sciences, particularly natural product research. Obtaining precise information on the chemical composition of complex natural extracts (metabolomes) that are primarily obtained from plants or microorganisms is a challenging task that requires sophisticated, advanced analytical methods. In this respect, significant advances in hyphenated chromatographic techniques (LC-MS, GC-MS and LC-NMR in particular), as well as data mining and processing methods, have occurred over the last decade. Together, these tools, in combination with bioassay profiling methods, serve an important role in metabolomics for the purposes of both peak annotation and dereplication in natural product research. In this review, a survey of the techniques that are used for generic and comprehensive profiling of secondary metabolites in natural extracts is provided. The various approaches (chromatographic methods: LC-MS, GC-MS, and LC-NMR and direct spectroscopic methods: NMR and DIMS) are discussed with respect to their resolution and sensitivity for extract profiling. In addition the structural information that can be generated through these techniques or in combination, is compared in relation to the identification of metabolites in complex mixtures. Analytical strategies with applications to natural extracts and novel methods that have strong potential, regardless of how often they are used, are discussed with respect to their potential applications and future trends.

Revision of Loboederus Guérin-Méneville (Coleoptera, Elateridae, Elaterinae, Ampedini)

The genus Loboederus Guérin-Méneville, 1831 formerly included three species: L. appendiculatus (Perty, 1830), L. fleutiauxi Lesne, 1940 and L. luederwaldti Costa-Andrade, 1935. L. fleutiauxi is considered as a junior synonym of L. luederwaldti. The generic characterization and the morphological analysis and redescriptions of both species are presented. The lectotype and paralectotypes of L. luederwaldti are designated and the geographical distribution of both species is widened.

Regulatory ambivalence and the limitations of pharmaceutical policy in Spain

Broadly speaking, pharmaceutical policy in Spain has been unable to control either the price or thevolume of drugs prescribed. Limited attempts have been made to bring together the regulation of thepharmaceutical market and policies, in pursuit of the desired goals of efficiency and quality. Thispaper assesses the regulation of the Spanish pharmaceutical market over the last two decades byexamining regulation and policy and the available empirical evidence on their appreciable effects,and presents recommendations for policy design. Our findings suggest that policies aiming to improveefficiency and quality have not managed to contain costs, while cost-effectiveness is still overlooked.We argue that future policies should encourage broader participation in the decision-making processesand promote a higher degree of competition, especially from generic drugs.

Revision of the genus Blauta LeConte (Coleoptera, Elateridae, Elaterinae, Ampedini, Dicrepidiina)

The genus Blauta Leconte, 1853 is formed by two species, B. cribraria (Germar, 1844) and B. falli Brown, 1936, recorded from Southeast of United States. The generic characterization and the redescriptions and morphological illustrations, including mouthparts and genitalia, of both species are presented. A comparison of both species is also included.

The impact of the reference price system on the pharmaceutical market: A theoretical approach

This article analyses the impact of the reference pricesystem on the price-setting strategies of thepharmaceutical firms and on the level of generic usage.This model is the first to take explicitly into accountthe impact of the reference price mechanism on the levelof competition between brand-name and generic drugs andnational pharmaceutical spending. We consider aduopolistic model with one firm producing the brand-namedrug, whose patent has already expired, and the otherproducing the corresponding generic version. We work ina partial equilibrium framework where firms set pricessequentially and consumers face heterogeneous switchingcosts.We show that brand producers compensate thedecline of profits by selling greater quantities insteadof charging higher prices, thus fostering pricecompetition in the pharmaceutical market. This result isa consequence of both the assumption of a verticallydifferentiated model and the introduction of thereference price system.

Fées et weise Frauen: les faiseuses de dons chez Perrault et les Grimm, du merveilleux rationalisé au merveilleux naturalisé

Dans «La Belle au bois dormant» et «Dornröschen», des personnages aux pouvoirs magiques déterminent l'avenir des héroïnes en leur accordant des dons positifs ou négatifs. La comparaison des textes montre toutefois que les fées et les weise Frauen (femmes sages), issues de traditions différentes, ne jouent pas les mêmes rôles dans les intrigues et que leurs actions ne sont pas présentées de la même manière. Si le conte de Perrault explique les motivations des fées et en fait des êtres réfléchis, le Märchen des Grimm représente les weise Frauen comme des figures énigmatiques appartenant à un univers où se déroulent des événements inexpliqués. Ainsi, le traitement de ces personnages féminins emblématiques reflète une volonté de rationaliser le merveilleux chez Perrault, contrairement aux Grimm, et témoigne ainsi de différences génériques, mais aussi historiques et culturelles plus larges. / Both in «La Belle au bois dormant» and in «Dornröschen», characters with magical powers determine the future of the heroines by endowing them with positive or negative gifts. The comparison of the two texts nonetheless shows that the fées (fairies) and the weise Frauen (wise women) -coming as they do from different cultural traditions- do not play the same role in the plot, nor are their actions presented in the same way. Whereas Perrault's conte explains the fairies' motivations and portrays them as rational beings, Grimm's Märchen depicts weise Frauen as mysterious women who belong to a universe of unexplained events. The treatment of these wondrous feminine figures thus testifies to a willingness to rationalise the marvellous in Perrault, and to present it as self-evident in Grimm, thereby reflecting generic as well as broader historical and cultural differences.

Description of Photuris fulvipes (Blanchard) immatures (Coleoptera, Lampyridae, Photurinae) and bionomic aspects under laboratory conditions

Larvae and pupae of the cryptic firefly Photuris fulvipes (Blanchard,1837) are described. They were reared to adult stage from eggs laid by a female collected in São Luiz do Paraitinga, São Paulo, Brazil. Additionally, adult diagnosis and some bionomic data observed in the laboratory are presented. The bionomical and morphological characteristics of P. fulvipes were compared to other unidentified species of the genus and to Bycellonycha sp. from literature. At moment, the data are insufficient to propose a diagnosis for the species, but some characteristics appear to define species group or, at least, they may have generic value.