948 resultados para energy and resources
Resumo:
In recent years, growing attention has been devoted to the use of lignocellulosic biomass as a feedstock to produce renewable carbohydrates as a source of energy products, including liquid alternatives to fossil fuels. The benefits of developing woody biomass to ethanol technology are to increase the long-term national energy security, reduce fossil energy consumption, lower greenhouse gas emissions, use renewable rather than depletable resources, and create local jobs. Currently, research is driven by the need to reduce the cost of biomass-ethanol production. One of the preferred methods is to thermochemically pretreat the biomass material and subsequently, enzymatically hydrolyze the pretreated material to fermentable sugars that can then be converted to ethanol using specialized microorganisms. The goals of pretreatment are to remove the hemicellulose fraction from other biomass components, reduce bioconversion time, enhance enzymatic conversion of the cellulose fraction, and, hopefully, obtain a higher ethanol yield. The primary goal of this research is to obtain kinetic detailed data for dilute acid hydrolysis for several timber species from the Upper Peninsula of Michigan and switchgrass. These results will be used to identify optimum reaction conditions to maximize production of fermentable sugars and minimize production of non-fermentable byproducts. The structural carbohydrate analysis of the biomass species used in this project was performed using the procedure proposed by National Renewable Energy Laboratory (NREL). Subsequently, dilute acid-catalyzed hydrolysis of biomass, including aspen, basswood, balsam, red maple, and switchgrass, was studied at various temperatures, acid concentrations, and particle sizes in a 1-L well-mixed batch reactor (Parr Instruments, ii Model 4571). 25 g of biomass and 500 mL of diluted acid solution were added into a 1-L glass liner, and then put into the reactor. During the experiment, 5 mL samples were taken starting at 100°C at 3 min intervals until reaching the targeted temperature (160, 175, or 190°C), followed by 4 samples after achieving the desired temperature. The collected samples were then cooled in an ice bath immediately to stop the reaction. The cooled samples were filtered using 0.2 μm MILLIPORE membrane filter to remove suspended solids. The filtered samples were then analyzed using High Performance Liquid Chromatography (HPLC) with a Bio-Rad Aminex HPX-87P column, and refractive index detection to measure monomeric and polymeric sugars plus degradation byproducts. A first order reaction model was assumed and the kinetic parameters such as activation energy and pre-exponential factor from Arrhenius equation were obtained from a match between the model and experimental data. The reaction temperature increases linearly after 40 minutes during experiments. Xylose and other sugars were formed from hemicellulose hydrolysis over this heat up period until a maximum concentration was reached at the time near when the targeted temperature was reached. However, negligible amount of xylose byproducts and small concentrations of other soluble sugars, such as mannose, arabinose, and galactose were detected during this initial heat up period. Very little cellulose hydrolysis yielding glucose was observed during the initial heat up period. On the other hand, later in the reaction during the constant temperature period xylose was degraded to furfural. Glucose production from cellulose was increased during this constant temperature period at later time points in the reaction. The kinetic coefficient governing the generation of xylose from hemicellulose and the generation of furfural from xylose presented a coherent dependence on both temperature and acid concentration. However, no effect was observed in the particle size. There were three types of biomass used in this project; hardwood (aspen, basswood, and red maple), softwood (balsam), and a herbaceous crop (switchgrass). The activation energies and the pre-exponential factors of the timber species and switchgrass were in a range of 49 - 180 kJ/mol and from 7.5x104 - 2.6x1020 min-1, respectively, for the xylose formation model. In addition, for xylose degradation, the activation energies and the preexponential factors ranged from 130 - 170 kJ/mol and from 6.8x1013 - 3.7x1017 min-1, respectively. The results compare favorably with the literature values given by Ranganathan et al, 1985. Overall, up to 92 % of the xylose was able to generate from the dilute acid hydrolysis in this project.
Resumo:
Fatal falls from great height are a frequently encountered setting in forensic pathology. They present--by virtue of a calculable energy transmission to the body--an ideal model for the assessment of the effects of blunt trauma to a human body. As multislice computed tomography (MSCT) has proven not only to be invaluable in clinical examinations, but also to be a viable tool in post-mortem imaging, especially in the field of osseous injuries, we performed a MSCT scan on 20 victims of falls from great height. We hereby detected fractures and their distributions were compared with the impact energy. Our study suggests a marked increase of extensive damage to different body regions at about 20 kJ and more. The thorax was most often affected, regardless of the amount of impacting energy and the primary impact site. Cranial fracture frequency displayed a biphasic distribution with regard to the impacting energy; they were more frequent in energies of less than 10, and more than 20 kJ, but rarer in the intermediate energy group, namely that of 10-20 kJ.
Resumo:
Endogenous development is defined as development that values primarily locally available resources and the way people organized themselves for that purpose. It is a dynamic and evolving concept that also embraces innovations and complementation from other than endogenous sources of knowledge; however, only as far as they are based on mutual respect and the recognition of cultural and socioeconomic self-determination of each of the parties involved. Experiences that have been systematized in the context of the BioAndes Program are demonstrating that enhancing food security and food sovereignty on the basis of endogenous development can be best achieved by applying a ‘biocultural’ perspective: This means to promote and support actions that are simultaneously valuing biological (fauna, flora, soils, or agrobiodiversity) and sociocultural resources (forms of social organization, local knowledge and skills, norms, and the related worldviews). In Bolivia, that is one of the Latin-American countries with the highest levels of poverty (79% of the rural population) and undernourishment (22% of the total population), the Program BioAndes promotes food sovereignty and food security by revitalizing the knowledge of Andean indigenous people and strengthening their livelihood strategies. This starts by recognizing that Andean people have developed complex strategies to constantly adapt to highly diverse and changing socioenvironmental conditions. These strategies are characterized by organizing the communities, land use and livelihoods along a vertical gradient of the available eco-climatic zones; the resulting agricultural systems are evolving around the own sociocultural values of reciprocity and mutual cooperation, giving thus access to an extensive variety of food, fiber and energy sources. As the influences of markets, competition or individualization are increasingly affecting the life in the communities, people became aware of the need to find a new balance between endogenous and exogenous forms of knowledge. In this context, BioAndes starts by recognizing the wealth and potentials of local practices and aims to integrate its actions into the ongoing endogenous processes of innovation and adaptation. In order to avoid external impositions and biases, the program intervenes on the basis of a dialogue between exogenous, mainly scientific, and indigenous forms of knowledge. The paper presents an analysis of the strengths and weaknesses of enhancing endogenous development through a dialogue between scientific and indigenous knowledge by specifically focusing on its effects on food sovereignty and food security in three ‘biocultural’ rural areas of the Bolivian highlands. The paper shows how the dialogue between different forms of knowledge evolved alongside the following project activities: 1) recuperation and renovation of local seeds and crop varieties (potato – Solanum spp., quinoa – Chenopodium quinoa, cañahua – Chenopodium pallidicaule); 2) support for the elaboration of community-based norms and regulations for governing access and distribution of non-timber forest products, such as medicinal, fodder, and construction plants; 3) revitalization of ethnoveterinary knowledge for sheep and llama breeding; 4) improvement of local knowledge about the transformation of food products (sheep-cheese, lacayote – Cucurbita sp. - jam, dried llama meat, fours of cañahua and other Andean crops). The implementation of these activities fostered the community-based livelihoods of indigenous people by complementing them with carefully and jointly designed innovations based on internal and external sources of knowledge and resources. Through this process, the epistemological and ontological basis that underlies local practices was made visible. On this basis, local and external actors started to jointly define a renewed concept of food security and food sovereignty that, while oriented in the notions of well being according to a collectively re-crafted world view, was incorporating external contributions as well. Enabling and hindering factors, actors and conditions of these processes are discussed in the paper.
Resumo:
Current teen pregnancy and repeat pregnancy rates reveal that there is a pressing need for comprehensive care for pregnant and parenting teens to address their unique needs. The Internet has become a source of various types of information and as a result, several efforts have begun to assess the quality of health information provided on websites. The objective of this study was to assess the functionality and quality of websites containing health information and resources for pregnant and parenting teens. The three most widely used search engines currently: Google, MSN, and Yahoo were searched using three general search terms “teen pregnancy”, “pregnant teen”, and “teen parent”. The first 5 pages of each search were reviewed and categorized to yield 12 websites which met inclusion criteria for content evaluation. The 12 websites were rated using a pre-existing instrument encompassing two domains: functionality and content analysis. Within the functionality domain, this sample highlighted the need to improve accessibility and credibility for the target population. The content analysis revealed that among the topics which are recommended for pregnant and parenting teens, the topics most commonly covered were mental health and primary and preventive health care. The majority of websites neglected sexual health topics including STI’s and family planning. This study provides the first glimpse into health information and resources for pregnant and parenting teens on the Internet. Researchers, health care providers, social workers, health educators, and website sponsors can use these results to maintain and recommend websites which offer easily accessible, accurate, and practical information for pregnant and parenting teens.^
Resumo:
The Tara Oceans Expedition (2009-2013) sampled the world oceans on board a 36 m long schooner, collecting environmental data and organisms from viruses to planktonic metazoans for later analyses using modern sequencing and state-of-the-art imaging technologies. Tara Oceans Data are particularly suited to study the genetic, morphological and functional diversity of plankton. The present data set provides continuous measurements made with a FRRF instrument, operating in a flow-through mode during the 2009-2012 part of the expedition. It operates by exciting chlorophyll fluorescence using a series of short flashes of controlled energy and time intervals (Kolber et al, 1998). The fluorescence transients produced by this excitation signal were analysed in real-time to provide estimates of abundance of photosynthetic pigments, the photosynthetic yields (Fv/Fm), the functional absorption cross section (a proxy for efficiency of photosynthetic energy acquisition), the kinetics of photosynthetic electron transport between Photosystem II and Photosystem I, and the size of the PQ pool. These parameters were measured at excitation wavelength of 445 nm, 470nm, 505 nm, and 535 nm, allowing to assess the presence and the photosynthetic performance of different phytoplankton taxa based on the spectral composition of their light harvesting pigments. The FRRF-derived photosynthetic characteristics were used to calculate the initial slope, the half saturation, and the maximum level of Photosynthesis vs Irradiance relationship. FRRF data were acquired continuously, at 1-minute time intervals.
Resumo:
A short paper for dissemination based on a research piece published by the E15Initiative: Subsidies, Clean Energy, and Climate Change, February 2015. Implemented jointly by ICTSD and the World Economic Forum, the E15Initiative convenes world-class experts and institutions to generate strategic analysis and recommendations for government, business, and civil society geared towards strengthening the global trade and investment system. The paper is also published in Spanish and Portuguese.
Resumo:
In the early stages of the development of Japan’s environmental policy, sulfur oxide (SOx) emissions, which seriously damage health, was the most important air pollution problem. In the second half of the 1960s and the first half of the 1970s, the measures against SOx emissions progressed quickly, and these emissions were reduced drastically. The most important factor of the reduction was the conversion to a low-sulfur fuel for large-scale fuel users, such as the electric power industry. However, industries started conversion to low-sulfur fuel not due to environmental concerns, but simply to reduce costs. Furthermore, the interaction among the various interests of the electric power industry, oil refineries, the central government, local governments, and citizens over the energy and environmental policies led to the measures against SOx emissions by fuel conversion.
Resumo:
A sustainable manufacturing process must rely on an also sustainable raw materials and energy supply. This paper is intended to show the results of the studies developed on sustainable business models for the minerals industry as a fundamental previous part of a sustainable manufacturing process. As it has happened in other economic activities, the mining and minerals industry has come under tremendous pressure to improve its social, developmental, and environmental performance. Mining, refining, and the use and disposal of minerals have in some instances led to significant local environmental and social damage. Nowadays, like in other parts of the corporate world, companies are more routinely expected to perform to ever higher standards of behavior, going well beyond achieving the best rate of return for shareholders. They are also increasingly being asked to be more transparent and subject to third-party audit or review, especially in environmental aspects. In terms of environment, there are three inter-related areas where innovation and new business models can make the biggest difference: carbon, water and biodiversity. The focus in these three areas is for two reasons. First, the industrial and energetic minerals industry has significant footprints in each of these areas. Second, these three areas are where the potential environmental impacts go beyond local stakeholders and communities, and can even have global impacts, like in the case of carbon. So prioritizing efforts in these areas will ultimately be a strategic differentiator as the industry businesses continues to grow. Over the next forty years, world?s population is predicted to rise from 6.300 million to 9.500 million people. This will mean a huge demand of natural resources. Indeed, consumption rates are such that current demand for raw materials will probably soon exceed the planet?s capacity. As awareness of the actual situation grows, the public is demanding goods and services that are even more environmentally sustainable. This means that massive efforts are required to reduce the amount of materials we use, including freshwater, minerals and oil, biodiversity, and marine resources. It?s clear that business as usual is no longer possible. Today, companies face not only the economic fallout of the financial crisis; they face the substantial challenge of transitioning to a low-carbon economy that is constrained by dwindling natural resources easily accessible. Innovative business models offer pioneering companies an early start toward the future. They can signal to consumers how to make sustainable choices and provide reward for both the consumer and the shareholder. Climate change and carbon remain major risk discontinuities that we need to better understand and deal with. In the absence of a global carbon solution, the principal objective of any individual country should be to reduce its global carbon emissions by encouraging conservation. The mineral industry internal response is to continue to focus on reducing the energy intensity of our existing operations through energy efficiency and the progressive introduction of new technology. Planning of the new projects must ensure that their energy footprint is minimal from the start. These actions will increase the long term resilience of the business to uncertain energy and carbon markets. This focus, combined with a strong demand for skills in this strategic area for the future requires an appropriate change in initial and continuing training of engineers and technicians and their awareness of the issue of eco-design. It will also need the development of measurement tools for consistent comparisons between companies and the assessments integration of the carbon footprint of mining equipments and services in a comprehensive impact study on the sustainable development of the Economy.