A flexible optimisation model for the railway crew scheduling problem

Addressing the Crew Scheduling Problem (CSP) in transportation systems can be too complex to capture all details. The designed models usually ignore or simplify features which are difficult to formulate. This paper proposes an alternative formulation using a Mixed Integer Programming (MIP) approach to the problem. The optimisation model integrates the two phases of pairing generation and pairing optimisation by simultaneously sequencing trips into feasible duties and minimising total elapsed time of any duty. Crew scheduling constraints in which the crew have to return to their home depot at the end of the shift are included in the model. The flexibility of this model comes in the inclusion of the time interval of relief opportunities, allowing the crew to be relieved during a finite time interval. This will enhance the robustness of the schedule and provide a better representation of real-world conditions.

Design of a traumatic injury simulator for assessing lower limb response to high loading rates

Current military conflicts are characterized by the use of the improvised explosive device. Improvements in personal protection, medical care, and evacuation logistics have resulted in increasing numbers of casualties surviving with complex musculoskeletal injuries, often leading to lifelong disability. Thus, there exists an urgent requirement to investigate the mechanism of extremity injury caused by these devices in order to develop mitigation strategies. In addition, the wounds of war are no longer restricted to the battlefield; similar injuries can be witnessed in civilian centers following a terrorist attack. Key to understanding such mechanisms of injury is the ability to deconstruct the complexities of an explosive event into a controlled, laboratory-based environment. In this article, a traumatic injury simulator, designed to recreate in the laboratory the impulse that is transferred to the lower extremity from an anti-vehicle explosion, is presented and characterized experimentally and numerically. Tests with instrumented cadaveric limbs were then conducted to assess the simulator’s ability to interact with the human in two mounting conditions, simulating typical seated and standing vehicle passengers. This experimental device will now allow us to (a) gain comprehensive understanding of the load-transfer mechanisms through the lower limb, (b) characterize the dissipating capacity of mitigation technologies, and (c) assess the bio-fidelity of surrogates.

Inclusion of tapered tubes in enhancing the crash performance of automotive frontal structures

This paper treats the design and analysis of an energy absorbing system. Experimental tests were conducted on a prototype, and these tests were used to validate a finite element model of the system. The model was then used to analyze the response of the system under dynamic impact loading. The response was compared with that of a similar system consisting of straight circular tubes, empty and foam-filled conical tubes. Three types of such supplementary devices were included in the energy absorbing system to examine the crush behavior and energy absorption capacity when subjected to axial and oblique impact loadings. The findings were used to develop design guidelines and recommendations for the implementation of tapered tubes in energy absorbing systems. To this end, the system was conceptual in form such that it could be adopted for a variety of applications. Nevertheless, for convenience, the approach in this study is to treat the system as a demonstrator car bumper system used to absorb impact energy during minor frontal collisions.

Ability of recombinant human bone morphogenetic protein 2 to enhance bone healing in the presence of tobramycin : evaluation in a rat segmental defect model

Objective To determine whether locally applied tobramycin influences the ability of recombinant human bone morphogenetic protein 2 (rhBMP-2) to heal a segmental defect in the rat femur. Methods The influence of tobramycin on the osteogenic differentiation of mesenchymal stem cells was first evaluated in vitro. For the subsequent, in vivo experiments, a 5-mm segmental defect was created in the right femur of each of 25 Sprague-Dawley rats and stabilized with an external fixator and four Kirschner wires. Rats were divided in four groups: empty control, tobramycin (11 mg)/absorbable collagen sponge, rhBMP-2 (11 μg)/absorbable collagen sponge, and rhBMP-2/absorbable collagen sponge with tobramycin. Bone healing was monitored by radiography at 3 and 8 weeks. Animals were euthanized at 8 weeks and the properties of the defect were compared with the intact contralateral femur. Bone formation in the defect region was assessed by dual-energy x-ray absorptiometry, microcomputed tomography, histology, and mechanical testing. Results Tobramycin exerted a dose-dependent inhibition of alkaline phosphatase induction and calcium deposition by mesenchymal stem cells cultured under osteogenic conditions. The inhibition was reversed in the presence of 500 ng/mL of rhBMP-2. Segmental defects in the rat femora failed to heal in the absence of rhBMP-2. Tobramycin exerted no inhibitory effects on the ability of rhBMP-2 to heal these defects and increased the bone area of the defects treated with rhBMP-2. Data obtained from all other parameters of healing, including dual-energy x-ray absorptiometry, microcomputed tomography, histology, and mechanical testing, were unaffected by tobramycin. Conclusions Although our in vitro results suggested that tobramycin inhibits the osteogenic differentiation of mesenchymal stem cells, this could be overcome by rhBMP-2. Tobramycin did not impair the ability of rhBMP-2 to heal critical-sized femoral defects in rats. Indeed, bone area was increased by nearly 20% in the rhBMP-2 group treated with tobramycin. This study shows that locally applied tobramycin can be used in conjunction with rhBMP-2 to enhance bone formation at fracture sites.

ICANN and the concept of democratic deficit

The Internet Corporation for Assigned Names and Numbers (ICANN) is an institution besieged. It has endeavored to be democratic but its attempts to do so have been disastrous. The typical explanation for this is that the problem is with ICANN: it fails to meet its democratic obligations. My view is that the problem is with our understanding of "democracy." Democracy is an empty concept that fails to describe few, if any, of our genuine political commitments. In the real world, the failings inherent in "democracy" have been papered over by some unusual characteristics of the physical political process. However, in online trans-national institutions like ICANN, democracy is exposed as a poor substitute for a number of other conceptions of our political commitments. This Article seeks to articulate these political commitments and to explain why democracy and ICANN are such a poor mix. It begins by charting the rise of ICANN and its attempts to be democratic. It then explains why democracy is an empty shell of a concept. It then explores some features of democracy and ICANN, explaining why the online world exposes limitations in implications of democracy such as the nature of the demos, the idea of constituencies, direct democracy, voting, and the like. It concludes that ICANN's example demonstrates that democracy is in fact anything but a coherent general theory of political action. We need to consider, then, whether we should continue to berate ICANN for its undemocratic actions.

Art of sleeping - "Like a Thief"

Research background Art of Sleeping’s “Like a Thief” is an EP of popular music produced at Airlock studios and released in 2012 by the record label Dew Process. “Like a Thief” contributes to studies in the field of music production, as well as furthering research into the role of of national radio play in the development of emerging musicians and artists. Using Australian bands such as Boy and Bear as a reference point, the EP showcases the vocal range of Caleb Hodges and investigates possibilities in extending the modes of musicality possible within the recording studio through use of multiple layering of processed keyboards and electric guitar. Scholars such as Ben Eltham and journalists such as Everett True have written about the importance of the support of Australia’s national youth broadcaster Triple J in the early stages of a band’s development. The approach of the production of the EP was conceived with this agenda in mind, and asked, what can we learn about the relationships between popular music production, distribution and consumption, and the role that national public radio has come to play in the Australian context? Research contribution This project has identified that certain avenues of the music industry continue to aligned with Triple J airplay, that these avenues play an important role in the level of success that artists are likely to achieve, and that targeted understanding of music production techniques and aesthetics may contribute to success in this regard. Research significance The EP’s two singles were both in the top 100 most frequently played tracks on Triple J in 2012, and the band were able to leverage this exposure in securing a record deal with Dew Process, along with being selected as part of the competitive peer review process for festival performances such as Splendour in the Grass. The work received positive peer reviews, with indieshuffle writing: “Brisbane's Art of Sleeping are a truly talented band. … the five-piece gained plenty of local attention earlier this year with their stunning single "Empty Hands.” This was the first single off their new EP, Like a Thief, which was produced by the renowned Yanto Browning (The Medics, The Jungle Giants) … The EP includes five tracks of incredible power and sentiment … Title track "Like a Thief” is … [a] standout, again a vast and expansive song which showcases the band's completeness”

A comparative study of Sr-incorporated mesoporous bioactive glass scaffolds for regeneration of osteopenic bone defects

SUMMARY: Recently, the use of the pharmacological agent strontium ranelate has come to prominence for the treatment of osteoporosis. While much investigation is focused on preventing disease progression, here we fabricate strontium-containing scaffolds and show that they enhance bone defect healing in the femurs of rats induced by ovariectomy. INTRODUCTION: Recently, the use of the pharmacological agent strontium ranelate has come to prominence for the treatment of osteoporosis due to its ability to prevent bone loss in osteoporotic patients. Although much emphasis has been placed on using pharmacological agents for the prevention of disease, much less attention has been placed on the construction of biomaterials following osteoporotic-related fracture. The aim of the present study was to incorporate bioactive strontium (Sr) trace element into mesoporous bioactive glass (MBG) scaffolds and to investigate their in vivo efficacy for bone defect healing in the femurs of rats induced by ovariectomy. METHODS: In total, 30 animals were divided into five groups as follows: (1) empty defect (control), (2) empty defects with estrogen replacement therapy, (3) defects filled with MBG scaffolds alone, (4) defects filled with MBG + estrogen replacement therapy, and (5) defects filled with strontium-incorporated mesopore-bioglass (Sr-MBG) scaffolds. RESULTS: The two groups demonstrating the highest levels of new bone formation were the defects treated with MBG + estrogen replacement therapy and the defects receiving Sr-MBG scaffolds as assessed by μ-CT and histological analysis. Furthermore, Sr scaffolds had a reduced number of tartrate-resistant acid phosphatase-positive cells when compared to other modalities. CONCLUSION: The results from the present study demonstrate that the local release of Sr from bone scaffolds may improve fracture repair. Future large animal models are necessary to investigate the future relationship of Sr incorporation into biomaterials.

Demand for refilled reusable products

The conversion of one-way polyethylene terephthalate (PET) bottles into reusable bottles helps reduce environmental burden. Recently, the Ministry of the Environment in Japan began discussing the introduction of reusable bottles. One of the barriers to introducing the new type of bottle is consumer unwillingness to accept refilled reusable bottles. We administered the questionnaires to consumers in a pilot test on reusable PET bottles organized to analyze the demand for these products. To increase the demand for refilled reusable bottles, it is necessary to supply refilled reusable bottles that are acceptable to consumers who are concerned about container flaws and stains.

Abundance and prevalence of Aedes aegypti immatures and relationships with household water storage in rural areas in southern Viet Nam

Since 2000, the Government of Viet Nam has committed to provide rural communities with increased access to safe water through a variety of household water supply schemes (wells, ferrocement tanks and jars) and piped water schemes. One possible, unintended consequence of these schemes is the concomitant increase in water containers that may serve as habitats for dengue mosquito immatures, principally Aedes aegypti. To assess these possible impacts we undertook detailed household surveys of Ae. aegypti immatures, water storage containers and various socioeconomic factors in three rural communes in southern Viet Nam. Positive relationships between the numbers of household water storage containers and the prevalence and abundance of Ae. aegypti immatures were found. Overall, water storage containers accounted for 92–97% and 93–96% of the standing crops of III/IV instars and pupae, respectively. Interestingly, households with higher socioeconomic levels had significantly higher numbers of water storage containers and therefore greater risk of Ae. aegypti infestation. Even after provision of piped water to houses, householders continued to store water in containers and there was no observed decrease in water storage container abundance in these houses, compared to those that relied entirely on stored water. These findings highlight the householders’ concerns about the limited availability of water and their strong behavoural patterns associated with storage of water. We conclude that household water storage container availability is a major risk factor for infestation with Ae. aegypti immatures, and that recent investment in rural water supply infrastructure are unlikely to mitigate this risk, at least in the short term.

Metal artifacts from titanium and steel screws in CT, 1.5T and 3T MR images of the tibial Pilon: A quantitative assessment in 3D

Radiographs are commonly used to assess articular reduction of the distal tibia (pilon) fractures postoperatively, but may reveal malreductions inaccurately. While Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) are potential 3D alternatives they generate metal-related artifacts. This study aims to quantify the artifact size from orthopaedic screws using CT, 1.5T and 3T MRI data. Three screws were inserted into one intact human cadaver ankle specimen proximal to and along the distal articular surface, then CT, 1.5T and 3T MRI scanned. Four types of screws were investigated: titanium alloy (TA), stainless steel (SS) (Ø = 3.5 mm), cannulated TA (CTA) and cannulated SS (CSS)(Ø = 4.0 mm, Ø empty core = 2.6 mm). 3D artifact models were reconstructed using adaptive thresholding. The artifact size was measured by calculating the perpendicular distance from the central screw axis to the boundary of the artifact in four anatomical directions with respect to the distal tibia. The artifact sizes (in the order of TA, SS, CTA and CSS) from CT were 2.0 mm, 2.6 mm, 1.6 mm and 2.0 mm; from 1.5T MRI they were 3.7 mm, 10.9 mm, 2.9 mm, and 9 mm; and 3T MRI they were 4.4 mm, 15.3 mm, 3.8 mm, and 11.6 mm respectively. Therefore, CT can be used as long as the screws are at a safe distance of about 2 mm from the articular surface. MRI can be used if the screws are at least 3 mm away from the articular surface except SS and CSS. Artifacts from steel screws were too large thus obstructed the pilon from being visualised in MRI. Significant differences (P < 0.05) were found in the size of artifacts between all imaging modalities, screw types and material types, except 1.5T versus 3T MRI for the SS screws (P = 0.063). CTA screws near the joint surface can improve postoperative assessment in CT and MRI. MRI presents a favourable non-ionising alternative when using titanium hardware. Since these factors may influence the quality of postoperative assessment, potential improvements in operative techniques should be considered.

Finding country

The Finding Country Exhibition seeks a pluralist contest between the traditions of aboriginal space (Country), and European space (property) in Australia. Aboriginal Country is excluded from the Australian city. The city of Brisbane, located on the aboriginal Country of the Turrbal people, is the common ground of this confrontation. It is the show Australia rejected. Despite the 1992 landmark Mabo case High Court decision, a decision that struck down the doctrine of terra nullius (an empty land belonging to no-one), architecture in Australia continues its 18th century European tradition of drawing on empty paper. The aboriginal position is that this paper is not empty, but is full of what can’t be seen. The aboriginal map of Australia reveals a continent with many Countries and many spaces. The prevailing spectrum of architectural positions, bookended by decorated sheds and metaphysical decks, continues to bring aboriginal Country into decline. If the opposite position is considered it is possible to find something lost. Cities historically enter states of decline, frequently associated with some form of catastrophe. Others end in a whimper. It is not unreasonable to imagine an opportunity for the recovery of Country through decline. The central exhibit is an 8×3m drawing of the city of Brisbane consisting of approximately 50 individual grid submissions emptied by half to find something special. Each grid is an explicit architectural negotiation with decline, whilst carrying an implicit personal challenge to non-aboriginal architects to engage Country. Since 2006, the Finding Country project has endeavoured to assert an aboriginal origin for architecture in Australia. It is led and directed by Kevin O’Brien a descendent of the Kaurareg and Meriam people of north-eastern Australia, and an architect working in Brisbane.

Development of an electronic role-play assessment initiative in bioscience for nursing students

Devising authentic assessments for subjects with large enrolments is a challenge. This study describes an electronic role-play assessment for approximately 600 first-year nursing students to learn and apply pathophysiology (bioscience) concepts to nursing practice. Students used Microsoft Office PowerPoint® to prepare electronic role-plays both between a nurse and patient, and between two nurses, thus simulating workplace scenarios. Student feedback demonstrated that respondents found this assessment useful for learning pathophysiology, and for applying pathophysiology to a nursing clinical setting. This electronic presentation circumvented issues associated with a traditional oral presentation such as embarrassment and logistics of scheduling groups, and rated well with students of non-English speaking background. The electronic role-play assessment initiative encouraged students to apply their bioscience knowledge to a clinical setting, and allowed students to conceptualise the importance of bioscience within both the nursing degree and the profession.

Evaluation of the Australian Performing Arts Market 2014-2018 - Year One Report

The Australia Council awarded the tender of APAMs 2014, 2016 and 2018 to the Brisbane Powerhouse. The Australia Council, in awarding the contract for the presentation of APAM by Brisbane Powerhouse, stipulated that a formal evaluation of the three iterations of APAM and activity in the intervening years be undertaken. Queensland University of Technology, Creative Industries Faculty, under the leadership of Associate Professor Sandra Gattenhof, were contracted to undertake the formal evaluation. This is the first year report on the Brisbane iteration of the Market. This report has drawn from data collected across a range of sources, drawing on the scoping study undertaken by Justin Macdonnell addressing the Market from 1994–2010; the tender document submitted by the Brisbane Powerhouse; in-person interviews with APAM staff, APAM Stakeholders, Vox Pops from delegates in response to individual sessions, producer company/artist case studies and, most significantly, responses from a detailed online survey sent to all delegates. The main body of the report is organised around three key research aims, as outlined in the Brisbane Powerhouse Tender document (2011). These have been articulated as: Evaluation of international market development outcomes through showcasing work to targeted international presenters and agents Evaluation of national market development outcomes through showcasing work to national presenters and producers Evaluation of the exchange ideas, dialogue, skill 
development, partnerships, collaborations and co- productions and networks with local and international peers. The culmination of the data analysis has been articulated through five key recommendations, which may assist the APAM delivery team for the next version, in 2016. In summary, the recommendations are described as: 1. Indigenous focus to remain central to the conception and delivery of APAM 2. Re-framing APAM’s function and its delivery 3. Logistics and communications in a multi-venue approach, including communications and housekeeping, volunteers, catering, re-calibrating the employment of Brisbane Powerhouse protocols and processes for APAM 4. Presentation and promotion for presenters 5. Strategic targeting of Asian producers.

Jugglers Arts Space Containers

The design and installation for the Jugglers Arts Space Containers was an invited commission by Jugglers Arts Space for the Containveral Festival at Northshore Hamilton (EDQ). The community festival involved a suite of custom designed and fitted shipping containers for the use by retailers and arts groups alike, focusing upon re-use and low cost design fabrication approaches. Containerval, inspired from shipping container projects such as Sean Goodsell's 'Future Shack' (1985-2001)and Buchan Group's Re:Start Mall, Christchurch (2011), celebrated design testing and exploration of found and recyclable materials to plan and enrich an otherwise severe hardstand area formally attached to Portside docks. The design proposed use of 4 containers, planned to focus on both the interior displays and external in-between spaces, for live performance of Jugglers Arts Space artists. Experimentation of recyclable materials such as onion bags and plastic milk bottles, informed the development of innovative low-cost canopies which sutured the containers together. The Containerval Festival contributed to the now highly successful 'Eat Street Markets' at Hamilton Northshore.

Wolf Creek, rurality and the Australian gothic

As with Crocodile Dundee before it, the recent Australian film Wolf Creek promotes a specific and arguably urban-centric understanding of rural Australia. However, whilst the former film is couched in mythologized notions of the rural idyll, Wolf Creek is based firmly around the concept of rural horror. Wolf Creek is both a horror movie and a road movie, one which relies heavily upon landscape in order to tell its story. Here we argue that the film continues a tradition in the New Australian Cinema of depicting the outback and its inhabitants as something the country's mostly coastal population do not understand. Wolf Creek skilfully plays on popular conceptions of inland Australia as empty and harsh. But more than this, the film brings to the fore tensions in the rural idyll associated with the ownership and use of rural space. As an object of urban consumption, rural space may appear passive and familiar, but in the context of rural horror iconic aspects of the Australian landscape become a source of fear – a space of abjection.