723 resultados para compactação de abomaso
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This conclusion thesis has the objective of produce substrates of Silicon Carbide from the powder of SiC for aerospace use. The powder of SiC was pressed in cylindrical form by the process called “wet way”. For the inicial pressing process was used a uniaxial squeezer and after that was used a isostatic squeezer, after that the samples were synthesized. The next step was the machining and polishing to improve the features of the surface of the sample. Then the roughness was measured, as also the Arquimedes method and optical microscopy and scanning eletron microscopy. Some innovations were done, in one of the lots little vacancys were done with organic material or silicon to reduce the weight of the sample; and the other innovation were the use of a slip film of SiC on the surface of the sample, that were after synthesized with LASER to reduce the roughness, in this samples the roughness were reduce in 50 % if compared with the other samples
Resumo:
Of the four lacustrine deltaic models, which were found in the Pendência formation, two are represented in the Serraria field. Respectively the deltaic models 1 and 3 shows the reservoir zones A and B. The Zone A is divided into six sub-areas. Each is representing a smaller cycle of development of sigmoidal lobes of deltaic front. Zone B produces in reservoirs of Model 3, or so called Full delta. The Zone B is formed by overlapping the deltaic plain system over the deltaic/prodeltaic front (model 1). This work uses the method of zooming with the aim to contextualize the geometric aspects of the sand bodies, highlighting the analysis of facies and diagenesis with help of pictures and testimonies of thin sections. The sigmoidal lobes of Zone A are fine to very fine sandstones, well sorted, with a arcosian composition.;practically with a weak compaction and cementation of a kind of film of clay (if very fine) and overgrowth feldspar (fine texture). This silicate phases are succeeded by cementation of poiquilotópica calcite, and after this a stage of dissolution, containing only regular permoporosity for this reservoir. Zone B has a combination of two types of deltaic plain reservoir. One is the rarest of distributary channel and the other the most common of lobes of crevasse. In the channel coarse to medium-grained and poor to moderate sorted sandstones are formed (tuning up), and with a lytic arcosiana nature. Rarely there are cements, including growth of feldspar and rhombohedral dolomite, which prevent a high permoporosity of the reservoir. In the crevasse lobes, the sandstones are laminated, fine and well sorted, arkosic, rarely with overgrowth feldspar and calcite poiquilotópica, and with a good intergranular permoporosity
Resumo:
The Ambrósio dome is a granodioritic batholiths of elliptical geometry, 40km length in the N-S direction and variable width of up to 8 km, has a weakly deformed nucleus with intensely deformed margins, in its northern portion is intruded in orthogneiss that belong to the Archean basement, and its southern part comes in direct contact with the volcano-sedimentary sequence of Paleoproterozoic Rio Itapicuru Greenstone Belt (RIGB), Bahia. From geological mapping on 1:25:000 scale were recognized two structural domains, termed West Domain and East Domain. From investigation of these domains was identified a major shear zone, which puts in contact two distinct stratigraphic sequences, one west, consisting primarily of metavulcanic and metapyroclastic rocks with records of low-grade regional metamorphism, and east discontinuity a metassedimentary domain, with record of gradational contact metamorphism, deformation and compression generated from the rise of Ambrosio Pluton. Such records put into question the structural and stratigraphic models in the literature so far
Resumo:
Supermarket plastic bags are produced by high density polyethylene (HDPE) and low density polyethylene (LDPE) resins. In Brazil, are produced annually around 150 plastic bags per capita. Disposed in landfills, the supermarket plastic bags prevent the passage of water by slowing the breakdown of biodegradable materials and hindering compaction of waste, according to their low degradability. This work investigated the biodegradation of PE bags containing additive oxo-biodegradable and bags without additives: buried in soil columns, exposed in a controlled environment and exposed to air. The analysis methods used to assess the changes brought in the bags with respect to microbial action and exposure time were weight loss, thickness measurement, infrared (FTIR), scanning electron microscopy (SEM) and contact angle. The results showed that the use of prodegradant agents such as oxobiodegradable additives in polyethylene bags, buried in soil for 270 days, was not efficient to accelerate the biodegradation by microorganisms. It seems that these additives have been more efficient to degrade the colored pigmentation of printed bags, under the influence of light and heat.
Resumo:
Females of the painted turtle, Trachemys scripta, have an annual reproductive cycle. Their nest periods in Brazil starts around September and they lay about 7 - 10 eggs in nests dug in the soil. The eggs hatch in December. It is possible that the nest cover cause problems for the gas diffusion, also, the rain can wet or compact the soil covering the nest, or even soaked the whole area. Those problems may change the nests intern atmosphere decreasing O2 partial pressure (hypoxia) and increasing CO2 partial pressure (hypercarbia). The main objective of this study was to determine if and how hypercarbia (3% and 6%CO2), could influence the eggs and early posthatching development of the Trachemys scripta. We used three experimental groups of eggs incubated in: normal atmosphere (Control group CG, n = 14), hypercarbia with 3% of CO2 (G3%, n = 16) and with 6% of CO2 (G6%, n = 15). The profile of the mass increment during the egg development were not different among the groups, GC = 9.89±0.81g; G3% = 10.11±0.60g and G6% = 10.58±0.36g. In addition, the mass of the post-hatching turtles were the not different. There were not differences between the duration of the incubation period among the experimental groups, GC = 60.12±0.97days, G3% = 59.00±0.98days and G6% = 60.80±1.14days. The mortality rates were not affected by the hypercarbia, GC = 0.43 (43%), G3% = 0.27 (27%) and G6% = 0.37 (37%). Furthermore, the mass increment and the metabolic rate were the same among the early development of the turtles until 3 month after hatching. We conclude that hypercarbia (up to 6% of CO2) does not cause any alteration on the eggs or post-hatching normal development. It is possible that the combination of hypercarbia and hypoxia change those results
Resumo:
When handling soil conservation practices isn’t applied correctly, they cause problems at the level of structure, cohesion and fertility in soils and lack of water availability. In the case of this monograph, conducted in a rural property located at Álvares Machado City, identified that most areas are intended for use activities of beef cattle and dairy and subsistence agriculture, which historically addition to withdraw native flora, resulting in problems such as compaction and increase soil exposure to climatic agents, generating a serious frame of erosion problems. In the case of water from rainfall, the soil exposed, causes the “splash” effect and therefore when it becomes runoff carries the spalled particles mainly for low land areas. Without the vegetation, especially trees or shrubs species, the velocity of runoff increases, initiating the appearance of furrows, which consequently may become a kind of ravine erosion and gully, which makes invalid any area in your surroundings... (Complete abstract click electronic access below)
Resumo:
Pós-graduação em Agronomia (Ciência do Solo) - FCAV
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Several alloys present the shape memory effect and among them, the equiatomic NiTi alloy, nitinol, is the most important one. It is usually used in several engineering applications and also in biomedical devices, in the fabrication of orthodontic wire, stents and Judet staples. Although a considerable amount of these biomedical devices is utilized in Brazil and a fraction of it is already made here, all nitinol used is bought abroad. Thus, it is important to develop the necessary know-how to fabricate NiTi wire and sheet. It would mean less importation with job creation and wealth generation for the country. In this work nitinol was obtained powder metallurgy from elemental powders of Ti and Ni using uniaxial compression and uniaxial compression followed by isostatic compression. The final densities achieved were determined by the Archimedes method. The precipitation of intermetallic secondary phases was studied and the samples were characterized by metallographic analysis, optical microscopy and X-ray diffraction. Results indicated that 50 hours sintering route showed a low amount of intermetallics, and no trace of unreacted powder. XRD and metallography at room temperature indicated B19’ as the predominant phase, which corresponds to martensite. Although density results showed little dispersion, the most dense sample was compacted under uniaxial compression and presented 4.8 g/cm3, corresponding to 20.84% porosity. Density variation was considered normal to the measurement process and independent of the compaction mode
Resumo:
Pós-graduação em Zootecnia - FCAV
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Based on the lack of information regarding the morphology of marsh deer, this work aims to describe some morphological aspects of the gastric chamber in this species, collaborating with future investigations, mainly related to rational handling in this cervid. This work aimed to describe the morphology of the gastric chamber of the marsh deer, characterizing the external and internal macroscopical details and the microscopical architecture of these structures by light microscopy. Macroscopically, the marsh deer stomach is formed by the rumen, reticulum, omasum and abomasum similar to the domestic ruminants. Microscopically, rumen and abomasum are similar to the domestic ruminants. The reticulum and the omasum, however, present specific characteristics such as keratin on the top of the reticulum, small epithelial projections and omasum folds covered with discrete papillae.
Resumo:
Pós-graduação em Geografia - FCT