Comportamento dinâmico de suspensão eletromecânica: análise da resposta devido ao amortecimento e à rigidez não linear

Pós-graduação em Engenharia Elétrica - FEB

Rerrefino de óleo lubrificante usado

The lubricant oil used in engines of internal combustion must be, periodically, changed. Its mainly function in the engines is to reduce the friction between the pieces, but its presence also promotes the cleanness and the refrigeration of the equipment. These attributions, at the end of some cycles of operation, make the oil to be dirty, that is, full of contaminating substances such as water, gasoline, diesel, additives, oxidized hydro-carbons and rests of metals, not being recommended, therefore, its discarding in the environment. Thus, all the used lubricant oil that leaves the automobiles engine has been thrust, waiting for a solution. The pollution generated by the discarding of a ton of used oil per day in the soil or in the rivers is equivalent to a domestic sewer of 40 thousand of people. The indiscriminate burning of the used lubricant oil generates significant emissions of metallic oxides, besides other toxic gases, like the dioxin and sulphur oxides. In this context, the mean objective of this essay was to effectuate the rerrefine of the used lubricant oil, aiming the increase of its life cycle and consequently contributing for the reduction of the environmental pollution. According to the used process, it was possible to get a rerrefine oil, of good quality, which physicistchemistries properties are in compliance with the norms of NBR and ASTM

Projeto CHRONOS - desenvolvimento e aplicação de um sistema de freios automotivo

The automobilist Market is more competitive each day, with new products developed by great technological innovations, daily challenging new concepts of Engineering. This monograph aims to explain the development of a brake system project completely, with emphasis on preliminary calculations made from a worksheet in Excel, for a better understanding of the components, which can be improved further in order to achieve the goals of company. It is through the preliminary calculations that we can have a reasonable first system estimate. The whole set is then analyzed for performance, cost and mass by competitors benchmarking. In terms of confidentiality, all data is fictional, but viable. The motivation for this study is approach an extracurricular topic, which essence is designing, base of engineering. The results obtained in software and field tests prove the validity of the study and assist in the continuous improvement of product development

Modelo de flexibilidade de manufatura em processos de submontagem

Through observation of production process of a Vale do Paraiba’s automobile industry, one can encounter in need of improvement related to large uncertainties and variations in the production environment, a fact that inspired the search for solutions that can respond quickly to these changes. This way, the paper describes the development of a flexible manufacturing model, which aims to optimize the process in an automotive sub-assembly industry of the Paraíba Valley. The main objective is to propose a method to promote viable alternatives to easing the assembly of parallel sub performed the assembly of cars. For the construction of the model was necessary to explore concepts of flexible manufacturing and making the data presented in literature, which were vital to ensure the development of the method. The concepts discussed are usually presented at an undergraduate degree in Engineering. Data compiled by the model are able to serve as a strategic benchmark for decision making by managers. Featuring alternative response variables and uncertainties of the organizational environment, a fact that facilitates the management of human resources and productive

Análise dos acidentes automobilísticos atendidos no Hospital das Clínicas no ano de 2010, Botucatu

As a result of the 20th-century industrial development, and particularly after World War II, cars have become an important consumer good, and this has led to a large number of circulating vehicles. To this day, the number of cars has increased exponentially worldwide, which results in a high number of traffic accidents (TAs) every day. TAs are responsible for 1.2 million deaths worldwide each year, and in Brazil, they are considered to be a public health problem, considering that its traffic is regarded as one of the worst and most dangerous in the world. In addition to temporary or permanent physical disabilities that bring great harm to individuals, accidents also cause psychological disorders, such as the post-traumatic stress disorder. Hence, considering the importance of TAs in the country and their outcomes, this study aimed at investigating the epidemiological aspects of car accidents occurring in 2010 who were assisted in the emergency room of a university hospital in São Paulo state. By means of records made by the nursing team and medical records analysis, it was possible to extract a stratified sample of 88 cases involving adults and eight cases involving children. The sample was analyzed by the SAS software for Windows, version 9.2. As regards the accidents involving adults, there was a predominance of males (67%), with an approximate 2:1 ratio in relation to females. The victims’ most frequent age range was 20-29 years (39%), and they were mostly single (56%). The month showing the largest number of occurrences was July, with 17%, and the weekday was Sunday, with 25%. Showing 32%, the time period when most accidents occurred was from 06:00 o’clock p.m. to 11:59 p.m. As regards vehicles types involved, motorcycles were in first place, with 47% of cases, and the most common accident type was crashing between vehicles, with 43%... (Complete abstract click electronic access below)

Smart Grid e Carros Elétricos - Influência da Carga de Carros Elétricos Sobre o Sistema Elétrico

The technologies are advancing at a pace so expressive that allow the increase of the power quality from generation until the distribution to end customers. This improvement has been made possible through the automation of the energy that follows to a better quality of the energy provided, a lower energy supply disruptions and a very short recovery time. The trend of today and the near future is the distributed energy generation. To keep the automated control of the chain, the presence of Smart Grids is needed and that will be the most efficient and economical way to manage the entire system. Within this theme, is going to be necessary analyze the electric cars that promise to promote a more sustainable transport because it doesn’t uses fossil fuels, and more healthy because it does not emit pollutants into the atmosphere. The popularization of this type of vehicle is estimated to happen in a few decades and the case study analyzing its influence on the demand of the electrical system is something that will be very important in the near future. This paper presents a study of the influence of the inclusion of charges refering to electric cars

Estudo de causas de falhas em selos mecânicos de bombas centrífugas para circulação de óleo térmico

This study is about a heating line that uses thermal oil. It is located in a facility that produces interlayers used in cars windshields. A plastic resin is melted and is sent to a matrix called DIE where the interlayers are produced. The DIE needs to receive heat from the circulation of thermal oil in four different regions of its interior, to ensure the correct thickness of the interlayer. The thermal energy is provided by electric heaters and the flow of thermal oil is impelled by four mechanically sealed centrifugal pumps (one per region). The key point of this study is the fact that these four pumps of the system have reported successive failures in the mechanical seals. Apparently, a poorly designed project has burdened the system intermittently. The pumps operation condition is located in a region of low efficiency, according to the characteristic curves. This fact is the source of the noticeable reduced time between failures. Changes in the configuration of the facility and in the number of pumps will be proposed, aiming to achieve higher operational efficiency. The proposals will be mathematically analyzed according to the Hydraulic Institute criteria. At the same time, we will also keep focus on an in-depth study of a heating system structure, starting with a detailed approach for each component and discussion about its real need and economic viability. At the end of this paper it is shown that the gain in efficiency achieved with the new proposed configuration reflects not only in the reduction of maintenance costs, but also a potential improvement in energy efficiency. It is shown that these two aspects are closely related and together form the basis for the design of a reliable and efficient pumping system

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Estudo de cerâmicas avançadas para fins de blindagem balística

The research involving new materials has always been considered as a differential in the development of a technology company. This occurred naturally since ancient times, often motivated by reasons of a certain age, where the most common material used was also the name of your time and may be cited as an example the Bronze Age, and later was the Iron. Currently, the use of firearms are they used in resolving conflicts between countries, or a more equivocal, as an instrument of social banditry make innovations in the area of shielding welcome, whether for personal use, in the form of vests or vehicle such as cars, tanks and even aircraft. In this context, is a Silicon Carbide Ceramic, with low density and high hardness. Thus, the aim of this study is the evaluation and comparison of these materials, seeking to improve their properties by means of additives such as boron and silicon metal and amorphous YAG. For this work, the specimens were pre-shaped by means of uniaxial later to be referred for isostatic pressing and sintering. The maximum percentage for each additive was 5%, except for the YAG whose percentage was 8.2% (mass percentage). All compositions were subjected to the same tests (x-ray diffraction, apparent density, optical microscopy, Vickers hardness, scanning electron Microscopita), so that one could draw a comparison between the materials under study, samples that showed better mechanical properties and micro structural, related here by hardness testing and microscopy (optical and SEM) were the silicon carbide doped with YAG and alumina samples, demonstrating the potential of these materials for ballistic protection. Other compositions have high porosity, which is highly undesirable, since in order to harmful influences on the mechanical properties discussed below

Estimativa das emissões de monóxido de carbono por veículos automotivos na cidade de Campinas/SP utilizando o modelo CAL3QHCR

Air pollution is an environmental issue worldwide and frequently cause negative effects on population health and ecosystems on cities. The relationship between climate and atmospheric pollution can be used as a surrogate to the intensity of air pollution. The present and quantity of some gases can be used as indicators to air quality: particulate matter (PM), sulfur dioxide (SO2), carbon monoxide (CO), ozone (O3), and nitrogen dioxide (NO2). Among those gases, CO has its major source within the cities, where automobiles are the main emitter. But measure pollutant concentration are challenging, sometimes because the lack of good equipments due to high costs and of the large variability of models that varies in precision, way of measure and distribution of sellers. Modeling are useful when there are an intend to evaluate air pollution, its sources and evaluate scenarios. This work aims to use CAL3QHCR model developed by the U.S Environmental Protection Agency (EPA) to generate predictive surfaces of CO concentration distribution on a site within Campinas city, located in São Paulo state, Brazil. CAL3QHCR model use data urban automobile circulation to generate spatial results for CO distribution. We observed that the pollution concentration was lower on our modeling than the concentrations measured by Companhia Ambiental do Estado de São Paulo (CETESB), the main environmental company on the São Paulo state. Also the correlation between average estimates of our model and the measure by CETESB was weak, indicating that the model used on this study need to be or better parameterized, or the scale we measured of CO emissions need to be rescaled. Although the model failed to correlate to CETESB data, maybe one that explore the estimated emissions distributed within the sites to understand spatial distributions of CO on the regions. Also, the generated information can also be used to other studies, and come to be useful to explain heat island

Planejamento do transporte urbano sustentável: uso de bicicletas no município de São Paulo-SP

From its foundation until nowadays, the city of São Paulo has undergone major transformation processes, one of the responsibles for these changes is the presence of efficient transportation ; From construction of roads and routes for the animal traction transportation, railroads, expansion and improvements to the introduction of the automobiles, highways, subway system, among others, all these changes are related to greater flow of people and goods. However nowadays has been reflected issues such as quality of life and development of society in a sustainable way, once we have the construction and reconstruction of space in benefit of capital, and therefore the valuation of individual motorized transport. The overuse of individual motor vehicles are generating an urban chaos, making it increasingly difficult to transit in big cities, the use of bicycles is presented as a viable modal alternative, allowing the flow, and enhancing the health of society and quality of the air

Estudo sobre o funcionamento de sistema de controle de tração em veículos automotores

This study explores the subject of traction control systems through bibliografy review on the spot of Mechanical Engineering. This paper has the objetivo of high light the main components and tecnology involved since MaxTrac system in 1971. It describes systems controled by throttle valve and breaks. Additionally, it i also presented basic knowlodged regarding electronic control unit and wheel sensors

Telemetria automotiva usando módulo de transmissão Wireless Zigbee

This paper presents a design and construct the system of data acquisition with wireless transmission of some important parameters like motor temperature, motor rotation and velocity of Unesp Racing´s formula car prototype from Universidade Estadual Paulista, Campus Guaratinguetá. This system development presents a contribution for the electrical technical features adding important points in the competition due car´s electric, in addition, enables preventive maintenance and fine adjustment of the car with the data obtained during training and racing

Sistema de gerenciamento de energia para controle de carga/descarga entre baterias de lítio e ultracapacitores, envolvendo sistema de tração elétrica com frenagem regenerativa

Pós-graduação em Engenharia Elétrica - FEIS

Análise de causas de trincas em carro de translação de empilhadeira/recuperadora

The present work aims to study the possible causes of cracks founded and recovered in translation cars of ore Forklift / ore Reclaimer. To identify the possible causes of cracks observed on the equipment it was used a static approach analysis, using a finite element method as an analysis tool, using a specific structural analysis program. After making the model, a strain gage measurement was necessary because there may be significant amounts of masses of non-structural components that were not modeled and were not available in the drawings, as well as fouling ore. With the calibrated model it was processed analyses with the load cases of dead load, product, wind and excavation. After the processing, it was observed that none of these load cases resulted in values that caused the crack, so another three hypotheses were tested: depression and misalignment, jacking and translation of only three cars. Of these three hypotheses it was observed that the jacking coud be the cause of the cracks, because the distribution of stress. Due to the miss of parameters, like the height utilized in this process, it was not possible to affirm the real stress level