Quality of life and application of the transtheoretical model to diabetes self -management behaviors in older adults with type 2 diabetes

One in five adults 65 years and older has diabetes. Coping with diabetes is a lifelong task, and much of the responsibility for managing the disease falls upon the individual. Reports of non-adherence to recommended treatments are high. Understanding the additive impact of diabetes on quality of life issues is important. The purpose of this study was to investigate the quality of life and diabetes self-management behaviors in ethnically diverse older adults with type 2 diabetes. The SF-12v2 was used to measure physical and mental health quality of life. Scores were compared to general, age sub-groups, and diabetes-specific norms. The Transtheoretical Model (TTM) was applied to assess perceived versus actual behavior for three diabetes self-management tasks: dietary management, medication management, and blood glucose self-monitoring. Dietary intake and hemoglobin A1c values were measured as outcome variables. Utilizing a cross-sectional research design, participants were recruited from Elderly Nutrition Program congregate meal sites (n = 148, mean age 75). ^ Results showed that mean scores of the SF-12v2 were significantly lower in the study sample than the general norms for physical health (p < .001), mental health (p < .01), age sub-group norms (p < .05), and diabetes-specific norms for physical health (p < .001). A multiple regression analysis found that adherence to an exercise plan was significantly associated with better physical health (p < .001). Transtheoretical Model multiple regression analyses explained 68% of the variance for % Kcal from fat, 41% for fiber, 70% for % Kcal from carbohydrate, and 7% for hemoglobin A 1c values. Significant associations were found between TTM stage of change and dietary fiber intake (p < .01). Other significant associations related to diet included gender (p < .01), ethnicity (p < .05), employment (p < .05), type of insurance (p < .05), adherence to an exercise plan (p < .05), number of doctor visits/year ( p < .01), and physical health (p < .05). Significant associations were found between hemoglobin A1c values and age ( p < .05), being non-Hispanic Black (p < .01), income (p < .01), and eye problems (p < .05). ^ The study highlights the importance of the beneficial effects of exercise on quality of life issues. Furthermore, application of the Transtheoretical Model in conjunction with an assessment of dietary intake may be valuable in helping individuals make lifestyle changes. ^

Double decomposition : decomposing the variance in subcomponents of male extra-pair reproductive success

Peer reviewed

Double decomposition : decomposing the variance in subcomponents of male extra-pair reproductive success

Peer reviewed

Double decomposition : decomposing the variance in subcomponents of male extra-pair reproductive success

Peer reviewed

Is socioeconomic position early in life associated with physical activity during adulthood following the accumulation of risk model with additive effects?

L'activité physique améliore la santé, mais seulement 4.8% des Canadiens atteignent le niveau recommandé. La position socio-économique est un des déterminants de l'activité physique les plus importants. Elle est associée à l’activité physique de manière transversale à l’adolescence et à l’âge adulte. Cette thèse a tenté de déterminer s'il y a une association à long terme entre la position socio-économique au début du parcours de vie et l’activité physique à l’âge adulte. S'il y en avait une, un deuxième objectif était de déterminer quel modèle théorique en épidémiologie des parcours de vie décrivait le mieux sa forme. Cette thèse comprend trois articles: une recension systématique et deux recherches originales. Dans la recension systématique, des recherches ont été faites dans Medline et EMBASE pour trouver les études ayant mesuré la position socio-économique avant l'âge de 18 ans et l'activité physique à ≥18 ans. Dans les deux recherches originales, la modélisation par équations structurelles a été utilisée pour comparer trois modèles alternatifs en épidémiologie des parcours de vie: le modèle d’accumulation de risque avec effets additifs, le modèle d’accumulation de risque avec effet déclenché et le modèle de période critique. Ces modèles ont été comparés dans deux cohortes prospectives représentatives à l'échelle nationale: la 1970 British birth cohort (n=16,571; première recherche) et l’Enquête longitudinale nationale sur les enfants et les jeunes (n=16,903; deuxième recherche). Dans la recension systématique, 10 619 articles ont été passés en revue par deux chercheurs indépendants et 42 ont été retenus. Pour le résultat «activité physique» (tous types et mesures confondus), une association significative avec la position socio-économique durant l’enfance fut trouvée dans 26/42 études (61,9%). Quand seulement l’activité physique durant les loisirs a été considérée, une association significative fut trouvée dans 21/31 études (67,7%). Dans un sous-échantillon de 21 études ayant une méthodologie plus forte, les proportions d’études ayant trouvé une association furent plus hautes : 15/21 (71,4%) pour tous les types et toutes les mesures d’activité physique et 12/15 (80%) pour l’activité physique de loisir seulement. Dans notre première recherche originale sur les données de la British birth cohort, pour la classe sociale, nous avons trouvé que le modèle d’accumulation de risque avec effets additifs s’est ajusté le mieux chez les hommes et les femmes pour l’activité physique de loisir, au travail et durant les transports. Dans notre deuxième recherche originale sur les données canadiennes sur l'activité physique de loisir, nous avons trouvé que chez les hommes, le modèle de période critique s’est ajusté le mieux aux données pour le niveau d’éducation et le revenu, alors que chez les femmes, le modèle d’accumulation de risque avec effets additifs s’est ajusté le mieux pour le revenu, tandis que le niveau d’éducation ne s’est ajusté à aucun des modèles testés. En conclusion, notre recension systématique indique que la position socio-économique au début du parcours de vie est associée à la pratique d'activité physique à l'âge adulte. Les résultats de nos deux recherches originales suggèrent un patron d’associations le mieux représenté par le modèle d’accumulation de risque avec effets additifs.

Problème des données manquantes dans un plan d'analyse de variance à mesures répétées

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Subtractive and additive manufacturing technology in moulding industry

This report is a review of additive and subtractive manufacturing techniques. This approach (additive manufacturing) has resided largely in the prototyping realm, where the methods of producing complex freeform solid objects directly from a computer model without part-specific tooling or knowledge. But these technologies are evolving steadily and are beginning to encompass related systems of material addition, subtraction, assembly, and insertion of components made by other processes. Furthermore, these various additive processes are starting to evolve into rapid manufacturing techniques for mass-customized products, away from narrowly defined rapid prototyping. Taking this idea far enough down the line, and several years hence, a radical restructuring of manufacturing could take place. Manufacturing itself would move from a resource base to a knowledge base and from mass production of single use products to mass customized, high value, life cycle products, majority of research and development was focused on advanced development of existing technologies by improving processing performance, materials, modelling and simulation tools, and design tools to enable the transition from prototyping to manufacturing of end use parts.

Investigation of additive effects in enantioselective copper-catalysed C-H insertion and aromatic addition reactions of α-diazocarbonyl compounds

Significant enhancements in enantioselectivities and reaction efficiencies in asymmetric copper-catalysed C-H insertion and aromatic addition reactions of α-diazocarbonyl compounds in the presence of various group I salts are reported. For the first time in carbenoid chemistry, evidence for the critical role of the metal cation is described.

A Delay Vector Variance based marker for an output-only assessment of structural changes in tension leg platforms

Although aspects of power generation of many offshore renewable devices are well understood, their dynamic responses under high wind and wave conditions are still to be investigated to a great detail. Output only statistical markers are important for these offshore devices, since access to the device is limited and information about the exposure conditions and the true behaviour of the devices are generally partial, limited, and vague or even absent. The markers can summarise and characterise the behaviour of these devices from their dynamic response available as time series data. The behaviour may be linear or nonlinear and consequently a marker that can track the changes in structural situations can be quite important. These markers can then be helpful in assessing the current condition of the structure and can indicate possible intervention, monitoring or assessment. This paper considers a Delay Vector Variance based marker for changes in a tension leg platform tested in an ocean wave basin for structural changes brought about by single column dampers. The approach is based on dynamic outputs of the device alone and is based on the estimation of the nonlinearity of the output signal. The advantages of the selected marker and its response with changing structural properties are discussed. The marker is observed to be important for monitoring the as- deployed structural condition and is sensitive to changes in such conditions. Influence of exposure conditions of wave loading is also discussed in this study based only on experimental data.

Problème des données manquantes dans un plan d'analyse de variance à mesures répétées

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

A Minor Change?: A Case Study of Carleton Place's Integration of Minor Variance Procedures into Ontario's Development Permit System

The Development Permit System has been introduce with minimal directives for establishing a decision making process. This is in opposition to the long established process for minor variances and suggests that the Development Permit System does not necessarily incorporate all of Ontario’s fundamental planning principles. From this concept, the study aimed to identify how minor variances are incorporated into the Development Permit System. In order to examine this topic, the research was based around the following research questions: • How are ‘minor variance’ applications processed within the DPS? • To what extent do the four tests of a minor variance influence the outcomes of lower level applications in the DPS approval process? A case study approach was used for this research. The single-case design employed both qualitative and quantitative research methods including a review of academic literature, court cases, and official documents, as well as a content analysis of Class 1, 1A, and 2 Development Permit application files from the Town of Carleton Place that were decided between 2011 and 2015. Upon the completion of the content analysis, it was found that minor variance issues were most commonly assigned to Class 1 applications. Planning staff generally met approval timelines and embraced their delegated approval authority, readily attaching conditions to applications in order to mitigate off-site impacts. While staff met the regulatory requirements of the DPS, ‘minor variance’ applications were largely decided on impact alone, demonstrating that the principles established by the four tests, the defining quality of the minor variance approval process, had not transferred to the Development Permit System. Alternatively, there was some evidence that the development community has not fully adjusted to the requirements of the new approvals process, as some applications were supported using a rationale containing the four tests. Subsequently, a set of four recommendations were offered which reflect the main themes established by the findings. The first two recommendations are directed towards the Province, the third to municipalities and the fourth to developers and planning consultants: 1) Amend Ontario Regulation 608/06 so that provisions under Section 4(3)(e) fall under Section 4(2). 2) Change the rhetoric from “combining elements of minor variances” to “replacing minor variances”. 3) Establish clear evaluation criteria. 4) Understand the evaluative criteria of the municipality in which you are working.

Transferability of Regional Permafrost Disturbance Susceptibility Modelling Using Generalized Linear and Generalized Additive Models

To effectively assess and mitigate risk of permafrost disturbance, disturbance-p rone areas can be predicted through the application of susceptibility models. In this study we developed regional susceptibility models for permafrost disturbances using a field disturbance inventory to test the transferability of the model to a broader region in the Canadian High Arctic. Resulting maps of susceptibility were then used to explore the effect of terrain variables on the occurrence of disturbances within this region. To account for a large range of landscape charac- teristics, the model was calibrated using two locations: Sabine Peninsula, Melville Island, NU, and Fosheim Pen- insula, Ellesmere Island, NU. Spatial patterns of disturbance were predicted with a generalized linear model (GLM) and generalized additive model (GAM), each calibrated using disturbed and randomized undisturbed lo- cations from both locations and GIS-derived terrain predictor variables including slope, potential incoming solar radiation, wetness index, topographic position index, elevation, and distance to water. Each model was validated for the Sabine and Fosheim Peninsulas using independent data sets while the transferability of the model to an independent site was assessed at Cape Bounty, Melville Island, NU. The regional GLM and GAM validated well for both calibration sites (Sabine and Fosheim) with the area under the receiver operating curves (AUROC) N 0.79. Both models were applied directly to Cape Bounty without calibration and validated equally with AUROC's of 0.76; however, each model predicted disturbed and undisturbed samples differently. Addition- ally, the sensitivity of the transferred model was assessed using data sets with different sample sizes. Results in- dicated that models based on larger sample sizes transferred more consistently and captured the variability within the terrain attributes in the respective study areas. Terrain attributes associated with the initiation of dis- turbances were similar regardless of the location. Disturbances commonly occurred on slopes between 4 and 15°, below Holocene marine limit, and in areas with low potential incoming solar radiation

Process Monitoring and Defect Detection of Additive Manufacturing Using Inline Coherent Imaging

With applications ranging from aerospace to biomedicine, additive manufacturing (AM) has been revolutionizing the manufacturing industry. The ability of additive techniques, such as selective laser melting (SLM), to create fully functional, geometrically complex, and unique parts out of high strength materials is of great interest. Unfortunately, despite numerous advantages afforded by this technology, its widespread adoption is hindered by a lack of on-line, real time feedback control and quality assurance techniques. In this thesis, inline coherent imaging (ICI), a broadband, spatially coherent imaging technique, is used to observe the SLM process in 15 - 45 $\mu m$ 316L stainless steel. Imaging of both single and multilayer builds is performed at a rate of 200 $kHz$, with a resolution of tens of microns, and a high dynamic range rendering it impervious to blinding from the process beam. This allows imaging before, during, and after laser processing to observe changes in the morphology and stability of the melt. Galvanometer-based scanning of the imaging beam relative to the process beam during the creation of single tracks is used to gain a unique perspective of the SLM process that has been so far unobservable by other monitoring techniques. Single track processing is also used to investigate the possibility of a preliminary feedback control parameter based on the process beam power, through imaging with both coaxial and 100 $\mu m$ offset alignment with respect to the process beam. The 100 $\mu m$ offset improved imaging by increasing the number of bright A-lines (i.e. with signal greater than the 10 $dB$ noise floor) by 300\%. The overlap between adjacent tracks in a single layer is imaged to detect characteristic fault signatures. Full multilayer builds are carried out and the resultant ICI images are used to detect defects in the finished part and improve upon the initial design of the build system. Damage to the recoater blade is assessed using powder layer scans acquired during a 3D build. The ability of ICI to monitor SLM processes at such high rates with high resolution offers extraordinary potential for future advances in on-line feedback control of additive manufacturing.

Comparazione strutturale di componenti realizzati a terra e nello spazio mediante tecniche additive

Questo lavoro di tesi mira ad indagare, a livello preliminare, quali siano i vantaggi e gli svantaggi a livello strutturale legati alla possibilità di realizzare componenti per mezzi spaziali con tecnologie di Rapid Prototyping direttamente nello spazio: questa possibilità verrà confrontata con il caso in cui gli stessi componenti siano realizzati a terra e poi inviati nello spazio con un lanciatore. Nonostante si siano riscontrati dei limiti derivanti dalla carenza di dati tecnici sulle caratteristiche meccaniche dei materiali, è stata sviluppata una metodologia che ha fornito l’opportunità, seppur con grandi approssimazioni, di valutare il problema. Il punto di partenza dell’attività è stato quello di visionare figure ed immagini di mezzi spaziali e di scegliere alcuni componenti che possano essere oggetto di manutenzione o sostituzione in volo. Sei componenti sono stati poi modellati al CAD, ed è stata condotta un’analisi ad elementi finiti (FEM) mediante il software MSC Patran/Nastran, con lo scopo di simulare la risposta strutturale nelle diverse condizioni di carico prese in considerazione. Seppur a livello qualitativo e del tutto preliminare, sono stati svolti dei confronti in termini di massa e tensioni per valutare in quali casi sembra sia conveniente realizzare un componente a terra con tecnologie tradizionali, e in quali sembra sia vantaggioso utilizzare nuove tecnologie di prototipazione rapida stampando direttamente il componente nello spazio.

Expanding the Design Space: Forging the Transition from 3D Printing to Additive Manufacturing

Thesis (Master's)--University of Washington, 2016-08